Determining the number of operators who set up the machines in a human-machine system is crucial for maximizing the benefits of automated production machines. A man-machine chart is an effective tool for identifying bottlenecks, improving process efficiency, and determining the optimal number of machines per operator. However, traditional man-machine charts are lacking in accounting for idle times, such as interruptions caused by other material handling equipment. We present an adjusted man-machine chart that determines the number of machines per operator, incorporating idleness as a penalty term. The adjusted man-machine chart efficiently deploys and schedules operators for the hole machining process to enhance productivity, where operators have various idle times, such as break times and waiting times by forklifts or trailers. Further, we conduct a simulation validation of traditional and proposed charts under various operational environments of operators’ fixed and flexible break times. The simulation results indicate that the adjusted man-machine chart is better suited for real-world work environments and significantly improves productivity.

Background: This study investigated quadriceps femoris muscle activity by comparing concentric and eccentric contractions with self-selective squat speed. Objectives: Study participants agreed in advance and included 30 male college students in their 20s without musculoskeletal system disease. Design: A randomized controlled trial. Methods: Participants who participated in this study agreed in advance and recruited 30 male college students in their 20s who had no disease with musculoskeletal system to conduct this study. When squatting at a self-selected speed, the subjects were evaluated using one-way ANOVA to compare concentric and eccentric contraction muscle activity. Results: There were significant differences between the rectus femoris, vastus medialis, and vastus lateralis regarding concentric contractions.contractions. There was a significant difference in vastus medialis but no significant difference between rectus femoris and vastus lateralis for eccentric contractions. Conclusion: During concentric contraction, all muscles and eccentric contractions indicated significant improvement in the vastus medialis. Therefore, to minimize knee joint injury and maximize efficient muscle activity, self-selected slow and moderate speeds based on self-selection speed when performing the sit-down motion during a squat and moderate speed with fast motions when performing the standing motion should be considered as high muscle activities.

The initial development plans for the six reactor designs, soon after the release of Generation IV International Forum (GIF) TRM in 2002, were characterized by high ambition [1]. Specifically, the sodium-cooled fast reactor (SFR) and very-high temperature reactor (VHTR) gained significant attention and were expected to reach the validation stage by the 2020s, with commercial viability projected for the 2030s. However, these projections have been unrealized because of various factors. The development of reactor designs by the GIF was supposed to be influenced by events such as the 2008 global financial crisis, 2011 Fukushima accident [2, 3], discovery of extensive shale oil reserves in the United States, and overly ambitious technological targets. Consequently, the momentum for VHTR development reduced significantly. In this context, the aims of this study were to compare and analyze the development progress of the six Gen IV reactor designs over the past 20 years, based on the GIF roadmaps published in 2002 and 2014. The primary focus was to examine the prospects for the reactor designs in relation to spent nuclear fuel burning in conjunction with small modular reactor (SMR), including molten salt reactor (MSR), which is expected to have spent nuclear fuel management potential.

Amorphous In-Ga-Zn-O (a-IGZO) thin film transistors (TFTs) with a coplanar structure were fabricated to investigate the feasibility of their potential application in large size organic light emitting diodes (OLEDs). Drain currents, used as functions of the gate voltages for the TFTs, showed the output currents had slight differences in the saturation region, just as the output currents of the etch stopper TFTs did. The maximum difference in the threshold voltages of the In-Ga-Zn-O (a-IGZO) TFTs was as small as approximately 0.57 V. After the application of a positive bias voltage stress for 50,000 s, the values of the threshold voltage of the coplanar structure TFTs were only slightly shifted, by 0.18 V, indicative of their stability. The coplanar structure TFTs were embedded in OLEDs and exhibited a maximum luminance as large as 500 nits, and their color gamut satisfied 99 % of the digital cinema initiatives, confirming their suitability for large size and high resolution OLEDs. Further, the image density of large-size OLEDs embedded with the coplanar structure TFTs was significantly enhanced compared with OLEDs embedded with conventional TFTs.

With South Korea increasingly focusing on nuclear energy, the management of spent nuclear fuel has attracted considerable attention in South Korea. This study established a novel procedure for selecting safety-relevant radionuclides for long-term safety assessments of a deep geological repository in South Korea. Statistical evaluations were performed to identify the design basis reference spent nuclear fuels and evaluate the source term for up to one million years. Safety-relevant radionuclides were determined based on the half-life criteria, the projected activities for the design basis reference spent nuclear fuel, and the annual limit of ingestion set by the Nuclear Safety and Security Commission Notification No. 2019-10 without considering their chemical and hydrogeological properties. The proposed process was used to select 56 radionuclides, comprising 27 fission and activation products and 29 actinide nuclides. This study explains first the determination of the design basis reference spent nuclear fuels, followed by a comprehensive discussion on the selection criteria and methodology for safety-relevant radionuclides.

