Decontamination is one of the important processes for dismantling nuclear power plants. The purpose of decontamination is to reduce the radiation levels of contaminated nuclear facilities, ensuring the safety of workers involved in decommissioning and minimizing the amount of radioactive waste. In this study, we investigate the reaction mechanisms and their thermodynamic energies of the HyBRID (Hydrazine-Based Reductive participated metal Ion Decontamination) process for decontamination of the primary coolant system of a nuclear power plant. We computed the thermodynamic properties of HyBRID dissolution mechanisms in which corrosion metal oxides accumulated in the primary coolant systems along with radionuclides are dissolved by HyBRID decontamination agents (H2SO4/N2H4/CuSO4). The HyBRID reaction mechanism has been studied using a commercial database (HSC Chemistry®), but Cu ions have been used instead of Cu-hydrazine complexes when calculating reactions due to the absence of thermodynamic properties for Cu-hydrazine complexes. To address this limitation, we supplemented the quantum calculations with Cu-hydrazine complexes using the density functional calculations. It is intended to simulate a more practical reactions by calculating the reactions considering Cu-hydrazine complexes, and to improve understanding of the HyBRID dissolution reactions by qualitatively and quantitatively comparing the reactions without considering the complex formation.

In this study, magnetite (Fe3O4) nanoparticles were electrochemically synthesized in an aqueous electrolyte at a given potential of -1.3 V for 180 s. Scanning electron microscopy revealed that dendrite-like Fe3O4 nanoparticles with a mean size of < 80 nm were electrodeposited on a glassy carbon electrode (GCE). The Fe3O4/GCE was utilized for sensing chloramphenicol (CAP) by cyclic voltammetry and square wave voltammetry. A reduction peak of CAP at the Fe3O4/GCE was observed at 0.62 V, whereas the uncoated GCE exhibited a very small response compared to that of the Fe3O4/GCE. The electrocatalytic ability of Fe3O4 was mainly attributed to the formation of Fe(VI) during the anodic scan, and its reduction to Fe(III) on the cathodic scan facilitated the sensing of CAP. The effects of pH and scan rate were measured to determine the optimum conditions at which the Fe3O4/GCE exhibited the highest sensitivity with a lower detection limit. The reduction current for CAP was proportional to its concentration under optimized conditions in a range of 0.09-47 μM with a correlation coefficient of 0.9919 and a limit of detection of 0.09 μM (S/N=3). Moreover, the fabricated sensor exhibited anti-interference ability towards 4-nitrophenol, thiamphenicol, and 4-nitrobenzamide. The developed electrochemical sensor is a cost effective, reliable, and straightforward approach for the electrochemical determination of CAP in real time applications.