Minuartia laricina (L.) Mattf. is a Korean native plant with high potential as a commercial flowering potted plant due to its compactness and long flowering duration. However, because this plant is a groundcover, it is susceptible to lodging and leggy growth. Therefore, this study investigated the effects of plant growth retardants (PGRs) on the inhibition of stem elongation and flowering characteristics of M. laricina. Commercial products, Trimmit, Cycocel, and B-Nine, were used for the exogenous PGR application of paclobutrazol (PBZ), chlormequat chloride (CCC), and daminozide (DMZ), respectively. Application concentrations were 50 and 100 mg·L-1 for PBZ; 100, 500, and 1,000 mg･L-1 for CCC; and 500, 1,000, and 2,000 mg·L-1 for DMZ. Paclobutrazol was the only PGR that inhibited stem elongation. The stem lengths of the plants treated with 50 or 100 mg·L-1 PBZ were 2.2 cm (13%) or 9.8 cm (57%) shorter, respectively, than those of the control. 50 mg·L-1 PBZ retarded stem growth effectively without negatively affecting flowering or other growth parameters, whereas 100 mg·L-1 PBZ caused excessive dwarfing and significantly reduced flowering by 59%. CCC and DMZ applications were ineffective for growth control. Flowering time was accelerated with most PGRs, except for 2,000 mg·L-1 DMZ, reducing the time to flowering by 2–8 days. These results indicate that the stem growth of M. laricina was successfully inhibited with PBZ but not with CCC or DMZ. Thus, we concluded that a single application of 50 mg·L-1 PBZ or similar treatment is effective in miniaturizing M. laricina without causing harm to its growth or aesthetic value, such as the flower number. Additionally, because CCC and DMZ are not persistent in the growing medium, testing multiple application times for these PGRs is crucial.

Lactuca scariola L. is one of ecosystem-disturbance plants that grow everywhere such as roadsides, grasslands, railroads, banks, and fields. L. scariola usually occurs in autumn. It overwinters in rosette form. It flowers and produces seeds in early summer of the next year. Seeds of L. scariola can germinate immediately without dormancy when the temperature is over 20°C. Due to endogenous bacteria in seeds of L. scariola, it has a strong drought tolerance. Thus, it can grow well on roadsides. L. scariola should be controlled as it can result in 60-80% of soybean yield loss at densities above 50 plants m-2. It is advisable to remove L. scariola as it competes with native plants by acting as a pioneer to other ecosystem-disturbance plants. Among various control methods, chemical control is the most effective method that is widely used. Soil treatment with herbicides such as oxyfluorfen EC and pendimethalin EC can inhibit the development of L. scariola. Foliar treatment herbicides glyphosate and glufosinateammonium are widely used. L. scariola is resistant to 2,4-D, dicamba, and MCPA among foliar treatment herbicides. Thus, it is recommended to apply herbicides with different modes of action.

The spread of invasive alien plants is one of the most important causes of habitat and biodiversity loss. This research was conducted to secure basic data for the control of the invasive alien plant Solidago altissima. The following research objects were examined: the control; one-time mowing in June (1M6); twotime mowing in June and July (2M6M7); one-time mowing in Jun plus one-time Uprooting in July (2M6U7). The length growth in October, when the growth of S. altissima was completed, was in the order of control (199±19.96 cm), 1M6 (152±13.41 cm), 2M6U7 (54±3.17 cm), and 2M6M7 (45±19.96 cm). The 2M6M7 and 2M6U7 treatment was the most effective at inhibiting S. altissima of density, of 50.8% and 26.2% compared to the control, respectively. In contrast, one-time mowing (1M6) resulted in an increase in density compared to the control by 119.7%. In addition, this treatment also reduced flowering rate (%) of S. altissima. The most effective treatment among those tested was 2M6U7.

In assessing the seismic safety of nuclear power plants, it is essential to analyze the structures using the observed ground motion. In particular, spatial variation in which the characteristics of the ground motion record differ may occur if the location is different within the site and even if the same earthquake is experienced. This study analyzed the spatial variation characteristics of the ground motion observed at the structure and site using the earthquake records measured at the Hamaoka nuclear power plant. Even if they were located on the same floor within the same unit, there was a difference in response depending on the location. In addition, amplification was observed in Unit 5 compared to other units, which was due to the rock layer having a slower shear wave velocity than the surrounding bedrock. Significant differences were also found in the records of the structure’s foundation and the free-field surface. Based on these results, the necessity of considering spatial variation in the observed records was suggested.

