PURPOSES : The purpose of this paper is to evaluate the performance of MAST composite pavement. METHODS : A Testbed with three different sections with varying pavement materials were constructed: Section 1 (MAST(Multi-Layered Asphalt Surface Treatment) Composite Pavement; RCC(Roller Compacted Concrete)+Modified DBST(Double Bituminous Surface Treatment), Section 2 (Aggregate base+Modified DBST), and Section 3 (aggregate base+General DBST). The structural stability and skid resistance were evaluated using LFWD test and sand patch test, respectively. Moreover, laboratory specimens of four different pavement materials (HMA(Hot Mix Asphalt), Gravel base+DBST, RCC+DBST, and RCC+Modified DBST) were fabricated using and the rutting resistance of each pavement type was evaluated using the MMLS3. RESULTS : As a result of the LFWD(Light Falling Weight Deflectometer) test, the elastic modulus of Section 1 was significantly higher compared to the other section with values between 450 MPa to 650 MPa. Meanwhile, the elastic modulus of Section 2 and Section 3 were almost similar from 50 MPa to 150 MPa. Moreover, sand patch test results showed that Section 1 and Section 2 have an excellent surface roughness with values higher than 0.7 mm but Section 3 has a poor surface roughness with MTD(Mean Texture Depth) value of 0.4 mm. Lastly, based on the results of the MMLS3(third scale Model Mobile Load Simulator) test, gravel base+DBST showed the lowest resistance to rutting among the four specimens, and both RCC+modified DBST and RCC+DBST showed good performance up to 600 loading cycles, but the rut depth increased rapidly until 1,000 loading cycles. CONCLUSIONS : MAST composite pavement(RCC+modified DBST) has superior structural stability compared to general DBST pavement (aggregate base+DBST), has excellent skid resistance with values higher than 0.7 mm, and has similar rutting resistance to that of general dense asphalt concrete pavement. Therefore, exhibiting its good performance in both structural and functional aspects, it can be concluded that MAST composite pavement(RCC+modified DBST) can be an effective alternative for pavement material in Southeast Asian developing countries where support for heavy vehicle loads is required and rutting is likely to occur.

PURPOSES : In this study, the basis for improving the maintenance method of road pavement in Jeju Island, where deterioration is accelerating, was presented through field construction and analysis of various combinations of maintenance methods. METHODS : Construction was performed on Jeju Island's Aejo Road, which has high traffic and frequent early damage, using various asphalt mixtures mainly applied in Jeju Island, with different maintenance cross-sections depending on the level of repair. The quality and performance of the asphalt mixture collected during construction were evaluated, and MEPDG was used to analyze the service life according to the type and maintenance level of the mixture. RESULTS : While the mixture for the surface layer satisfied the quality standards and had excellent rutting and moisture resistance performance, the asphalt mixture for the intermediate and base layer did not satisfy the quality standards such as air voids, so it was judged that quality control was necessary during production. The section repaired to the base layer was found to be advantageous for the integrated behavior of the pavement and had the best structural integrity. As a result of predicting the service life, the estimated life of the section where only the surface layer was repaired was analyzed to be approximately 7 years, the section where the intermediate layer was repaired was 14.5 years, and the section where the entire section up to the base layer was repaired was analyzed to be 18 years. CONCLUSIONS : In Jeju Island, where deterioration is accelerating, it was analyzed that when establishing a maintenance plan, it is necessary to consider repairing the middle and base floors in order to secure the designed life of 10 years.

