국내 건설현장에서 장스팬 구조물이 증가함에 따라 콘크리트와 강재를 조합한 충전형합성보의 적용이 증가하고 있 다. 충전형합성보는 경제적이며 시공성이 향상되고 콘크리트 축열효과에 따라 내화성도 우수하다. 충전형합성보 내부에 휨성능 을 향상시키기 위해 Re-bar로 보강하여 사용한다. 이는 콘크리트 균열에 의해 부식 되어 내력저하를 유발한다. CFRP Re-bar는 경량이며 내부식성이 우수하다. 그러나 임계온도가 250℃로 낮기 때문에 화재에 취약으로 적절한 내화피복재를 적용해야된다. 따라서 열전달해석을 통해 내부 CFRP Re-bar가 보강된 충전형합성보의 온도분포를 확인하였다. 온도 상승에 따른 휨내력을 산 정하여 피복두께를 제안하고자 한다. 해석결과 단면크기에 상관없이 콘크리트 피복두께 40mm와 뿜칠내화피복재 20mm를 적용 하면 표준화재에서 3시간 내화성능을 확보하는 것으로 평가되었다.

The evolvement in the microstructure and electrical properties of PAN-based carbon fibers during high-temperature carbonization were investigated. The study showed that as the heat treatment temperature increases, the change of carbon fiber resistivity around 1100 °C can be divided into two stages. In the first stage, the carbon content of the fiber increased rapidly, and small molecules such as nitrogen were gradually released to form a turbostratic of carbon crystal structure. The resistivity dropped rapidly from 3.19 × 10− 5 Ω·m to 2.12 × 10− 5 Ω·m. In the second stage, the carbon microcrystalline structure gradually became regular, and the electron movement area gradually became larger. At this time, the resistivity further decreases, from 2.12 × 10− 5 Ω·m to 1.59 × 10− 5 Ω·m. During carbonization, the tensile strength of carbon fiber first increased and then decreased. This is because the irregular and disordered graphite structure is formed first. As the temperature rose, the graphite layer spacing decreased and the grain thickness gradually increases. The modulus also gradually increased.

Commercial carbon fiber cloth (CFC) is treated by the Joule-heating pyrolysis method in air to boost its capacitive performance on the premise of energy- and time-saving considerations. A thermoelectric coupling model suitable for the Jouleheating pyrolysis is successfully established based on the comparisons between the simulated temperatures and actually measured ones. The temperature field on CFC surface induced by the Joule heat presents a concentric-ellipse shape that the temperature in the core is the maximal and gradually decays outward. Increasing the direct current (DC) voltage which is applied to the CFC from 1.0 to 6.0 V, the core temperature on the CFC surface can be raised from 31 to 519 °C. The specific surface area and hydrophilicity of the as-prepared porous CFC are greatly improved compared with the pristine one. Electrochemical test shows that the optimal Joule-heating pyrolysis parameters falls at 5.0 V and 12.5 min, and the areal specific capacitance of as-obtained CFC-5.0-12.5 is about 80 folds that of the pristine CFC. In addition to the much shorter preparation time, all the characteristics including areal specific capacitance, rate performance, and electrical conductivity of the Joule-heating pyrolyzed CFC are superior to those of the electrical furnace pyrolyzed counterpart. The aqueous symmetrical supercapacitor made of CFC-5.0-12.5 electrodes exhibits considerable power and energy densities with respect to the previously reported carbon electrode-based supercapacitors. For conductive precursors, the Joule-heating pyrolysis can be an ideal substitute for the traditional electric furnace pyrolysis.

Different materials have been shown to "catalyze" carbon nanotube (CNT) growth in chemical vapor deposition (CVD) when they become nano-sized particles. Catalysts, which act as a kind of "seed" for CNT growth, show two types of behavior in the CVD method; precipitation of carbon atoms from the eutectic alloy forming a kind of alloy with carbon; the fact that the catalyst remains as a solid phase and forms a carbon surface layer during the CVD process. This study examines the relationship between the iron-group and non-iron-group catalyst types and the catalyst concentration and growth time of CVD-based CNT growth via emphasizing growth mechanisms. The novelty of this work is to compare and evaluate the effects of catalyst type, concentration, and growth time, which are three critical CVD parameters, on the final nanotube morphology. It was utilized five different catalysts ( Fe2O3, Fe3O4, Nb2O5, Au, and Pt), three different growth durations (3, 5, and 7 min), and three different catalyst concentrations (2, 4, and 6 wt%) to explore the morphological differences on CNT synthesis by CVD under the same process parameters. The results demonstrated that catalyst type is the most influential parameter in CVD-based CNT synthesis, while catalyst concentration and growth time are indispensable elements for the uniformity and small diameter in the final morphology.

