Dry head end process is developing for pyro-processing at KAERI (Korea Atomic Energy Research Institute). Dry processes, which include disassembling, mechanical decladding, vol-oxidation, blending, compaction, and sintering shall be performed in advance as the head-end process of pyro-processing. Also, for the operation of the head-end process, the design of the connecting systems between the down ender and the dismantling process is required. The disassembling process includes apparatus for down ender, dismantling of the SF (Spent Fuel) assembly (16×16 PWR), rod extraction, and cutting of extracted spent fuel rods. The disassembling process has four-unit apparatus, which comprises of a down ender that brings the assembly from a vertical position to a horizontal position, a dismantler to remove the upper and bottom nozzles of the spent fuel assembly, an extractor to extract the spent fuel rods from the assembly, and a cutter to cut the extracted spent fuel rods as a final step to transfer the rod-cuts to the mechanical decladding process. An important goal of dismantling process is the disassembling of a spent nuclear fuel assembly for the subsequent extraction process. In order to design the down ender and dismantler, these systems were analyzed and designed, also concept on the interference tools between down ender and dismantler were considered by using the solid works tool.

The Korea Atomic Energy Research Institute is developing a nuclide management process that separates high heat, high mobility, and long half-life nuclides that burden the disposal of spent fuel, and disposes of spent fuel by nuclide according to the characteristics of each nuclide. Various offgases (volatile and semi-volatile nuclides) generated in this process must be discharged to the atmosphere below the emission standard, so an off-gas trapping system is required. In this study, we introduce the analysis results of the parameters that affect the design of the off-gas trapping system. The analyzed contents are as follows. The physical quantities of the Cs, Tc/se, and I trapping filters according to the amount of spent nuclear fuel, the maximum exothermic temperature of the Cs trapping filter and the absorbed dose by distance by Cs radioactivity were analyzed according to the amount of spent nuclear fuel. In addition, a three-dimensional CFD (Computational Fluid Dynamics) analysis was performed according to operating parameters by simply modeling the off-gas trapping system, which is easy to modify mechanical design parameters. It is considered that the analysis results will greatly contribute to the development of the off-gas trapping system design requirements.

Separation of high heat generating-radioactive isotopes from spent nuclear fuel is an important issue because it can reduce the final disposal area. As one of the technologies that can selectively separate only high heat generating-radioactive isotopes without dissolving spent fuel, the methods using molten salt have recently attracted attention. Although studies on chemical changes of Sr oxides in molten salts have been reported, they have limitation in that alternative oxide reagents rather than oxide fuel were used. In this study, the separation behaviors of Sr from simulated oxide fuel using various molten salts were investigated. A powder type containing 95.7wt% of U and 0.123wt% of Sr was used as the simulated oxide fuel. LiCl, LiCl-CaCl2, MgCl2, LiCl-KCl-MgCl2 and NaCl-MgCl2 were used as molten chloride salts. The separation of Sr from the simulated oxide fuel was conducted by loading it in porous alumina basket and immersing it in a salt. The concentration of Sr in the salt was measured by ICP analysis after sampling the salt outside the basket using dip-stick technique. The separation efficiencies of Sr from simulated oxide fuel using the salts were compared. Furthermore, the causes of their separation efficiency were systematically investigated.

This study evaluated the effect of a combination of acetaminophen (AAP), vitamin C (VC) and thioctic acid (TA) on reducing serum cortisol concentrations in mice with foot-and-mouth disease (FMD) vaccination. For 5 days from 3 days before FMD vaccination to 2 days after vaccination, mice were orally administered with AAP 600 mg/kg feed (n=25, AAPT), combination of AAP 600 mg and VC 200 mg per kg feed (n=25, AVCT) and combination of AAP 600 mg, VC 200 mg and TA 20 mg per kg feed (n=25, AVTT), respectively. From day 1 to day 7 after FMD vaccination, the cortisol concentration of all groups treated with the drug was significantly decreased compared to that of the positive control group with FMD vaccination (p<0.05). In conclusion, the combined treatment of AAP, VC and TA was the most effective in relieving stress from FMD vaccination compared to the single treatment.