Graphene is a suitable transducer for wearable sensors because of its high conductivity, large specific surface area, flexibility, and other unique considerable features. Using a simple, fast galvanic pulse electrodeposition approach, a unique nonenzymatic glucose amperometric electrode was successfully developed based on well-distributed fine Cu nanoparticles anchored on the surface of 3D structure laser-induced graphene. The fabricated electrode allows glucose detection with a sensitivity of 2665 μA/mM/cm2, a response time of less than 5 s, a linear range of 0.03–4.5 mM, and a LOD of 0.023 μM. It also detects glucose selectively in the presence of interfering species such as ascorbic acid and urea. These provide the designed electrode the advantages for glucose sensing in saliva with 97% accuracy and present it among the best saliva-range non-enzymatic glucose sensors reported to date for real-life diagnostic applications.

Flexible supercapacitors (FS) are ideal as power backups for upcoming stretchable electronics due to their high power density and good mechanical compliance. However, lacking technology for FS mass manufacturing is still a significant obstacle. The present study describes a novel method for preparing FS based on reduced graphene oxide (RGO) using the N+ plasma technique, in which N+ reduces graphene oxide on the surface of a cotton/polyester substrate. The effect of aloe vera (AV) as a natural reducing & capping agent and carbon nanotubes (CNT) as nanoconductors on the electrochemical performance of the electrodes is studied. FESEM and XPS were employed to investigate the electrodes' structural and chemical composition of electrodes. The galvanostatic charge–discharge curves of electrodes revealed the enhancement of the electrochemical activity of the as-prepared electrode upon additions of AV and CNT. The areal capacitance of the RGO, RGO/AV, and RGO/ AV/CNT supercapacitors at 5 mV/s was 511, 1244.5, and 1879 mF/cm2, respectively. The RGO electrode showed capacitive retention of 80.9% after 2000 cycles enhanced to 89.7% and 92% for RGO/AV and RGO/AV/CNT electrodes, respectively. The equivalent series resistance of the RGO electrode was 126.28 Ω, decreased to 56.62 and 40.06 Ω for RGO/AV and RGO/ AV/CNT electrodes, respectively.

최근 벚나무에 벚나무깍지벌레에 의한 피해가 증가하여 친환경적인 방제제로서 곤충병원성 곰팡이인 Beauveria bassiana ARP14를 검증하였다. 경북 안동시 안동대학교 캠퍼스 내 벚나무에서 벚나무깍지벌레의 감염율을 조사하고, 벚나무의 연령을 추정하여 상관관계를 분석하였다. 곤충병원성 곰팡이의 살충력을 확인하 기 위해 약충의 이동성이 가장 활발한 4월 말부터 5월 중순까지 벚나무깍지벌레에 감염된 가지를 채집하여 23°C 의 항온기에 보관하면서 두 가지 곤충병원성 곰팡이(ARP14, AAD16)를 살포하여 살충제(스피로테트라맛 액상 수화제) 처리구와 살충률을 비교하였다. 그 결과 대조구(물처리)보다 곤충병원성 곰팡이를 살포한 가지에서 약충의 개체 수가 더 감소하였으나, 살충제를 처리한 가지에서 보다는 약충의 수가 많았다. 따라서 가로수로 많이 식재된 벚나무 해충 방제시 일어날 수 있는 사람에 대한 피해를 최소화할 수 있는 친환경 방제제로서 곤충병 원성 곰팡이를 사용할 수 있을 것이다.

The choice of suitable companion plants is crucial for enhancing pest management strategies in agricultural fields. Riptortus pedestris, an important agricultural pest, has drawn attention for its serious damage on soybean. To identify an ideal companion plant for soybean, we investigated the pest’s behavioral patterns when exposed to corn seedlings in laboratory. Series of choice experiments were conducted for 4th instar nymphs and unmated female adults of R. pedestris when presented with corn and/or soybean pot against soybean or blank pot. In 4th instar nymphs, 56% preferred the treatment of corn pot plus soybean pot over soybean alone pot while 69% of unmated female adults preferred the same combination. These findings provide valuable insights into the behavior of this insect pest, which could be beneficial for establishing polycultures in agricultural fields.

