We divided the sample into four groups by temperature regimes and comparing the Lethal effect after exposure to high room temperatures for 50~58 days. After inoculating Cnidium officinale Makino with Tribolium castaneum Herbst, the storage insects of medicinal herbs, was 20 respectively. The results of treating cut Cninium officinale Makino are listed below. Survival rate of group A by exposure of 5 times at 35~36.5℃ is less than 7.5%. Survival rate of group C by exposure of 5 times at 35.5~39.5℃ and group D by exposure of 23day at 37~44℃ is less than 2.5%. Especially in the case of group D, we found that complete eradication of the insect is difficult despite exposure high temperature for a long time. Also most of the grinded Cninium officinale Makino has the same patten but group B by relatively treated low temperature has a significant difference in mortality. Insect mortality in cut Cninium officinale Makino by exposure at 35℃ and 39.5℃ is 7.5% and the insect mortality in grinded Cninium officinale Makino by exposure at 39. 5℃ is only 75%. The reason is estimated that heat conduction of grinded Cninium officinale Makino is slow and it was less shocked by heat because The final core temperature of medicinal herbs is relatively low about 0.5~2℃. This means that storage insect(Tribolium castaneum Herbst) can be suppressed at mid-high temperature if it is to be treated more than 50 days without problem of quality deterioration of medicinal herbs that can be caused by high temperature.

During the fierce competition among the companies, improvement of logistics center managing efficiency is importantly recognized. Among them, studies on improvement of picking work process on about 55% of logistics center managing costs are continuously conducted. And, most of studies focus on analysis on strengths and weaknesses of picking method performable on the stage of logistics center design, etc, so the purposes of this research are to define load location rule by product releasing frequency in logistics managing environment based on conveyer and suggest expected effects by simulation analyzing method to improve picking managing efficiency.

Wind turbine tower has a very important role in wind turbine system as one of the renewable energy that has been attracting attention worldwide recently. Due to the growth of wind power market, advance and development of offshore wind system and getting huger capacity is inevitable. As a result, the vibration is generated at wind turbine tower by receiving constantly dynamic loads such as wind load and wave load. Among these dynamic loads, the mechanical load caused by the rotation of the blade is able to make relatively periodic load to the wind turbine tower. So natural frequency of the wind turbine tower should be designed to avoid the rotation frequency of the rotor according to the design criteria to avoid resonance. Currently research of the wind turbine tower, the precise research does not be carried out because of simplifying the structure of the other upper and lower. In this study, the effect of blade modeling differences are to be analyzed in natural frequency of wind turbine tower.

This paper examines the pounding problem between adjacent decks subjected to strong earthquakes. The elastomeric bearings in an isolated bridge reduce the stresses on the superstructure and cushion the impact by transferring smaller seismic forces to the substructure. On the other hand, these bearings also allow large horizontal displacement of the superstructure due to seismic forces. Bridges having various supporting soil conditions and different frequency ratios between adjacent decks are investigated by numerical analysis. In the analysis, decision making is conducted whether the collision took place or not and, the magnitude of pounding force and the duration time of collision are obtained and the results are discussed.

In this study, to apply hydrogen energy to ship engine and to generate effective hydrogen production, we investigated the effects of high temperature H₂SO₄ feed rate and cooling water rate to pump parts with fixed frequency needed to reciprocate motion and a simulation was conducted at each condition. In the fixed frequency and cooling water inlet flow rate of 0.5 Hz and 3.9 kg/s, we changed the high temperature H₂SO₄ flow rate to 47.46 kg/s (it is 105 % of 45.2 kg/s), 49.72 kg/s (110 %), and 51.98 kg/s (115 %). Also, at 0.5 Hz and 45.2 kg/s of frequency and high temperature H₂SO₄ flow, the thermal hydraulic analysis was performed at the condition of 95 % (3.705 kg/s), 90 % (3.51 kg/s), and 85 % (3.315 kg/s). In overall simulation cases, the physical properties of materials are more influential to the temperature increase in the pump part rather than the changes on the feed rate of high temperature H₂SO₄ and cooling water. A continuous operation of pump was also capable even if the excess feed of high temperature H₂SO₄ of about 15 % or the less feed of cooling water of about 15 % were performed, respectively. When the increasing feed of high temperature H₂SO₄ of up to 5 %, 10 %, and 15 % were compared with base flow (45.2 kg/s), the deviation of time period rose to a certain temperature and ranged from 0 to 4.5 s in the same position (same material). In case of cooling water, the deviation of time period rose to a certain temperature and ranged from 0 to 5.9 s according to the decreasing feed changes of cooling water at 5 %, 10 %, and 15 % compared to a base flow (3.9 kg/s). Finally, the additional researches related to the two different materials (Teflon and STS for Pitch and End-plate), which are concerned about the effects of temperature changes to the parts contacting different materials, are needed, and we have a plan to conduct a follow-up study.