PURPOSES : The purpose of this study is to provide basic data to improve the service life of asphalt pavement using basalt aggregate in Jeju Island by evaluating the performance of asphalt pavement through analysis of material and structural aspects. METHODS : To evaluate the performance of Jeju Island's asphalt pavement, cracks, permanent deformation, and longitudinal roughness were analyzed for the Aejo-ro road, which has high traffic and frequent premature damage. Cores were collected from Aejo-ro sections in good condition and damaged condition, and the physical properties of each layer were compared and analyzed. In addition, plate cores were collected from two sections with severe damage and the cause of pavement damage was analyzed in detail. RESULTS : About 45% of the collected cores suffered damage such as layer separation and damage to the lower layer. The asphalt content of surface layer in the damaged section was found to be 1.1% lower on average than that in the good condition section, and the mix gradations generally satisfied the standards. The density difference between the cores of each layer was found to be quite large, and the air voids was found to be at a high level. CONCLUSIONS : Test results on the cores showed that, considering the high absorption ratio of basalt aggregate, the asphalt content was generally low, and the high air voids of the pavement was believed to have had a significant impact on damage. High air voids in asphalt pavement can be caused by poor mixture itself, poor construction management, or a combination of the two factors. Additionally, the separation of each layer is believed to be the cause of premature failure of asphalt pavement.

This study aimed to investigate the effect of Liriope platyphylla and organic acids on enteric methane mitigation in goats using an open-circuit simplified respiration chamber system. Methane recovery was evaluated by injecting 3% standard methane gas for 30 min at 3 L/min. The percentage of methane recovery from the four chambers was 99±5.4%. Following the recovery test, an animal experiment was conducted using eight castrated Boer goats (body weight 46.6±7.77 kg) using a 2×2 crossover design. Experimental diets were as follows: 1) Control (CON), commercial concentrate and tall fescue, and 2) Treatment (MIX), concentrate supplemented with L. platyphylla and organic acids and tall fescue. Goats were offered feed at 2% of body weight (dry matter basis) in equal portions twice daily at 8:00 and 15:30. The goats were adapted to the feed and methane chamber for 10 and 3 days, respectively. Methane emission was measured one day per goat using tunable diode laser absorption spectroscopy, and temperature and airflow measurements were used to estimate methane emissions. Dry matter intake (DMI), body weight, and methane emission were measured during each period. Methane production with CON and MIX was 24.48 and 22.68 g/d, respectively, and 26.81 and 24.83 g/kg DMI, respectively. Although the differences were not significant, the use of supplements resulted in a numerical reduction in methane in MIX compared with CON. Collaboration with experts in other areas, including various engineering departments, is imperative to measure methane emissions using a chamber system accurately.

PURPOSES : The number of snowfall and the amount of snowfall are gradually increasing, and due to the characteristics of Seoul, which has a lot of traffic, it is difficult to respond quickly with a snow removal method that relies on snow removal vehicles. Therefore, it is necessary to develop an IoT based eco-friendly snow removal system that can respond to unexpected heavy snow in winter. In this study, the low temperature operation and snow removal performance of the IoT road condition snow removal detector and the snow removal system using CNT and PCM are evaluated in the climatic environment chamber. METHODS : To make artificial snow, it consists of an climatic environment chamber that can simulate a low temperature environment and equipment that can supply compressed air and cold water. Depending on the usage characteristics of the climatic environment chamber, use an air-water type snow maker. In order to make artificial snow, wet temperature, which takes into account the actual air temperature and the amount of moisture in the air, acts as the most important variable and is suitable for making snow, below –1.5 ℃. The lower the water temperature, the easier it is to freeze, so the water source was continuously supplied at 0 ℃ to 4 ℃. One of the two different pipes is connected to the water tank to supply water, and the other pipe is connected to the compressor to supply high-pressure air. Water is dispersed by compressed air in the form of many small droplets. The sprayed microscopic water particles freeze quickly in the low temperature environmental climatic chamber air and naturally fall to the floor, forming snow. Based on the KS C IEC 60068-2-1 cold resistance test standard, an integrated environmental test procedure was prepared to apply to IoT-based snow removal systems and performance evaluation was performed accordingly. The IoT based eco-friendly snow removal system is needed to in winter, so visual check and inspect the operation at the climatic chamber before setting up it to the actual site. In addition, grid type equipment was manufactured for consistent and reliable snow removal performance evaluation under controlled environmental conditions. RESULTS : The IoT-based eco-friendly snow removal system normally carried out the task of acquiring data and images without damaging the appearance or freezing in a low temperature environment. It showed clear snow removal performance in areas where PCM and CNT heating technology were applied to the concrete slab. This experiment shows that normal snow removal tasks can be carried out in low temperature environments in winter. CONCLUSIONS : The integrated environmental test procedures and grid type evaluation equipment are applied to low temperature operation and snow removal performance evaluation of snow removal systems. In the climatic environment chamber, where low temperature environments can be simulated, artificial snow is created regardless of the season to derive quantitative experimental results on snow removal performance. PCM and CNT heating technology showed high snow removal performance. The system is expected to be applied to road site situations to preemptively respond to unexpected heavy snow in winter.

