The development of separation method of radioactive tritium is imperative for treating tritiumcontaminated water originating from nuclear facilities. Polymer electrolyte membrane electrolysis technology represents a promising alternative to conventional alkaline electrolysis for tritium enrichment. Nevertheless, there has been limited research conducted thus far on the composition of membrane electrode assemblies (MEAs) specifically optimized for tritium separation, as well as the methods used for their fabrication. In this study, we conducted an investigation aimed at optimizing MEAs specifically tailored for tritium separation. Our approach involved the systematic variation of MEA components, including the anode, cathode, porous transport layer, and electrode formation method. The water electrolysis efficiency and the H/D separation factor in deuterated water (1%) were evaluated with respect to both the preparation method and the composition of the MEA. To assess the long-term stability of the MEAs, changes in cell voltage, resistance, and the active electrode area were analyzed using impedance analysis and cyclic voltammetry. Furthermore, we examined H/D separation factor both before and after degradation. The results showed that MEAs with different anode/cathode configurations and electrode formation methods improved the electrolysis efficiency compared to commercial MEAs. In addition, the degree of change in the resistance value was also different depending on the electrode formation method, indicating that the electrode formation method has a significant impact on the stability of the electrolysis system. Therefore, the study showed that the efficiency and long-term stability of the water electrolzer can be improved by optimizing the MEA fabrication method.

최근 친환경 노지 감귤원을 중심으로 알락하늘소 피해가 증가하고 있지만 효과적인 예찰 방법이 없는 실정이 다. 본 연구에서는 알락하늘소 성충 예찰을 위하여 카이로몬을 선발하였고, 알락하늘소가 다발생(>100마리)한 과원 3개소에서 유인력을 평가하였다. 시험 결과, 집합페로몬 단독처리 시 알락하늘소 암컷 성충에 대한 유인효 과를 확인할 수 있었지만 소수 개체만 유인이 되었고, 카이로몬(Kairomone) 단독 처리 시 알락하늘소 성충 포획 수가 증가하는 것을 확인할 수 있었다. 집합페로몬과 카이로몬을 동시 처리 시 알락하늘소가 대량으로 유인되는 것을 확인할 수 있었다. 이는 알락하늘소가 종내신호물질(집합페로몬)을 인지할 때 서식지로서 적합한지 판단 의 기준으로 기주식물의 존재여부를 동시에 확인하기 떄문인 것으로 판단된다.

For decontamination and quantification of trace amount of tritium in water, an efficient separation technology capable of enriching tritium in water is required. Electrolysis is a key technology for tritium enichment as it has a high H/T and D/T separation factors. To separate tritium, it is important to develop a proton exchange membrane (PEM) electrolyzer having high hydrogen isotope separation factor as well as high electrolyzer cell efficiency. However, there has not been sufficient research on the separation factor and cell efficiency according to the composition and manufacturing method of the membrane electrode assembly (MEA) Therefore, it is necessary to study the optimal composition and manufacturing method of the MEA in PEM electrolyzer. In this study, the H/D separation factor and water electrolysis cell efficiency of PEM electrolyzer were analyzed by changing the anode and cathode materials and electrode deposition method of the MEA. After the water electrolysis experiment using deionized water, the D/H ratio in water and hydrogen gas was measured using a cavity ring down spectrometer and a mass spectrometer, respectively, and the separation factor was calculated. To calculate the cell efficiency of water electrolysis, a polarization curves were obtained by measuring the voltage changes while increasing the current density. As a result of the study, the water electrolyzer cell efficiency of the MEA fabricated with different anode/cathode configurations and electrode formation methods was higher than that of commercial MEA. On the other hand, the difference in H/D separation factor was not significant depending on the MEA fabrication methods. Therefore, using a cell with high cell efficiency when the separation factor is the same will help construct a more efficient water electrolysis system by lowering the voltage required for water electrolysis.

In the design of a spent-fuel (SF) storage, the consideration of burnup credit brings the benefits in safety and economic views. According to it, various SF burnup measurement systems have been developed to estimate high fidelity burnup credit, such as FORK and SMOPY. Recently, there are a few attempts to localize the SF burnup measurement system in South Korea. For the localization of SF burnup measurement systems, it is very important to build the isotope inventory data base (DB) of various kinds of SFs. In this study, we performed DeCART2D/MASTER core follow calculations and McCARD single fuel assembly (FA) burnup analyses for Hanbit unit 3 and confirmed the characteristic of the isotope inventory over burnup. Firstly, the core follow calculations for Cycles 1~7 were performed using DeCART2D/MASTER code system. The core follow calculation is very realistic and practical because it considers the design conditions from its nuclear design report (NDR). Secondly, the Monte Carlo burnup analyses for single FAs were conducted by the McCARD Monte Carlo (MC) transport code. The McCARD code can utilize continuous energy cross section library and treat complex geometric information for particle transport simulation. Accordingly, the McCARD code can provide accurate solutions for burnup analyses without approximations, but it needs huge computing resources and time burden to perform whole-core follow calculations. Therefore, we will confirm the effectiveness of the single McCARD FA burnup analyses by comparing the DeCART2D/MASTER core follow results with the McCARD solution. From the results, the use of single FA burnup analyses for the establishment of the DBs will be justified. Various FAs, that have different 235U enrichments and loading pattern of fuel rods and burnable absorbers, were considered for the burnup analyses. In addition, the results of the sensitivity analyses for power density, initial enrichment, and cooling time will be presented.