최근 국제적인 기후변화로 인해 다양한 산림해충들이 새로운 국가 또는 인접한 지역으로의 분포 확대가 증가 하고 있는 추세이다. 국내외의 대표적인 산림해충 분류군인 나무좀아과와 하늘소과에는 넓은 기주식물 범위를 가지고 있어 산림 생태계에 직간접적으로 피해를 야기하는 종들이 다수 포함되어 있다. 본 연구에서는 2023년 5월부터 10월까지 남북 접경지(강원 철원군, 양구군, 고성군) 내 혼합림에서 린드그렌 퍼넬 트랩(Lindgren funnel trap)을 활용하여 4가지 유인제(Ipsenol, Ipsedienol, Alpha-pinene, Monochamol) 조건별 나무좀류와 하늘소류의 유인효과와 시기별 발생 양상을 조사하였다. 연구 결과, 나무좀아과는 총 26속 45종 7,743개체, 하늘소과는 총 35속 42종 649개체를 확인하였다. 본 발표에서는 남북 접경지에서의 시기별, 지역별 나무좀류와 하늘소류 발생 양상과 4가지 유인제별 효과에 대한 결과를 보고한다.

Five insecticides (Acrinathrin, Dinotefuran, Emamectin benzoate, Chlorfenapyr and fluxametamide) approved for tomato cultivation were evaluated in Frankliniella occidentalis populations collected from Chungcheong province (Cheongyang, Chungju and Gongju). Leaf dip bioassay was used to evaluate resistance levels (LC50). Bioassays on Acrinathrin demonstrated higher LC50 concentration in evaluated populations. In particular, the Chungju population was 745.61 times the recommended concentration of the insecticide. Other remarkable resistance levels were recorded for the Dinotefuran with 435.06 times and 196.29 times the recommended concentrations for the populations from Chungju and Gongju, respectively. Bioassays for Emamectin benzoate, Chlorfenapyr and Fluxametamide showed low resistance to insecticides in the evaluated populations.

Yellow flower thrips (WFT), Frankliniella occidentalis is mainly controlled using chemical control methods. But the continuous use of chemical pesticides in greenhouse may contribute to development of insecticide resistance. Therefore, in this study, we evaluated the insecticidal activity of eleven insecticides against the WFT occurring in greenhouse pepper cultivation in the Gyeonggi province. The results showed no resistance in treatments with emamectin benzoate, fluxametamide, and flometoquin while high levels of resistance were recorded in treatments with acrinathrin, acetamiprid, and dinotefuran. The Anseong and Yeoju population was more resistant against spinetoram and chlorfluazuron, respectively, than populations from other regions.

The Korea Forest Service has designated seven alpine tree species—Abies koreana, A. nephrolepis, Juniperus chinensis, Picea jezoensis, Pinus pumila, Taxus cuspidata, and Thuja koraiensis—as threatened with extinction in Korea. In 2023, we conducted a study on the seasonal occurrence of insect pests, focusing mainly on two coleopteran taxa (Cerambycidae and Scolytinae) and two hemipteran taxa (Aphrophoridae and Cicadellidae) in subalpine forests dominated by A. koreana, A. nephrolepis, Picea jezoensis, Thuja koraiensis, and Taxus cuspidata. We utilized three types of traps—Malaise trap, Lindgren funnel trap, and window trap—in eight investigation locations in Korea. In this presentation, we present the study results and discuss the effects of insect pests on alpine coniferous trees in Korea.