Since soil salinization imposes various adverse effects on plants, research on how to relieve salt stress from plants is extremely urgent. We synthesized a new type of cerium-doped carbon quantum dots by a hydrothermal synthesis method. Characterization shows that the carbon quantum dots have a small and uniform particle size, high stability, high water solubility and biocompatibility. Mung bean seeds were soaked in CDs:Ce solutions under a concentration gradient (0.25, 0.5, 1, 2, 3 mg/ mL) and germinated under salt stress (150 mM NaCl). Compared with salt stress, the addition of CDs solutions effectively enhanced the ability of plants to relieve salt stress. The relieving effect on mung bean plants was the most significant after treatment with 2 mg/mL CDs:Ce, and the main root length, plant height and leaf length in comparison with the case of salt stress increased by 83%, 80%, and 60%, respectively. Chlorophyll content, peroxidase activity, superoxide dismutase activity and catalase activity, total protein content increased by 90%, 77%, 76%, 77% and 76%, respectively, malondialdehyde and proline The content decreased by 83% and 77%. Inductively coupled plasma mass spectroscopy proved mung bean plants absorbed CDs:Ce, but the absorption of NaCl decreased by 21.8%. Fluorescence imaging showed CDs:Ce was absorbed by roots, and transferred from the vascular system and apoplastic pathways to stems and leaf veins, and mainly aggregated in intercellular gaps, the vascular system, leaf veins, cilia and stomata. Stereomicroscopy showed that CDs:Ce induction increased the stomatal opening by 15.7%, and improved metabolic efficiency and NaCl excretion from the plants. Hence, CDs:Ce shows great potential in protecting crops from abiotic stress.

We report the use of face mask materials as a carbon precursor for the synthesis of multi- and single-walled carbon nanotubes (CNTs) in an open-loop chemical recycling process. Novel surgical mask precursors were suspended in toluene and injected into a chemical vapor deposition reactor previously optimized for CNT production using liquid injection. The CNTs were collected and characterized using resonant Raman spectroscopy, transmission electron microscopy (TEM) and scanning electron microscopy (SEM) before being turned into fibrils that were tested for electrical conductance. Once confirmed and repeated for statistical accuracy, a CNT-based Ethernet cable was manufactured and tested using iPerf3 for uplink and downlink speeds exceeding broadband standards worldwide. Radial breathing modes from Raman spectroscopy indicate single walled CNTs (SWCNTs) with diameters ranging from 0.8 to 1.55 nm and this matches well with TEM observations of SWCNTs with 1.5 nm diameter. This work pushes the horizon of feedstocks useful for CNT and SWCNT production in particular; this work demonstrates upcycling of materials fated for disposal into materials with positive net value and plenty of real-world applications.

Carbon is a part of all living creatures and it is the chief constructing block for life on this planet carbon occurs in several appearances, mainly as plant biomass, organic matter in soil, as gas CO2 in the air and dissipated in seawater. Soil carbon exhausts when production of carbon increases than carbon contribution. Soil comprises nearly 75% of total carbon existing on land, more than the quantity stockpiled in living animals and plants. So, soil plays a major part in maintaining a stable carbon cycle. Over the previous 150-year-period, the quantity of carbon present in the air has amplified by 30%. Majority of scientists thought that there is a straight relationship amongst amplified levels of CO2 in the air and increasing global warming. One anticipated technique to diminish atmospheric CO2 is to escalate the global packing of carbon in soils. Therefore, there is a necessity to manage soils because soil comprises more inorganic carbon as compared to the atmosphere and more organic carbon as compared to the biosphere. Soil is also thought to be a lively and important constituent in global carbon discharge and potential of sequestration. Carbon sequestration, known commonly as C-storage, can be acquired by different controlling practices, and the size of various management techniques, to enhance C-storage of soil and offer a key basin for atmospheric CO2, can be assessed most persuasively from studies conducted over long time that underwrite exclusive data on soil C accumulation, losses and storage. Sequestration happens when input of carbon enhances as compared to output of carbon. Soil carbon sequestration is the method of relocating CO2 from the air in to the soil with crop leftover and additional organic solids and in a configuration that is not instantly emitted back to the atmosphere. This review focused on beneficial role of carbon sequestrating fertilizers (press mud, boiler ash and compost) in carbon sequestration and soil properties.