This study aims to investigate the physicochemical properties of meat analogs by using high and low moisture extrusion processes to create a plant-based analog burger patty material. The isolated soy protein blends of low- and high-meat analogs (LMMA and HMMA) were texturized using the twin-screw extruder equipped with a cooling die. The highest hardness, cohesiveness, chewiness, and cutting strength were observed in beef, but the highest stringiness was indicated in HMMA. The highest integrity index was seen in beef, while LMMA had the highest nitrogen solubility index (NSI). LMMA also had the highest water holding capacity (WHC) and water absorption capacity (WAC), whereas beef had the highest oil absorption capacity (OAC). LMMA had the highest emulsifying activity (EA) and emulsion stability (ES) in emulsifying properties. Further, the highest protein digestibility was revealed in LMMA. This study suggested that extrusion process types influence the quality of meat analog, which could be the elementary source for manufacturing the analog burger patty.

Heavy bitumen scattered in the underground sedimentary layer is a kind of unconventional energy source, and by extracting it, a production well is excavated in the sedimentary layer and high-temperature and high-pressure steam is injected to reduce the viscosity of bitumen and recover it to the ground steam assisted method is applied. As a recovery method that uses the steam effect of the dilution effect of solvent injection, it is a recovery method that can increase thermal efficiency. In this study, the process system of the central processing facility(CPF) of the hybrid steam-solvent recovery method that injects solvent into the existing steam assisted method was analyzed, and the core facilities for each process were identified, and hybrid steam-solvent recovery compared to the existing steam assisted method. In the case of the method, it was evaluated that the amount of steam supply and all utility costs decreased according to the solvent injection.

생태복원은 생태계의 건강성과 지속성에 있어 생물다양성의 손실을 막을 수 있는 좋은 수단으로 인식되어 있으나 식물종 선정에 관한 환경, 생리·생태요인, 복원목표 설정 등 종합이고 객관적인 기준점이 없어 실행에 옮기는데 애로사 항이 있다. 이에 전문가 그룹의 의견을 종합하는 델파이 기법을 활용하여 생태복원용 식물종을 선정하는데 필요한 평가지표를 개발하였다. 생태복원 등의 전문가를 대상으로 2회에 걸쳐 38부의 설문조사를 시행하여, 복원 대상지를 내륙과 도서 지역으로 나눠 평가지표의 중요도와 우선순위를 분석했다. 중요도 분석 결과, ‘자생식물’이라는 평가지표 가 내륙과 도서 지역에서 모두 평균 4.9로 가장 높았다. 다음 ‘종자확보’, ‘증식’, 활착률’ 순으로 높았다. 내륙의 지표 우선순위는 ‘자생식물’, ‘출현빈도’, ‘활착율’, ‘분포범위’, ‘종자확보’로 도서 지역은 ‘자생식물’, ‘활착율’, ‘출현빈도’, ‘분포범위’, ‘내성’ 순으로 나타났다. 중요도와 우선순위 분석을 수행한 결과 ‘내륙의 중요도 평균값은 4.1, 우선순위 2.9로 도서지역은 중요도 평균값은 4.2, 우선순위 2.9로 기준을 설정하였다. 생태복원용 식물종 선정의 중요도와 우선순 위는 ‘자생식물’이 중요도와 우선순위가 가장 높은 것으로 나타났다. 다음은 ‘종자확보’, ‘활착율’, ‘지형’, ‘증식’, ‘내 성’, ‘토양조건’, ‘생육특성’, ‘천이초기’, ‘분포범위’, ‘출현빈도’, ‘발아율’이 중요도와 우선순위가 낮은 하위 그룹으로 분류되었다. 가장 낮은 지표는 ‘천이 최종단계’, ‘천이장기’, ‘천이중기’, ‘뿌리’, ‘번식’, ‘토양’, ‘성상’, ‘기술’, ‘경관’, ‘기후’, ‘발아율’로 구분되었다. 이에, 생태복원용 식물종 선정을 위해 객관적 검증을 통한 생태복원용 자생식물 종 선정을 위한 평가지표로 복원사업에 활용되기를 기대한다.