Background: Somatic cell nuclear transfer (SCNT) is a prominent technology that can preserve superior genetic traits of animals and expand the population in a short time. Hematological characters and endocrine profiles are important elements that demonstrate the stability of the physiological state of cloned animals. To date, several studies regarding cloned camels with superior genes have been conducted. However, detailed hemato-physiological assessments to prove that cloned camels are physiologically normal are limited. In this study, We evaluated the hemato-physiological characteristics of cloned male and female dromedary camels (Camelus dromedaries). Methods: Therefore, we analyzed variations in hematological characteristics and endocrine profiles between cloned and non-cloned age-matched male and female dromedary camels (Camelus dromedaries ). Two groups each of male and female cloned and non-cloned camels were monitored to investigate the differences in hemato-physiological characteristics. Results: All the animals were evaluated by performing complete blood count (CBC), serum chemistry, and endocrinological tests. We found no significant difference between the cloned and non-cloned camels. Furthermore, the blood chemistry and endocrine profiles in male and female camels before maturity were similar. Conclusions: These results suggest that cloned and non-cloned camels have similar hematological characteristics and endocrine parameters.

The optimization of deacetylation process parameters for producing chitosan from isolated chitin shrimp shell waste was investigated using response surface methodology with central composite design (RSM-CCD). Three independent variables viz, NaOH concentration (X1), radiation power (X2), and reaction time (X3) were examined to determine their respective effects on the degree of deacetylation (DD). The DD of chitosan was also calculated using the baseline approach of the Fourier Transform Infrared (FTIR) spectra of the yields. RSM-CCD analysis showed that the optimal chitosan DD value of 96.45 % was obtained at an optimized condition of 63.41 % (w/v) NaOH concentration, 227.28 W radiation power, and 3.34 min deacetylation reaction. The DD was strongly controlled by NaOH concentration, irradiation power, and reaction duration. The coefficients of correlation were 0.257, 0.680, and 0.390, respectively. Because the procedure used microwave radiation absorption, radiation power had a substantial correlation of 0.600~0.800 compared to the two low variables, which were 0.200~0.400. This independently predicted robust quadratic model interaction has been validated for predicting the DD of chitin.

Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

Black phosphorus (BP) is incorporated in the electrochemical detection of uric acid (UA) to form few layers of BP nanosheets (BPNS)-modified glassy carbon electrodes (BPNS/GCE), investigated by means of ultrasound-assisted liquid-phase exfoliation. We find a significant increase in the peak current magnitude and positive potential shift in the electrochemical response of BPNS/GCE, which may be attributed to the larger specific surface area and good charge transfer ability of BPNS. Further, the electrochemical response of BPNS/GCE is evaluated under different conditions to achieve the optimal conditions. UA detection using differential pulse voltammetry (DPV) shows linear response within the range of 1–1000 μM with a detection limit of 0.33 μM. This work reveals new applications of BP nanomaterials in the electrochemical sensing, thereby promoting further advancement in terms of practical applications of two-dimensional nanomaterials.

The objectives of this paper are: (1) to conduct the thermal analyses of the disposal cell using COMSOL Multiphysics; (2) to determine whether the design of the disposal cell satisfies the thermal design requirement; and (3) to evaluate the effect of design modifications on the temperature of the disposal cell. Specifically, the analysis incorporated a heterogeneous model of 236 fuel rod heat sources of spent nuclear fuel (SNF) to improve the reality of the modeling. In the reference case, the design, featuring 8 m between deposition holes and 30 m between deposition tunnels for 40 years of the SNF cooling time, did not meet the design requirement. For the first modified case, the designs with 9 m and 10 m between the deposition holes for the cooling time of 40 years and five spacings for 50 and 60 years were found to meet the requirement. For the second modified case, the designs with 35 m and 40 m between the deposition tunnels for 40 years, 25 m to 40 m for 50 years and five spacings for 60 years also met the requirement. This study contributes to the advancement of the thermal analysis technique of a disposal cell.