Due to their fascinating properties, there is a rise in the critical consideration of carbon-based nanomaterials in a plethora of applications. Carbon nanomaterials, such as nanotubes, graphene, fullerenes, and nanodiamonds, have broad applicability and potential research prospects. In the past few years, the developments and consumption of still smaller nanomaterials, namely graphene quantum dots and carbon nanodots or carbon dots (CDs) have been explored. Since carbon as a component exhibits insignificant cytotoxicity and remarkable biocompatibility, CDs have found a wide scope of potential applications. Owing to their fascinating aspects, such as small size, biocompatibility, low toxic nature, environment-friendliness, costeffectiveness, ease of chemical functionalization, derivatization and surface modification, and photoluminescence tenability, CDs have been widely acknowledged. CDs have found major prospects in the areas of catalysis, sensors, and optical and bio-related applications. CDs are generally synthesized by employing techniques of pyrolysis, laser ablation, arc discharge, electrochemical method; hydrothermal and solvothermal techniques; and microwave and ultrasonic irradiations. This review article presents a brief account of the major properties of CDs, and applications, with particular emphasis on the green and environment-friendly synthesis methodologies. An overview of the microwave and ultrasound irradiation-induced syntheses for the preparation of CDs is presented in the light of green chemistry principles. In addition, some of the green and environmentally benign precursors for the production of CDs are outlined. The most recent work on CDs is included in this review article.

In this paper, the mechanical properties according to the rCF weight percent(10, 20, 30, 40, 50wt%) of the rCFRP specimen were evaluated and analyzed. First, to prepare rCFRP specimens, pellets were prepared according to the type of weight percent, and rCFRP tensile specimens according to ASTM D638 were prepared using an injection molding machine. Tensile tests were performed on each of 10 specimens according to weight percent conditions, and tensile strength and modulus of elasticity were calculated. For a detailed analysis of the correlation between the internal structure of the specimen and the mechanical properties, the weight percent to the constituent materials of the rCFRP specimen was calculated using mCT and used for the analysis of mechanical properties. For a more detailed analysis, a detailed analysis of the mechanical properties of rCFRP was performed through the fracture surface analysis of the specimen using FE-SEM.

The “Carbon Neutral” has become the most important goal to achieve in the era of the climate change crisis. K-water has prepared a roadmap for implementing “Carbon Neutral” by 2050. However, only the reduction targets and strategies for scope 1 and 2 have been set, so the management of carbon generated during the construction project and upfront carbon is not being implemented. Therefore, in this study, the criteria and methodology for estimation carbon emissions in the construction sector at domestic and foreign were reviewed, and a methodology for estimation carbon emissions suitable for K-water construction projects was presented, and a case study was conducted. As a result, most of the carbon emissions were more than 90% of the upfront emissions due to material production. Therefore, upfront carbon management is required for carbon management of K-water construction projects, and it is necessary to quantify carbon emissions through GHG construction inventory, etc., and to establish strategies for future reduction technologies.

We deduced the proper estimation methodology for the amount of carbon sequestration by damaged trees for Environmental Impact Assessment (EIA). The nine development projects related to renewable energy, damaged trees occur, assessment status and used method of evaluating the carbon storage of damaged trees were summarized. And after re-calculating the carbon storage of damaged trees through allometric equations, the difference between the two groups, re-calculated the damaged trees carbon storage and the damaged trees carbon storage in the report, was validated. As a result, damaged trees carbon storage in words was more than the re-calculated damaged trees carbon storage, and it was statistically significant (p<0.005). This result means that the existing method for calculating damaged tree carbon storage is overcalculated. It was judged that it was necessary to improve the calculation method. Therefore, allometric equations suitable for each dominated-tree species should be used when calculating the damaged tree carbon storage. Furthermore, we propose to establish a carbon storage calculation system based on actual data from the ecosystem so that researchers can efficiently and accurately the damaged trees carbon storage. Key words: damaged vegetation, carbon sequestration, allometric equation, environmental impact