본 연구는 FDR(Frequency Domain Reflectometry) 센서를 이용하여 코코넛 코이어 배지에서 급액 공급관리에 적합한 수분측정 장소를 찾고 보다 정밀한 측정 방안을 제시하기 위한 기초 실험으로 급액구에서의 측정거리와 위치 그리고 노이즈 필터 사용에 따른 수분변화와 편차를 조사하였다. 시판되는 코코넛 코이어 슬라브 중 coir dust 와 chip의 함량이 10:0, 7:3, 5:5, 3:7인 배지들을 사용했고 배지 윗면과 측면에 급액구부터 5, 10, 20, 30cm의 거리를 두어 센서를 설치하여 동일한 급액을 공급한 후 수분변화를 측정하였으며, 노이즈 필터 사용 여부에 따른 수분변화는 내부가 균일한 인공토양인 글라스 비드를 포수하여 설치간격 0, 6, 12, 21cm에서 측정하였다. 배지조성에 상관없이 센서가 급액구에 가까울수록 높은 수분함량 증가를 나타내었다. 배지 조성 3:7과 10:0에서는 윗면과 측면 측정에 따른 배지 수분함량 변화 특성이 차이를 보이지 않았으나 5:5와 7:3에서는 윗면을 측정시 보다 높은 수분함량 증가를 보였다. Chip 함량이 상대적으로 많은 3:7 배지에서는 다른 배지들보다 수분함량 증가가 낮았다. 노이즈 필터를 사용하게 되면 측정치 변동과 편차가 감소하였다. 따라서, 코코넛 코이어 배지에서 FDR센서를 이용해 배지 수분 계측시 급액구에 가까운 거리의 윗면을 측정하는 것이 급액 이후 배지내 변화를 관측이 용이하다. 다수의 센서를 사용하여 측정할 경우에는 센서 간 간격을 21cm 이상으로 넓게 설치하도록 하며, 노이즈 필터는 측정 안정성 향상을 위해 사용을 권장한다.

In order to make up vacancy of words frequency on ancient bronze objects in Western Zhou Dynasty in diachronic development perspective, we sorting out some conclusions through the exhaustive statistical development data of words frequency diachronically. We found two ends concentration of word frequency in bronze inscription from the early to late in the Western Zhou Dynasty have decreased significantly, which reflects ideographic writing system increasingly mature trend; we also found the word frequency variation is keeping pace with the time trend. In other words, disappearance of those old words is the acceleration and appearance of new words has a trend for reducing the speed. We conclude that focus of inscriptions discourse topic did not change through each period distinctive word frequency semantic category research. Changes and development of language content is mainly caused by "social appellations", which always dominant semantic units’ substitutions and changes.

목 적: 13.56 MHz Radio Frequency(RF) 고주파 송수신 장치를 만들고, 이를 이용하여 ITO안경렌즈 코팅 막의 두께와 전면커브에 대한 유도기전력 감소를 관찰하여 ITO 박막두께 측정을 연구하였다. 방 법: 전자빔 증착 장치를 이용하여 안경렌즈 하드 코팅 막 위에 다층막 코팅(SiO2/ZrO2/SiO2/ZrO2/SiO2/ITO/발수코팅막)을 하였는데, 이 때 ITO 코팅 시 이온빔 보조 장치를 사용하였다. 광투과율측정기로 ITO 코팅 안경렌즈의 투과율을 확인하였고, 13.56 MHz 수정발진소자를 사용하여 RF 고주파 송수신 장치를 만들었으며, 이 송수신 장치로부터 ITO 박막의 두께와 안경렌즈 커브에 의한 유도기전력의 감소량을 측정하였다. 결 과: 광투과율 측정 장치를 이용하여 ITO 안경렌즈 박막 두께에 따른 투과율을 측정한 결과, 가시광선 영역에서 ITO 박막이 두꺼워짐에 따라 처음에는 약간 증가하다가 점차 감소하는 경향을 나타내었다. 또한 RF 고주파 송수신 장치에서 안경렌즈를 RF 송수신 코일 위에 놓았을 때 유도기전력의 감소량은, 각각의 커브에서 ITO 두께가 커짐에 따라 유도기전력의 감소량이 증가함을 알 수 있었다. 또한 안경렌즈를 RF 송수신 코일 위에 놓았을 때 유도기전력의 감소량이 안경렌즈를 RF 송수신기 코일 안에 놓았을 때 유도기전력의 감소량보다 큰 것을 알 수 있었다. 결 론: 13.56 MHz RF 고주파 송수신 장치를 만들고, 이를 이용하여 ITO 안경렌즈 코팅 막의 두께와 전면커브에 대한 유도기전력 감소를 관찰한 결과, 안경렌즈를 RF 송수신코일 위에 놓았을 때 유도기전력의 감소량은 각각의 커브에서 ITO 두께는 커짐에 따라, 안경렌즈 전면 커브는 작아짐에 따라 증가함을 알 수 있었다.

