검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 10

        1.
        2017.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        As the national income grows, there is a growing demand for buildings that require long span structures such as exhibition facilities, sports facilities, special industrial facilities, and aerospace facilities. Single-layer latticed dome is one of representative llong span structures. But single layer latticed domes are apt to occur the unstable phenomena that are called “buckling” because of the lack of strength of members and instability of structures, etc. In the previous study, the structural stability of a single-layer lattice dome was roughly grasped by a frame structural system using a ready-made steel when a self-weight and a snow load were applied to a single-layer latticed dome having a span of 300 m and a height of 75 m. However, a systematic study of a 300m single layer lattice dome with various rise-span ratios was not performed. Therefore, it is necessary to study various conditions of this structure because the researchers do not have much research data to apply to actual design. Therefore, the purpose of this study is to verify the buckling characteristics of span 300M single-layer latticed dome with rise-span ratio
        4,000원
        2.
        2017.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In recent years, single layer latticed domes have attracted many designers and researchers’s attention all over the world, because single layer latticed domes as space structure are of great advantage in not only mechanical rationality but also function, fabrication, construction and economic aspect. Yamada developed the shape factor S which represents the shape of spherical latticed dome from a structural perspective as well as a geometric perspective. According to a prior study, the structural behavior and the buckling characteristics of the latticed dome were mostly noticeable when the shape factor of latticed dome was in the range of 1.5 to 5. That is, S, in the range of 1.5 to 5, are able to estimate not only overall buckling, but also member buckling and nodal buckling. In this study, we developed shape models using various size of members with the fixed rise-span ratio. One particular characteristic of the latticed dome is that it is not only light in weight but also high in strength. But the aiming at the use of light-weight materials and at the minimized section of members may result in buckling to cause an unstable state of the overall structure when the external force reaches a limitation. Especially, the structural strength is disadvantageous to the snow loads than the earthquake loads because of light-weight, and is greatly affected by the conditions of loading. This paper is to develop the structural stability according to the shapes and load conditions for single-layer latticed spherical dome with 300m span.
        4,000원
        3.
        2015.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The roof grid of single-layer space frame structure, for Energy Core of Incheon Airport Second Terminal, is very simple and aesthetic, but it is apt to buckle under external force because of mild curvature and complex shape. The object of this study is to estimate the stability of single-layer space frame structures for Energy Core of Incheon Airport Second Terminal with the analytical conditions of structural design. The results show that the buckling load of model(pin-pin, uniform load, rigid joint), that is, the most similar model to the analytical conditions of structural design. was 10.7kN/㎡.
        4,000원
        4.
        2014.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Construction of vinyl house structures is increasing because they do not have a large cross section as non-permanent structures. Vinyl house structures are apt to collapse by snow load because they have a small size member as a temporary building. Therefore, it is very important to ensure not only the stiffness of the individual member, but also the overall stability of three-dimensional arch-type vinyl house structures. The purpose of this study is to estimate the stability of arch-type vinyl house structures that have a various curvature under the vertical load such as snow load. As a result of the study, the buckling load of V27 model is the largest, and the values of buckling load have a tendency to increase with increasing H(height of arch) in the case of H≤2.75m, but to decrease with increasing H in the case of H≥2.75m
        4,000원
        5.
        2013.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The circular hollow section is usually used for member of main frame to carry the external load in single layer lattice dome. But, the H-shaped section may be used for member of main frame since it is convenient for attaching roof panels. Single layer lattice domes have various buckling characteristics, such as the overall buckling, the member buckling, and nodal buckling. The purpose of this study is to compare buckling characteristics of single-layer lattice domes in which the H-shaped steel section as the existing domestically-produced structural steel is used as main frames to those of domes in which a circular hollow section is used as main frames.
        4,000원
        6.
        2012.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The large-space single-layer lattice dome is relatively simpler in terms of the arrangement of the various framework members and of the design of the junction than the multi-layered lattice dome, can reduce the numbers and quantity of the framework members, and has the merit of exposing the beauty of the framework as it stands. The single-layer lattice dome, however, requires a stability investigation of the whole structure itself, along with an analysis of the stress of the framework members, because an unstable phenomenon called "buckling" occurs when its weight reaches critical levels. Many researchers have systematically conducted researches on the stability evaluation of the single-layer lattice dome. No construction case of a single-layer lattice dome with a 300-m-long span, however, has yet been reported anywhere in the world. The large-space dome structure is difficult to erect due to the gigantic span and higher ceiling compared with other common buildings, and its construction cost is generally huge. The method of erecting a structure causes major differences in the construction cost and period. Therefore, many researchers have been conducting various researches on the method of erecting such structure. The step-up method developed by these authors can reduce the construction cost and period to a great extent compared with the other general methods, but the application of this method inevitably requires the development of system supports in the center section as well as pre-existing supports in the boundary sections. In this research, the safety during the construction of a single-layer lattice dome with 300-m-long span using pre-existing materials was examined in the aspect of structural strength, and the basic data required for manufacturing the supports in the application of the step-up method developed by these authors during the erection of the roof structure were obtained.