Quality standards of activated carbon for gas-phase applications have been deleted from the Korean national standard list since 2007, and the iodine adsorption test is the only measure currently used for quality assurance. This study was performed to propose a suitable test method and a quality standard for gas-phase activated carbon. The "1/2 saturated vapor adsorption" test has been developed as a simple and convenient method to determine the adsorption capacity of activated carbon. In this study, the developed test method was evaluated using model VOCs including toluene, methyl ethyl ketone (MEK), and ethyl acetate (EA). A virgin activated carbon revealed adsorption capacities of 344mg/g, 322mg/g, and 328mg/g for toluene, EA, and MEK, respectively, and the adsorption capacity for a mixture of the three VOCs was 334 mg/g. When a regenerated activated carbon was applied, the adsorption capacities dramatically decreased to 62 mg/g, 52 mg/g, and 61 mg/ g for toluene, EA, and MEK, respectively. In addition, the 1/2 solvent vapor adsorption tests using 13 different specimens of activated carbon showed that their capacities were closely related to the iodine adsorption numbers, and this study suggested the adsorption capacity of 300 mg/g as a new quality standard. The novel test method and its standard may help to guarantee the quality of gas-phase activated carbon used for VOCs abatement processes.

음식물류폐기물 직매립, 해양투기 등이 금지됨에 따라 음식물류폐기물은 대부분 자원화를 통해 처리되며 퇴비화하여 생산한 음식물류혼합퇴비(이 하, 음폐퇴비)는 작물 생산성을 향상 등을 위하여 농경지에 퇴비로 사용한다. 하지만, 염분 집적에 의한 작물 생육이 우려되며 이에 따른 피해를 줄이기 위하여 음폐퇴비와 블랙카본, 유용 미생물을 함께 사용하면 염분에 의한 피해를 줄일 수 있을 것으로 기대된다. 이에 본 연구는 음폐퇴비와 바이오차의 한 종류인 블랙카본, 유용 미생물을 처리 시 상추의 수량과 토양 특성 변화를 알아보고자 하였다. 처리구는 무비구(NF), 무기질 비료 (NPK), 무기질 비료 + 음폐퇴비 (NPKF, 대조구), 무기질 비료 + 음폐퇴비 + 블랙 카본 (NPKFC), 무기질 비료 + 음폐퇴비 + 미생물 (NPKFB), 무기질 비료 + 음폐퇴비 + 블랙카본 + 미생물 (NPKFCB)이다. 상추 생육 조사 결과, 생육 후기인 21일째에 NPKFCB 처리구에서 엽장 20.7 cm, 엽폭 20.2 cm, SPAD-502 32.0으로 가장 생육이 좋았으며, 수량 조사 결과 또한 NPKFCB 처리구에서 주당 총 엽수가 28.8개로 가장 많았다. 수량지수는 무처리가 84.1로 가장 낮았고 NPKFCB 처리구에서 128.7로 가장 높았다. 이는 블랙카본에서 공급되는 K, P, Ca 등의 양분과 미생물 활성화가 작물 생산성 향상에 도움을 준 것으로 판단된다. 토양 화학성 분석 결과 pH는 NPKFB 처리구에서 6.9로 가장 높았으며, EC는 NPKF에서 1.7 dS m-1로 가장 높았다.

This study investigated the culture characteristics of Cryptoporus volvatus, whichis grow naturally in Korea, to determine the suitable environmental conditions for its cultivation. The physiological characteristics of the mycelia were assessed according to the cultivation conditions, to determine the optimal conditions for artificial cultivation. The visual characteristics of the hyphae of Cryptoporus volvatus KACC52303 included an irregular and uneven surface and a fuzzy or cotton-like texture. Under the microscope, its microstructure showed pre-chlamydospore formation, but no clamps were seen. The appropriate culture temperature was found to be a medium/high temperature of approximately 25–30oC, and the optimal pH was found to have a wide range from weakly acidic (pH 4) to neutral (pH 7). In the optimal nutrient source experiment, hyphal growth was shown to be fair in a mixed medium with 2.5% dextrin as the carbon source and 0.1% yeast extract as the organic nitrogen source. Among the various amino acids, organic acids, and inorganic salts tested, the fastest hyphal growth was observed in the presence of leucine, acetic acid or gluconic acid, and KCl or KH2PO4, respectively. The column test showed that the best mycelial growth occurred in a mixed medium of 80% pine sawdust, 10% rice bran, and 10% corncob sawdust.