검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 1,063

        86.
        2022.03 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        One disadvantage of deep cycle flooded lead-acid batteries is increasing water loss caused by use of (+) Pb-Sb / () Pb-Sb alloy grid. Water loss is generated by the emission of hydrogen gas from the () electrode during battery charging. In this paper, we maintain cycle life aspect through the development of hybrid flooded lead-acid batteries to which a (+) Pb- Sb / () Pb-Ca grid is applied and deal with the improvement of water loss. The amount of water loss compared to that of the () Pb-Sb grid decreased when Ca was added to the () Pb grid. For the () Pb-Ca grid, it was confirmed that the time to reach 0.0 V, at which water decomposition occurs, was increased compared to that of the () Pb-Sb grid at the NPV (Negative Potential Voltage). In the cycle life test conducted with the BCI (Battery Council International) standard, compared to the (+) Pb-Ca grid, the (+) Pb-Sb grid increased the life cycle of the batteries and the (+) Pb-Ca grid showed an early end of life due to PbO corrosion layer generation, as determined through SEM / EDS and Tear Down analysis. In conclusion, by addition of Sb to (+) Pb grid and Ca to () Pb grid, we developed a hybrid flooded lead-acid battery that meets user requirements to improve water loss characteristics and preserve cycle life characteristics.
        4,000원
        87.
        2022.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The planting date of corn for silage has been delayed because of spring drought and double cropping system in Korea. This experiment was conducted to evaluate agronomic characteristics, forage production and feed value of corn at April and May in 2019. Experimental design was a split-plot with three replications. Planting dates (12 April and 10 May) were designated to the main plot, and corn hybrids (‘P0928’, ‘P1543’ and ‘P2088’) to the subplot. The silking days of the early planting date (12 April) was 79 days and that of the late planting date (10 May) was 66 days (p<0.0001), however, there were no significant differences among the corn hybrids. Ear height of the late planting date was higher than that of the early planting (p<0.05), while there were no significant differences in plant height of corn. Insect resistance at the early planting was lower than that of late planting (p<0.05), however, lodging resistance was no significant difference at planting date. The rice black streaked virus (RBSDV) infection of early planting was 3.7% and that of late planting was 0.3% (p<0.001). Dry matter (DM) contents of stover, ear and whole plant had significant difference at planting date (p<0.05). And differences in ear percentages were observed among the corn hybrids (p<0.01). And ear percentages of early maturing corn (‘P0928’) was higher than for other hybrids. Ear percentage at the early planting date was higher than that at the late planting date (p<0.01). DM and total digestible nutrients (TDN) yields had significant difference at planting date, however, there were no significant differences among the corn hybrids. DM and TDN yields at the late planting (21,678 kg/ha and 14,878 kg/ha) were higher than those of the early planting (13,732 kg/ha and 9,830 kg/ha). Crude protein content at the early planting date was higher than that of the late planting. Acid detergent fiber content of the late planting was lower than that of the early planting date (p<0.01), while there were no significant neutral detergent fiber content difference among the corn tested. Calculated net energy for lactation (NEL) and TDN at the early planting were higher than those of at the late planting (p<0.01). Results of this our study indicate that the late planting date (May) is better than early planting date (April) in forage yield and feed value of corn. Therefore, the delay of planting date by May was more suitable for use in cropping system.
        4,000원
        88.
        2022.02 KCI 등재후보 구독 인증기관 무료, 개인회원 유료
        나도풍란의 경우 교배 후 화분이 발아하여 화분관 신장이 이루어지고 화분관은 수분 후 5-7일경 배주원기에 도착하였다. 어린배주 발달은 수정 후에야 비로소 진행되며 수분 후 14 일경에는 배주의 원기가 둥근 돌기형태이고 34일경에는 filament형태로 길어지며 Megaspore Mother cell 모습이 나타났다. 수분 후 40-50일 사이 배낭을 갖춘 성숙된 배주가 형성된다. 배주가 수정준비상태가 될 때까지 화분관 신장은 계속 활발히 진행되어 배주 주위를 완전 히 둘러싸고 있는 것으로 나타났다. 수분 후 54일경 화분관이 배낭을 침투하여 수정하는 모습이 관찰되었으며 보통 수정은 54에서 64일 사이에 일어나는 것으로 파악되었다. 수정 후 접합자세포는 가로로 한번 분열하여 윗부분의 작은 세포와 밑부분의 큰 세포로 나뉘어 지며 윗부분의 세포는 proembryo로 발달하며 밑부분의 세포는 다시 세로로 분열하여 두개 의 세포로 나뉘어지고 계속 분열하여 영양분을 공급하는 suspensor로 발달한다. 수분 후 110 일 경 배와 16개의 다리를 가진 suspensor가 부착 되어 있는 배 발달 양상이 관찰되었다. Proembryo는 계속 분열하여 140일경 종자로 성숙하는 것으로 나타났다. 나도풍란과 호접란 속간잡종을 얻기 위해 수분 후 발달하는 시기별로 꼬투리를 채취하여 인공배지에 발아시킨 결과, 수분 후 56일 이전의 배주로는 발아가 힘들었고 발아가능시점은 수분 후 69일로 분 석되었다.