Abstract Purpose : This study sought to identify ways to develop the Korean optometrists to meet the diverse and growing social demand for eye health services. Methods : We analyzed the optometrist qualification system, scope of practice, educational qualifications, and types of qualifications in 38 OECD countries based on the World Health Organization (WHO) and the European Union (EU) national occupational classifications of health care professions, data from World Council of Optometry (WCO) member countries, International Orthoptics Association (IOA), and databases of laws and occupational regulations in each country. Results : The occupational classification of the WHO and EU was classified into optometrists and dispensing opticians systems at the same level as medical personnel. However, the occupational classification in Korea is operating in a lower and monotonous structure. More than 78% of OECD countries operated optometrists system, and more than 67% of optometrists performed Category 3 or higher tasks, including prevention and management of abnormal visual function and primary screening and diagnosis of eye health. The educational level of optometrists was found to have a bachelor's degree or higher education than a bachelor's degree in more than 72% of countries. In addition, major overseas countries appeared to be developing into a system of subdivided qualification types such as orthoptist, advanced optometrist, therapeutic optometrist, independent prescribing optometrist, and ophthalmic medical technicians based on the optometrists system, essential clinical experience, and additional specialized education. Conclusion : The Korean optometrists system should introduce the international level as a national qualification, expand the scope of work to Category 3, and develop more specialized and subdivided qualifications. In conclusion, Korean optometrists need to have a standardized curriculum based on international standards, a bachelor's degree or higher, and certification with required clinical experience. Key words : Korean optometrist, Optometrist, Vision care Authors

농촌진흥청 국립원예특작과학원에서는 2021년 분홍색계 소 형 호접란 ‘Arihong’을 육성하였다. 2014년 밝은 분홍색 소형 품종 Phalaenopsis ‘Wedding’와 백색 바탕에 분홍빛을 가지는 소형종 P. ‘[{KT1398-1×(KM-6)-4}×Chiangbeauty-88]-23’ 를 모본과 부본으로 교배하였다. 2018년 실생 120개체 중 잎자세, 화색, 화형, 꽃대수 등 특성이 우수한 ‘14104-1’ 개체를 선발하여 기내 화경배양을 통해 증식하였다. 2018년부터 2021년에까지 1차, 2차특성검정을 통해 품종의 안정성과 균일성을 확인한 후 ‘Arihong’로 명명하였다. 이 품종은 백색(WG155B) 바탕에 중앙 에는 보라빛 분홍색(PVG80B)을 띄며, 진한 자주색(PG78A) 순판 을 가지는 것이 특징이다. 꽃대가 2대씩 발생하고 꽃대 길이는 평균 42.1cm 소형 분화로 적절한 크기를 가지고 있다. 평피기 형태의 꽃은 길이와 폭이 각각 5.1, 5.7cm이며, 분지가 발생하여 1개의 꽃대에 13.0개의 소화가 착생한다. ‘Arihong’의 잎은 수평으로 자라며 길이와 폭이 각각 13.0cm, 4.9cm였다. 또한 초세가 우수하고 생육 속도가 빨라 엽수 확보가 용이한 특성을 보였다.

Myanmar's soil is diverse in terms of climate and topography, including the central dry zone, hilly and upland areas, deltas, and coastal zones. As a result, crops such as rice, sesame, groundnuts, green gram, and maize are grown as major crops. Some soils are difficult to cultivate due to topographic constraints and permanent forests. Soil fertility was classified according to the physical and chemical characteristics. Based on these data, classification, and a soil survey, a soil map was made by the Land Use Division of Myanmar Agriculture Service. Myanmar's soil was classified into 24 soils according to the WRB classification by FAO/UNESCO, and soil maps were produced at the national level and for each of the 14 states and divisions. This study sought to contribute to efficient land use and sustainable agricultural development in Myanmar by understanding Myanmar's agricultural conditions and soil types.

Aligned with the recent shift in fruit consumption trends, there is a growing increase in the cultivation of these fruits. Thus, various types of small fruits, including blueberries, have recently been introduced and cultivated in Korea. According to the data, there has been a notable uptick in blueberry farming, in stark contrast to the decline in cultivation of black raspberries, black chokeberries, and blackcurrants. New varieties of blueberries continue to be introduced and cultivated, aligning with the recent consumption trends and are expected to be consistently cultivated in the future. Despite the decrease in the other berries, health benefits associated with all berries have ignited growing consumer interest, resulting in domestic and international market expansion. In conclusion, this research underscores the importance of identifying plant varieties that are well-suited to Korea's climatic conditions, validating efficient cultivation strategies, and establishing robust distribution networks to foster sustainable development in the berry industry.

