This study presents the fabrication and application of a graphene-assisted voltammetry platform for the sensitive detection of nitrate ions in PM2.5 (atmospheric aerosols with a maximum diameter of 2.5 μm). The MoS2/ reduced graphene oxide/ glassy carbon electrode ( MoS2/rGO/GCE) was prepared using a simple and efficient electrochemical deposition method. The rationale behind selecting MoS2/ rGO stems from their individual properties that, when combined, can enhance the electrode’s performance. MoS2 offers excellent electro-catalytic activity and selectivity for nitrate ion detection, while rGO provides high conductivity and a large surface area for enhanced sensitivity. The electrochemical performance of MoS2/ rGO/GCE was investigated and compared with MoS2/ GCE and bare GCE using cyclic voltammetry and electrochemical impedance spectroscopy. The results demonstrated that MoS2/ rGO/GCE exhibited enhanced electro-catalytic activity, high conductivity, and improved selectivity for nitrate ion detection. The optimal pH value for detecting nitrate ions was determined to be 8.0. Differential pulse voltammetry (DPV) was employed to investigate the linear range and detection limit of nitrate ions on MoS2/ rGO/GCE, resulting in a linear range from 1 to 300 μM and a detection limit of 0.35 μM. The reproducibility and the stability of MoS2/ rGO/GCE were assessed, showing satisfactory performance. Real sample analysis from Chengdu City showed a strong correlation between the results obtained using MoS2/ rGO/GCE and ion chromatography, highlighting its potential application in monitoring nitrate ions in PM2.5. The findings of this study contribute to the development of a graphene-assisted voltammetry platform for sensitive nitrate ion detection in PM2.5, offering potential benefits for real-time air pollution monitoring and environmental health assessments.

This article delves into the development of Japanese Chinese character variations, and how they fit into the broader study of Chinese characters. By examining the differences between early Japanese kanji and modern Japanese writing systems, as well as the varying approaches of Chinese and Japanese scholars in studying Japanese kanji, we can propose a more fitting classification and naming method better suited to studying Chinese characters. To that end, we take the Wamyō Ruiju Shō (倭名類聚抄) as an example, exhaustively sorting out the situation of variant characters in the manuscript across different eras, and referring to other ancient Chinese dictionaries from the same period. This article introduces concepts like “inherited variants” and “Japan saved variants” to make studying these characters more comprehensive.

Cracks are an inevitable problem during the use of materials, and flexible sensors with self-healing capability are of great importance for applications in wearable devices and skin-like electronic devices. This paper prepared self-healing flexible strain sensors by compounding self-healing polyurethane with carbon nanotubes. First, by changing the ratio of disulfide bonds, a good balance between mechanical properties and self-healing efficiency was achieved in the prepared self-healing polyurethane. The most balanced sample reached 12.28 MPa in tensile strength, after 24 h of self-repair at 30 °C, the tensile strength was 7.75 MPa, and the self-repair efficiency was 63.11%; after 24 h of self-repair at 80 °C, the tensile strength was 11.64 MPa, and the self-repair efficiency reached 94.79%. Then the sensors prepared by compounding with carbon nanotubes showed a good electrochemical response, and both slow and fast repeated bending of the finger wearing the sensors yielded significantly different electrical signal changes, and the sensors were cut off and still had the same function after self-repair at 30 °C, demonstrating their excellent potential for applications in soft robots, wearable devices, etc.

Carbon nanotubes (CNTs) were added into the self-healing polyurethane materials as conductive filler, the mass fraction of carbon nanotubes was adjusted, and 1% polyaniline was doped. The conductive self-healing polyurethane composites with different carbon nanotubes content (PU)-1/3/5/8/10 were prepared, and analyzed and tested. The result shows that the permeability threshold value of the composite material is 8wt%, and the comprehensive performance of the composite material PU-8 is the best; the resistance of PU-8 is 1278Ω, PU-8P has a resistance of 1400Ω; using an infrared camera, it can be seen that the material can reach 143.3 °C under the DC current of 0.1A, reaching the temperature condition when the material is repaired; the swelling test shows that the PU-8P equilibrium swelling rate is 177%, the gel content is 52.67%, and there is no dissolution in dimethyl sulfoxide. Solvent stability is better than PU-8;DSC test shows that the glass transition temperature of the soft segment of PU-8P is 43 °C, and the glass transition temperature of the hard segment is − 55 °C, which is not much different from that of PU-8; TG test shows that the epitaxial starting temperature of PU-8P is 365 °C; the observation photo is magnified by a stereo microscope at ten times and the PU-8P sample is cut of in the middle at room temperature, applying a constant voltage of 30 V, the cracks disappeared. The material cracks realized self-healing with electricity, and the repair efficiency reached 20.5%.