희귀식물과 특산식물의 보전연구는 국가적 수준에서 식물다양성 유지를 위해 우선되어야 한다. 식물다양성 보전의 필요성에 따라 이들 분류군이 대상이 되는 다양한 연구가 보고되었다. 이러한 시점에서 지금까지의 연구결과를 비교하 고 평가할 필요성이 증가하였다. 그리고 수집된 자료를 분석한 결과로부터 국내 희귀식물과 특산식물의 효과적인 보전을 위해 필요한 연구항목과 연구의 방향을 재검토할 필요가 있다. 우리는 희귀식물 및 특산식물이 연구의 대상이 되는 전 세계적인 연구동향을 수집하였다. 그리고 특별히 한국에서의 연구동향을 수집하였다. 희귀 및 특산식물에 대한 연구 분야를 6개의 분야로 구분하였고 그 중 보전생태학의 분야는 ‘종 특성연구’, ‘개체군 연구’ 및 ‘생물학적 상호작용’의 세부항목으로 구분하였다. 수집된 연구를 종합해 볼 때 보전생태학적 연구는 권역별 그리고 국가별로 큰 차이가 있었다. 보전생태학 연구는 권역별로는 유럽과 북아메리카에서 활발하게 진행되었고 국가별로는 일본과 미국에서 비율이 높았다. 반면에 한국은 기초생태학 연구의 비율이 가장 높았고 보전유전학, 복원생태학 순이었다. 한국에서 보전생태학 연구비율은 세계적인 수준에 비해 낮은 것으로 나타났다. 뿐만 아니라 희귀식물과 특산식물 중에서 환경부 지정 멸종위기식물과 같은 특정 분류군에 대한 연구가 주를 이루었다. 특히, 우리나라에서는 보전유전학 및 복원생태학 연구의 비율이 높았다. 세계적인 연구동향, 특히 보전생태학적 연구를 선도하는 유럽 및 북아메리카와 비교해 볼 때 우리나라에서 희귀 및 특산식물의 효과적인 보전을 위해서는 종 특성에 대한 정보 확보, 개체군 구조와 동태 그리고 식물과 식물, 동물과 식물과의 상호작용을 포함하는 보전생태학적인 연구의 비율을 높이는 접근이 필요함 을 제안하였다.

This study aims to investigate protein consumption market trends in Korea. Protein consumption was divided according to the protein source into meat, fishery, and plant-based protein. To accomplish the goal of this study, food purchase data from 525 households panels collected by the Rural Development Administration over the last 10 years were used. The results of the study showed an increase or decrease in protein consumption by protein type over the last 10 years, and a reason to explain this change has been suggested. Specifically, this study found a dramatic increase in the consumption of several proteins, including beef sirloin, beef tenderloin, seasoned beef & steak, pork belly, pork shoulder, pork neck, seasoned pork, pork cutlet, sweet and sour pork, canned ham, chicken drumstick, chicken breast, dak gangjeong, Chinese fried chili chicken, salmon, eel, abalone, squid, octopus, webfoot octopus, octopus minor, canned whelk, tofu, cold bean soup,and plant-based milk. Some items showed no increase in consumption (such as beef jerky, pork rib, sausage, bacon, whole raw chicken, cutlass fish, oyster, fish cake, crab stick, surimi sausage,and canned fishery), whereas a few items showed decreased consumption (e.g., mackerel, pollack, cod,and canned tuna)

식물공장에서 적합한 광을 선정하기 위해서는 양적인 측면 과 기능적 측면 뿐만 아니라 운영비를 고려하기 위하여 전기 에너지이용효율과 광이용효율을 동시에 고려해야 하는데 본 연구에서는 들깨를 위한 LED광원의 광량, 적색광과 청색광 의 혼합 비율과 광주기 조건별 생육 특성과 전기에너지이용효 율과 광이용효율을 함께 비교하였다. 광량 처리구는 60, 130, 230, 320μmol·m-2·s-1 조건으로, 광질 처리구는 적색광과 청 색광의 혼합 비율 8:2, 6:4, 4:6, 2:8 조건으로, 일장 처리구는 낮 기준 9, 12, 15, 18시간으로 처리하였다. 광량 실험에서는 광량이 높을수록 생육량이 늘어나는데 비해 소비전력당 건물 중의 광이용효율은 유의차가 없었다. 소비전력당 엽생체중을 추가로 비교해보면 320μmol·m-2·s-1 처리구에서만 유의적으 로 낮은 효율을 보였고 이외의 처리구에서는 유의차가 없었기 때문에 생산량이 가장 많은 230μmol·m-2·s-1가 가장 효율적 이었다. 광질 실험에서는 적색광과 청색광의 혼합 비율은 RB 8:2에서 생육량과 광이용효율이 동시에 높게 측정되었고 색 차와 flavonoids 함량에서는 유의차가 발생하지 않아 Red: Blue 비율 8:2가 가장 적합한 조건이었다. 광주기 실험에서는 광주기가 길어질수록 높은 생육량을 나타냈는데 일장 12시간 이상에서는 생육량의 유의차가 없었으므로 광소비 효율을 고 려한 12시간이 적합한 조건이었다. 이상의 결과를 바탕으로 식물공장에서 들깨 생육을 위한 LED 광 환경 조건으로는 광 도, 광질과 일장은 각각 230μmol·m-2·s-1 이상, 8:2와 12시간 이상이었다.

