본 연구에서 생력화가 가능하면서 친환경적인 재배법을 개발하고자 병, 상자를 이용하여 표고의 배양특성 및 버섯 생산성을 확인하기 위해 수행되었다. 병과 봉지는 각 각 1.2 kg의 혼합배지를, 상자는 7 kg의 혼합배지를 넣어 표고 종균을 접종하여 배양한 결과, 20±1oC의 배양실에서 모든 처리구의 배지온도는 배양 14일째 최대치에 도달하다 그 이후 낮아지며 유지되는 경향이었다. 재배용기별 배양기간은 봉지와 병이 30일, 상자는 39일로 나타났고, 갈변기간은 상자가 42일로 병과 봉지가 각각 51일, 60일 보다 짧았다. 1주기 재배기간은 병이 89일, 상자가 90-97 일, 봉지가 99일로 나타났다. 재배용기별 버섯 발이수는 상자 27개, 봉지 7.7개, 병 2.3개 순으로 생산성에도 영향을 끼쳐 상자가 1,253kg, 봉지 199.7, 병 144.0g으로 나타 났다. 건조 배지중량 대비 신선버섯 발생비율은 상자가 39.4%, 봉지 35.8%, 병 26.4% 순으로 상자의 생물학적 효율이 가장 우수하였다. 따라서 상자재배는 갈변기간의 단축과 버섯 수량성에서 봉지재배에 비해 유리한 장점이 있어 친환경 생력화 재배법 개발 가능성을 보여주었다.

This research was conducted to figure out the optimal size of the plug cell and seedling raising period in ‘Nongwoo’ and ‘Nonghyeop’ cultivars. In the first experiment on effect of plug cell size on growth of squash, seedlings were transplanted into hydroponic cultivation beds at different growing stages: Those in 32-cell trays with 3-4 true leaves at 25 days after sowing, those in 50-cell trays with 2 true leaves at 15 days after sowing, those in 105-cell trays just before a true leaf development, and those in 162-cell trays with only cotyledons at 8 days after sowing. In the second experiment on effect of seedling raising period on growth of squash, it was conducted to have different sowing dates. But the same transplanting date, based on the results of Experiment 1, and compared the differences in growth and fruit productivity as affected by plug cell size in the same way with experiment 1 including the cultivars and environmental conditions. After setting the transplanting date in advance, the number of days for sowing were calculated back for each treatment. In the first experiment, plant height was the greatest in 105-cell trays followed by 162, 50 and 32-cell trays in both cultivars. The best fruit quality was found in different treatments depending on the cultivars, although it was the lowest in 32-cell trays in both cultivars. The fruit quality was not significantly different among those from cell sizes. Therefore, when raising seedlings in 105-cell trays, the period of raising seedlings can be shortened as compared with the conventional 32-cell trays, and this change could reduce the workforce required for growing and transplanting seedlings. In the second experiment, after transplanting, shoot height and leaf width in the first measurement in both cultivars were greater in the 32-cell treatment. However, the last measurement after four weeks showed no significant difference in plant height, but significantly greatest leaf width in the smallest cell treatment, even as compared with that in 32-cell treatment. In case of ‘Nongwoo’, length and weight of the first harvested fruit showed the highest values in the treatment of 105-cell trays. In case of ‘Nonghyeop’ the 162-cell treatment along with the 105-cell treatment showed greatest length and weight of the first fruits. From these results, zucchini plug seedlings can be raised in plug trays with reduced cell sizes than the conventional 32-cell trays with improved fruit productivity.

A two-year study was conducted from 2017 to 2018 by the establishment of a test field at Chungju-si and Cheongyang-gun. Plant height, number of leaves, insects and diseases, and fresh and dry matter yields for corn hybrid(‘Kwangpyeongok’) were investigated. Daily average, maximum, and minimum temperature, monthly average temperature, daily precipitation, and sunshine duration during the growing season were investigated. We selected climate-critical factors to corn productivity and conducted an evaluation of vulnerability to climate change from 1999 to 2018 for both regions. In 2018, the dry matter yield of forage corn was 6,475 and 7,511 kg/ha in Chungju and Cheongyang, respectively, which was half of that in 2017. The high temperature and drought phenomenon in the 2018 summer caused the corn yield to be low. As well as temperature, precipitation is an important climatic factor in corn production. As a result of climate impact vulnerability assessment, the vulnerability has increased recently compared to the past. It is anticipated that if the high temperature phenomenon and drought caused by climate change continues, a damage in corn production will occur.

