The research aimed to develop a high-efficiency plate-type heat exchanger for exhaust gas using computational fluid dynamics (CFD) thermal analysis based on the plate shape, and to identify the optimal shape. Following this, a water/air plate heat exchanger was manufactured, and its characteristics were studied experimentally. As the Re number increases on the gas (or air) side, the heat transfer rate increases significantly, whereas an increase in the Re number on the water side leads to a smaller increase in heat transfer. This is attributed to the larger convective heat resistance on the gas side, causing a substantial reduction in gas-side heat resistance as gas velocity increases, resulting in a considerable overall reduction in heat resistance. The fluid flow pressure drop showed similar results between the CFD calculations and experimental outcomes.

To produce super sweet corn sikhye, substituted for sweetener, the ratio of rice and super sweet corn was adjusted and processed with complex enzymes during saccharification, and their physicochemical and sensory properties were analyzed. The soluble solid content of the control and Corn-5 showed significantly high content at 13.50 °Brix, and the reducing sugar content of Corn-5 showed the highest content at 9.45%. The control showed the lowest free sugar content among all the experimental groups, excluding maltose content. In the enzyme-treated corn sikhye group, as the amount of super sweet corn increased, the content of sucrose decreased and the contents of glucose and fructose increased. The content of ascorbic acid and polyphenol compounds increased as the amount of super sweet corn increased. DPPH and ABTS radical scavenging abilities increased with increasing ratio of super sweet corn and enzyme treatment compared to the control. In the case of sensory evaluation, Corn-3, which substituted 30% of super sweet corn for rice and treated with enzymes, showed higher evaluations in taste, sweetness, and overall preference than those of the control.

This study aimed to explore sustainable fashion design plans and directions by analyzing Marine Serre’s collection. Previous research was reviewed to derive classifications of the aesthetic characteristics of sustainable fashion design. This classification was then used to analyze the characteristics of the Marine Serre collection. Design analysis was conducted on Marine Serre’s 2018 FW to 2023 SS collections. Marine Serre’s sustainability characteristics are functionality, surprise, handicraft, and inclusion. The results are as follows. First, functionality is the highest among the four characteristics and includes the functionality of movement, the functionality of form, and futurism. This characteristic was observed in the use of all-in-one body suits, pockets, and workwear, showing the will and values of designers who value daily activity. Second, surprise includes the scarcity of materials and the unexpectedness of composition. The value of the clothing is enhanced by the use of scarce materials not typically used in clothing. In addition, Marine Serre is highly regarded for expanding clothing into life by incorporating material upcycling into the theme of the collection. Third, handcrafted features include exaggerated decorations, logo, retro designs, and natural properties, and intentional utilization is differentiated. Marine Serre’s signature pattern suggests a suitable expression for the fabric to use the crescent moon for the season. Fourth, the collection expresses themes of inclusivity and cultural diversity. The results indicate that Marine Serre wants to contribute to a better future characterized by global coexistence.

Although interest in eco-friendly fashion products is increasing among scholars and industry leaders, the concept of eco-friendly products remains unclear, preventing consistent assessment of which fashion products are eco-friendly. This study conducted a content analysis of eco-friendly product information from 87 domestic and 102 foreign brands to reveal key standards for categorizing eco-friendly fashion products. Product characteristic information was coded according to the four material-based standards (i.e., organic material, regenerative material, alternative material, and sustainably produced/upcycled material). Consistency between coders was confirmed by Cohen’s kappa. In results, eco-friendly fashion products are categorized by four material-based standards and two certification standards (i.e., certified, not certified). Among the four material-based categories, the greatest number of domestic and foreign companies produced eco-friendly products that were classified as the regenerative material group. In addition, companies acquired eco-friendly certifications related to the use of organic, regenerative, and alternative materials. The greatest number of eco-friendly material brands used for eco-friendly fashion products belonged to the regenerative material group. Based on the study results, a typology of eco-friendly products was suggested. This typology can benefit practitioners and academics by highlighting a need for classification system for the eco-friendly fashion products, as well as by providing insight into the categorization of eco-friendly fashion products.