PURPOSES : This study aims to conduct a laboratory evaluation on the use of ferronickel slag for manufacturing Hot Mix Asphalat mixtures. METHODS : This research was based on laboratory evaluation only, where conventional aggregate and FNS at a ratio of 7:3 were used in HMA and the volumetric properties, physical and mechanical properties, and long-term performance of FNS in asphalt mixture were evaluated. RESULTS : The overall results showed that FNS can be applied as aggregate in a hot mix asphalt since volumetric, physical and mechanical properties and long-term performance of HMA mixture with ferronickel slags as aggregate met the required standards according to Korean standards for Asphalt Concrete. CONCLUSIONS : The tensile strength ratio results of HMA mixtures with ferronickel aggregate did not meet the required standards, yet the addition of anti-stripping agent and waste glass fibers to the HMA mixture with ferronickel slags improved the tensile strength results to meet the standards. Additionally, compared to the HMA mixture of the same aggregate gradation but with only natural aggregate, HMA mixture with ferronickel slags had almost the same results for the majority of tests conducted.

The legal status of Biodiversity Beyond National Jurisdiction (BBNJ) has been regulated through the High Seas Treaty as a common heritage of humankind. However, there still exist problems related to overlapping areas above the Extended Continental Shelf (ECS). In such areas, a significant continental shelf would fall within national jurisdiction, whereas the water column would be under the regime of the high seas, and BBNJ would be the common heritage of humankind. We argue that, in order to address the overlapping of areas within the superjacent waters in the ECS, a given sui generis status is required, so that the coastal state has a sovereign right to conserve the BBNJ in these areas. This study concludes that the sui generis arrangement should be implemented in the context of an overlapping ECS and its water column. The efforts of the Indonesian government to extend the continental shelf beyond 200 nautical miles constitute an important step in preserving natural resources for future generations.

This study presents a rapid and sequential radiochemical separation method for Pu and Am isotopes in radioactive waste samples from the nuclear power plant with anion exchange resin and TRU resin. After radionuclides were leached from the radioactive waste samples with concentrated HCl and HNO3, the sample was allowed to evaporate to dryness after filtering the leaching solution with 0.45 micron filter. The Pu isotopes were separated in HNO3 medium with anion exchange resin. For leaching solution passed through anion exchange column, the Am isotopes were separated with TRU resin. The purified Pu and Am isotopes were measured by alpha spectrometer, respectively, after micro-precipitation of neodymium. The sequential radiochemical separation of Pu and Am isotopes in radioactive waste samples using anion exchange resin and TRU resin was validated with ICP-MS system.

Most of the C-14 produced is in the organic form, generated as methane (14CH4), methanol (14CH3OH), formaldehyde (14CH2O), and formic acid (14CO2H2). When analyzing C-14, it is transformed into the form of 14CO2, and its concentration is determined using LSC. Typical examples include the wet oxidation method, the combustion or Pyrolysis. The wet oxidation method uses strong acids and involves repeated operations, which generates large amounts of acid waste and secondary radioactive waste. The combustion method uses high temperatures, which requires an oxygen device. Pyrolysis also requires high temperature in a vacuum and catalysts. Catalysts are expensive because they are platinum-based. To compensate for these shortcomings, a C-14 analysis method using UV irradiation was developed. In this study, 100 mL of distilled water mixed with formic acid (CO2H2), potassium persulfate (K2S2O8), and silver nitrate (AgNO3) was irradiated with a 320-390 nm UV lamp to conduct a CO2 production reaction experiment. The UV range was measured using a photometer (UV Power puck II). The beaker was made of quartz in 150 mL size with three inlets : a temperature measurement, a sample inlet, and a collection tube connector. We changed the UV lamp used from a 450 W halogen lamp to a 100 W LED, which has a lower temperature and is safer. As a result of the experiment, CO2 bubbles were generated in the collection tube, due to the UV irradiation react, which uses oxidizer and catalysts. The maximum temperature of the solution irradiated with the LED UV lamp was less than 56°C. It confirmed the rate of bubble generation changed depending on the lamp distance, the amount of sample, oxidizer, and catalyst. In an experiment to confirm the reaction caused by heat, it was found that although a reaction occurred due to heat, the reaction was significantly lower than when using a UV lamp. The reproducibility experiment was conducted three times in total under the same conditions. It showed the same pattern. In the future, we plan to select mock samples, collect 14CO2 in Carbo- Sorb, and analyze them using LSC. The results of this research will be used as a technology to recover C-14 more safely and efficiently and will also be used to expand its application to the treatment of other wastes such as waste liquid and waste resin through simulated samples.