만병초의 종자는 20οC에서 발아율이 69.1%로 가장 높았고, 25οC는 63.0%이고, 상온에서는 발아율이 52.9%로낮았다. 광 조건에 따른 발아특성은 LED 보광 및 자연광에서 60% 이상 발아되었으나 차광 시에는 발아율이40% 이하로 현저하게 낮았다. 만병초 종자를 인공배양토에 vermiculite 또는 peatmoss를 50% 혼합하여 파종한결과, 발아율은 큰 차이 없이 51.6~58.2%로 나타났다.복토 깊이에 따른 발아율은 무 복토가 62.3%, 2mm 복토는 60.2%에 비하여 6mm복토는 3.5%로서 복토의 깊이가 깊어질수록 발아율이 현저하게 낮아졌다. 관수 방법에 따른 발아율은 1일 2회 관수와 1일 1회 관수하였을 때 58~63%로 발아율이 양호하였으며, 3일 1회관수 시 발아율이 10.6%로 현저하게 떨어졌다. GA325ppm에서 GA3 100ppm까지 20οC와 25οC에서 처리 농도가 증가할수록 발아율이 증가하는 경향이었다. GA3 100과 200ppm을 처리한 종자의 발아율은 농도간 차이 없이97.3~98.6%로 높았고, 50ppm 처리에서는 80%이상의 발아율을 보였으나 25ppm 처리는 73.0%를, 무처리는 64.0%이였다.

The current concern about these materials (MoSi2 and NbSi2) focuses on their low fracture toughness below theductile-brittle transition temperature. To improve the mechanical properties of these materials, the fabrication of nanostructuredand composite materials has been found to be effective. Nanomaterials frequently possess high strength, high hardness, excellentductility and toughness, and more attention is being paid to their potential application. In this study, nanopowders of Mo, Nb,and Si were fabricated by high-energy ball milling. A dense nanostructured MoSi2-NbSi2 composite was simultaneouslysynthesized and sintered within two minutes by high-frequency induction heating method using mechanically activated powdersof Mo, Nb, and Si. The high-density MoSi2-NbSi2 composite was produced under simultaneous application of 80MPa pressureand an induced current. The sintering behavior, mechanical properties, and microstructure of the composite were investigated.The average hardness and fracture toughness values obtained were 1180kg/mm2 and 3MPa·m1/2, respectively. These fracturetoughness and hardness values of the nanostructured MoSi2-NbSi2 composite are higher than those of monolithic MoSi2 orNbSi2.

Natural frequency characteristic of Wind turbine tower is important for designing of tower due to guarantee of structural safety of tower. In GL specification, natural frequency of tower should be designed by consideration of blade rotational frequency. Natural frequency characteristic of tower could be changed by mass ratio of RNA-tower, modeling method of blade and angle of blade in idling condition. In this research, natural frequency of tower is analysed by ABAQUS and compared it result according to tower dimension.