This study investigated the arsenide removal by using mesoporous CoFe2O4/ graphene oxide nanocomposites based on batch experiments optimized by artificial intelligence tools. These nanocomposites were prepared by immobilizing cobalt ferrite on graphene oxide and then characterized using various techniques, including small angle X-ray diffraction, high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy. Artificial intelligence tools associated with response surface methodology were employed to optimize the conditions of the arsenide removal process. The results showed that back propagation neural network combined with genetic algorithm was suitable for the arsenide removal from aqueous solutions by the nanocomposites based on the minimum average values of absolute errors and the value of R2. The optimal values of the four variables (operating temperature, initial pH, initial arsenide concentration, and contact time) were found to be 25.66 °C, 7.58, 10.78 mg/L and 46.41 min, and the predicted arsenide removal percentage was 84.78%. The verification experiment showed that the arsenide removal percentage was 86.62%, which was close to the predicted value. Three evaluation methods (gradient boosted regression trees, Garson method and analysis of variance) all demonstrated that the temperature was the most important explanatory variable for the arsenide removal. In addition, the arsenide removal process can be depicted with pseudo-second-order kinetics model and Langmuir isotherm, respectively. The thermodynamics investigation disclosed that the adsorption process was of a spontaneously endothermic nature. In summary, this study showed that ANN-GA was an efficient and feasible method in determining the optimum conditions for arsenic removal by CoFe2O4/ graphene oxide nanocomposites.

The investor-state dispute settlement (ISDS) system is such a means to an end of further economic development and wider social political goals. With major protective provisions of expropriation against compensation, fair and equitable treatment, national treatment, most-favored-nation treatment, full protection and security and umbrella clause, it helps establish a predictable, transparent, and enforceable legal regime to protect foreign investors’ legitimate expectations and lawful investment. As China intends to attract foreign investments by offering a stable business operation environment, its signing a large number of BITs and FTAs may help reduce political and socio-economic risks, which give states, businesses, and individuals the confidence to work in a coordinated manner. The economic development goal, rule of law strategy, tense US-China relations, ideology of multilateralism and community of common destiny, all add up to China’s inclination to incremental but effective ISDS reform.

The oxygen-rich activated carbon (AC) was facilely developed using petroleum coke as a raw material by KOH activation under the rapid heating rate. The porosity and surface chemistry of ACs prepared under different heating rates were characterized and their adsorption properties for methylene blue (MB) were investigated. The results showed that the AC5 prepared under the heating rate of 5 °C min−1 had the highest surface area compared with the AC10, AC15 or AC20, while the AC20 prepared under the heating rate of 20 °C min−1 consisted of the highest oxygen content and most –OH functional group compares with the other ACs. These indicated that rapid heating rate was against the formation of more developed porosity, however, it was beneficial to producing more oxygen functional groups. As to MB adsorption, AC15 exhibited the maximum adsorption capacity for MB of 884 mg g−1 due to high surface area of 2803 m2 g−1 and high oxygen content of 23.27%. Moreover, despite the fact that AC20 had much lower surface area than the AC5, the AC20 showed higher MB adsorption capacity than the AC5. This was because the AC20 has the highest content of –OH, which was a positive impetus for MB adsorption. Therefore, rapid heating rate was an effective and simple approach to preparing the oxygen-rich ACs for improving the adsorption capacity of MB.

Isotropic pitch-based carbon fiber was successfully prepared from tetrahydrofuran-soluble fraction of coal tar pitch cocarbonization with petrolatum by air-blowing. The effects of reaction temperature and time, amount of petrolatum added on the composition and spinning properties of resultant pitches were investigated. It indicated that petrolatum could effectively improve the softening point, aromaticity, hydrogen content and molecular weight of the resultant pitches by promoting cross-linking and dehydrogenation polymerization reactions at low air-blowing temperature. Moreover, more aliphatic and naphthenic structures had been introduced into resultant pitches as addition of petrolatum and also inhibited the generation of quinoline-insoluble particles. The obtained green fibers were facile to be stabilized and carbonized and the resultant carbon fibers showed fully isotropic and finer, uniform diameter with smooth surface and higher tensile strength of up to 0.92 GPa. It provided a facile chemical modification method for isotropic pitch-based carbon fiber production.

