Spent nuclear fuels should be safely stored until being disposed and dry storage system is predominantly used to retain the fuels. Thermal analysis to estimate temperatures of spent nuclear fuel and the storage system should be performed to evaluate whether the temperatures exceed safety limit. Recently, thermal hydraulic analysis with CFD codes is widely used to investigate the temperature of spent nuclear fuel in dry storage. COBRA-SFS is a legacy code based on subchannel analysis code, and its fidelity is verified for evaluating the thermal analysis for licensing a dry cask system. Herein, thermal analysis result based on CFD and COBRA-SFS codes is compared and the Dry Cask Simulator (DCS) is assessed as a benchmark experiment in this study. Extended Storage Collaborating Program (ESCP) led by the Electric Power Research Institute (EPRI) is organized to address the degradation effects of spent nuclear fuel during long-term dry storage, and DCS is the first phase of the program. The dry storage system, containing a single BWR assembly in a canister, was designed to produce validation-quality data for thermal analysis model. ANSYS FLUENT was used to simulate DCS. Simulations were conducted in various decay heat and helium pressure inside the canister. In realistic conditions of decay heat and helium pressure of actual dry cask system, CFD and COBRA-SFS analysis results gave good agreement with experimental measurement. Peak temperatures of channel can, basket, canister and shell predicted by CFD simulation also showed good prediction and the discrepancies were less than 7 K while measurements uncertainty was 7 K. In high decay heat and high pressure condition, however, CFD and COBRA-SFS underestimated peak cladding temperature than experimental results.

After the decision of the Wolsong unit 1 permanent shutdown (2019), spent fuel stored in the spent fuel bay (hereafter, SFB) should be transported to a dry storage facility (MACSTOR or Canister) in order to decommission Wolsong unit 1. Accordingly, KHNP has established a shipment schedule for damaged fuel of Wolsong Unit 1 and is trying to complete the shipment according to the schedule. Wolsong is equipped with transportation casks and dry storage facilities, but baskets need to be manufactured separately. In addition, license approval is required for baskets, transport cask, and dry storage facilities for legal grounds to contain, transport, and store damaged fuels. In this paper, the initial model, upgrade model, and automation model of encapsulation equipment planned to be introduced in Canada to handle PHWR’s damaged fuel were compared, and the optimal model was selected in consideration of KHNP’s planned spent fuel shipment schedule. The PHWR’s damaged fuel encapsulation system is a system developed the PHWR’s damaged spent fuel to be handled in the same way as the existing PHWR when storing it in the dry storage facility and loading a basket for capsulation into transport cask. At the Gentilly-2 nuclear power plant in Canada, a manually operated encapsulation system was used due to the low quantity of damaged fuel, which can be encapsulated two bundles a day, and this model is an initial model. In the case of Wolsong Unit 1, it has about 300 damaged fuels, so it takes about nine months to work when using the initial model. The upgrade model developed to improve work efficiency and reliability has increased work efficiency through some automation, but it would take about eight months to process the damaged spent fuels of Wolsong Unit 1, and this model has not yet been manufactured and applied. Lastly, the automation model changed the work location outside the SFB and automated drainage/drying operations. It is easy to maintain and replace consumables because the work is carried out by lifting the damaged fuel to a shuttle outside the SFB surrounded by a shielding chimney. Considering the reduction of drainage/drying time, it is possible to save about four times as much time as the initial model. That is, if the automation model is used, it is judged that the supply of Wolsong Unit 1 can be processed in about two months. However, in terms of license, initial model and upgrade model are expected to be easier and the period is expected to be shortened. However, if licensing is carried out as soon as equipment design is completed, it is believed that the period can be shortened by parallel equipment manufacturing and licensing. It is judged that the best way to comply with the target schedule is to select an automation model with excellent work performance, develop equipment, and proceed with licensing at the same time. Accordingly, KHNP is in the process of designing equipment with the aim of using the automation model to take out damaged fuel for Wolsong Unit 1.

