Metarhizium은 대표적인 곤충병원성 진균 중 하나로, 종에 따라 매우 다양한 곤충에게 병원성을 일으키는 폭 넓은 기주범위를 형성한다. 이들이 주로 생성하는 것으로 알려진 destruxins (DTXs)이라는 2차 대사산물은 살충 활성 뿐만 아니라 항바이러스, 항증식, 항암 등 다양한 분야에서 효능이 연구되고 있어, 해당 물질에 대한 관심이 집중되고 있다. 살충 물질로서의 DTXs는 여러 곤충에 있어 병원성을 나타내는 것이 확인되었으나, 해충 으로서 전 세계적으로 심각한 경제적 피해를 일으킴과 동시에, 화학 살충제 저항성 문제가 야기되고 있는 목화진 딧물에 대해서는 아직 DTXs의 역할이 연구되지 않고 있는 실정이다. 본 연구에서는 목화진딧물에 대해 곤충병원 성 진균 Metarhizium spp.의 병원성 발현에 DTXs가 미치는 역할을 간접적으로 확인하기 위해, qPCR을 활용하여 진균 처리 후 목화진딧물 사망 시간과 관련하여 충체 내 DTX 합성효소의 발현을 비교 분석하였다.

Mycoviruses are a group of viruses that infect filamentous fungi. While most hosts infected with mycoviruses do not show any symptoms. In some cases, mycoviruses induce various phenotypic changes include alterations in morphology, drug resistance, pathogenicity, virulence, sporulation, and growth. Entomopathogenic fungi are one of the integrated pest management agents as an alternative to conventional insecticides. Mycoviruses have the potential as supportive agents, enhancing the efficiency of the insecticidal activity of the fungi. Studies about mycoviruses themselves and their interaction with their hosts, especially entomopathogenic fungi, are needed to realize their full potential. In this work, the sequence of the dsRNA element isolated from the entomopathogenic fungus Metarhizium pinghaense 4-2 strain was determined. Through this study, we report the sequence of a dsRNA virus isolated from the Metarhizium pinghaense for the first time. In further studies, the ORF of the mycovirus that induces a phenotype change in the host will be researched.

마이코바이러스는 곰팡이를 감염시키는 바이러스로 자낭균류, 담자균류 및 난균류에서 주로 발견되며 일부 의 경우 곰팡이의 표현형에 영향을 끼치는 것으로 알려져 있다. 이번 연구에서는 대한민국 토양 샘플에서 분리된 65개의 자낭균류 및 접합균류 균주의 전체 핵산을 추출하고, 전기영동을 통해 바이러스 특이적 밴드를 스크리닝 하였다. 스크리닝 결과 65개의 균주 중에서 Tolypocladium spp. 균주 2개와 Marquandomyces marquandii 균주 1개에서 바이러스 특이적 밴드를 발견하였다. 그 후, Cellulose Chromatography를 이용하여 double-stranded RNA 를 분리하고 DNase I 및 S1 Nuclease 처리를 통해 DNA와 single-stranded RNA를 제거하여, Tolypocladium sp. 균주 1개와 Marquandomyces marquandii 균주에서 발견한 특이적 밴드가 dsRNA임을 확인하였다. 추후 virus-free isogenic line을 확보하여 virus 유무에 따른 표현형 변화를 확인하고, 마이코바이러스와 곰팡이 간의 상호작용에 관해 연구할 계획이다.

Aphids are well-known insect pests that, due to their feeding habits, affect various crops' productivity and marketability. Additionally, they cause significant damage worldwide as vectors of viruses. Chemical pesticides are widely used to control these agricultural pests. However, due to resistance to various chemical pesticides, pest control is becoming difficult in agricultural environments. Entomopathogenic fungi such as the genus Metarhizium and Beauveria are being extensively researched as alternatives to these chemical pesticides. In this study, the mycological properties of isolated from soil Metarhizium pemphigi IPBL-H and the insecticidal activity of this strain against Myzus persicae and Aphis gossypii were evaluated for potential of development as a biopesticide.