Hay-making is one of the most common way for forage preservation in livestock industry. The quality and production of hay could be affected by various factors. This experiment was conducted to investigate the effect of tedding time and frequency on drying rate and feed value of forage rye (Secale cereale L.) hay. Rye was harvested on heading stage using mower conditioner. Hay was tedded at each set hour(09:00, 13:00 and 17:00) and sampled at each set hour to determine dry matter (DM) content. After two months’ preservation, CP (crude protein), ADF (acid detergent fiber), NDF (neutral detergent fiber), IVDMD (in vitro dry matter digestibility), TDN (total digestible nutrient), RFV (relative feed value), DM loss, visual scores and total fungi count were determined for estimation of hay quality. Tedding was necessary for both speeding up drying rate and improving forage quality. Tedding at 17:00 showed lower NDF content (p<0.05), and also higher RFV value was found compared with tedding at 9:00 and 13:00 (p<0.05). On the other hand, it was observed that more DM losses would be found when tedding later (p<0.05). Tedding in 1~3 times per day were lower in ADF and NDF content (p<0.05), increased CP, TDN and RFV (p<0.05), got less DM loss (p<0.05), and contained less fungi during conservation compared with no tedding (p<0.05). On the other hand, tedding too frequent caused more DM loss (p<0.05). In conclusion, for shorter drying process and higher quality of forage rye hay, tedding at 13:00∼17:00 for 1∼2 times per day was recommended in this study.

A new deformation micromechanism operating in the carbon cathode for aluminum electrolysis termed a ripplocation has been proposed in this paper. The creep deformation of semi-graphitic cathode was measured using a modified Rapoport equipment at 965 °C with cryolite ratio = 4.0. The characteristic of the defect was obtained by analyzing TEM photograph of the carbon cathode with different testing times. The results indicated that basal dislocations, bulk ripplocations, kink bands and delamination cracks appeared in succession in the first two stages of the creep deformation. Ripplocations in the carbon cathode make a layer of carbon atoms to glide relative to each other without damaging the in-plane bonds. Ripplocations could also attract each other and result in kink boundaries. The creep strain of the carbon cathode could be accommodated by kink band and delamination cracks during aluminum electrolysis. A more comprehensive understanding of their micromechanics behaviors is very important and could deeply influence our current knowledge of the deformation mechanism of the carbon cathode for aluminum electrolysis.

However, with the rapid development of information technology, dialects are slipping away. People are gradually ignoring and forgetting local dialects and traditional culture. The loss of dialects will surely lead to the loss of traditional culture. As a language and culture research enthusiast, I hope to make people know more about their own language by studying and comparing more dialects. As the mother tongue, dialect will directly affect the acquisition of the second language when we learn the second language, which not only has a positive role in promoting, but also has a negative role in hindering, which requires us to have a deep understanding of the two languages and a comprehensive comparative study. Suzhou and Hefei belong to the wu-speaking area and the jianghuai guanhua area respectively. Although they are two dialects, they are connected with each other from the geographical position. It can be seen that there must be some common characteristics and differences between the two dialects. Based on a comparative study of the languages of Suzhou and Hefei, the author chooses to present the modern pronunciation of the Chinese ancient pronunciation of rusheng characters in the two places, and analyzes and explains the differences between the initial and final vowels of the dialects respectively, so as to find out the differences between the two dialects.

Japanese pine sawyer, Monochamus alternatus, is the main pest that mediates pine wilt nematode, Bursaphelenchus xylophilus, that causes serious damage to pine forests. In this study, we studied the strategy to control M. alternatus using entomopathogenic fungi. The fungi were collected from soil by an insect-baiting method and two fungal isolates (Metarhizium anisopliae JEF-197 and JEF-279) showed high virulence against M. alternatus. The Metarhizium isolates were evaluated for insecticidal activity against M. alternatus by spray treatment on live pine trees and wintering trees, and the M. anisopliae JEF-197 showed high insecticidal activity. In addition, the interaction of fungi and M. alternatus were analyzed by RNA-seq. This result can contribute to the development of insect control agents using entomopathogenic fungi.