Tetranychus kanzawai Kishida (Acari: Tetranychidae) is a major pest on strawberry, reducing both the quality and quantity of fruit production. We compared the virulence of an entomopathogenic fungus Beauveria bassiana (Balsamo) Vuillemin ARP14 with a commercial GHA strain against T. kanzawai. In the laboratory, leaf dipping method was conducted while a one-time spray was carried out on selected planting units in strawberry greenhouse with each fungus strain and Triton X-100 as control. Adult T. kanzawai showed lower LT50 when treated with ARP14 strain compared to GHA in the laboratory. The densities of both adult and nymph mites in the greenhouse were significantly reduced in the treatment of two fungus strains compared to the control. The mycosis rate of T. kanzawai in greenhouse was 97.9% at 14 days when treated with ARP14 strain while it was 85.5% when treated with GHA strain. The results suggest that B. bassiana ARP14 can be an effective mycoinsecticide against T. kanzawai.

The ladybird beetles have been used as biological control agents against several pest species. The aim of this study is to evaluate the compatibility between ladybird beetles and an entomopathogenic fungus Beauveria bassiana (Balsamo) Vuillemin AAD16. The virulence of AAD16 strain was compared with that of commercial GHA strain on three developmental stages of two coccinellids; Harmonia axyridis Pallas and Chilocorus stigma Say. The topical application method was used for both adult and larval stage while dipping method was used for egg stage. The LT50 and mycosis rate for all life stages of two ladybird beetles tested were not significant between AAD16 and GHA strain. In larval stage, the mycosis rates of H. axyridis and C. stigma were 36 and 40% and 63 and 60% in AAD16 and GHA strain. In adult stage, the mycosis rates of H. axyridis (male and female) and C. stigma (unsexed) were 20, 23, and 23% and 26, 30, and 30% in AAD16 and GHA strain, respectively. Therefore, the two predatory coccinellids could be compatible with these two fungus strains due to their relatively lower mycosis rate.

Graphene oxide/Iron III oxide (GO: Fe2O3) nanocomposites (NCs) have been topical in recent times owing to the enhanced properties they exhibit. GO acting as a graphene derivative has demonstrated superior features as obtainable in a graphene sheet. Furthermore, the attachment of oxygen functional groups at its basal and edge planes of graphene has allowed for easy metal/oxide functionalization for improved properties harvesting. Fe2O3 nanoparticles (NPs) on the other hand have polymorphic property enabling the degeneracy of Fe2O3 in different phases, thereby resulting in different physical and crystalline properties when used to functionalize GO. The properties of GO: Fe2O3 have been applied to supercapacitor energy harvesting, Li-ion batteries, and biomedicine. The enhanced properties are attributed to the adsorption and electronic structure properties of Fe atoms. In this review, the various synthesis used in the preparation of reduced/graphene oxide: Fe2O3 is discussed. As indicated in the considered literature, the XPS analysis suggests electronic bond interactions between C–C, C–O, C–Fe and Fe–C. The available report on UPS measurements further suggests the formation of mixed states emanating from  and  bonds. The discussed reports further suggest that the various applications based on the harvesting of electronic, electrical, and magnetic properties are due to the ionic and exchange interactions between the different orbital states of carbon, oxygen and iron. The challenges and future prospects of the synthesis and application of GO/Fe2O3 are examined. Graphical abstract showing the process of exfoliation, reduction and functionalization of graphite to produce reduced graphene oxide (rGO).

The ultrasonic method is an alternative to the conventional route to produce structured carbon materials, offering the advantages of synthesis in a short period of time under room temperature. The main objective of this work is to synthesize a sulfonated mesoporous carbon catalyst from a phenolic resin composed of phloroglucinol and formaldehyde. The synthesis was performed by the soft-template method in an ultrasonic processor and the product was subsequently carbonized and sulfonated for application in the esterification model reaction. Functionalization with sulfuric acid of MCS5-6 h sample brought about a decrease in porosity but simultaneously resulted in the generation of functional groups of an acidic nature. The MCS5-6 h catalyst with a sulfonic density of 1.6 mmol g− 1, surface area of 402 m2 g− 1 and pore diameter of 10.6 nm maintained in mesoporous even after acid treatment. MCS5-6 h showed excellent activity in the esterification reaction with 95% oleic acid conversion. The recyclability of MCS5-6 h was satisfactory during five reaction cycles. The present work addressed a promising alternative for the synthesis of carbon catalysts using ultrasound irradiation, thus providing an alternative with a lower cost of time and energy for large-scale production.

Lead sulfide ( PbS ) nanocrystals anchored on nitrogen-doped multiwalled carbon nanotubes ( CNx ) have been synthesized employing an environmentally friendly and inexpensive wet chemistry process. CNx∕PbS composites have been examined by scanning electron microscopy, X-ray diffraction and Raman spectroscopy. Theorical ab initio calculations have been developed to determine the samples structural, morphological and optical properties to explain the experimental evidences. The PbS nanoparticles exhibit of 4 nm to 27 nm particle size with a face-centered cubic crystal structure and are homogeneously distributed along the carbon nanotubes. The nitrogen-doped CNTs acts as binding sites for the PbS clusters as ab initio theoretical study suggests.

