The decommissioning of nuclear power plants will generate a lot of low and intermediate-level radioactive waste (LILW), and preliminary radioactive evaluation for these wastes should be carried out before decommissioning work. Mainly, Concrete, Carbon Steel, Stainless Steel-304 (SS304) and Inconel are used in many parts of nuclear power plants and considered as main resource of nuclear wastes. Depending on the material location, the number of neutrons irradiated to material varies, which can range from self-disposal waste to LILW. In this paper, activation analysis was performed to compare the radiation dose according to the presence or absence of impurity elements present in SS304. For the calculation, SS304 composition and impurity elements were used as described in the report of NUREG-3474. This report lists 41 impurity elements for SS304 and other materials. Calculation code is used ORIGEN-S module in SCALE 6.1 code. Neutron flux is used as arbitrary value that around 1E+11 level and irradiation time is set as 30 year with 10-year cooling time. In the ORIGEN-S calculation, 1g of SS304 is used for easy calculation of specific activity. The ORIGEN-S calculation results are as follows. All impurity elements contained case calculated 9.32E+07 Bq activity. In the absence of all impurity elements case and most cases shows that total Becquerel value after 10-year cooling time around 9.11E+07 Bq, and Co impurity case had larger result. The calculation was performed again by increasing the amount of impurity substances by 100 times to perform the sensitivity evaluation more reliably. Representatively, Li, N, Co, and Ba impurity elements cases were calculated to have a particularly high Becquerel. Especially Co impurity element case, a total Becquerel of 3.03E+08 was calculated. Accordingly, evaluation of impurities mixed in SS304 must be considered, and in particular, the inclusion rate for Co must be considered.

Advanced countries in the field of nuclear research and technology are currently examining the feasibility of deep geological disposal as the most appropriate method for the permanent management of high-level radioactive waste, with no intention of future retrieval. Deep geological disposal involves the placement of such waste deep underground within a stable geological formation, ensuring its permanent isolation from the human environment. To guarantee the enduring isolation and retardation of radionuclides with half-lives spanning tens of thousands to millions of years from the broader ecosystem, it is imperative to comprehend the long-term evolution of deep disposal systems, especially the role of natural barriers. These natural barriers, typically consisting of bedrock, encase the repository and undergo long-term evolutions due to tectonic movements and climate variations. For the effective disposal of high-level radioactive waste, a thorough assessment of the site’s long-term geological stability is essential. This necessitates a comprehensive understanding of its tectonic evolution and development characteristics, including susceptibility to seismic and magmatic events like earthquakes and intrusions. Furthermore, a detailed analysis of alterations in the hydrogeological and geochemical environment resulting from tectonic movements over extended time frames is required to assess the potential for the migration of radionuclides. In this paper, we have examined international evaluation methodologies employed to elucidate the predictive long-term evolution of natural barriers within disposal systems. We have extracted relevant methods from international case studies and applied a preliminary scenario illustrating the long-term evolution of the geological environment at the KURT (KAERI Underground Research Tunnel) site. Nevertheless, unlike international instances, the scarcity of quantitative data limits the depth of our interpretation. To present a dependable scenario in the future, it is imperative to develop predictive technologies aimed at comprehensively studying the geological evolution processes in the Korean peninsula, particularly within the context of radioactive waste disposal.

Blockchain is an immutable ledger that records transactions and tracks assets using a common communication protocol. It stores a copy of the blockchain and implements a consensus function to verify transactions. Blockchain is applied to industries beyond finance, such as retail, to maintain security and transparency. Consumers with knowledge of blockchain technology are likely to be affected when evaluating products with blockchain embedded, impacting their product evaluation. The study investigates the impact of blockchain technology on consumers' product evaluation and how knowledge of blockchain and product quality moderate its effects.

Recently, the necessity of designing and applying tool materials that perform machining of difficult-to-cut materials in a cryogenic treatment where demand is increasing. The objective of this study is to evaluate the performance of cryogenically treated WC-5 wt% NbC hard materials fabricated by a pulsed current activated sintering process. The densely consolidated specimens are cryogenically exposed to liquid nitrogen for 6, 12, and 24 h. All cryogenically treated samples exhibit compressive stress in the sintered body compared with the untreated sample. Furthermore, a change in the lattice constant leads to compressive stress in the specimens, which improves their mechanical performance. The cryogenically treated samples exhibit significant improvement in mechanical properties, with a 10.5 % increase in Vickers hardness and a 60 % decrease in the rupture strength compared with the untreated samples. However, deep cryogenic treatment of over 24 h deteriorates the mechanical properties indicating that excessive treatment causes tensile stress in the specimens. Therefore, the cryogenic treatment time should be controlled precisely to obtain mechanically enhanced hard materials.