This paper sought to analyze the frequency of appearance of final consonants in Korean in order to provide basic data for teaching foreign learners pronunciation. In this paper, the audio materials contained in the elementary textbooks, ‘Korean as a foreign language 1, 2’ were transcribed into Hangul and the frequencies of appearance of phonemes were analyzed using SynKDP ver 1.6. The results showed that the frequency of final consonants out of all phonemes was approximately 14%. Of the final consonants, 88% were shown to be sonorants /m, n, ŋ, I/ and 12% were shown to be obstruents /p˥, t˥, k˥/. The frequency of appearance of nasal sounds /m, n, ŋ/ was shown to be quite high at approximately 66%. The ratio of obstruents that became nasal sounds by the nasal assimilation, was shown to be approximately 16%. Lateral /l/ sound showed a frequency of 21% and only 1% of them were identified to be the result of the lateralization of obstruents. Meanwhile, approximately 74% of obstruent final consonants involved fortition, and only approximately 26% were pure obstruent final consonants. Finally, cases where the aspiratization occurred after neutralization were found in only 57 words out of 5,577 words in total. Pedagogical implications are discussed.

Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties, including high strength, high hardness, excellent ductility and toughness. In this study, nanopowders of Al2O3, MgO and TiO2 were prepared as starting materials by high energy ball milling for the simultaneous synthesis and sintering of the nanostructured compound Mg4Al2Ti9O25 by high-frequency induction heating process. The highly dense nanostructured Mg4Al2Ti9O25 compound was produced within one minute by the simultaneous application of 80MPa pressure and induced current. The sintering behavior, grain size and mechanical properties of the Mg4Al2Ti9O25 compound were evaluated.

복합재료 사이에 주파수 선택적 투과막(Frequency Selective Surface)을 삽입하여 동시경화 공정을 이용하여 주파수 선택적 투과 기능을 가지는 하이브리드 복합재료를 성형하면 재료들 간의 열팽창 계수와 강성의 차이로 인해 구조 내에 잔류 열응력이 발생하게 되고, 이로 인하여 스프링 백 현상이 발생한다. 따라서 복합재의 적층에 따른 영향을 알아보기 위해 복합재료의 적층각을 선택적 투과막(Frequency Selective Surface)을 중심으로 대칭과 비대칭 적층으로 적용하여 하이브리드 구조의 잔류 열응력을 예측하고, 이에 대한 스프링 백에 대해서 연구하였다.

본 연구에서는 코히어런스 분석을 통하여 시각집중 기간 동안 시간 변화에 대한 뇌기능과 관련된 공간-주 파수간 연관관계를 해석하였다. 집중관련 시각자극 실험 데이터를 통해 θ 와 α 대역에서 서로 다른 두피 위치 간 위상연관변화를 확인하였다. 좌우 전두엽, 전두엽과 두정엽 간 뇌유발전위는 P100, N200지점에서 위상동조를 보였으며, 전두엽과 후두엽 간 뇌유발전위는 시각 처리 정보가 반영되는 P300지점에서 위상동조를 보였다. 고정된 길이의 창을 이용하는 단구간 푸리에 변환에 비하여 연속 웨이블릿 변환은 모 웨이블릿의 파라미터 조정을 통한 다중해상도 분석이 가능하였다. 따라서 연속 웨이블릿 변환을 이용한 코히어런스 결과가 시간 변화에 대한 뇌유발전위의 공간-주파수간 연관관계의 변화를 확인하는데 유효함을 확인하였다. 비 집중 자극수행에 대해서는 위상동조 현상이 나타나지 않았다.

The primary purpose of this study was to examine prominent features of frequency in the new vocabulary of the middle school English textbooks based on the 2007 revised national curriculum and thereby to provide meaningful data to be compared with those on the 2009 revised national curriculum. This study used an online software (Vocabprofile) to divide words into four categories by frequency: K1 (1-1,000), K2 (1,001-2,000), AWL (Academic Words List), and Off-List Words (the remainder). Salient features discovered from the frequency-based categorization of words in textbooks by grades or publishers were further examined for pedagogical implications regarding textbook writing and curriculum revisions in the future. The analysis has revealed the following results. K1 words accounted for the most among the words presented in English textbooks, reflecting the significance of the high-frequency words in L2 learning. The number of other words showed a steady increase as the grade gets higher. Finally, most textbooks presented multi-words as new vocabulary, which indicates the importance of idioms or collocations. The vocabulary analysis by frequency could be of use to textbook evaluation, considering the growing importance of frequency-based vocabulary teaching.

PTEF membranes are used for roofing materials of membrane structures. PTEF is the abbreviation of Poly-tetra Fluotide-ethylene. These materials are consisted of fiberglass weave and polyetrfluoroethylene coating. Also, PTEF membranes have some problems of structural capacity by wind or snow load, etc. In this study, sensor housings using lead switches are bonding in PTFE membranes, Monitoring to changes tension and tear damages are studied using radio frequency. If tension is received on edged membranes, bonded lead switches of sensor housings will be destroyed by changes tension, and these become to send signals of damages at the connected radio frequency system with increased tension. Study of these functional membrane materials will be contributed to prevent water leakage and long-term maintenance of membrane structures.