During the initial cooling period of spent nuclear fuel, Cs-137 and Sr-90 constitute a large portion of the total decay heat. Therefore, separating cesium and strontium from spent nuclear fuel can significantly decrease decay heat and facilitate disposition. This study presents analytical technique based on the gas pressurized extraction chromatography (GPEC) system with cation exchange resin for the separation of Sr, Cs, and Ba. GPEC is a micro-scaled column chromatography system that allows for faster separation and reduction volume of elution solvent compared to conventional column chromatography by utilizing pressurized nitrogen gas. Here, we demonstrate the comparative study of the conventional column chromatography and the GPEC method. Cation exchange resin AG 50W-X12 (200~400 mesh size) was used. The sample was prepared at a 0.8 M hydrochloric acid solution and gradient elution was applied. In this case, we used the natural isotopes 88Sr, 133Cs, and 138Ba instead of radioactive isotopes for the preliminary test. Usually, cesium is difficult to measure with ICP-OES, because its wavelengths (455.531 nm and 459.320 nm) are less sensitive. So, we used ICP-MS to determine the identification and the recovery of eluate. In this study, optimized experimental conditions and analytical result including reproducibility of the recovery, total analysis time and volume of eluents will be discussed by comparing GPEC and conventional column chromatography.

Chelating agents, such as ethylenediaminetetraacetic acid (EDTA), diethylenetriaminepentaacetic acid (DTPA), and nitrilotriacetic acid (NTA) are widely used in industry and agriculture as water softeners, detergents, and metal chelating agents. In wastewater treatment plants, a significant amount of chelating agents can be discharged into natural waters because they are difficult to degrade. Since those compounds affect the mobility of radionuclides or heavy metals in decontamination operations at nuclear facilities and radioactive waste disposal, quantification of the amount of ligand is very important for safe nuclear waste management. To predict the behavior of the main complexation in sample matrices of radioactive wastes, it is essential to evaluate the distribution of the metal-chelating species and their stabilities in order to develop analytical techniques for quantifying chelating agents. We have investigated to collect information on the pH speciation of metal chelation and the stability constants of metal complexes depending on three chelating agents (EDTA, DTPA, and NTA). For example, Zhang’s group recently reported that the initial coordination pH of Cu(II) and EDTA4− is delayed with the addition of Fe(III), and the pH range for the stable existence of [Cu(EDTA)]2− is narrowed compared to when it is alone in the sample matrix. The addition of Fe(III) clearly impacts the chemical states of the Cu(II)-EDTA solution. Additionally, Eivazihollagh’s group demonstrated differences in the speciation and stability of Cu(II) species between Cu(II) and three chelating ligands (EDTA, DTPA, and NTA). This study will be greatly helpful in identifying the sample matrix for binding major chelating agents and metals as well as developing chemically sample pretreatment and separation methods based on the sample matrix. Finally, these advancements will enable reliable quantitative analysis of chelating agents in decommissioning radioactive wastes.