In the nuclear fuel cycle (NFC) facilities, the failure of Heating Ventilation and Air Conditioning (HVAC) system starts with minor component failures and can escalate to affecting the entire system, ultimately resulting in radiological consequences to workers. In the field of air-conditioning and refrigerating engineering, the fault detection and diagnosis (FDD) of HVAC systems have been studied since faults occurring in improper routine operations and poor preventive maintenance of HVAC systems result in excessive energy consumption. This paper aims to provide a systematic review of existing FDD methods for HVAC systems therefore explore its potential application in nuclear field. For this goal, typical faults and FDD methods are investigated. The commonly occurring faults of HVAC are identified through various literature including publications from International Energy Agency (IEA) and American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). However, most literature does not explicitly addresses anomalies related to pressure, even though in nuclear facilities, abnormal pressure condition need to be carefully managed, particularly for maintaining radiological contamination differently within each zone. To build simulation model for FDD, the whole-building energy system modeling is needed because HVAC systems are major contributors to the whole building’s energy and thermal comfort, keeping the desired environment for occupants and other purposes. The whole-building energy modeling can be grouped into three categories: physics-based modeling (i.e., white-box models), hybrid modeling (i.e., grey-box models), and data-driven modeling (i.e., black-box models). To create a white-box FDD model, specialized tools such as EnergyPlus for modeling can be used. The EnergyPlus is open source program developed by US-DOE, and features heat balance calculation, enabling the dynamic simulation in transient state by heat balance calculation. The physics based modeling has the advantage of explaining clear cause-and-effect relationships between inputs and outputs based on heat and mass transfer equations, while creating accurate models requires time and effort. Creating a black-box FDD model requires a sufficient quantity and diverse types of operational data for machine learning. Since operation data for HVAC systems in existing nuclear cycle facilities are not fully available, so efforts to establish a monitoring system enabling the collection, storage, and management of sensor data indicating the status of HVAC systems and buildings should be prioritized. Once operational data are available, well-known machine learning methods such as linear regression, support vector machines, random forests, artificial neural networks, and recurrent neural networks (RNNs) can be used to classify and diagnose failures. The challenge with black-box models is the lack of access to failure data from operating facilities. To address this, one can consider developing black-box models using reference failure data provided by IEA or ASHRAE. Given the unavailability of operation data from the operating NFC facilities, there is a need for a short to medium-term plan for the development of a physics-based FDD model. Additionally, the development of a monitoring system to gather useful operation data is essential, which could serve both as a means to validate the physics-based model and as a potential foundation for building data-driven model in the long term.

Cryptotympana atrata belongs to the family Cicadidae, has long been recognized as a damaging plant-sucking pest, and is distributed in East Asian countries. In addition, their cries cause direct harm to us through noise pollution and also reported twig damage in the forest environments. In this study, we isolated strains of the entomopathogenic fungus Metarhizium that occurred from C. atrata collected this year. Here, we provide the morphological character and molecular phylogenetic relationship of this species. This is the first record of the entomopathogenic fungus Metarhizium viridulum isolated from C. atrata in Korea and provides a candidate strain with potential use for biological agents.