본 연구는 수생식물 경관선호도에 대한 평가를 통하여 수생식물 경관을 향상시킬 수 있는 방법을 구명(究明)하고자 중국 난창시의 대표적 도시습지공원 3곳을 대상으로 하여 현장평가와 AHP 평가를 진행하였다. 경관의 정량평가를 위하여 수생식물과 어우러진 경관에 대한 현장조사를 수행하였으며, 정성평가를 위하여 각 도시습지공원에 대한 이미지를 도출하고 이에 대한 선호성 평가를 수행하였다. 연구를 통해 얻은 주요 결과를 정리하면 다음과 같다. 첫째, 기존 수생식물경관 평가에 관한 선행연구에서 얻어진 총 25개 경관요인에 대한 요인분석 결과, 생물종 다양성, 전체환경의 조화성, 관상 특성의 다양성, 생활유형 다양성, 서식지의 조화성, 건강상태(활력도), 계절다양성, 식물경관의 접근성 그리고 식물과 경관의 조화성 등 총 9개 요인을 선정하였다. 둘째, 9개 요인에 대한 AHP 평가 결과, 생물종 다양성, 관상특성의 다양성, 식물과 전체환경의 조화성 등 3개 요인의 가중치는 각각 0.315, 0.147, 0.153으로 전체의 61.5%를 차지하였다. 도출된 요인은 중국 내 습지공원은 물론 수생식물 경관선호도 향상을 위해 우선적으로 고려해야 할 인자로 부상되었다. 셋째, 9개 정량 및 정성평가 요인에 대한 가중치분석 결과, 각 공원별 평가점수는 위저우완(0.42) > 샹후(0.35) > 아이시후(0.23)의 순으로 나타났는데, 특히 위저우완의 경우 다양한 수심으로 종다양성이 높고 접근성이 좋아 친수공간으로의 높은 활용성이 평가에 반영된 결과라 판단된다.

In order to improve the implementation of safety and health education at the site for industrial accident prevention activities, research was conducted to minimize inconvenience and increase utilization by redesigning and developing existing education methods. To date, occupational safety and health education has been conducted without considering the general work characteristics and functional facilities (mechanical, electrical, instrumentation, chemical) of workers (mechanical: turbine, valve, pump, hydraulic system, electrical: generator, breaker, motor, etc.). In particular, plant facilities were classified as mechanical and electrical facilities to improve the methodology for industrial safety and health education for plant maintenance workers. In addition, the “One Page Education Plan” was announced as a learning case because the spread of COVID-19 infectious diseases made it impossible to reduce or control the number of people in all groups and groups. The improvement of this training method will play a major role in improving the effectiveness of safety education in power plant workplaces.

In korea, 500MW standard coal fired power plants were designed and operated for the initial base load, so facility stability was prioritized from facility problem to treatment, but now we needed to research for minimizing greehouse gas emissions at the operation of coal fired power plants. research on various facilities and technologies was actively conducted to reduce environment pollutants was drastically reduced, but research and attempts on coping measures in the event of a reduction facility problem were in sufficient. this study considered investigated ways to minimized pollutants by quickly responding to logic development and application of the load runback concept in case of serious problems with environmental pollutant reduction facilities such as NOx reduction selective catalytic reduction facilities, SOx reduction wet flue gas desulpherisation facilities, and TSP(Total Suspended Particles) collection low temperature electric precipitator.