Iron is an essential nutrient for mammalian cells. Most iron absorption occurs in the duodenal epithelial cells and is regulated by hepcidin, which is produced and secreted in the liver. High hepcidin levels can cause iron deficiency anemia due to iron absorption failure. Inside the cell, iron conjugates with a porphyrin ring and is placed with an iron coordinated to heme. One of the heme-binding proteins, known as progesterone receptor membrane component 1 (Pgrmc1), is a non-canonical progesterone receptor associated with diverse molecular gene regulation. Previous studies showed that Pgrmc1 is related to iron homeostasis via hepcidin; however, these mechanisms remain to be elucidated. In the present study, to investigate the role of Pgrmc1 in mammalian iron metabolism, we introduced Pgrmc1 knockout (KO) mice and performed molecular biological analyses using qPCR and western blotting. Pgrmc1 deficiency decreased Hamp mRNA expression and hepcidin protein levels. However, Pgrmc1 deficiency failed to decrease Hamp transcript expression and hepcidin protein levels in siPGRMC1-transfected HepG2 cells and primary Pgrmc1 KO hepatocytes, respectively. PGRMC1 knockdown cells revealed low HAMP mRNA levels upon cyclic AMP (cAMP) activation, suggesting that PGRMC1 promotes HAMP mRNA transcription via cAMP activation. It has been implicated that hepatic Pgrmc1 cannot control hepcidin directly; however, the internal environment caused by the lack of Pgrmc1 may potentially cause low hepcidin levels.

해사노동협약은 선원 인권 보호에 있어 전 세계적으로 성공적인 성과로서 국제노동기구에서 채택하였다. 특히, 이 협약의 선원근로계약 규정은 선원에게 양질의 근로와 생활 환경을 보장하기 위한 규정으로서 해사노동협약의 핵심으 로 인정되고 있다. 이러한 규정에도 불구하고 많은 회원국은 자국의 법률 시스 템에 핵심 규정을 완전히 반영하지 못하거나 실질적인 이행을 하지 못하고 있 는 상황이다. 특히 대표적인 선원 공급국이자 개발도상국인 베트남은 더욱 어 려운 실정이다. 따라서 이 논문에서는 해사노동협약의 선원근로계약에 관한 규 정을 중심으로 비교법적 연구 방법론을 통해 베트남 법제도의 차이를 분석하 고, 나아가 대표적인 해운 선진국인 대한민국의 선원법을 비교하여 베트남 법 제도의 문제점을 분석하고자 한다. 이를 통해 베트남의 해사노동협약 이행을 증진하기 위한 개선방안에 대해 논의하고자 한다.

The nuclear fuel that melted during the Fukushima nuclear accident in 2011 is still being cooled by water. In this process, contaminated water containing radioactive substances such as cesium and strontium is generated. The total amount of radioactive pollutants released by the natural environment due to the nuclear accident in Fukushima in 2011 is estimated to be 900 PBq, of which 10 to 37 PBq for cesium. Radioactive cesium (137Cs) is a potassium analog that exists in the water in the form of cations with similar daytime behavior and a small hydration radius and is recognized as a radioactive nuclide that has the greatest impact on the environment due to its long half-life (about 30 years), high solubility and diffusion coefficient, and gamma-ray emission. In this study, alginate beads were designed using Prussian blue, known as a material that selectively adsorbs cesium for removal and detection of cesium. To confirm the adsorption performance of the produced Prussian blue, immersion experiments were conducted using Cs standard solution, and MCNP simulations were performed by modeling 1L reservoir to conduct experiments using radioactive Cs in the future. An adsorption experiment was conducted with water containing standard cesium solution using alginate beads impregnated with Prussian blue. The adsorption experiment tested how much cesium of the same concentration was adsorbed over time. As a result, it was found that Prussian blue beads removed about 80% of cesium within 10-15 minutes. In addition, MCNP simulation was performed using a 1 L reservoir and a 3inch NaI detector to optimize the amount of Prussian blue. The results of comparing the efficiency according to the Prussian volume was shown. It showed that our designed system holds great promise for the cleanup and detection of radioactive cesium contaminated seawater around nuclear plants and/or after nuclear accidents. Thus, this work is expected to provide insights into the fundamental MCNP simulation based optimization of Prussian blue for cesium removal and this work based MCNP simulation will pave the way for various practical applications.

