Tropilaelaps mercedesae Anderson and Morgan, 2007 (Acari: Laelapidae) is a serious ectoparasite of the brood of several honey bee species. Among the four recognized species of Tropilaelaps, Korean population was renamed as T. mercedesae from T. clareae on the basis of morphological evidences and genetic data. In this study, we report the complete mitochondrial genome (mitogenome) sequence of T. mercedesae. The 15,119-bp long mitogenome has an identical gene arrangement to that of Chinese sample reported previously. Comparison of two geographic samples showed COII, ND5, ND4, ND6, CytB, and ND1 to have higher number of variable sites than COI, which is often used for population-level study, suggesting these genes to have potential usefulness for population genetic study. The mitogenome sequence of T. mercedesae from Korea could be useful for species identification for geographic samples, trace of the origin of local populations, and illustration of evolutionary distinction among Tropilaelaps species either using part of or whole genome.

모기는 감염병을 매개하는 종으로 전염병 확산 억제를 위해서는 개체수의 감시와 정확한 예측이 필요하다. 본 연구에서는 모기 개체수 및 기상 및 현장 자료를 활용해 모기 개체수 머신러닝 모델을 개발하였다. 모기 개체수는 디지털 모기 측정기(Digital Mosquito Monitoring System, DMS)의 2015 년~2022년의 5월~10월의 자료를 활용하였다. 기상 자료는 기온, 강수량, 풍속, 습도를 사용하였으며, 현장 조사 자료는 현장을 명목척도와 서열척도로 나누어 기록하여, 명목 척도의 경우 원핫 인코딩으 로 변환해 수치화하여 사용하였다. 분석에 사용된 머신러닝 모델은 Artificial Neural Network, Random Forest, Gradient Boosting Machine, Support Vector Machine이며 성능지표로 R2, RMSE를 사용하였다. 연구 결과, Gradient Boosting 모델이 R2 0.4, RMSE 22.45로 가장 좋은 성능을 나타냈다. 현장 조사 자료 를 분석에 활용하였을 때 R2는 증가하였고, RMSE는 감소하였다. 본 연구 결과 모기 개체수에 현장 조사 자료가 예측 정확도를 향상시킬 수 있음을 확인하였다.

Kori unit 1, the first PWR (Pressurized Water Reactor) in Korea, was permanent shut down in 2017. In Korea, according to the Nuclear Safety Act, the FDP (Final Decommissioning Plan) must be submitted within 5 years of permanent shutdown. According to NSSC Notice, the types, volumes, and radioactivity of solid radioactive wastes should be included in FDP chapter 9, Radioactive Waste Management, Therefore, in this study, the types depending on generation characteristics and radiological characterization methods and process of solid radioactive waste were analyzed. Solid radioactive waste depending on the characteristics of the generation was classified into reactor vessel and reactor vessel internal, large components, small metals, spent nuclear fuel storage racks, insulation, wires, concrete debris, scattering concrete, asbestos, mixed waste, soil, spent resins and filters, and dry active waste. Radiological characterization of solid radioactive waste is performed to determine the characteristics of radioactive contamination, including the type and concentration of radionuclides. It is necessary to ensure the representativeness of the sample for the structures, systems and components to be evaluated and to apply appropriate evaluation methods and procedures according to the structure, material and type of contamination. Therefore, the radiological characterization is divided into concrete and structures, systems and components, and reactor vessel, reactor vessel internal and bioshield concrete. In this study, the types depending on generation characteristics and radiological characterization methods and process of solid radioactive waste were analyzed. The results of this study can be used as a basis for the preparation of the FDP for the Kori unit 1.

To increase antioxidant and antibacterial activities of seasoned soy sauce, five kinds of oriental medicinal plant(Scutellaria baicalensis (P1), Coptis japonica makino (P2), Citriunshius pericarpium (P3), Zizyphi spinosi semen (P4), Crataegus pinnatifida (P5)) and four kinds of medicinal mushrooms(Inonotus obliquus (M1), Hericium erinaceus (M2), Phellinus linteus (M3), Lentinula edodes (M4)) were added to seasoned soy sauce. Soluble solid content, pH, salinity, total polyphenol & flavonoid contents were determined. DPPH & ABTS radical scavenging activities, SOD-like activity, and antibacterial activity were analyzed. Experimental sauces showed decreased pH but significant increases of soluble solid content and salinity. Total polyphenol content was 12.76 μg GAE/g in the control. However, M1 and P1 sauce had significantly higher polyphenol contents at 352.14 and 528.25 μg GAE/g, respectively. Total flavonoids content also showed the same pattern. DPPH free radical scavenging activity was the lowest in the control at 15.75%. It was the highest at 81.80% in M1 and 68.88% in P1. ABTS free radical scavenging activity and SOD-like activity showed the same tendencies. They were higher in the experimental groups than in the control. As for the antibacterial activity analyzed by the paper-disc method, the activity increased the most in P1 and P2. In particular, P2 had the strongest antibacterial activity. Its activity against different microorganisms was in the order of Staphylococcus aureus > Bacillus cereus > Escherichia coli > Salmonella typhimurium. In conclusion, these new sauces show increased antioxidative and antioxidant activities. Therefore, they are expected to be used in various ways as a functional soy sauce.