PURPOSES : The purpose of this study is to verify the effect of improving the retroreflectivity of pavement marking by increasing the refractive index of glass bead. METHODS : Pavement marking test-beds has been installed in National Highway 19, 42 and KICT Yeoncheon SOC Center. In testbeds several marking sections were installed for each type of marking materials and glass beads. In this test-beds initial dry and wet retroreflectivity were measured and analyzed. RESULTS : When the refractive index of glass bead was adjusted upward in water based paint(glass bead No.1→ No.2), dry retroreflectivity increased by about 30 to 70%, and wet retroreflectivity slightly increased by about 10 to 40%. When using glass bead No. 2 in water based paint, it was found to meet the standards of the Road Traffic Act. However, since wet retroreflectivity of water based paint slightly exceeds the standard value, a follow-up investigation is needed to determine how long this performance can be maintained. When using glass bead No.1 in MMA(methyl methacrylate), the average wet retroreflectivity was evaluated to be 128 to 150 mcd/lx/m2, and when using glass bead No.2, the average wet retroreflectivity was evaluated to be about 200 to 270 mcd/lx/m2. Accordingly, MMA showed the best performance compared to other paints. CONCLUSIONS : When using glass bead No.1 in water-soluble paints and thermoplastic, it did not meet the wet retroreflectivity standards of the Road Traffic Act. But when using glass bead No.2, it met the wet retroreflectivity standards. As a result of analyzing the road marking budget according to the upward adjustment of the refractive index of glass bead, it was analyzed that if only the material class was adjusted upward, the cost would increase by more than twice the current budget. In order to decrease this budget increase rate(to increase service life), it is necessary to strengthen quality control standards for pavement marking and develop scientific-systematic quality control techniques.

An “online respiratory infectious disease nursing simulation course” was developed to strengthen the nursing competency in respiratory infectious disease. Methods: In this methodological study, an “online respiratory infectious disease nursing simulation course” was developed using the ADDIE (Analysis, Design, Development, Implementation, and Evaluation) model and evaluated using a one-group pre-post quasi-experimental design to ascertain the respiratory infectious disease knowledge, performance confidence, and clinical performance of 37 nursing students. Results: The online course comprised 17 sessions categorized as follows: seven theory, five at-home laboratory training, two case study, and three simulation sessions. All the nursing students engaged in the course successfully fulfilled its requirements by attending all 17 sessions and passing the clinical performance examination. The knowledge, confidence, and clinical performance (t=-6.60, -10.62, and –6.36, respectively; p<.001 for all) pertaining to respiratory infectious disease significantly increased among participants after the concluding simulation session, compared with their pre-scores obtained prior to the course participation. Conclusion: The “online respiratory infectious disease nursing simulation course” significantly improved the nursing knowledge, performance confidence, and clinical performance ability of nursing students in managing respiratory infectious diseases.