Copper hexacyanoferrate (Cu-HCF), which is a type of Prussian Blue analogue (PBA), possesses a specific lattice structure that allows it to selectively and effectively adsorb cesium with a high capacity. However, its powdery form presents difficulties in terms of recovery when introduced into aqueous environments, and its dispersion in water has the potential to impede sunlight penetration, possibly affecting aquatic ecosystems. To address this, sponge-type aluminum oxide, referred to as alumina foam (AF), was employed as a supporting material. The synthesis was achieved through a dip-coating method, involving the coating of aluminum oxide foam with copper oxide, followed by a reaction with potassium hexacyanoferrate (KHCF), resulting in the in-situ formation of Cu-HCF. Notably, Copper oxide remained chemically stable, which led to the application of 1, 3, 5-benzenetricarboxylic acid (H3BTC) to facilitate its conversion into Cu-HCF. This was necessary to ensure the proper transformation of copper oxide into Cu-HCF on the AF in the presence of KHCF. The synthesis of Cu-HCF from copper oxide using H3BTC was verified through X-ray diffraction (XRD) analysis. The manufactured adsorbent material, referred to as AF@CuHCF, was characterized using Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). These analyses revealed the presence of the characteristic C≡N bond at 2,100 cm-1, confirming the existence of Cu-HCF within the AF@CuHCF, accounting for approximately 3.24% of its composition. AF@CuHCF exhibited a maximum adsorption capacity of 34.74 mg/g and demonstrated selective cesium adsorption even in the presence of competing ions such as Na+, K+, Mg2+, and Ca2+. Consequently, AF@CuHCF effectively validated its capabilities to selectively and efficiently adsorb cesium from Cs-contaminating wastewater.

Plasma melting technology uses electrical arc phenomena such as lightning to create hightemperature sparks of about 1,600 degrees or more to meet waste disposal requirements through treatment and reduction without distinguishing radioactive waste generated during nuclear power plant operation and dismantling according to physical characteristics. Decommissioning radioactive waste scabbed concrete occurs when polishing and cutting the contaminated structure surface to a certain depth. In this study, Scabbed concrete containing paint was confirmed for volume reduction and disposal safety using plasma treatment technology, and it is planned to be verified through continuous empirical tests.

Once decommissioning begins, it is expected that large amount of radioactive wastes will be produced in a short period of time. The expected amount of radioactive wastes from Kori unit 1 NPP are approximately 80,000 drums (base on 200 L). By minimizing the amount of radioactive wastes generated through decontamination and reduction, KHNP has set the final target for the amount of radioactive wastes to be delivered to the disposal site at approximately 14,500 drums. Here, plasma torch melting technology is an essential technology for radioactive wastes treatment during nuclear power plants decommissioning and operation, because of its large volume reduction effects and the diversity of disposable wastes. KEPCO KPS was able to secure experience in operating Plasma Torch Melter (PTM) by conducting a research service for ‘development of plasma torch melting system advancement technology’ at KHNP-CRI. This study will compare kilo and Mega-Watt class PTM, largely categorized into facility configurations, operating parameters, and waste treatment. Based on this study, it would be desirable to operate PTM with approximate capacity according to the frequency and amount of waste production, and suggest volume for a kilo and Mega-watt class plasma torch in the melting furnace respectively. This plays to its strengths for both a kilo and Mega-watt class PTM.

A disposal of radioactive wastes is one of the urgent issues in worldwide. Considering upcoming plans for decommissioning of nuclear power plants, this problem is unavoidable and should be discussed very thoughtfully before long. There are variety of methods to deal with radioactive wastes, including Incineration process, conventional gasification process and plasma gasification process and so on. Among them, plasma gasification process is in the limelight due to its ecofriendly features and very large volume reduction effects. So, lots of countries like Japan, Taiwan, Russia, Bulgaria are already utilizing commercial plasma melting facilities and researching their own characteristics & disposal abilities and so on. Within the scope of this paper, I would like to introduce other countries current status of plasma melting facilities, and reach the conclusion on the directions to go for realistic radioactive wastes treatment.

