The clearwing moth, Synanthedon bicingulata (Staudinger, 1887), is a pest that infests various species of cherry trees. However, genetic information regarding the genus Synanthedon including S. bicingulata, is limited. In this study, we sequenced a complete mitochondrial genome (mitogenome) of the species. The 16,255 bp of S. bicingulata mitogenome differs from the typical gene arrangement formed in Lepidoptera: trnQ-trnS2-trnM-trnI arrangement between the A+T-rich region and the ND2 junction. Moreover, the genome has untranslated repetitive sequences in the intergenic space between lrRNA and trnV, as well as the CGA start codon in COI and the TTG start codon in ATP8. Similar observations are noted in species belonging to the tribe Synanthedonini within the genus Synanthedon.

The radiological characterization of SSCs (Structure, Systems and Components) plays one of the most important role for the decommissioning of KORI Unit-1 during the preparation periods. Generally, a regulatory body and laws relating to the decommissioning focus on the separation and appropriate disposal or storage of radiological waste including ILW (intermediate level waste), LLW (low level waste), VLLW (very low level waste) and CW (clearance waste), aligned with their contamination characteristics. The result of the preliminary radiological characterization of KORI Unit-1 indicated that, apart from neutron activated the RV (reactor vessel), RVI (reactor vessel internals), and BS (biological shielding concrete), the majorities of contamination were sorted to be less than LLW. Radiological contamination can be evaluated into two methods. Due to the difficulties of directly measuring contamination on the interior surfaces of the pipe, called CRUD, the assessment was implemented by modeling method, that is measuring contamination on the exterior surfaces of the pipes and calculating relative factors such as thickness and size. This indirect method may be affected by the surrounding radiation distribution, and only a few gamma nuclides can be measured. Therefore, it has limitation in terms of providing detailed nuclide information. Especially, α and β nuclides can only be estimated roughly by scaling factors, comparing their relative ratios with the existing gamma results. To overcome the limitation of indirect measurement, a destructive sampling method has been employed to assess the contamination of the systems and component. Samples are physically taken some parts of the systems or components and subsequently analyzed in the laboratory to evaluate detailed nuclides and total contamination. For the characterization of KORI Unit-1, we conducted the radiation measurement on the exterior surfaces of components using portable instruments (Eberline E-600 SPA3, Thermo G20-10, Thermo G10, Thermo FH40TG) at BR (boron recycle system) and SP (containment spray system) in primary system. Based on these results, the ProUCL program was employed to determine the destructive sample collection quantities based on statistical approach. The total of 5 and 8 destructive sample quantities were decided by program and successfully collected from the BR and SP systems, respectively. Samples were moved to laboratory and analyzed for the detail nuclide characteristics. The outcomes of this study are expected to serve as valuable information for estimating the types and quantities of radiological waste generated by decommissioning of KORI Unit-1.

벚나무류 수목은 생활권 수목(도시공원, 가로수 등)으로 전국에서 가장 많이 식재되고 있으며 전라 남도 또한 벚나무류 수목이 가로수 중 가장 많은 비율을 차지하고 있다. 복숭아유리나방은 농업환경 외에도 생활권 녹지공간에서도 벚나무류 수목을 가해하여 피해를 발생시키고 있는 것으로 보고되고 있으나, 생활권 수목과 산림에서의 관련 연구는 그 필요성에 비해 미흡한 상황이다. 본 연구는 전라남 도 내 생활권 수목을 기주로 하여 발생하는 복숭아유리나방의 발생소장을 조사하여 생활권 녹지공간 을 관리하는 기초자치단체들의 효용성 있는 방제 전략 수립에 기여하고자 한다. 복숭아유리나방의 발생 확인을 위해 육안 확인이 용이한 피해흔을 세 가지로 분류하였으며, 성페로몬 루어와 트랩으로 복숭아유리나방 성체를 유인･채집하였다. 그 결과, 4월 중순 첫 우화를 확인하였으며, 5월 중순과 8월 중순에 2번의 우화 최성기를 확인하여 이때의 유효적산온도를 조사하였다. 또한, 채집된 개체들 의 종 확인 및 유전적 다양성 확인을 위해 mitochondrial 내 cytochrome oxidase subunit I (COI) 유전자 염기 서열의 분석을 수행하였다.

In this study, an experiment was conducted on the domestic cultivar 'White and Cool' on a farm in Taean to compare the effects of conventional soil cultivation and net cultivation to increase yield and reduce labor input time during outdoor gladiolus cultivation. The above- and below-ground growth, yield, and input labor time were investigated after cultivating half of the seedlings using the conventional cultivation method and the other half using the net cultivation method. There was no difference in the above- or below-ground growth between net cultivation and conventional cultivation. However, the labor input time decreased 2.57 times, the yield of the irrigated area increased by 3%, and the self-fertilization yield increased by 28%. Based on these results, several factors should be considered during net cultivation. First, loose netting should be used for root development. Second, care should be taken while flattening when planting seedlings, and after sowing, the area should be covered with a net to prevent drying. Third, after completion of the installation, compaction should be performed to ensure close contact between the soil and netting, and after removing the space between the nets, the seedlings should be irrigated to induce early rooting.

High-entropy alloys (HEAs) are attracting attention because of their excellent properties and functions; however, they are relatively expensive compared with commercial alloys. Therefore, various efforts have been made to reduce the cost of raw materials. In this study, MIM is attempted using coarse equiatomic CoCrFeMnNi HEA powders. The mixing ratio (powder:binder) for HEA feedstock preparation is explored using torque rheometer. The block-shaped green parts are fabricated through a metal injection molding process using feedstock. The thermal debinding conditions are explored by thermogravimetric analysis, and solvent and thermal debinding are performed. It is densified under various sintering conditions considering the melting point of the HEA. The final product, which contains a small amount of non-FCC phase, is manufactured at a sintering temperature of 1250oC.

The carbon anode material for lithium-ion battery was prepared by pyrolysis fuel oil and waste polyethylene terephthalate (PET) additive. The pitch was synthesized as a medium material for carbon anode by heat treatment. The waste PET additive improved the softening point and thermal stability of the pitch. La and Lc of the anode material (heat-treated pitch) increased at higher treatment temperature but decreased by waste PET additive. The electric capacity was evaluated based on effects of defective cavity and developed graphite interlayer, respectively. When the La and Lc of the anode material decreased, the electric capacity by cavity increased based on defective graphite structure. Therefore, the addition of waste PET causes the improved capacity by the cavity. The anode material which has a high efficiency (over 95%) and C-rate (95%, 2 C/0.1 C) was obtained by controlling the process of heat treatment and PET addition. The mechanism of lithium-ion insertion was discussed based on effects of defective cavity and developed graphite interlayer.