In the past decade, there has been phenomenal progress in the field of nanomaterials, especially in the area of carbon nanotubes (CNTs). In this review, we have elucidated a contemporary synopsis of properties, synthesis, functionalization, toxicity, and several potential biomedical applications of CNTs. Researchers have reported remarkable mechanical, electronic, and physical properties of CNTs which makes their applications so versatile. Functionalization of CNTs has been valuable in modifying their properties, expanding their applications, and reducing their toxicity. In recent years, the use of CNTs in biomedical applications has grown exponentially as they are utilized in the field of drug delivery, tissue engineering, biosensors, bioimaging, and cancer treatment. CNTs can increase the lifespan of drugs in humans and facilitate their delivery directly to the targeted cells; they are also highly efficient biocompatible biosensors and bioimaging agents. CNTs have also shown great results in detecting the SARS COVID-19 virus and in the field of cancer treatment and tissue engineering which is substantially required looking at the present conditions. The concerns about CNTs include cytotoxicity faced in in vivo biomedical applications and its high manufacturing cost are discussed in the review.

We investigated the electronic and mechanical properties of single-walled carbon nanotubes (SWCNTs) with different tube diameters using density functional theory (DFT) and molecular dynamics (MD) simulation, respectively. The carbon nanotubes’ electronic properties were derived from the index number ( n 1 , n 2 ), lattice vectors, and the rolled graphene sheet orientation. For (6,1) SWCNT, ( n 1-n 2)/3 is non-integer, so the expected characteristic is semiconducting. We have considered (6,1) Chiral SWCNT with different diameters ‘d’ (4.68 Å, 4.90 Å, 5.14 Å, 5.32 Å, 5.53 Å) corresponds to respective bond lengths ‘  ’ (1.32 Å, 1.38 Å, 1.45 Å, 1.50 Å and 1.56 Å) and then analyze the electronic properties from the Linear Combination of Atomic Orbitals (LCAO) based on DFT. We have used both the DFT-1/2 and GGA exchange energy correlation approximations for our calculation and compared the results. In both cases, the energy bandgap is decreasing order with the increase in bond lengths. The lowest value of formation energy was obtained at the bond length  = 1.45 Å ( d = 5.14 Å). For the mechanical properties, we have calculated Young’s modulus using molecular dynamics (MD) simulations. From our calculation, we have found that the (6,1) SWCNT with bond length 1.45 Å ( d = 5.14 Å) has Young’s modulus value of 1.553 TPa.

This paper presents a Raman spectroscopy study of the influence of methane flow on the micro-tribological behavior of diamond-like carbon coatings deposited with an industrial plasma-enhanced chemical vapor deposition system. Results have shown a direct relationship between the methane flow and thickness of the coatings. The analysis of the Raman spectra and deposition parameters allowed establishing the influence of H content with the methane flow, the disorder level and estimation of the sp3 fraction on the carbon coatings. The micro-tribology tests showed a strong dependence of the wear resistance and hardness with Raman parameters. The coating deposited at 72-sccm methane flow presented a thickness of 1.7 μm and a sp3 fraction of 0.33. This sp3 fraction gave rise to a hardness of 24 GPa and an excellent wear resistance of 3.3 × 10–6 mm3 N−1 mm−1 for this DLC coating. Wear tests showed a swelling in the wear profiles on this coating, which was associated with the occurrence of a re-hybridization process.

The nutritional value and yield of mushrooms depend on the substrate on which it is grown. This study sought to biofortify Pleurotus floridanus with calcium supplements and assess its effect on the yield and calcium levels. The experiment was set up in a 2 × 5 factorial and replicated thrice in a completely randomized design. Two calcium supplements, OML and OMW, were added to two growth media. The examination of total dry weight yield showed that calcium supplements OML and OMW in the sawdust medium containing wheatbran in the ratio 1:10 had a mean value of 4.37 g, which was significantly higher (P < 0.05) than that in the control (1.29 g). However, in the sawdust-only medium, there was no significant difference (p > 0.05) in the application of treatments. No significant difference (p > 0.05) was observed between the calcium types in both growth media. The mineral analysis showed that calcium levels were increased in harvested mushrooms with the addition of calcium OML and OMW to the growth media.