With the infusion of advanced technology, interactions between customers and firms’ representatives take place in brick-and-mortar stores, 2D online sites, and even 3D metaverse environments. In the metaverse, a firm’s sales avatars interact with other users while representing the firm, recommend, and sell virtual items. Previous literature about the effectiveness of sales representatives agrees that a firm representatives’ smiling faces engender customer satisfaction and better interactions. However, it is unclear whether smiling faces of sales avatars will work the same way in the metaverse as they do in the real world. The current research examines whether a firm’s sales avatars with sad facial expression (vs. those with smiling facial expression) stimulate higher user intentions to interact with firm representative avatars, to purchase virtual items from the representative avatars, and to spread positive WOM about their experience in the metaverse. Moreover, focusing on subcultural appeal, we investigate why this unconventional phenomenon happens in the metaverse unlike in real world. We conducted two experiments to manipulate a firm representative avatar’s facial expression (smiling vs. sad) in the metaverse. We newly designed a metaverse place, and participants who put on a virtual reality headset are exposed to either a hat (Experiment 1) or shoes (Experiment 2) store where they can purchase a virtual hat or shoes. Experiments 1 and 2 basically tested the same things repeatedly. However, to improve internal validity and generalizability, Experiment 2 used human-like sales avatars instead of cartoon character-like sales avatars in Experiment 1, changed virtual stores from a hat store to shoes store, and finally controlled for various extraneous variables such as attractiveness, warmth, and competence of sales avatars, and user’s previous experience about metaverse. Sales representatives with a smile are believed to contribute to beneficial consumers’ attitudes and behaviors in offline stores. However, our experiments demonstrate that this well-received belief does not necessarily apply in the metaverse, where subcultural appeal plays a more critical role. In the metaverse, users evaluate sales avatars with sad facial expression (vs. with smiling facial expression) as more unique and cool (i.e., higher subcultural appeal), leading to their higher intention to interact with the sad sales avatar, to purchase a virtual item, and to spread positive WOM about their experiences. Our results imply that previous findings supported in the offline or 2D online sites may not work the same way in the 3D metaverse.

The Korea Laboratory Accreditation Scheme (KOLAS) is the national accreditation body responsible for providing accreditation services to testing and calibration laboratories. The primary objective of KOLAS is to promote the quality and reliability of laboratory testing by providing nationally and internationally recognized accreditation services. Laboratories accredited by KOLAS are required to meet rigorous international standards set by the International Organization for Standardization (ISO) and are subject to regular assessments to ensure ongoing compliance with the standards. KOLAS accreditation is highly regarded both domestically and internationally, and is recognized for providing high-quality and reliable testing services. The nuclear analysis laboratory at KINAC has been working to establish a quality management system to ensure the external reliability of analytical results and to secure its position as an authorized testing agency. To achieve this, a detailed manual and procedure for nuclear material analysis were developed to conform to the international standards of ISO/IEC 17025. This study presents the preparation process for establishing the management system, focusing on meeting technical and quality requirements for the implementation of the ISO/IEC 17025 standard in the KINAC nuclear analysis laboratory, specifically in the field of chemical testing (dosimetry, radioactive, and neutron measurement subcategories). The preparation process involved two tracks. The first track focused on satisfying technical requirements, with Thermal Ionization Mass Spectrometer (TIMS) and Inductively Coupled Plasma-Mass Spectrometer (ICP-MS) selected as the major equipment for analysis. Analytical methods for determining isotope ratios and concentrations of nuclear materials were determined, and technical qualification was ensured through participation in proficiency test programs, inter-experimenter comparison tests, and uncertainty reports. The second track focused on developing the quality system, including quality manuals, procedures, and guidelines based on the requirements of the ISO/IEC 17025 standard. Various implementation documents were produced during the six-month pilot period, in accordance with the three levels of documents required by the standard. Implementation of ISO/IEC 17025 is expected to have a systematic quality management process for the analysis lab’s operations and to increase confidence in KINAC’s nuclear analysis.