Fluorine-doped tin oxide (FTO) has been used as a representative transparent conductive oxide (TCO) in various optoelectronic applications, including light emitting diodes, solar cells, photo-detectors, and electrochromic devices. The FTO plays an important role in providing electron transfer between active layers and external circuits while maintaining high transmittance in the devices. Herein, we report the effects of substrate rotation speed on the electrical and optical properties of FTO films during ultrasonic spray pyrolysis deposition (USPD). The substrate rotation speeds were adjusted to 2, 6, 10, and 14 rpm. As the substrate rotation speed increased from 2 to 14 rpm, the FTO films exhibited different film morphologies, including crystallite size, surface roughness, crystal texture, and film thickness. This FTO film engineering can be attributed to the variable nucleation and growth behaviors of FTO crystallites according to substrate rotation speeds during USPD. Among the FTO films with different substrate rotation speeds, the FTO film fabricated at 6 rpm showed the best optimized TCO characteristics when considering both electrical (sheet resistance of 13.73 Ω/□) and optical (average transmittance of 86.76 % at 400~700 nm) properties with a figure of merit (0.018 Ω-1).

High-Manganese (Mn) austenitic steel, with over 24 wt% Mn content, offers outstanding mechanical properties in cryogenic settings, making it a potential replacement for existing cryogenic materials. This high manganese steel exhibits high strength, ductility, and wear resistance, making it promising for applications like LNG tanks, flanges, and valves. To operate in cryogenic environments, hot forging and heat treatment processes are vital, especially in flange production. The cooling rate during high-temperature cooling after hot forging plays a critical role in influencing the microstructure and mechanical properties of high manganese steel. The rate at which cooling occurs during this process influences the size of the grains and the distribution of manganese and consequently has an impact on mechanical properties. This study assessed the microstructure and mechanical properties based on different cooling rates during the hot forging of High-Mn steel flanges. Comparing air and water cooling after hot forging, followed by heat treatment, revealed notable differences in grain size. These differences directly impacted mechanical properties such as tensile strength, hardness, and Charpy impact property. Understanding these effects is crucial for optimizing the performance and reliability of High-Mn steel in cryogenic applications.

Al2O3 has excellent sintering properties and is important in semiconductor manufacturing processes that require high-temperature resistance and chemical inertness in a plasma environment. In this study, a comprehensive analysis of the chemical characteristics, physical properties, crystal structure, and dispersion stability of three commercially available Al2O3 powders was conducted. The aim was to provide a technological foundation for selecting and utilizing appropriate Al2O3 powders in practical applications. All powders exhibited α-Al2O3 as the main phase, with the presence of beta-phase Na2O-11Al2O3 as the secondary phase. The highest Na+ ion leaching was observed in the aqueous slurry state due to the presence of the secondary phase. Although the average particle size difference among the three powders was not significant, distinct differences in particle size distribution were observed. ALG-1SH showed a broad particle size distribution, P162 exhibited a bimodal distribution, and AES-11 displayed a uniform unimodal distribution. Highconcentration Al2O3 slurries showed differences in viscosity due to ion release when no dispersant was added, affecting the electrical double-layer thickness. Polycarboxylate was found to effectively enhance the dispersion stability of all three powders. In the dispersion stability analysis, ALG-1SH exhibited the slowest sedimentation tendency, as evidenced by the low TSI value, while P162 showed faster precipitation, influenced by the particle size distribution.