This study aimed to suggest a suitable collar pattern by visually evaluating the appearance of the amount of collar drape by the starting position of the lapel line of a double-breasted tailored jacket using a 3d virtual fitting program. It created an avatar based on the mean size of women in their 20s (the 8th Size Korea) using clo network (double fastening: 10cm, collar width: 4.5cm, collar stand: 3cm, and lapel width: 8.5cm). The starting of the lapel twist line was waistline level, the 1/2 level of bustline and waistline, or bustline level, and collar laying amount was 4.5, 5.5, 6.5, or 7.5cm. It was evaluated by garment construction experts using 5, 6, and 4 items on the front, sides, and back, respectively. Descriptive statistics, F-test, Duncantest, and reliability analysis were conducted using SPSS 22. When collar laying amount was 6.5cm, it was best rated regardless of the starting point. Under waist line, when collar laying amount was 6.5cm, it was best rated regardless of the starting point. When collar laying amount was large, the collar’s outline length increased, resulting in unnecessary wrinkles from the neckline to the lapel, affecting the overall collar appearance. When collar laying amount was the smallest, the collar was lifted and the width was narrowed, exposing the seam connecting the collar and neckline. The length of the collar’s outline varied depending on collar laying amount, which was important to make the outline sit comfortably on the body.

Determining the size or area of a plant's leaves is an important factor in predicting plant growth and improving the productivity of indoor farms. In this study, we developed a convolutional neural network (CNN)-based model to accurately predict the length and width of lettuce leaves using photographs of the leaves. A callback function was applied to overcome data limitations and overfitting problems, and K-fold cross-validation was used to improve the generalization ability of the model. In addition, ImageDataGenerator function was used to increase the diversity of training data through data augmentation. To compare model performance, we evaluated pre-trained models such as VGG16, Resnet152, and NASNetMobile. As a result, NASNetMobile showed the highest performance, especially in width prediction, with an R_squared value of 0.9436, and RMSE of 0.5659. In length prediction, the R_squared value was 0.9537, and RMSE of 0.8713. The optimized model adopted the NASNetMobile architecture, the RMSprop optimization tool, the MSE loss functions, and the ELU activation functions. The training time of the model averaged 73 minutes per Epoch, and it took the model an average of 0.29 seconds to process a single lettuce leaf photo. In this study, we developed a CNN-based model to predict the leaf length and leaf width of plants in indoor farms, which is expected to enable rapid and accurate assessment of plant growth status by simply taking images. It is also expected to contribute to increasing the productivity and resource efficiency of farms by taking appropriate agricultural measures such as adjusting nutrient solution in real time.

본 연구에서는 강한 내열성을 가지는 비병원성 Bacillus atrophaeus, Bacillus subtilis, Geobacillus stearothermophilus 포자의 열 저항성을 분석하여 레토르트 식품 제조 시 직 접적인 멸균 여부 판정에 사용 가능성을 평가하고자 하였 다. B. subtilis 포자의 D121-value는 2.9±0.1분이었으며, Zvalue는 43.0±1.4oC로 나타났다. G. stearothermophilus 포 자의 D121-value는 4.3±0.1분이었으며, Z-value는 25.0±1.6oC 로 나타났다. B. atrophaeus 포자의 D121-value는 3.7±0.1분 이었으며, Z-value는 35.8±1.4oC로 나타났다. B. subtilis, G stearothermophilus와 B. atrophaeus 포자의 D121-value는 모 두 레토르트 식품 멸균 확인에 사용되는 C. botulinum 포 자의 D121-value 보다 높은 값을 나타내었다. 이러한 결과 를 종합하여 볼 때 레토르트 식품 멸균 시 병원성 포자형 성균인 C. botulinum 대신 B. subtilis, G. stearothermophilus, B. atrophaeus 포자를 사용할 수 있을 것으로 판단된다. 또 한 기존 세균발육 실험에 소요되는 13일보다 단시간인 2- 3일에 멸균 여부를 확인할 수 있을 것으로 판단된다.