APro, a process-based total system performance assessment (TSPA) tool for a geological disposal system, has a framework for simulating the radionuclide transport affected by thermal, hydraulic, mechanical or geochemical changes occurred in the disposal system. APro aims to be applied for the TSPA to long-term (> 100,000) evolution scenarios in real-world repository having more than 10,000 boreholes. In this large-scale TSPA, it is important not only to develop a high-performance numerical approach, but also to apply an efficient post-processing approach to massive spatiotemporal data. The post-processing refers to validating numerical analysis results, analyzing and evaluating target systems through data processing or visualization. Since APro uses COMSOL interface, the postprocessing function in COMSOL can be used. However, when the data size increases due to largescale numerical analysis, the time for the COMSOL post-processing increases, resulting in a problem that the analysis and evaluation are not performed effectively. In this case, it is possible to extract necessary data using the COMSOL exporting function and importing it into an external postprocessing program for the analysis and evaluation. In this study, the efficiency of external post-processing with extracted data from COMSOL was reviewed. And, we derived a proper data extraction approach (format and structure) that can increase efficiency of external post-processing.

Spent nuclear fuel management is a high-priority issue in South Korea, and addressing it is crucial for the country’s long-term energy sustainability. The KORAD (Korea Radioactive Waste Agency) is leading a comprehensive, long-term project to develop a safe and effective deep geological repository for spent nuclear fuel disposal. Within this framework, we have three primary objectives in this work. First, we conducted statistical analysis to assess the inventory of spent nuclear fuel in South Korea as of 2021. We also projected future generation rates of spent nuclear fuels to identify what we refer to as reference spent nuclear fuels. These reference spent nuclear fuels will be used as the design basis spent fuels for evaluating the safety of the repository. Specifically, we identified four types of design basis reference spent nuclear fuels: high and low burnup from PLUS7 (with a 16×16 array) and ACE7 (with a 17×17 array) assemblies. Second, we analyzed radioactive nuclides’ inventory, activities, and decay heats, extending up to a million years after reactor discharge for these reference spent nuclear fuels. This analysis was performed using SCALE/TRITON to generate the burnup libraries and SCALE/ORIGEN for source term evaluation. Third, to assess the safety resulted from potential radioactive nuclides’ release from the disposal canister in future work, we selected safety-related radionuclides based on the ALI (Annual Limit of Intake) specified in Annex 3 of the 2019-10 notification by the NSSC (Nuclear Safety and Security Commission). Conservative assumptions were made regarding annual water intake by humans, canister design lifetime, and aquifer flow rates. A safety margin of 10-3 of the ALI was applied. We selected 56 radionuclides that exceed the intake limits and have half-lives longer than one year as the safety-related radionuclides. However, it is crucial to note that our selection criteria focused on ALI and half-lives. It did not include other essential factors such as solubility limits, distribution coefficients, and leakage processes. So, some of these nuclides can be removed in a specific analysis area depending on their properties.

Deep borehole drilling is essential not only to select the host rock type for deep geological disposal of high-level radioactive waste (HLW), but also to identify the characteristics of the disposal site during the site selection process. In particular, since the disposal depth of HLW is considered to be over 300 m, deep borehole drilling must be performed. In deep borehole drilling, drilling design, excavation, and operation may vary depending on the rock type, drilling depth, and drilling purpose etc. This study introduced cases in which Korea was divided into four geotectonic structures and four representative rock types and conducted with a goal of 750 m drilling depth. Prior to this, a review of deep drilling cases conducted at domestic and abroad was presented. If sufficient time and cost are available, several drilling holes can be excavated for various purposes, but if not, one or two drilling holes should be used to achieve the objectives of various fields related to HLW disposal. The presence of bedding, strata or fault zones depending on the type of rock, etc. may affect drilling deviation or circulating water management. In addition, unlike drilling in general geotechnical investigation drilling, the use of polymers or grouting agents is limited to determine hydraulic and geochemical characteristics. This report introduces the experience considered during the design and drilling process of deep drilling in granite, gneiss, sedimentary rock, volcanic rock, etc., and is expected to be used as basic data when carrying out future HLW projects.

For the sake of future generations, the management of radioactive waste is essential. The disposal of spent nuclear fuel (SNF) is considered an urgent challenge to ensure human safety by storing it until its radioactivity drops to a negligible level. Evaluating the safety of disposal facilities is crucial to guarantee their durability for more than 100,000 years, a period sufficient for SNF radioactivity to become ignored. Past studies have proposed various parameters for forecasting the safety of SNF disposal. Among these, radiochemistry and electrochemistry play pivotal roles in predicting the corrosion-related chemical reactions occurring within the SNF and the structural materials of disposal facilities. Our study considers an extreme scenario where the SNF canister becomes compromised, allowing underground water to infiltrate and contact the SNF. We aim to improve the corrosion mechanism and mass-balance equation compared with what Shoesmith et al. proved under the same circumstances. To enhance the comprehensibility of the chemical reactions occurring within the breached SNF canister, we have organized these reactions into eight categories: mass diffusion, alpha radiolysis, adsorption, hydrate formation, solidification, decomposition, ionization, and oxidation. After categorization, we define how each species interacts with others and calculate the rate of change in species’ concentrations resulting from these reactions. By summing up the concentration change rates of each species due to these reactions, we redefine the mass-balance equations for each species. These newly categorized equations, which have not been explained in detail previously, offer a detailed description of corrosion reactions. This comprehensive understanding allows us to evaluate the safety implications of a compromised SNF canister and the associated disposal facilities by numerically solving the mass-balance equations.