        6,600원
        89.
        2022.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 순수 PEBAX® 분리막의 투과특성을 향상시키기 위해 개질된 fumed silica 나노입자를 혼합한 MMMs (mixed matrix membranes) 타입의 PEBAX®/fumed silica 하이브리드 분리막을 제조하고, 이산화탄소와 메탄의 투과 특성을 측정하였다. PEBAX®-1657/TS-530 하이브리드 소재의 경우, FT-IR과 XRD 분석을 통해 PEBAX® 고분자에 무기입자 가 비교적 잘 분산되었음을 확인하였다. 기체투과특성 측정 결과 TS-530을 10 wt% 혼합한 분리막의 경우, 순수 PEBAX® 분 리막과 비교하여 투과도 계수는 약간 감소하나 이상분리인자는 약간 증가하였다. 이는 비투과성 silica 입자의 도입에 따라 기 체 확산 경로가 줄어들고, 경로의 비틀림이 증가하기 때문으로 볼 수 있다. TS-530 함량이 증가함에 따라서는 투과도 계수와 이상분리인자 간에 전형적인 trade-off 경향을 보였다. 이는 TS-530 함량이 증가함에 따라 결정성이 감소하고, 고분자 사슬 간 충전 억제에 따라 자유부피가 증가하기 때문으로 볼 수 있다. 또한 무기입자 함량 증가에 나노간극의 형성 가능성이 높아지 고, 이에 따라 기체 확산도가 커지기 때문으로 판단된다.
        4,000원
        90.
        2022.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, to verify the structural performance of the Composite Joint System (CJS) hybrid structural model, a cyclic load test was performed and evaluated and verified through the test. To verify the structural performance of the CJS hybrid structural systems’ joint and evaluate the seismic performance, four three-dimensional real-size specimens were developed with three internal beam-column specimens and one external beam-column specimen. The three interior column specimens were classified by different methods of joining the upper column and lower column, and the same bonding method as the primary specimen was used for the exterior column. The structural performances in terms of drift, strength, and energy dissipation capacity were analyzed and compared based on the experimental results. From the displacement-based loading experiment, all specimens showed a lateral drift of 4.0% without any significant strength drop and stable energy dissipation capacity.
        4,200원
        91.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The clear-water phase (CWP) is a notable limnological phenomenon in freshwater systems caused by predatory interactions between large filter-feeding zooplankton and phytoplankton. However, the mechanisms and factors that influence the extent of CWP, particularly in complex water systems with both fluvial and lacustrine characteristics, remain poorly understood. The present study evaluated CWP occurrence patterns at different sites in a large reservoir located in a temperate monsoon region (Lake Paldang, Korea); the relationships among factors associated with CWP occurrence, such as transparency, zooplankton diversity, and chlorophyll a concentration were investigated. Transparency exhibited significant correlations with precipitation and retention time, as well as the relative abundance of zooplankton (p<0.01), suggesting that a change in the retention time due to precipitation can alter CWP. Data collected before and after CWP occurrence were analyzed using paired t-test to determine variations in CWP occurrence based on the water system characteristics. The results demonstrated that various factors were associated with CWP occurrence in the fluvial-type and lacustrine-type sites. The correlation between zooplankton biomass and transparency was stronger in the lacustrine-type sites than in the fluvial-type sites. The lacustrine-type sites, where cladoceran emergence is common and is associated with long retention times, favored CWP occurrence. The results suggest that lacustrine-type sites, which are conducive to zooplankton development and have relatively long retention times, enhance CWP occurrence. Furthermore, CWP occurrence was notable in spring, and the present study revealed that site-specific CWP could occur throughout the year, regardless of the season.