PURPOSES : In this study, the resources and energy consumed to produce hot mix asphalt mixtures and hot mix reclaimed asphalt mixtures in asphalt concrete plants were estimated and the emissions from the detailed processes of the production process were evaluated based on TRACI(the tool for the reduction and assessment of chemical and other environmental impacts). METHODS : To estimate the energy consumption of the aggregate drying process, which consumes a significant amount of energy in the production process, an energy consumption calculation model based on the thermal equilibrium equation was used, and the energy consumed for material transportation, storage, and operation of other facilities was cited from the literature. RESULTS : For the system boundary conditions established and the inventory considered, the emissions to produce one ton of hot mix reclaimed asphalt mix are greater than the emissions to produce one ton of hot mix asphalt mix for a number of key impact categories. The process of producing hot mix reclaimed asphalt mixtures was evaluated to consume more resources and energy in the production of recycled aggregates and heating for drying than in the production of hot mix asphalt mixtures, but less resources and energy in the production of binders and natural virgin aggregates and the heating to heat these materials. CONCLUSIONS : The results of the emissions assessment using the life cycle inventory for the production of hot mix asphalt mixtures were generally similar to the results understood in the field and in much of the literatures, confirming the reliability of the methodology. However, in order to evaluate the dominance of specific processes or mixtures, it is believed that the construction of a wide range of inventory databases after inventory redesign is necessary for a specific and rigorous assessment.

본 연구는 방부처리 없이 목재데크에 사용되는 수입 목재들의 자연내후성을 조사하기 위하여 실시되었다. 진주 근교의 야외시험장에서 시행된 4년의 지상근접시험(Ground Proximity Test)을 통해 꾸마루, 말라스, 멀바우, 이페, 자토바의 목재부후균 및 흰개미 저항성을 평가하였다. AWPA E7 방식에 의해 매년 2회 정기점검이 실시되었으며 야외노출시험이 종료된 후 목재 시편의 밀도 프로파일 측정을 통해 부위별 부후 정도가 조사되었 다. 다섯 수종 모두 평가 등급이 9.8 이상으로 목재부후균 및 흰개미에 의한 피해가 거의 발생하지 않은 것으로 나타났다. 일부 시편의 경우 목구면 부근에서 밀도가 약간 감소하는 경향을 보여주었지만, 대부분은 밀도 변화가 거의 발생하지 않았다. 이러한 결과는 이들 수종이 방부처리 없이 국내 목재사용환경범주 H3 (실외 비접지 환경)에 사용할 수 있는 충분한 내구성을 가지고 있다는 것을 의미한다.

This study aimed to develop virtual reality (VR)-based content on surgical aseptic techniques for nursing students and evaluate its effectiveness. Methods: The content was developed following the system development life cycle, involving analysis, design, implementation, and evaluation. Experts and fourth-year nursing students validated the content for its validity and usability of the content. The study was conducted from December 2022 to April 2023. Results: The VR content was developed using Keller's ARCS motivational design model (attention, relevance, confidence, and satisfaction) as the fundamental strategy. Upon applying the VR content developed in this study, the research participants confirmed the values of the following sub-factors: confidence (3.86 out of 5), relevance (3.74 out of 5), attention (3.68 out of 5), and satisfaction (3.65 out of 5). Conclusion: VR-based surgical content on aseptic techniques demonstrates potential benefits for nursing students. Therefore, through systematic development and utilizing of diverse nursing skill content, we can enhance the core competencies of nursing students, providing them with high-quality practical education.

This study aimed to develop virtual reality (VR)-based content on surgical aseptic techniques for nursing students and evaluate its effectiveness. Methods: The content was developed following the system development life cycle, involving analysis, design, implementation, and evaluation. Experts and fourth-year nursing students validated the content for its validity and usability of the content. The study was conducted from December 2022 to April 2023. Results: The VR content was developed using Keller's ARCS motivational design model (attention, relevance, confidence, and satisfaction) as the fundamental strategy. Upon applying the VR content developed in this study, the research participants confirmed the values of the following sub-factors: confidence (3.86 out of 5), relevance (3.74 out of 5), attention (3.68 out of 5), and satisfaction (3.65 out of 5). Conclusion: VR-based surgical content on aseptic techniques demonstrates potential benefits for nursing students. Therefore, through systematic development and utilizing of diverse nursing skill content, we can enhance the core competencies of nursing students, providing them with high-quality practical education.