Recently, in newly constructed apartment buildings, the exterior wall structures have been characterized by thinness, having various openings, and a significantly low reinforcement ratio. In this study, a nonlinear finite element analysis was performed to investigate the crack damage characteristics of the exterior wall structure. The limited analysis models for a 10-story exterior wall were constructed based on the prototype apartment building, and nonlinear static analysis (push-over analysis) was performed. Based on the finite element (FE) analysis model, the parametric study was conducted to investigate the effects of various design parameters on the strength and crack width of the exterior walls. As the parameters, the vertical reinforcement ratio and horizontal reinforcement ratio of the wall, as well as the uniformly distributed longitudinal reinforcement ratio and shear reinforcement ratio of the connection beam, were addressed. The analysis results showed that the strength and deformation capacity of the prototype exterior walls were limited by the failure of the connection beam prior to the flexural yielding of the walls. Thus, the increase of wall reinforcement limitedly affected the failure modes, peak strengths, and crack damages. On the other hand, when the reinforcement ratio of the connection beams was increased, the peak strength was increased due to the increase in the load-carrying capacity of the connection beams. Further, the crack damage index decreased as the reinforcement ratio of the connection beam increased. In particular, it was more effective to increase the uniformly distributed longitudinal reinforcement ratio in the connection beams to decrease the crack damage of the coupling beams, regardless of the type of the prototype exterior walls.

In this study, a numerical analysis study was conducted on the flow characteristics according to the internal flow path change and differential pressure of the hydrogen shut-off valve, and through this, the pressure loss characteristics and flow coefficient of the hydrogen shut-off valve were predicted. ANSYS CFX program was used to predict the flow characteristics of the hydrogen shut-off valve. When the flow path gap was 1.3 mm, the design conditions of the hydrogen shut-off valve were satisfied, and the value of the flow coefficient of the valve was about 1.53. As the inlet pressure of the hydrogen shut-off valve increases, the outlet flow rate increases, but regardless of the inlet pressure, the flow coefficient of the valve is almost constant, ranging from 1.53 to 1.56, indicating that it is the inherent flow coefficient of the designed hydrogen shut-off valve.

The heat transfer characteristics of double-pipe spiral heat exchanger were investigated by various curvature sizes, experimentally. The three different sizes of heat exchanger were made and tested with water as a working fluid to analyze the heat transfer characteristics. The heat transfer rates, overall heat transfer coefficient and pressure drop were analyzed with various heat exchanger sizes (i.e., curvature ratios). As result, the heat transfer rate increased with increasing the size of the heat exchanger as the flow rate increased due to increasing the area size of heat transfer. However, the overall heat transfer coefficient and pressure drop increased with decreasing the heat exchanger size (i.e., increased curvature ratio) due to the enhanced centrifugal force and inertia.

In this study, we examined the effect of orifice diameter on atomization performance such as SMD(Sauter Mean Diameter), MMD(Mass median diameter), particle size distribution, spray distance, and spray angle when water was sprayed through a siphon nozzle. In addition, the behavior characteristics of spray were analyzed using the CFD(Computational Fluid Dynamics) commercial program. In the downstream direction of the flow, the dispersion and diffusion power of the droplets increased, greatly improving atomization performance. The spray spread in the radial direction when the jet velocity of water increased. As a result, atomization performance improved as the jet velocity increased.

Air blower has been widely used in many industrial fields such as wind tunnel and large ventilation systems. Its performance is affected by operating conditions and system geometry of inpeller and duct, and these design parameter optimization is essential for the effective development. CFD analysis is carried out to investigate the air flow field characteristics with outlet total pressure in a blower system. Intake air into the impeller blade through the inlet is compressed, and then gradually discharged from the outlet with ascending total pressure, and predicted results are compared with test data. Especially this overall pressure difference in the blower system severely depends on the flow rate. These results are expected to be used as applicable design data for blower performance improvement.

Since ships are exposed to noise and vibration for a long time in seas isolated from land, the stress of workers is high, requiring studies on the improvement of the problem. In addition, the health of crew members on fishing vessels, unlike commercial ships, carrying out fishing activities is closely related to fishing performance. However, considering that most of IMO's guidelines apply to merchant ships, provisions should be made for vibration in accommodation areas of fishing vessels. Accordingly, this study, applying the revised ISO 20283-5:2016 standard and through experiment, investigated the vibration characteristics of the accommodation area for each operating conditions of a 1000-ton trawler fishing vessel. Within the scope of the study and the full-ahead mode, the vibration was highest in the engine control room (4.17mm/s) while the acceptable standard was satisfied sufficiently in all conditions. Application of the merchant vessel vibration standard to fishing vessel is expected to improve the working environment of fishing vessel crew members.