        4,300원
        92.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In Nepal, about 73% of the vegetable production area is estimated to be covered by hybrid varieties. Most of the hybrid seeds in vegetable crops are imported from abroad. Considering the demand for hybrid vegetable varieties, the National Horticulture Research Centre (NHRC), Khumaltar, Lalitpur has started hybrid breeding of vegetables using a conventional approach since the fiscal year 2003/04. With this effort, the tomato hybrid ‘Srijana’ was developed and registered in 2010. This variety was estimated to cover about 35% of the total tomato cultivated area. Two tomato hybrids, namely ‘Khumal Hybrid Tomato-2 (HRA14 × HRD7) and ‘Khumal Hybrid Tomato-3’ (HRA20 × HRD2), showed good performance and were released in the National Seed Board in 2021. It was found that the heterosis for the yield was 87% in ‘Khumal Hybrid Tomato-2’ and 95% in ‘Khumal Hybrid Tomato-3’ with a potential yield of 70 MT/ha and 60 MT/ha, respectively, under open field conditions. Similarly, a comparative study of 7 tomato hybrids at different research stations was carried out and it showed that F1 (HRA13 × HRD7) could be a potential hybrid for the western region with a potential productivity of 116.8 MT/ha under a protected cultivation system. Hybrid breeding of cucumber was also initiated in the fiscal year 2007/08. A total of 12 crosses in cucumber were performed and two hybrids F1 (HRDCUC004 x RDCUC001), 107 MT/ha and F1 (HRDCUC009 × HRDCUC003) 150 MT/ha were found promising. Hybrid breeding in brinjal, hot pepper and bitter gourd has also been started. Furthermore, key problems and way forward to strengthen hybrid vegetable breeding in Nepal were also discussed.
        4,000원
        93.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        농촌진흥청 국립원예특작과학원에서는 2018년 오리엔탈-트럼펫(OT) 종간잡종나리 ‘Pink Bella’를 개발하였다. 2008년 연노란색 OT 종간잡종나리 ‘Valparadiso’와 붉은색의 오리엔탈나리 ‘Scalini’를 각각 모본과 부본으로 화주 절단 수분법과 주 두교배법으로 각 3화를 인공교배하였고, 교배 후 미숙한 3개의 꼬투리를 수확하여 배가 형성된 배주를 기내에서 배양하여 잡종을 획득한 후 재배하였다. 육묘한 배양묘로부터 2011년 분홍색의 OT 종간잡종 나리 ‘OTO-11-43’ 계통을 개체 선발하였다. 2012년부터 2017년까지 선발된 계통은 자구와 인편번식, 조직배양을 이용하여 번식 및 양구한 후 1, 2차 생육특성 검정을 실시하였다. 2018년 3차 생육특성검정 및 소비자 기호도 평가를 수행한 결과 화색 및 화형에 대한 기호도가 높은 분홍색(RHS, RP62C)의 조기개화성 절화용 OT 종간잡종 나리 ‘Pink Bella’를 육성하였다. 3배체의 OT 종간잡종 나리로 초장은 131.7cm로 초장신장성이 우수하였다. ‘Pink Bella’의 화폭은 18.6cm이며 대조품종 ‘Table Dance’의 18.4cm와 유사한 크기였으며, 내화피의 폭, 길이 역시 대조품종과 통계적인 차이가 없었다. ‘Pink Bella’의 개화기는 6월 15일로 대조품종 ‘Table Dance’의 6월 28일에 비교하여 개화기가 13일 단축된 것으로 나타났으며 통계적으로 유의하였다.