The domestic representative nuclear fuel cycle facilities are post-irradiation examination facility (PIEF) and Irradiated Examination Facility (IMEF) at KAERI. They have regularly operated since 1991 and 1993, respectively. Due to the long period of use, the facilities are ageing, and maintenance costs are increasing every year. The maintenance methods have mainly been breakdown maintenance (BM) and partially preventive maintenance (PM). They involve replacing components that have problems through periodic inspections by on-site inspectors. However, these methods are not only uncertain in terms of replacement cycles due to worker’s deviation on the inspection results, but also make it difficult to respond accidents developed through failures on the critical equipment that confines radioactive material. Therefore, an advanced operation and maintenance studied in 2022 through all of nuclear facilities operated at KAERI. Advancement strategy in four categories (safety, sustainability, performance, innovativeness) was analyzed and their priorities according to a facility environment were determined so a roadmap for advanced operation and maintenance could be developed. The safety and sustainability are higher importance than the performance and innovativeness because facilities at KAERI has an emphasis on research and development rather than industrial production. Thus, strategy for advancement has focused even more on strengthening the safety and sustainability. To enhance safety, it has been identified that immediate improvement of aged structures, systems, and components (SSCs) through large-scale replacement is necessary, while consideration of implementing an ageing management program (AMP) in the medium to long term is also required. Facility sustainability requires strengthening operation expertise through training, education, and cultivation of specialized personnel for each system, and addressing outstanding regulatory issues such as approval of radiation environment report on the nuclear fuel processing facilities and improvement work according to fire hazard analysis. One of the safety enhancement methods, AMP, is a new maintenance approach that has not been previously applied, so it had to be thoroughly examined. In this study, an analysis was conducted on the procedure and method for introducing an AMP. An AMP for nuclear fuel cycle facilities was developed by analyzing the AMP applied to the BR2 research reactor in Belgium and modifying it for application to nuclear fuel cycle facilities. The ageing management for BR2 has the objective to maintain safety, availability and cost efficiency and three-step process. The first step is the classification of SSCs into four classes to apply graded approach. Secondly, ageing risk is assessed to identify critical failure modes, their frequency and precursors. Final step involves defining measures to reduce the ageing risk to an acceptable level in order to integrate the physical and economic aspects of ageing into a strategy for inspection, repair, and replacement. Similar approach was applied to the nuclear fuel cycle facility. Firstly, the SSCs of nuclear fuel cycle facilities have been classified according to their safety and quality classifications, as well as whether they are part of the confinement boundary. The SSCs involved in the confinement boundary were given more weight in the classification process, even if they are not classified as safety-class. A risk index for ageing was introduced to determine which prevention and mitigation measure should be chosen. By multiplying the health index and the impact index, the ageing risk matrix provides a numerical score that represents guidance on the prevention and mitigation of ageing effect. The health index is determined by combining the likelihood of failure and engineering evaluation of the current condition of SSCs, whereas the impact index is calculated by taking into account the severity of consequences and the duration of downtime resulting from a failure. This ageing management has to be thoroughly reviewed and modified to suit each facility before being applied to nuclear fuel cycle facilities.

The emergence of environmental and social issues has led to global discussions for the realization of sustainable development. The purpose of this study is to propose a method of sustainable fashion design using waste Hanbok, focusing on men's Hanbok with cultural values. The study utilizes literature research and fashion design development. From the literature study, reform was judged to be a higher concept encompassing reduction, recycling, and upcycling. Reduction is a design method through removal, and recycling design transforms from its original form into a completely different product. Upcycling design focuses on improvement and change in functionality. Accordingly, nine redesigns using men’s Hanbok were developed from which three were produced. Consequently, the reduction design demonstrated a small range of variation without changing the item, and cultural sustainability was confirmed through the design that removed the components and recombined the Hanbok. Second, recycling redesign can be reconstituted into a different item. Third, upcycling enables various designs through module assembly, which prolongs the lifespan of the product and confirms its value as a raw material for waste Hanbok. This study is meaningful in realizing sustainable fashion and suggesting practical measures for the sustainability of Korean traditional culture and creative fashion design planning.

In this study, thirty-eight lactic acid bacteria (LAB) strains were isolated from Kimchi (Korean traditional fermented food) and screened for probiotic characterization in a series of in vitro tests, including resistance to low pH, tolerance to bile salts, hydrophobicity, antibiotic resistance and antioxidant activity. Firstly, twenty-two strains displayed survival in acid and bile passage conditions. Secondly, the strains KCCP 11349 and KCCP 11356 were observed to have high cell surface hydrophobicity with 63.9 and 98.8 %, respectively. Functionality of these potential probiotic isolates was supported by their antioxidant activity. Altogether, the strain KCCP 11349 showed characteristics similar to or even better than reference strain Lactobacillus rhamnosus GG. Finally, 16S rRNA gene sequencing was conducted to identify potential probiotic strains and KCCP 11349 was identified as Lactobacillus plantarum subsp. plantarum.