Japanese pine sawyer beetle, Monochamus alternatus Hope (Coleoptera: Cerambycidae) is considered as a serious pest in pine trees. To develop an eco-friendly strategy to manage this forest insect, we collected entomopathogenic fungi from Korean soil and assessed their virulence against the adults of the insect in laboratory conditions. As a result, two isolates with conidial suspension (1.0×107conidia/ml), showed 87% and 90% mortality 12 days after fungal treatment, respectively. We assessed the potential of the fungi-derived destruxin and protease as additives to the fungal isolates, and they showed insecticidal activity via feeding and spraying treatments. Finally, we produced fungal conidia in massive solid cultures and formulated wettable powders, and now studying optimal conditions of oil-based formulation with two isolates. Based on these results, we are evaluating the control efficacy of the fungal agents against M. alternatus in field conditions.

This study proposed an alternative model specification to increase accuracy of conceptualization of the definition of customer engagement and provided theoretical justification for the model in specific social media contexts. The proposed model is a formative construct based on theoretical contexts and observational data. The construct comprises six formative first-order dimensions, namely “influencing behaviors,” “participation in activities,” “customer knowledge sharing,” “feedbacks,” “helping other customers,” and “customer-to-customer interaction.” The study findings offer a basis for identifying indicators of distinct dimensions in the proposed construct. Three models with different conceptualization specifications were estimated and subsequently compared using survey data.

The hard tick, Haemaphysalis longicornis (Ixodida: Ixodidae) is one of the vectors of severe fever with thrombocytopeniasyndrome virus (SFTSV) causing in humans, however little consideration was given to the biological control of the pest.We evaluated three bioassay methods, such as spray, dipping and dropping. As a result, the dipping method was themost efficient way to measure the fungal virulence. Finally, we constructed a Haemaphysalis longicornis pathogenic fungallibrary to further facilitate the resources to be used as potential biological control agents. A conidial suspension of 1×107conidia/ml was exposed to the ticks by dipping. We confirmed that some isolates were highly virulent to the ticks. Thisresults indicated that some fungi could be used to effectively control the Haemaphysalis longicornis.

Hay-making is one of the most common forage preservation practices in livestock operations. The objective of hay-making is to minimize nutrient loss by shortening field drying time. Measuring the impacts of cutting height of forage crop is necessary to optimize hay production balancing yield and quality, in order to obtain substantial biomass increase through harvest of regrowth. This experiment was conducted to investigate the impact of cutting height of rye (Secale cereale L.) on drying rate and hay quality. Heading stage rye was harvested at 8cm or 15cm stubble heights. Hay was daily tedded at 09:00 and sampled at 09:00, 13:00 and 17:00 to determine moisture content (MC). After two month of preservation, CP (crude protein), ADF (acid detergent fiber), NDF (neutral detergent fiber), IVDMD (in vitro dry matter disappearance), TDN (total digestible nutrient), RFV (relative feed value), DM (dry matter) loss, visual scores and total fungi count were determined for estimation of hay quality. Cutting height at 15cm could enhance the drying rate and CP content (p<0.05), but also increases DM loss (p<0.05) compared to cutting at 8cm. Cutting heights did not affect ADF, NDF, IVDMD, TDN and RFV value (p>0.05). Visual scores of rye hays cutting at 8cm and 15cm, ranged from 83 to 85. Cutting at 8cm tended to maintain higher core bale temperature and fungal count than cutting at 15cm during preservation, but there was no significant difference.

With escalating economic growth during the last three decades, flower industry of China, especially cut flower is sharply developed. In this paper a brief review of the cut flower current situation of globe and current status of flower industry of China especially of cut flower in the world is presented. The acreage, yield, potential of cut flower in China along with distribution of major cut flower products and constraint of cut flower also was indicated in this paper was also presented.

The effects of the different clipping time and height on the yield and quality of forage in the meadow grassland were investigated in this experiment. The results showed that the total yield of forage clipped on August 1st and kept the clipped height 5㎝ was high. The contents of crude protein and the phosphorus of forage were the highest on August 1st, with 9.66% and 0.13% respectively. The content of crude protein and the crude fat of forage kept the stubble height of 7㎝ were high, with 8.21% and 4.23% respectively. The crude fiber content of forage (24.85%) kept the clipping height of 3㎝ was high.