항만 내 선박과 부두의 사고를 예방하기 위하여 통항 및 접안 안전성 평가를 통하여 안전한 부두가 건설되어 관리하고 있으나, 선 박의 접안 및 계류 과정에서 선박이 부두에 충돌하거나 로프로 인한 인명사고의 발생 등 예측할 수 없는 사고들이 종종 발생한다. 자동계류장 치는 선박의 신속하고 안전한 계류를 위한 자동화된 시스템으로 로봇 매니퓰레이터와 흡착 패드로 구성된 탈/부착 메커니즘을 가지고 있다. 본 논문은 자동계류장치의 흡착 패드의 위치 및 속도제어에 필요한 선체와의 변위 및 속도 측정 시스템을 다룬다. 자동계류장치에 적합한 측 정 시스템을 설계하기 위하여, 본 논문은 우선 센서의 성능 및 실외 환경적 특성 분석을 수행한다. 다음으로 이러한 분석 결과를 토대로 실외 부두환경에서 설치되는 자동계류장치에 적합한 변위 및 속도 측정시스템의 구성 및 설계 방법에 대해 기술한다. 또한 센서의 측정상태 감지 및 속도 추정을 위한 알고리즘을 제시한다. 제안된 방법은 다양한 속도 구간에서의 변위 및 속도 측정 실험을 통해 그 유용성을 검증한다.

The tribology characteristics of the graphene coated PA6 were evaluated with scratch experiments. As a result, the following conclusions were obtained. The PA6 of the graphene coating shows a 0.1 improvement in friction coefficient and a lower abrasion depth than PA6 in the variable pressure-type scratch experiments. PA6 of the graphene coating showed a lower friction coefficient of 0.2 or more than PA6 in the friction coefficient in the static pressure scratch experiments, indicating that wear resistance was improved. In both the variable and the static pressure type scratch experiments, the tip depth of graphene-coated PA6 shows a thinner wear depth than PA6, showing the effect of graphene. The graphene content showed excellent tribology characteristics at 3%, and there was no difference in tribology characteristics at higher contents.

해상풍은 대기-해양의 상호작용을 이해하는데 중요한 요소일 뿐만 아니라, 해양에서 기인하는 위험기상을 예측하는데 중요한 입력자료이다. 정확한 예측을 위해서는 정확한 해상풍 자료가 요구되지만, 육상과 달리 해상은 관측이 제한적이기 때문에 관측 자료가 많 지 않은 실정이다. 따라서 본 연구에서는 장기간의 고해상도 해상풍 자료 구축을 목표로 하였다. 먼저 장기간에 대해 활용 가능한 ERA5 재분석 바람장을 고해상도로 재격자화 하였고, 재격자화 한 ERA5 바람장을 수치모형 ADCIRC (ADvanced CIRCulation model)의 GAHM (Generalized Asymmetric Holland Model)을 이용하여 산출한 비대칭형 태풍 바람장과 합성하였다. 산출된 비대칭형 태풍 합성 바람장은 기상 청 (Korea Meteorological Administration, KMA) 및 일본 기상청 (Japan Meteorological Administration, JMA) 관측자료를 이용하여 정확도를 평가 하였다. 평가결과, ERA5 바람장 및 Holland 식을 이용하여 산출한 대칭형 태풍 합성 바람장보다 비대칭형 태풍 합성 바람장이 관측값을 매우 유사하게 재현하는 것으로 나타났다. 본 연구에서 생산한 해상풍 자료는 향후 폭풍해일 후측 자료 구축, 폭풍해일고 빈도 분석, 해상 풍 빈도 분석 등 다양한 연구의 기초자료로 유용하게 활용될 것으로 기대된다.