본 연구는 야생조류 생물음향 탐지와 현장 조사의 결과 비교를 통해 효과적인 야생조류 조사 방법을 제시하는데 목적이 있다. 연구대상지는 제주 동백동산과 1100고지 습지였다. 생물음향 탐지 기간은 2020년 12개월간이었다. 생물음향 탐지는 시간당 1분씩, .wav, 44,100Hz 포맷으로 생물음향 측정장비(Song meter SM4)를 각 연구대상지에 설치하여 녹음하였다. 현장 조사는 Banjade et al. (2019)의 ｢제주 동백동산과 1100고지 습지의 조류군집 장기간 동향｣ 결과를 인용하였다. 연구결 과는 다음과 같다. 첫 번째, 생물음향 탐지 기법을 통해 확인된 조류상은 동백동산에서 29과 46종, 1100고지 습지에서 16과 25종이었다. 두 번째, 울음 빈도를 통해 나타난 종 구성은 동백동산에서 직박구리(33.62%), 섬휘파람새(12.13%), 동박새(9.77%) 순으로 나타났고, 1100고지 습지에서 큰부리까마귀(27.34%), 섬휘파람새(19.43%), 직박구리(16.56%) 순으 로 나타났다. 세 번째, 동백동산에서 실시한 현장 조사의 경우 2009년 39종, 2012년 51종, 2015년 35종, 2018년 45종이 조사되었고, 생물음향 탐지를 통해 46종이 확인되었다. 1100고지 습지에서 실시한 현장 조사의 경우 2009년 37종, 2012년 42종, 2015년 34종, 2018년 38종이 조사되었고, 생물음향 탐지를 통해 25종이 확인되었다. 종합적으로 현장 조사를 통해 동백동산에서 확인된 78종 중 43.6%인 34종, 1100고지 습지에서 확인된 47종 중 38.3%인 18종이 생물음향 탐지로 확인되었 다. 네 번째, 현장 조사에서 확인되지 않았지만, 생물음향 탐지를 통해 확인된 종은 동백동산에서 9과 12종, 1100고지 습지에서 3과 7종으로 대표적으로 소쩍새, 솔부엉이와 같은 야행성 조류, 쇠유리새, 울새와 같은 나그네새, 도래하는 개체수가 상대적으 로 적은 황여새, 솔잣새와 같은 겨울철새가 있다. 다섯 번째, 현장 조사에서 확인된 종 중에서 생물음향 탐지를 통해 확인되지 않은 종은 동백동산에서 18과 48종, 1100고지 습지에서 14과 27종으로 대표적으로 백로과, 수리과, 솔딱새과가 있다. 본 연구는 국내에서 생물음향 장비 운용을 통한 조류 연구가 활성화되고 있는 가운데 현장 조사와 생물음향 탐지를 병행했을 때 효과적인 조사를 실시할 수 있다는 기초 자료를 작성했다는 점에서 의미가 있다.

PURPOSES : The purpose of this study is to derive dropout rates according to various international roughness index (IRI) specifications using ProVAL, develop a comparative methodology, and indirectly assess the level of road management in each country. METHODS : Based on a literature review, the IRI specifications for each country were collected, and the ProVAL analysis tool was used to compare and analyze dropout rates according to each specification. Thus, the dropout rate rankings for each country were calculated. Additionally, by analyzing the correlation between dropout rates according to each threshold, a model was created to convert the threshold between the most commonly used baseline distances of 100 m and 161 m. RESULTS : Dropout rates were derived according to the standards of each country and rankings were assigned. Comparing 51 standards, the IRI level of New Mexico appeared to be the highest, whereas the domestic specifications ranked 36th. A model was created to convert the threshold between the standard distances of 100 m and 161 m. CONCLUSIONS : This study objectively assessed the roughness standards in various countries using the dropout rate and IRI ranking specifications. The highest specification was found for the asphalt of New Mexico in the USA, with the domestic specification ranking 36th. A model that converts the thresholds between the most commonly used baseline distances of 100 m and 161 m was developed, with slight differences across sections. For a precise conversion, individual models may be required for each section.