지구 온난화에 따른 기온 상승, 보나 댐의 건설로 인한 체류시간의 변화는 식물플랑크톤의 이상증식을 일으키며 이로 인한 수계의 부영양화, 녹조 현상은 상수원 수질 악화에 영향을 미쳐 심각한 사회적 문제로 대두되고 있다. 본 연구와 같이 일차생산력과 환경요인들의 상관관계를 확인하는 것은 일차생산력의 조절인자 파악에 매우 효과적이다. 또한 HPLC-CHEMTAX 분석 방법은 간편하며 짧은 시간 안에 식물플랑크톤의 색소 비 값을 기반으로 각 군집의 상대적인 기여도 추정이 가능하다. 이러한 연구 방법들을 적용할 경우 수 생태 건강성 평가 및 식물플랑크톤 이상증식에 영향을 주는 군집조성을 빠르게 파악할 수 있어 조류 예보제 및 수계관리에 있어 효과적으로 활용될 수 있을 것으로 판단된다.

This study was conducted to investigate the effect of supplementary feeding levels on livestck and forage productivity and grazing intensity in Elk stags (Cervus canadensis). A fifteen 2-year-old Elk stags about 195 kg were randomly assigned to one of three dietary treatments (five animals per treatment). The dietary treatments consisted of a feeding concentrate of 1.0% of body weight (T1), 1.5% of body weight (T2) and 2.0% of body weight. Total dry matter intake (TDMI) was increased with increased with an increasing supplementary feeding levels. Average daily gain (ADG) were significantly increased with an increasing supplementary feeding levels (p<0.05) and reached a maximum on July and was lower in spring than autumn. The velvet antler production was no differences among treatment groups. Forage productivity of pasture and crude protein content were highest on May and decreased thereafter, however, crude fiber content was the reversed. The grazing intensity of Elk stags was increased in spring (38 to 59 head per ha) than summer and autumn (13 to 32 head per ha). The average grazing intensity of Elk stags ranged from 21 to 34 head per ha, which is affected by supplementary feeding levels. This result suggests that feeding supplementary diet at 1.5 % of body weight was needed to maintain the stable wight gain in antler growing periods and control the proper grazing intensity of Elk deer stags.

The aim of this study is to analyze the productivity change of pollock enterprise by applying a mutually quadratic hyperbolic model and a bootstrapping model. This study used 20 units of pollock firms data (from 2013 to 2017). As a result of total productivity analysis of twenty pollock enterprises, total factor productivity was estimated to have decreased by 24.9% over the last five years (2013~2017). The main cause of this productivity decline was analyzed by technical change. In terms of annual productivity change, it showed decrease 3.0% in 2013~2014, 7.8% in 2014~2015, 4.5% in 2015~2016 and 4.7% in 2016~2017 respectively. In the analysis of productivity by corporation type, total factor productivity showed a significant decrease in both general corporation and external corporation, and productivity decrease (-29.3%) was larger than general corporation (-23.0%). In the productivity analysis by type of business, total factor productivity decreased significantly in the order of wholesale and commodity brokerage (-26.3%), food manufacturing (-25.1%) and fisheries (-15.3%). This decrease in productivity was caused by the technological change which indicates a downward shift in the production curve that is significant in all sectors.

As the desires of market get various, so its demand fluctuates frequently. The only companies that flexibly meets fluctuating demands can survive in the fierce market competition. In this study, we deal with the development of jig system for manual welding processes that can cause flexible actions and uniform quality in the manufacturing shock absorber base assembly of automobile. For this we review the processes of design and development through analysis of the technology and the customer that are patents analysis, customer desires analysis, functional analysis and so on. Moreover, we review the relevant indicators for improvement of productivity that are production capacity, cycle time and error rates etc. as the technology is developed.

본 연구는 여름철 산란계의 더위 스트레스로 인한 생산성 저하에 영향을 미치는 열환경인자들 중 제어 요소를 결정하고 산란계의 생산성을 높일 수 있는 방안을 모색하기 위해 수행되었다. 경상남도에 위치한 산란계사에서 ISA Brown 품종의 산란계 48,451수를 공시하여 생산성 지표를 측정하였다. 또한 산란계사 내부에 온습도로거를 설치하여 건구온도와 상대습도를 여름이 시작되는 6월 19일부터 9월 7일까지 총 81일간 동안 측정하였다. 1일 평균온도, 1일 최고온도, 1일 최저온도, 1일 평균상대습도, 1일 최고상대습도, 1일 최저상대습도, 1일 평균THI, 1일 최고THI 그리고 1일 최저THI와 산란계의 생산성 지표 간의 상관관계를 분석하였다. 분석한 결과에 의하면, 1일 평균, 최고, 최저의 건구온도와 THI가 상승할수록 사료섭취량, 헨데이 산란율, 난중과 FCR은 낮아졌다(p<0.01). 반면, 음수량은 1일 평균, 최고, 최저의 건구온도와 THI가 상승할수록 증가하였다(p<0.001). 상대습도의 경우, 산란계의 생산성 지표에 대해 직접적인 상관관계를 가지지 않는 것으로 판단된다(p>0.05). 특이점으로는 폐사율의 경우, 1일 평균·최고 온도, THI와 1일 평균·최고·최저 상대습도와는 유의적인 상관관계를 가지지 않았지만, 1일 최저의 온도와 THI와는 상관관계를 갖는 것으로 분석되었다(p<0.05). 따라서, 여름철 산란계의 생산성을 향상시키기 위해서는 산란계사 내의 1일 평균, 최고, 최저의 건구온도와 THI를 가능한 낮추는 것이 필요하고, 특히 1일 최저온도를 산란계의 하한임계온도인 20℃에 근접하게 조성해주는 것이 유리 할 것으로 판단된다.