To understand the spatiotemporal distribution pattern of zooplankton and the environmental factors influencing zooplankton abundance in Gomso Bay, major harvesting area of Manila clam (Venerupis philippinarum) in South Korea, zooplankton sampling was conducted four times in autumn (October 2022), winter (January 2023), early spring (March 2023), and spring (May 2023). Among the environmental factors of Gomso Bay, water temperature, chlorophyll a concentration (Chl-a), dissolved oxygen (DO), and pH observed different patterns, while salinity and suspended particulate matter (SPM) showed no significant statistical differences between the survey periods. The zooplankton in Gomso Bay occurred 33, 29, 27, and 29 taxonomic groups during each respective survey period. In October 2022 and May 2023, arthropod plankton were dominated, while in January and March 2023, protozoa were primarily dominant. Among the Arthropods, copepods including Acartia hongi, Paracalanus parvus s. l., Corycaeus spp., and Oithona spp. commonly found along Korean coastal areas of the Yellow Sea, were dominated. Cluster analysis based on zooplankton abundance indicated a single community (stable condition) in each season, attributed to low dissimilarity distances, while three distinct clusters (autumn, winter-early spring, spring) between seasons indicated a highly seasonal environment in Gomso Bay.

The aim of this study was to determine the quality characteristics of bread with 2%, 4%, 6%, and 8% cuttlefish ink added. The pH of the dough decreased as the addition percentage increased, and the addition of 8% was the lowest. The pH of the bread and the fermentation expansion power of the dough decreased as the addition percentage increased. Moisture and ash content were positively correlated with the addition percentage, and the crude protein and crude ash content were negatively correlated. As the addition percentage increased, the color of the bread became darker, and the bread volume decreased. The inside and outside color of the bread also decreased as the addition percentage increased. The volume and specific volume of bread decreased as the addition percentage increased. The amino acid analysis indicated glutamic acid was the largest, free amino acid analysis pointed out aspartic acid the highest. The springiness, cohesiveness, gumminess, brittleness, and hardness of the bread were positively correlated with the addition percentage. Overall, it seems possible to develop bakery items using cuttlefish ink as a functional ingredient.

In zinc-air batteries, the gel polymer electrolyte (GPE) is an important factor for improving performance. The rigid physical properties of polyvinyl alcohol reduce ionic conductivity, which degrades the performance of the batteries. Zinc acetate is an effective additive that can increase ionic conductivity by weakening the bonding structure of polyvinyl alcohol. In this study, polymer electrolytes were prepared by mixing polyvinyl alcohol and zinc acetate dihydride. The material properties of the prepared polymer electrolytes were analyzed by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Also, Electrochemical impedance spectroscopy was used to calculate ionic conductivity. The electrolyte resistances of GPE, 0.2 GPE, 0.4 GPE, and 0.6 GPE were 0.394, 0.338, 0.290, and 0.213 Ω, respectively. In addition, 0.6 GPE delivered 0.023 S/cm high ionic conductivity. Among all of the polymer electrolytes tested, 0.6 GPE showed enhanced cycle life performance and the highest specific discharge capacity of 11.73 mAh/cm2 at 10 mA. These results verified that 0.6 GPE improves the performance of zinc-air batteries.

This study conducted an investigation into the effects of fruit type and cultivation practices (organic and conventional) on soil characteristics and soil arthropod communities within apple, blueberry, grape, peach, and pear orchards. The collection of soil arthropod communities was achieved through the utilization of pitfall traps, with concurrent measurements taken for soil moisture content, electrical conductivity, and temperature. The findings of this study unveiled substantial impacts attributed to fruit type and cultivation practices on soil characteristics. Specifically, within organic apple orchards, discernibly higher levels of soil moisture content, electrical conductivity, and temperature were observed when compared to their conventional counterparts. The investigation into soil arthropod communities yielded a total of 1,527 individuals, classified in to five phyla and 15 orders. The range of abundance, species richness, and diversity indices varied across conventional and organic orchards. Cultivation practices were found not to exert a significant influence on soil arthropod community characteristics. However, Non-metric Multidimensional Scaling (NMDS) analysis indicated a significant differentiation in soil arthropod community structure based on cultivation practices. This study underscores the importance of considering vegetation structure and environmental characteristics that may influence soil arthropod communities comprehensively when assessing the impact of cultivation practices on soil arthropods. Furthermore, it emphasizes the need to account for both the characteristics and structure of soil arthropod communities in understanding the implications of cultivation practices on these organisms.