본 연구에서는, 5가지 식물의 메탄올 추출물을 이용하여 모기기피 효과 실험을 진행하고 누드 쥐를 모델로 하여 흰줄숲모기에 대한 모기기 피제의 유효용량 및 유효시간을 평가하였다. 그리고 식물의 휘발성분을 GC-MS로 분석하였다. 유효용량은 개박하가 10, 50, 100, 200 μg/mL 에서 72.9, 83.7, 86.4, 97.3%의 효율로 가장 높았다. 누드 쥐를 대상으로 한 유효시간 연구에서는 5가지 식물의 메탄올 추출물 중 개박하, 개다 래 및 개똥쑥이 90.5%로, 30분까지만 지속하였다. 각 식물의 휘발성분을 분석한 결과, 애플민트 28개 성분, 개다래 19개 성분, 개똥쑥 27개 성분, 개박하 26개 성분, 민들레 19개 성분이 확인 되었다. 특히 모기기피제의 유효 성분으로 알려진 네페탈락톤(nepetalactone)이 개박하의 휘발성분 중 한 성분으로 확인 되었다(27.95 mg/Kg). 본 연구결과는 다양한 휘발성분을 함유한 식물을 이용한 모기기피제 재료로서 가능성을 제시한다.

Once a radioactive material is released from the nuclear power plant (NPP) by accident, it is necessary to understand the behavior of radioactive plume to protect residents adequately. For this, it is essential to measure the radiation dose rate around NPPs at important locations. Our previous study developed a movable radiation detector that can be installed quickly in an accident to measure gamma dose rate in areas where environmental radiation monitoring system is not installed. The data measured by the detector are transmitted to the server in real-time through LoRA wireless communications. There are two methods to use LoRA communications; one is self-network, and the other is the network provided by the mobile carrier. A signal receiver, called a gateway, should be equipped near the installation location of radiation detectors to use a self-network without using the mobile carrier’s system. In other words, the movable radiation detectors we made can function if there should be any gateway near them. The distance capable of communication between gateway and detector is about 8 km in an open area without significant obstacles. Korea has many significant obstacles, such as mountains around most NPPs. Thus, the gateways could be installed in the proper position before the accident to operate the movable radiation detectors without problems. If the gateway is located at a high position like a mountain top, it could cover a wide area. In this study, the elevation database in the area around the NPPs was collected and analyzed to determine where gateways should be installed. The analysis range is limited in the urgent protective action planning zone. The optimization was also performed to minimize the number of gateways.

Considering the characteristics of nuclear power plants in order to decommission nuclear power plants safely and economically, this thesis provides a methodology for optimizing the technology for developing decommissioning characteristic evaluation system using simulation technology for core facilities of the plants based on 3D that reflects various factors. The results of pollution assessment and radiation assessment for the Kori Unit 1 reactor building, auxiliary building, and each major device are displayed in 3D drawings and viewer, and the radiation dose rate and radiation assessment results are displayed separately for each major location. Furthermore, this D/B development method which includes inserting result values of characteristic evaluation and the quantity of waste is one of the main technology to optimize the system which enables users to select decommissioning processes and predict the quantity of waste. (Refer to the presented 3D models of the containment building, D/B, tag search module, the scale calculation result of models after visualizing the result value of 3D based decommissioning characteristic evaluation) The methodology for optimizing decommissioning characteristic evaluation result value DB development system using 3D models of the first major nuclear power plant allows the display of decommissioning characteristic values in virtual reality, the selection of decommissioning process, the establishment of the decommissioning procedure. Hence, this study is expected to provide reliable guidelines for managing a decommission business efficiently in the near future and can be used in the related field if needed.