Functional dyspepsia (FD) is a gastrointestinal disorder with diverse symptoms but no structural or organic manifestations. Benachio-F® (herein named ‘BF-1’) is an over-the-counter liquid digestive formulated with multiple herbal extracts, which has been reported to improve symptoms of FD. A total two experiments were conducted. First, we examined whether BF-1 can modulate the progression of FD through two experimental rat models. A total of three doses (0.3x, 1x, 3x of the human equivalent dose) were used. In the gastric emptying model, both 1x (standard) or 3x (3-fold-concentrated) BF-1 enhanced gastric emptying was compared with that of vehicle-treated animals. In a feeding inhibition model induced by acute restraint stress, treatment with 1x or 3x BF-1 led to a similar degree of restoration in food intake that was comparable to that of acotiamide-treated animals. Among the constituents of BF, fennel is known for its choleretic effect. Thus, we next investigated whether a novel BF-based formula (named ‘BF-2’) that contains an increased amount of fennel extract (3.5-fold over BF-1), has greater potency in increasing bile flow. BF-2 showed a superior choleretic effect compared to BF-1. Furthermore, the postprandial concentration of serum secretin was higher in animals pretreated with BF-2 than in those pretreated with BF-1, suggesting that the increased choleretic effect of BF-2 is related to secretin production. Our results demonstrate that BF-1 can modulate the pathophysiological mechanisms of FD by exerting prokinetic and stress-relieving effects, and that BF-2 has a better choleretic effect than BF-1.

Continuous synthesis of high-crystalline carbon nanotubes (CNTs) is achieved by reconfiguring the injection part in the reactor that is used in the floating catalyst chemical vapor deposition (FC-CVD) process. The degree of gas mixing is divided into three cases by adjusting the configuration of the injection part: Case 1: most-delayed gas mixing (reference experiment), Case 2: earlier gas mixing than Case 1, Case 3: earliest gas mixing. The optimal synthesis condition is obtained using design of experiment (DOE) in the design of Case 1, and then is applied to the other cases to compare the synthesis results. In all cases, the experiments are performed by varying the timing of gas mixing while keeping the synthesis conditions constant. Production rate (Case 1: 0.63 mg/min, Case 2: 0.68 mg/min, Case 3: 1.29 mg/min) and carbon content (Case 1: 39.6 wt%, Case 2: 57.1 wt%, Case 3: 71.6 wt%) increase as the gas-mixing level increases. The amount of by-products decreases stepwise as the gas-mixing level increases. The IG/ID ratio increases by a factor of 7 from 10.3 (Case 1) to 71.7 (Case 3) as the gas-mixing level increases; a high ratio indicates high-crystalline CNTs. The radial breathing mode (RBM) peak of Raman spectrograph is the narrowest and sharpest in Case 3; this result suggests that the diameter of the synthesized CNTs is the most uniform in Case 3. This study demonstrates the importance of configuration of the injection part of the reactor for CNT synthesis using FC-CVD.

The purpose of this study was to develop synbiotic materials and to apply them to the puffed grain products using electrostatic spraying technology. Lactic acid bacteria were isolated from Kimchi and selected through tests of acid resistance, bile salt resistance and γ-aminobutyric acid (GABA) content. The isolated Lactobacillus brevis CFM21 produced highest GABA production up to a concentration of 926.42 μg/mL when grown in MRS broth containing 0.8% MSG. The possibility of coated grains as a prebiotic material was evaluated Confocal laser scanning micro scopy (CLSM). Rice bran extract containing 2% dextrose, 2% soytone, 0.2% potassium chloride, 0.6% MSG was produced 524.77 μg/mL of GABA. Citrus sinensis oil showed the highest antibacterial activity against Clostridium perfringens Electrostatic spray showed much higher effectiveness than conventional spray in coating the puffed grain product through CLSM. Applying Rice bran culture and Citrus sinensis oil to puffed grain product using electrostatic spray could contribute to promote intestinal health of consumers.

Fly ash consists of various metal oxides which can remove SO2 gas by the catalyst effect. When fly ash is added in the preparation process of pitch-based activated carbon, the pitch particles aggregate and fly ash is embedded in the activated carbon. To increase SO2 gas removal performance, activated carbon was prepared by surface-treated fly ash and petroleum-based pitch. Carboxyl groups were introduced into the fly ash by malic acid treatment. The introduced carboxyl groups acted as an activation agent to create micropore around the fly ash, and created micropores were exposed to the fly ash outside of the activated carbon. The exposed fly ash increased removal amount of SO2 gas by a catalytic effect of the metal oxides. The SO2 gas removal performance improved by 34% because of the catalyst effect of the exposed fly ash and improvement in the micropore structure in the activated carbon.