This experiment was carried out to study the change of productivity and feed value in different types of hilly pasture. The pasture utilized in the experiment was placed on the experimental farm of Pyeongchang Campus of Seoul National University. Forage production type(FP; Orchardgrass 18 + Tall Fescue 12 + Timothy 5 + White clover 5 kg/ha) and Public farm type(PF: Orchardgrass 12 + Tall Fescue 18 + Timothy 5 + White clover 5 kg/ha) pasture were established in September 3, 2014 and utilized (cutting or grazing) four times every year. Growth characteristics, yield and forage quality were investigated for two years. Plant height of grasses was the highest in the 1st cutting and legumes was in the 2nd cutting. Dry matter (DM) content was highest at every the 1st cut grasses significantly lower at the 2nd harvest (p<0.05). However, there was no significant difference in the 2nd, 3rd and 4th harvest in 2016. In the botanical composition change, the portion of legume was gradually increased after pasture establishment and the ratio of weed and bare land was higher at 2nd and 3rd cutting, but it was decreased at 4th harvest. There was no significant difference in 2016 of fresh yield between two farm types (p>0.05). The yield of dry matter showed similar trend of fresh yield and forage production type was higher than that of public farm type (p<0.05). The forage intake by livestock was 1,452 kg/ha in 2015 and 1,743 kg/ha in 2016. Pasture utilization ratio of public farm type pasture was highest in the 3rd grazing time. Forage quality of pasture in relation to management type had not significant difference, but there was difference in harvest times. Crude protein (CP) was the lowest in the 1st harvest and total digestible nutrient (TDN) was highest in the 1st harvest and lowest in the 4th harvest. Based on the above results, it is found that the establishment of pasture suitable for farm’s situation is important for set up of Korean model of hilly pasture. Although the forage production type is superior on forage productivity, it is recommended that the results will be provided as basic data for management of public farm type in the future.

This study was conducted to investigate the effect of seeding dates on grassland productivity and botanical composition in oversown pasture located in Cheonan of South Korea. Four treatment groups were established based on the seeding dates: 18th August, 1st September, 15th September and 29th September. Evaluation of seasonal changes in botanical composition of pasture showed that the highest ratios of grass in 18th August and 1st September (pasture species 93% and weeds 7%) and the lowest in 15th September (pasture species 75% and weeds 25%). In the plant length, there is no significantly different in 5% probability level. In the total dry matter yield of grass, 18th August (13,362 kg ha–1) and 1st September (13,988 kg ha–1) were higher than 15th September (11,883 kg ha-1) and 29th September (11,459 kg ha-1). The findings of the this study suggest that seeding by early September the most desirable results for botanical composition and grassland productivity in oversown pasture, Cheonan of South Korea.

This experiment was carried out to evaluate the characteristic and productivity of forage corn varieties sown at the last ten days of May at Cheonan of Korea on 2017 and 2018. Forage corn varieties sown on 24th May 2017 and 25th May 2018 were emerged in 5th and 1st June, respectively. Silking date of forage corns was different among varieties(p<0.05). Stem length of forage corns was not different among the varieties, except Kwangpyeongok(KPA) and Nero IT. Stem diameter of forage corns was not different amaong the varieties. Outbreak rate of black streaked dwarf virus was lower than 3% in all varieties. Total digestible nutrient(TDN) yield was different among corn varieties(p<0.05), which was higher in P32P75, followed by P2088, P31N27, and KPA. The TDN yield of varieties had direct correlation with stem length, stem diameter and ear yield, respectively(p<0.01). Average of TDN in all varieties was 69.8%. These results suggested that forage corn variety with late-seeding adaptability is more important for increasing the productivity of forage corn If harvesting of winter forage crops have to be finished in the middle ten days of May in middle region of Korea.

The diesel engine generate many pollutants such as PM(Particulate matter) and NOx(Nitrogen oxide). So the SCR(Selective catalytic reduction) must be required to meet the emission standard. The SCR catalyst market is growing rapidly, and the automobile markets using alternative energy sources are growing rapidly. This study deals with optimization of the calcination process the manufacturing process of SCR catalyst to be competitive. The calcination process is a bottleneck and it is required to optimize productivity and accept to be safety, But we cannot trade off anything in terms of safety. We applied DOE(Design of experiments) among many research methods performed in various fields. In order to achieve quality and productivity optimization. The dependent variables in the DOE were selected as NO Conversion(%). The independent variables were selected as the calcination temperature, soaking time and fan speed RPM. the CCD(Central composite designs) constructs response surface using the data onto experience and finds optimum levels within the fitted response surfaces. Our tests are our stability guarantee and efficient together with operation.