The radionuclide management process is a conditioning technology to reduce the burden of spent fuel management, and refers to a process that can separate and recover radionuclides having similar properties from spent fuels. In particular, through the radionuclide management process, high heat- emitting, high mobility, and high toxicity radionuclides, which have a significant impact on the performance of disposal system, are separated and managed. The performance of disposal system is closely related to properties (decay heat and radioactivity) of radioactive wastes from the radionuclide management process, and the properties are directly linked to the radionuclide separation ratio that determines the composition of radionuclides in waste flow. The Korea Atomic Energy Research Institute have derived process flow diagrams for six candidates for the radionuclide management process, weighing on feasibility among various process options that can be considered. In addition, the GoldSim model has been established to calculate the mass and properties of waste from each unit process of the radionuclides management process and to observe their time variations. In this study, the candidates for the radionuclide management process are evaluated based on the waste mass and properties by using the GoldSim model, and sensitivity analysis changing the separation ratio are performed. And the effect of changes in the separation ratio for highly sensitive radionuclides on waste management strategy is analyzed. In particular, the separation ratio for high heat-emitting radionuclides determines the period of long-term decay storage.

Globally, the operation of nuclear power plants results in the production of a tremendous quantity of spent nuclear fuel. The methods for handling spent nuclear fuel can be categorized into three: storage, direct disposal and recycling. A technology designed to recycle accumulated spent nuclear fuel is pyropocessing. In pyroprocessing, various fission products (FPs) such as C-14, H-3, I-129 and Cs-137 are generated. Among these FPs, technetium (Tc-99) is a gaseous nuclear isotope with a long half-life and high mobility in the form of TcO4 - in aqueous solutions, making it essential to capture strictly in order to prevent radioactive contamination of the environment. In previous studies, ion-exchange or adsorption using MOFs (Metal Organic Frameworks) have been used to remove Tc-99. These methods, however, involve separation in aqueous solutions, not in the gaseous state. In this study, we developed a CaO-based adsorbent for capturing Re as a surrogate for radioactive Tc-99. Isopropyl alcohol (IPA) was employed as a pore-forming agent during the preparation of the adsorbents, and its effects on characteristics and adsorption performance were investigated. The size of the pores were analyzed from nitrogen (N2) adsorption isotherm analysis and mercury (Hg) intrusion curves. As a result, it was confirmed that the addition of IPA had a significant impact on the formation of macro-pores. Furthermore, this macroporous structure was found to enhance the adsorption performance of Re.

While many countries consider direct disposal of the spent nuclear fuels, they need to consider long-term disposal scenarios with severe accidents such as the contact between underwater and the spent nuclear fuel due to large defect of the canister. Radionuclides releases rapidly with contacting water or slowly with dissolution of UO2 matrix. The former is known as the ‘Instant Release’, and the latter is ‘Congruential Release’. Even though the instant release fractions (IRF) are much smaller than the congruential ones, IRF has to be treated carefully due to the fact that the instant releases lead to much larger value of the exposure dose rates than the congruential ones which proceed very slowly. It is known that the exposure dose rates by the instant releases are ~25 times larger than the one by the congruent release. The radionuclides from UO2 matrix migrate to the grain boundary, make bubbles, and make tunnels, which leads to instant releases of some radionuclides. The radionuclides in the gap between UO2 pellet and cladding can be also instantly released. In addition, the radionuclides in the crud are instantly released. But in this paper, nuclides from the crud are not regarded, due to the lack of the leaching data. Meanwhile, there’re some nuclides that released from the construction materials like the cladding, the Rod Cluster Control Assembly (RCCA), or the other metal parts. In this work, IRF values for major IRF nuclides such as Cs, I, Cl, Se for the reference PWR spent fuels of South Korea were evaluated based on the rationale from literatures’ review. In particular, these evaluations were done as the function of fission gas release (FGR), average discharge burnup, and fuel dimensions. In addition, the values of IRF for the other nuclides were also suggested based on the other institutes.