        4,000원
        94.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 낮은 막 저항을 가지는 알칼리 수전해 시스템 적용을 위한 격리막 제조를 위하여 PPS (Polyphenylene sulfide)를 지지체로 사용하고 Polysulfone과 무기물 첨가제를 이용하여 격리막을 제조한 뒤, 지지체의 두께와 다공도에 대한 영향을 분석하였다. 지지체로 사용된 PPS 펠트를 온도(100°C, 150°C, 200°C)와 압력(1톤, 2톤, 3톤, 5톤)의 변수를 두어 압축을 진행 하여 두께를 조절하고자 하였으며, 무기입자로서 친수성이 높고 내알칼리성이 뛰어난 BaTiO3와 ZrO2를 사용하여 polysulfone과 함께 슬러리를 제조하고 압축한 PPS 펠트 위에 캐스팅하여 다공성 격리막을 제조할 수 있었다. 전자주사현미경(SEM)을 통해 압축 조건에 따른 분리막의 모폴로지 변화를 확인하고, 기공도를 계산하였으며, 압축 조건이 증가할수록 두께와 기공도가 감소하는 경향을 확인하였다. 수전해용 격리막으로서 사용이 가능한지를 확인하기 위하여 다양한 특성 평가를 진행하였다. 기계적강도를 측정한 결과 압축 조건(온도와 압력)이 증가할수록 인장강도가 점차 증가하는 경향을 확인하였다. 최종적으로 내알칼리성 테스트 를 통하여 제조한 다공성 격리막이 우수한 내알칼리성을 가지는 것을 확인하였고, I-V 테스트를 통하여 100°C와 150°C 조건에서 압축된 막들이 기존의 압축하지 않은 막보다 낮은 전압을 가지며 성능이 향상되었다는 것을 확인하였다.
        4,500원
        95.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        1. 열대아시아지역에 적응하는 수출용 일대잡종 벼 품종을 육성할 목적으로 2013년에 미얀마에서 수집한 도열병과 흰잎 마름병에 저항성인 ‘MY1B’를 국제미작연구소(IRRI)에서 육성 된 일대잡종 벼 웅성불임친인 ’IR68897A’에 4회 여교배하여 2016년에 불임친인 ‘KR1A’와 유지친인 ‘KR1B’를 육성하였으며 육성된 불임친 ‘KR1A’를 회복친유전자를 가진 우량계통들과 검정교배한 결과 베트남 지역 적응성이 높고 도정특성이 우수한 OM052와 교배한 조합이 우수하여 교배번호 KR0695H을 부여한 후 생산력 검정에 필요한 F1종자를 생산하였고 선발된 일대잡종 벼 계통에 대해 2년간의 지역적응시 험을 통해 우수성이 인정되어 2019년 농촌진흥청 직무육성 신 품종선정위원회에서 신품종으로 선정되면서 ‘KGHR1’으로 명명되었음 2. ‘KGHR1’의 F1 종자생산을 위해 육성된 불임친과 유지친, 회복친의 농업형질을 조사한 결과 불임친인 ‘KR1A’의 임실율이 0%인 완전불임을 보였고 불임친인 ‘KR1A’과 유지친인 ‘KR1B’을 1% potassium iodide-iodine(I-KI)에 염색해 본 결과 ‘KR1A’는 염색이 되지 않은 완전불임을 나타내어 일대잡종벼의 특성에 부합되었음 3. ‘KGHR1’는 중부평야지 보통기 재배에서 평균 출수기가 8월 13일로 대비품종 ‘다산’보다 5일 늦은 중생종이었고 간장은 103 cm로 다산의 82 cm보다 21 cm 큰 장간이고, 이삭길이는 28 cm로 ‘다산’ 보다 길고 이삭당 벼알수는 202개로 ‘다산’ 보다 69개 많았고 등숙비율은 76.3%로 대비품종 ‘다산’ 83.7% 보다 낮게 조사되었음 4. ‘KGHR1’는 도열병과 줄무늬잎마름병에 저항성이었고 흰 잎마름병은 K1, K2, K3 균계에 저항성을 보였지만, 오갈병 및 멸구류에 대한 저항성은 없었으며 도복에는 강하며, 수발 아와 내냉성은 ‘다산’과 비슷한 수준을 보였음 5. ‘KGHR1’의 입형은 현미장폭비가 3.37로 장원립이고 백미외관은 심복백이 0/1로 맑고 투명하였으며 단백질함량은 6.3%로 ‘다산’ 보다 낮은 반면 아밀로스함량은 22.7%로 ‘다산’ 보다 높았음 6. ‘KGHR1’의 제현율과 현백률은 대비품종 ‘다산’과 차이가 없었고 완전미도정수율은 40.5%로 ‘다산’ 보다 낮았으나 베트남 현지 일대잡종 벼 품종인 IIA838 보다 높았음 7. ‘KGHR1’의 쌀수량은 ‘수원’ 등 3개 지역에서 실시한 지역적응시험 보통기 보비재배 평균 6.60 MT/ha로 ‘다산’의 6.59 MT/ha와 차이가 없는 수량성을 보였고 수원에서 3년간 실시한 생산력 검정에서는 ‘다산’ 보다 23% 증수하였으며 특히 2019년에 7.59 MT/ha로 베트남 대조품종인 IIA838 보다 도 11% 증수하였으나 베트남 하이하우에서 2018년에서 2019 년까지 2년간 2작기씩 현지 관행재배로 4회 실시한 생산력검 정시험에서는 8.25 MT/ha로 대조품종인 IIA838 보다 12% 떨어지는 수량을 나타내었음 8. ‘KGHR1’는 국내 종자산업 육성과 수출경쟁력을 높이기 위해 2014년부터 수행한 골든시드프로젝트(Golden Seed Project, GSP)의 결과로 개발된 첫 번째 일대잡종 벼 품종으로 우리나라 벼 종자수출산업의 발전을 위한 밑거름이 될 것임