        4,000원
        7.
        2008.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 막구조물의 장력 측정을 위한 휴대용 막장력측정기기의 개발을 목적으로 한다. 2축시험기에 장착된 막의 장력을 간이 측정기에 의해 측정하여 구한 실험 데이터를 근거로 효율적인 2축방향 막 장력측정기기를 개발하는데 그 목적이 있다. 연구결과 개발된 휴대용 간이 장력측정기기는 정량적이고 정성적인 측면에서 데이터의 정밀도가 매우 높아 향후 상용제픔으로도 개발이 가능함을 알 수 있었다.
        4,000원
        8.
        2008.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        단층 래티스 돔은 경량이면서도 높은 강성을 가지므로 대공간 구조물로서 유리하며, 이 구조물은 기둥 없이 널은 공간을 확보해야하는 구조적 특성으로 인하여 시공시 불안정 현상이 발생할 수 있다. 현재 국내에서 대공간 지붕구조물의 설치 방법으로 가장 많이 도입되고 있는 Erection공법은 Block공법이며, 이 공법은 지상에서 조립한 대공간 지붕 골조를 크레인 등으로 소정의 위치까지 들어 올려 지붕구조를 완성해 가는 설치 공법이다. Block 공법에 있어서 인양할 포인트를 선정하는 작업은 대단히 중요하다. 즉, 인양 시 골조의 변형과 좌굴 등에 대해서 가장 안전하고 경제적인 절점을 인양 포인트로 선정할 필요가 있다. 따라서 본 연구에서는 가장 안전하고 경제적인 Erection을 위한 기초자료를 얻기 위하여 삼각형 네트워크를 갖는 단층 래티스 돔의 Erection 시 인양 포인트에 따른 구조물의 거동 및 좌굴 특성을 연구하는데 그 목적이 있다. 얻어진 결론은 1) 돔의 높이 H가 작을수록 인양위치에 따른 좌굴내력의 영향이 큰 것을 알 수 있었으며, 반대로 돔의 높이 H가 클수록 인양위치에 따른 좌굴내력의 영향은 미미한 것을 알 수 있었다. 2) 인양 위치에 관계없이 인양로프 길이에 따른 좌굴내력의 영향은 크지 않은 것을 알 수 있었다.
        4,000원
        9.
        2007.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        최근 산업 발전과 더불어 대공간 건축물의 수요가 급증하고 있다. 이 분야 선진 기술은 지간 300m 이상의 대공간 건축물 실현도 가능하게 하고 있다. 대공간 구조에는 쉘구조, 스페이스 프레임 구조, 막구조, 케이블구조 등이 있다. 대공간 건축물은 기둥 없이 넓은 공간을 확보해야 하는 구조적 특성 때문에 설계초기 단계에서부터 시공문제를 병행하여 검토할 필요가 있다. 대공간 건축물 시공에 있어서 erection 공법은 공사비용, 공사기간 그리고 안전성 등에 큰 영향을 주는 것으로 알려져 있다. 대공간 건축물 erection 공법은 현장 여건 및 제반 조건에 따라서 그 수를 헤아릴 수 없을 정도로 많고 다양하지만, 대표적인 공법으로는 Element 방식, Block 방식, Sliding 방식, Lift-up 방식 그리고 복합방식 등이 있다. 본 연구에서는 기존 대공간 건축물을 대상으로 시공당시 적용한 erection공법을 조사하여 이것을 규모별, span별, 층고별, 구조형식별로 분석 및 검토하여 향후 대공간 건축물의 효율적 erection 공법 개발을 위한 기초 자료를 제공하는데 그 목적이 있다.
        4,000원
        10.
        2004.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Researches on spherical shell which is most usually applied have been completed by many investigators already and generalized numerical formula was derived. But the existent researches are limited to those on spherical shell with isotropic or orthotropic roof stiffness, periodic distribution of roof stiffness that can be caused by spherical and latticed roof system is not considered. Therefore, the object of this study is to develop a structural analysis program to analyze spherical shells that have periodicity of roof stiffness distribution caused by latticed roof of large space structure, grasp buckling characteristics and behavior of structure.
        4,000원