According to natural frequency of soil, characteristics of earthquake responses of an isolated containment building in nuclear power plants are examined. For this, earthquake response analysis of seismically isolated containment buildings in nuclear power plants is carried out by strictly considering soil-structure interactions. The structure and near-field soil are modeled by the finite element method while far-field soil by consistent transmitting boundary. The equation of motion of a soil-structure interaction system under incident seismic wave is derived. The derived equations of motion are solved to carry out earthquake analysis of a seismically isolated soil-structure system. Generally, the results of this analysis show that seismic isolation significantly reduces the responses of the soil-structure system. However, if the natural frequency of the soil is similar to that of the soil-structure system, the responses of the containment buildings in nuclear power plants rather increases due to interactions in the system.

본 연구는 토마토 수경재배에서 Frequency Domain Reflectometry(FDR) 센서를 활용한 무배액 시스 템에 적합한 코이어 배지의 chip과 dust 비율을 구명하기 위한 기초 실험으로 chip 함량에 따른 일일 급액량, 배액량, 배지의 용적당 수분함량 및 전기전도도, 식물생육, 과실 수량과 수분이용효율 측정을 목적으로 수행되었다. 시판 코이어 슬라브 중 chip과 dust 부피비율이 0 : 100%, 30 : 70%, 50 : 50%, 70 : 30%인 것과 대조구로 시판 rockwool 배지와 2층 슬라브, 즉 1층에 chip함량과 2층에 dust함량이 15 : 85%, 25 : 75%, 35 : 65%인 것을 사용하여 실험하였다. 실험에 사용된 배지 중 0 : 100%와 rockwool 배지는 전 생육기간 동안 배액이 배출 되지 않았고 나머지 모든 배지에서도 극소량의 배액이 배출되었다. 일일 평균 급액량은 시판 슬라브와 2층 슬라브 배지 모두에서 chip 함량에 따라 다르게 나타났다. 식물 생육, 상품과 수량 및 수분이용효율은 chip과 dust의 비율이 0 : 100%인 시판 슬라브에서 가장 높게 나타났다. 따라서, FDR센서에 의한 자동급액 방식으로 토마토 작물을 재배 할 때 chip과 dust 부피비율이 0 : 100%인 코이어 배지를 사용할 경우 식물이 더욱 효과적으로 수분을 이용하여 생산량이 증가되면서도 배액을 최소화하거나 배액을 창출하지 않아 환경오염을 감소시킬 수 있다. FDR 센서에 의해 자동 급액되는 시스템에서 1회 급액량과 급액간격 기능을 생육단계별로 조정하여 배지의 물리성에 따른 급액 일정에 대한 세밀한 실험이 앞으로 수행될 계획이다.

우리나라에서 악취 규제는 배출원의 부지경계선과 배출구에서 농도 규제치를 사용한다. 그러므로 수용체에서 정확한 체감악취의 유무를 쉽게 판단하기는 곤란하다. 비록 개개인의 악취에 대한 응답을 결정하는 변수는 다양하고 응답 종류도 광범위하게 나타나지만, 일반적으로 악취에 대한 규제는 다양한 변수를 고려하여 구성되며, 이들 변수에는 악취 발생빈도, 강도, 기간, 불쾌도, 지역 변수 등이 있다. 본 연구에서는 매사추세츠(미국), 뉴질랜드, 덴마크, 네덜란드, 호주 서부, 타이완 등 6개 지역의 악취 규제를 사용하여 소각장 주변에서 악취 영향 거리를 비교하였다. 악취 영향 거리를 평가하기 위하여 이들 6개 지역 규제는 악취 농도와 허용 빈도를 고려하고 있다. 연구 결과에 의하면 악취에 의한 영향 거리는 0.5~1.4 km의 범위로 나타났다. 악취 농도를 고정하고 허용 빈도를 변경하는 경우 허용 빈도가 높을수록 영향 거리는 크게 나타났다. 허용 빈도를 고정하고 농도를 변화시키는 경우 농도가 높으면 영향거리가 줄어들었다. 결론적으로 악취 영향 범위는 악취 농도뿐 아니라 허용 빈도에 따라 변화하였다.