        4,000원
        96.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        목적 : 본 연구는 여가 및 사회참여를 위해 수 ․ 전동휠체어를 사용해본 휠체어 사용 장애인들을 대상으로 포커스그룹인터뷰를 수행하여 사용자 경험을 파악하고, 수 ․ 전동휠체어 개발 시 고려해야 할 요소와 임상가의 수 ․ 전동휠체어 처방을 위한 기초자료를 제시하고자 한다. 연구방법 : 본 연구는 수ㆍ전동휠체어를 사용해본 휠체어 사용 장애인 5명을 대상으로 정성적 연구방법인 포커스그룹인터뷰를 실시하였다. 질문은 Krueger와 Casey가 제시한 질문방식을 기반으로 하였으며, 현장메모, 녹음된 자료를 3명의 저자가 독립적으로 전사하여 Braun과 Clarke’s가 제시한 절차에 따라 분석하였다. 결과 : 참여자들은 수ㆍ전동휠체어를 사용하여 지역사회 내에서 직업, 여가 그리고 해외 활동 등 다양한 활동을 수행하고 있으며, 수ㆍ전동휠체어는 전동휠체어와 비교하여 무게가 가볍고, 크기가 작아 차량 탑재 시 용이하기 때문에 선택되었다. 하지만 휠체어 사용자들은 휠체어의 추진 구조물, 지지 구조물 그리고 소재 등에 문제점을 보고하였다. 참여자들은 경험한 수ㆍ전동휠체어의 문제점 개선과 함께 외형 디자인의 개선을 기대했고, 추가적으로 안전한 주행을 위해 가슴벨트나 넘어짐 방지 바퀴와 같은 부속품을 포함해야 한다는 의견도 있었다. 이처럼 적극적인 여가참여를 수행하기 위해 수ㆍ전동휠체어의 안전성에 대한 의견이 특히 강조되었다. 결론 : 본 연구는 여가 및 사회참여 활동 시 수ㆍ전동휠체어 사용자의 경험을 임상가 관점에서 파악하였 다. 향후 노인 및 휠체어 장애인을 위한 수ㆍ전동휠체어 개발 시 고려사항과 휠체어 사용자 평가 및 휠 체어 처방 시 임상가가 고려해야할 점을 제시하였으며, 실효성 높은 보조기기 개발을 위한 기초자료로 활용되길 기대한다.
        4,800원
        97.
        2021.11 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study was to investigate the improvement effect of biomarkers through the supply of natural diet in the juvenile hybrid abalone (Haliotis discus discus♀*H. madaka♂). For the study, the shell length of about 17 mm and the total weight of 0.83 g were used. The feeding conditions were set as the natural diet group (dried laver) and the formulated diet group, and the experiment duration was 16 weeks. The survival rate was about 14% higher in the natural diet group than the formulated diet group, and growth was also faster in the natural diet group. Shell malformation rate was lower in the natural diet group (7.5%) than the formulated diet group (21.5%). In the biochemical composition, except for carbohydrates, both experimental groups showed similar values. The degeneration of epithelial cells in the hepatopancreatic tubule was lower in the natural diet group than the formulated diet group, and the activity of basophilic cell was higher in the natural diet group. These results indicate that it is worth considering the supply of natural diet for the breeding of juvenile hybrid abalone and the improvement of the quality of the formulated diet (H. discus discus♀*H. madaka♂).
        4,000원
        1 2 3 4 5