The Kori Unit 1 and Wolsong Units 1, commercial reactors in South Korea, were permanently shut down due to the expiration of their design lifetime. Therefore, nuclear power plants that have been permanently shut down must be dismantled, and the site must be finally released after removing the remaining radionuclides. Domestic regulatory standards for site remediation should not exceed 0.1 mSv per year based on effective dose. In addition, it is necessary to calculate the preliminary Derived Concentration Guideline Levels (DCGL) to prove that the conditions are met. Therefore, in this study, the input factor considering the geological characteristics of the site of Kori Unit 1 was investigated, and the preliminary Derived Concentration Guideline Levels were calculated and compared with the results of previous studies. As a result of comparative analysis, 60Co, 134Cs, and 137Cs, which are gamma-ray emitting radionuclides, had similar values to DCGL of previous studies A and B. However, 63Ni, a beta-rayemitting nuclide, was 5.94×104 Bq·g−1 in this study and 8.47×101 Bq·g−1in previous study B, resulting in a difference of about 700 times. In addition, in the case of 90Sr, this study and previous study A were derived similarly, but this study was 5.34×101 Bq·g−1 and previous study B was 1.18×10−1 Bq·g−1, resulting in a difference of about 450 times. This difference is judged to be because, unlike this study using only the industrial worker scenario, in the case of previous study B, the resident farmer scenario was mixed and used, which considers the internal exposure caused by ingestion of food produced in the contaminated area. In this study, it was confirmed that DCGL according to the change of geological factors of the site did not have a significant effect on gamma-ray-emitting nuclides. However, it was confirmed that considering the intake of food affects the DCGL of beta-ray-emitting nuclides. Therefore, there is a need to conduct future studies applying intake input factors that meet domestic conditions.

Currently, dismantling technology for decommissioning nuclear power plants is being developed around the world. This study describes the cutting technology and one of the technologies being considered for the RV/RVI cutting of Kori Unit 1. The dismantling technology for nuclear power plants include mechanical and thermal methods. Mechanical cutting methods include milling, drill saw, and wire cutting. The advantages of the mechanical method are less generating aerosol and less performance degradation in water. However, the cutting speed is slow and the reaction force is large. Thermal cutting methods use heat sources such as plasma arcs, oxygen, and lasers. The advantages of thermal method are fast cutting speed, low reaction force and thick material cutting. On the other hand, they have problems with fume and melt. Among them, the cutability of the oxygen cutting method is better in carbon steel than in stainless steel. In order to cut the RV/RVI of the Kori Unit 1, the applicability of fine plasma, arc saw, and band/ wheel saw is being reviewed. For RV cutting, the applicability of arc saw and oxy-propane is being considered Because RV is mostly made of carbon steel. However, since the flange is cladded with stainless steel, the use of mechanical methods such as wire saws should be considered. In the case of RVI, since it has a complicated shape and is made of stainless steel, it seems necessary to review various cutting methods. In addition, it will be necessary to minimize radiation exposure of workers by cutting underwater cutting.

The decommissioning of nuclear power plant (NPP) generates large amount of waste. Since the most of the concretes are slightly surface contaminated, the accurate characterization and regionspecific surface decontamination are important for the efficient waste management. After the effective surface decontamination and separation, most of the concrete waste from decommissioning of NPP can be classified as a clearance waste. Various surface characterization and decontamination technologies are suggested. The mechanical technologies are simple and offers direct application. The laser-based technologies offer efficient separation and surface contamination. The high price, however, hesitates the application of the process. The nitro-jet technology, which is based on the evaporation of liquid nitrogen, allows the effective decontamination. However, the high price and uncertainty of large are application hinders the practical application in NPP decommissioning. In this paper, various technologies for characterization, handling, treatment, etc., will be discussed. The advantages and disadvantages of the technologies will be discussed, in terms of practical applications.

The Fukushima nuclear power plant accident, which was caused by the Great East Japan Earthquake on March 11, 2011, is of great concern to the Korean people. The scope of interest is wide and diverse, from the nuclear accident itself and the damage situation, to the current situation in Fukushima Prefecture and Japan, and to the safety of Japanese agricultural and fishery products. Concerns about nuclear safety following the Fukushima nuclear accident have a significant impact on neighboring nation’s energy policy. It has been 11 years since the Fukushima nuclear accident. In neighboring nation society, the nature and extent of damage caused by the Fukushima nuclear accident, the feasibility of follow-up measures at home and abroad, the impact on neighboring nations, and the direction of nuclear policy reflecting the lessons of the accident are hotly debated topics. Recently, the controversy has grown further as it is intertwined with Japan’s concerns about the safety and discharge of the contaminated water into the sea, and conflicts over domestic nuclear power policies. About 1.29 million tons, as of March 24, 2022, of the contaminated water are generated, which is close to the 1.37 million tons of water storage capacity. In response, the Japanese government announced on April 13, 2021, that it plans to discharge the contaminated water into the sea from 2023. This study evaluates the amount of the contaminated water that has passed through the ALPS and reviews the preparations and related facilities for ocean discharge after diluting the contaminated water. In addition, it is intended to forecast the various impacts of ocean discharge.