Concrete waste generated in the result of dismantling a concrete structure in a radiation control area and refractory brick waste generated from uranium pellet sintering furnace are surface-contaminated by uranium particle of which the enrichment is below 5%. These wastes are hard to decontaminate so it was necessary to develop the process for its disposal. So, we developed the Process Control Plan (PCP) for disposal of radioactive concrete waste describing a whole sequence of disposal and inspecting procedures based on the KNF Radioactive Waste Quality Assurance Plan (KN-WQAP) established in 2021. Based on the PCP, we crushed the concrete waste by jaw-crusher. Then we sieved the crushed concrete waste and removed the particle of which size is below 0.3 mm, using sieve-vibrator where the 0.3 mm mesh-sized sieve is installed inside. Before conducting the crush-sieving method based on the PCP, we conducted Process Control Assessment (PCA) based on the KN-WQAP. The purpose of the PCA is to check whether the output of the process satisfies the Acceptance Criteria of Korea Radioactive Waste Agency (KORAD) so that we could confirm the validity of the PCP. The evaluation item of the PCA is a particulate size verification test. The test is passed only if the component ratio of a particle size below 0.2 mm is less than 15% and the particle size below 0.01 mm is less than 1%. The very first 3 drums passed the test, so we began applying the PCP to whole target drums. In the process of conducting the crush-sieving method in earnest, qualified inspectors based on KNWQAP participated conducting sampling, measuring and checking whether a foreign material was included. They tested samples and packaged drums regarding 5 spheres of general, radiological, physical, chemical and biological characteristic. KNF disposed concrete and refractory brick waste by the crush-sieving method so that KNF could take over 100 drums to KORAD in 2021. But, it is needed to be improved that a dust size below 0.3 mm is generated as a secondary waste which needs to be solidified for the final disposal and the work environment is not good enough because of the dust.

Self-Powered Neutron Detector (SPND) is one of devices for in-core fluxes detecting without external electricity source. SPND consisted with emitter, insulator and collector. When neutrons reacted with emitter material, it generates electrons and these electrons cross insulator area to make electric signal in collector area. For calculating sensitivity of SPND with Monte-Carlo code such as MCNP, many physical components must be considered. Cobalt shows that prompt signal and relatively low signal comparing with other delayed signal SPNDs. Initial sensitivity was calculated as 4.28×10−22 A/nv-cm for one electron. Due to Cobalt’s complex decay chain and maintaining high efficiency of SPND, it is necessary to analysis the effect of activation of emitter. Therefore, the DPA (Displacements Per Atom) assessment and activation analysis of the detector components have been evaluated with MCNP 6.2 and ORIGEN-S. With these activation analysis results, that is expected to be used to determine the shielding thickness of the storage system.

Angiolymphoid hyperplasia with eosinophilia (ALHE) is a vascular inflammatory disease characterized by painless mass in the dermis, subcutaneous tissue, or both in the head and neck region. However, occurrence in the oral mucosa is extremely rare. In this study, we report a case of ALHE that occurred on the upper lip and discuss the histopathological features and management.

Even in an era where 8-meter class telescopes are common, small telescopes are considered very valuable research facilities since they are available for rapid follow-up or long term monitoring observations. To maximize the usefulness of small telescopes in Korea, we established the SomangNet, a network of 0.4{1.0 m class optical telescopes operated by Korean institutions, in 2020. Here, we give an overview of the project, describing the current participating telescopes, its scientic scope and operation mode, and the prospects for future activities. SomangNet currently includes 10 telescopes that are located in Australia, USA, and Chile as well as in Korea. The operation of many of these telescopes currently relies on operators, and we plan to upgrade them for remote or robotic operation. The latest SomangNet science projects include monitoring and follow-up observational studies of galaxies, supernovae, active galactic nuclei, symbiotic stars, solar system objects, neutrino/gravitational-wave sources, and exoplanets.