본 연구는 주변 환경의 차이에 따른 화분매개곤충의 유입 특성을 파악하기 위하여 국립수목원 내 진화속을걷 는정원과 부추속전문전시원에 식재된 울릉산마늘의 화분매개곤충을 조사하였다. 2023년 5월 22일부터 6월 2일 까지 꽃이 70% 이상 개화하였을 때 포충망을 활용하여 8일간 곤충을 채집하였고, 각 전시원 별 식생(피도), 기후 (온도·습도·조도)를 조사하였다. 조사 결과 진화속을걷는정원에서 피도 60% 온도 26.4℃, 습도 31.5%, 조도 40953.6lx, 화분매개곤충 20과 450개체, 부추속전문전시원은 피도 90%, 온도 25.6℃, 습도 31.6%, 조도 6387lx, 화분매개곤충 15과 196개체로 나타났다. 온도와 조도가 상대적으로 높은 진화속을걷는정원이 채집된 곤충의 다양성과 방문 빈도가 높았다. 시간대별 곤충의 방문 빈도를 비교해본 결과 온도와 조도는 개체수가 증가할 때 같이 증가하는 경향을 보였으며, 습도는 반대의 경향을 보였다.

경상북도에 위치한 산림유전자원보호구역내 2개 지역(영주지역의 신갈나무, 울진지역의 소나무)과 경기 포 천시에 위치한 생물권보전지역내 2개 지역(포천지역의 신갈나무와 소나무)에서 2016년부터 2017년까지 함정 트랩(Pitfall trap)을 매년 5회씩 5반복하여 각각 비교하였다. 그 결과 산림유전자원보호구역에서는 27과 106속 160종 2,665개체가 확인되었으며, 종풍부도는 20.28, 종균등도는 0.266, 종다양도는 1.355, 우점도는 0.265로 우점 종은 납작먼지벌레속 sp.2 (Synuchus sp.2)이였다. 또한, 생물권보존지역에서는 16과 49속 77종 4,834개체가 확 인되었으며, 종풍부도는 8.958, 종균등도는 0.301, 종다양도는 1.31, 우점도는 0.669로 우점종은 윤납작먼지벌레 (Synuchus nitidus)였다. 산림의 중요 지역 간에 지표성 딱정벌레의 군집을 비교함으로써 환경변화에 따른 산림 보존 프로그램을 수행하는데 유용한 기초 자료로 활용될 것이다.

Fruit Flies (Diptera: Tephritidae) are polyphagous, highly invasive pests in which female adults lay eggs under the skin of fruit and larvae damage the fruit. Among them, the Oriental Fruit Fly, Bactrocera dorsalis (Hendel) was first reported in Taiwan and is distributed throughout much of Southeast Asia, including Vietnam, as well as on the African continent and in the Pacific region. In order to prevent the introduction of pests into country, the Animal and Plant Quarantine Agency has designated them as prohibited pests and is conducting surveillance and investigation on their occurrence. The experimental countries were Taiwan and Vietnam, and statistical analysis was conducted based on the number of B. dorsalis caught by setting up traps for about 8 months. Methly eugenol (ME; 4-allyl-1,2-dimethoxy-benzene) is a widely distributed natural plant and is used because it strongly attracts males of B. dorsalis. The experiments aimed to verify the effect of attractant formulations (liquid, solid, wax) and traps (Delta trap, Lynfield trap, Steiner trap) on B. dorsalis.

The fall armyworm (FAW), Spodoptera frugiperda, is an invasive pest species in Africa and Asia, which is native to the Western hemisphere. Invaded FAW was corn feeding strain. We study the developmental and biology of the corn strain FAW on the rice plants compare the result with corn feeding up to F2- generation. The development periods of F0, F1 and F2 generations of the rice-fed colony were 21.7%, 18.3% and 18.9% longer than corn-fed colony. The rice-fed colony was significantly lower in the body weight of larvae and pupae, and pre-adult survival rate and the fecundity than corn-fed colony. Our results showed that the corn strain FAW can survive and complete its life cycle by feeding rice plants up to several generations under laboratory condition, but their development and fecundity were reduced in comparison to the corn feeding colony. However, this study suggests potential impact of invaded FAW to the infestation of rice fields in Asian countries.

Ceriagrion nipponicum (Odonata: Coenagrionidae) is listed as climate-sensitive indicator species in Korea and now expands its range northward. In this study, we sequenced complete mitochondrial genome (mitogenome) of the species collected from South Korea for comparatively analysis in damselflies and to detect the genes suitable for subsequent population genetic study. Comparison of the mitogenomes from two geographic samples of C. nipponicum showed the highest variation in ND4 and ND1, whereas no variation was detected in COI, warranting usefulness of the two genes for subsequent population-level study. Phylogenetic analysis using 13 PCGs and 2 rRNAs in Zygoptera showed non-monophyletic Coenagrionidae, forming two groups.

The Asian longhorned tick, Haemaphysalis longicornis, is an ectoparasite of domestic and wild animals, which transmit various pathogens including Severe Fever with Thrombocytopenia Syndrome Virus (SFTSV). They are the predominant hard tick species in Republic of Korea (ROK) and widely distributed throughout ROK. It is known that H. longicornis produce their offspring via two reproductive strategies, bisexual and parthenogenesis. It might affect their population maintenance and vectorial capacity. Parthenogenesis H. longicornis had the insertion of two thymine ‘T’ in mitochondrial 16s rDNA. In this study, we analyzed the proportion of bisexual and parthenogenesis H. longicornis in ROK including thirteen cities: Goseong[GS], Sokcho[SC], Chuncheon[CC], Ganghwa[GH], Samcheok[SCH], Sangju[SJ], Boryeong[BR], Ulsan[US], Gochang[GC], Jinju[JNJ], Jindo[JD], Jeju[JJ], and Seogwipo[SG]. Parthenogenesis individuals predominated from the northeastern are of ROK including Goseong, Sokcho, Chuncheon, Ganghwa, Samcheok, Sangju, Ulsan, and Jinju. Whereas bisexual individuals predominated from the southwestern area in ROK including Boryeong, Gochang, Jindo, Jeju, and Seogwipo. The analysis of haplotype diversity using concatenated sequences of mitochondrial Cytochrome c oxidase subunit I (COI) and Cytochrome B (CytB) revealed that H. longicornis were grouped into two major haplotypes. Two major haplotypes were correlated with bisexual and parthenogenesis, respectively. Likewise, H. longicornis individuals were divided into two clades and each clade were indicated by bisexual and parthenogenesis. The current study provides us an understanding of the genetic characteristics of two reproductive strategies for H. longicornis, which will be led to expand knowledge of the life cycle and population maintaining for H. longicornis.

Background: Choosing to perform squats on an unstable surface potentially offers advantages surpassing those of their stable counterpart. Objectives: The purpose of this study was to compare muscle activation during squats on stable and unstable surfaces and investigate the relationship among thigh muscles. Design: Observational study. Methods: Nineteen adults participated in this study. The stable surface consisted of a flat floor. The unstable surface involved the use of an air cushion. An air cushion was positioned beneath each foot of the study participants. Surface electromyography was employed to measure muscle activation. %MVC was calculated by measuring muscle activation during squat execution and manual muscle testing. Results: The comparison of muscle activation during squats between stable and unstable surfaces revealed a significant difference in the rectus femoris and biceps femoris (P<.05). On stable surfaces, positive correlations were observed in the rectus femoris, vastus lateralis, and vastus medialis (P<.05). On unstable surfaces, positive correlations were found between the rectus femoris and vastus medialis (P<.05). Conclusion: This study observed an increase in muscle activation of the rectus femoris and biceps femoris during squats on an unstable support surface compared to a stable support surface.