PURPOSES : The purpose of this study is to verify the influences on the compactibility evaluation of WMA (Warm Mix Asphalt) mixture by laboratory experiments. METHODS : Two types of WMA additives (chemical and wax types) and two types of compactors (marshall and gyratory) are used in laboratory experiments. In addition, two types of WMA processes (wet and dry) are tested to verify the impact of manufacturing process. RESULTS : The laboratory results show that the effects of compaction method on compactibility are different depending on the type of additive. The compaction method has a significant impact on WMA mixture with chemical type additive to extent that it determines whether required criterion is satisfied, but only little on WMA mixture with wax type additive. In the case of wet process for WMA mixture manufacturing, it is hard to assess the air void of HMA mixture made of same asphalt binder used in WMA mixture since the additive has already been added in asphalt binder. And the test results show that air voids of HMA mixture vary within properties of asphalt binder. CONCLUSIONS : Through this study, it is found that compactibility of WMA mixture is affected by the compaction methods depending on the additive types and by the WMA mixture manufacturing process. Therefore, those are recommended to be considered when evaluating compactibility of WMA mixtures.

Human and material damage can be reduced if the risk is evaluated by engineering analysis of fire combustion products, smoke concentration, and smoke movement speed in the event of a fire in apartment houses and officetels. In this study, a lot of research on related safety evaluation in the basement needs to be studied and reflected in design, so experimental research was conducted to analyze the flow of smoke through computer simulation and provide analysis data through evacuation safety evaluation. First of all, the five-story underground parking lot subject to simulation has a large floor area, which is advantageous for improving evacuation safety performance, but it uses temperature detectors to increase detection time and fire spread speed. Second, it was analyzed that the evacuation time at all evacuation ports did not exceed the evacuation time, and as the time from the start of evacuation to the evacuation time was 216.9% compared to the travel time, it was evaluated that the safety performance of the evacuation was secured. Third, the above simulation results are a comprehensive safety evaluation based on the non-operation of fire extinguishing facilities in the fire room to increase safety, which means that smoother evacuation safety performance can be secured by linking fire extinguishing facilities.

PURPOSES : This research assesses the influence of emulsified asphalt on vegetation growth by examining parameters such as moisture content, temperature, pH, electrical conductivity, and analyzing the extent of green coverage using image analysis. METHODS : Within this study, sensors were employed to measure the growth environment of vegetation treated with emulsified asphalt. Furthermore, the analysis of the greening rate through image analysis has been incorporated. RESULTS : Research indicates that emulsified asphalt effectively secures seeds to surfaces and maintains moisture content for an extended period. However, the excessive utilization of emulsified asphalt has been observed to reduce germination and greening rates. CONCLUSIONS : The application of an optimal emulsified asphalt content is presumed to promote vegetation growth. To establish objective, it is imperative to conduct comprehensive research on its long-term structural effects regarding growth, greening rate, and slope when integrated with emulsified asphalt.

The design of buried underground flexible pipes proposed in domestic standards does not properly reflect changes in ground characteristics. Overseas standards suggest that pipe deflection must be considered while designing them. Therefore, in this study, the structural behavior of underground polyvinyl chloride pipes was investigated through experiments and the finite element analysis. In addition, when the pipe deflection occurred at 3% and 5%, the hydraulic characteristics of the polyvinyl chloride pipe showed a slight difference compared to the round pipe.

본 연구는 어촌다운 어촌 조성과 추후 어촌 개발 사업의 근거 및 방향을 제시하는 것을 목적으로 ‘어촌 다움’을 키워드로 텍스트마이닝 분석을 진행하였다. 텍스트마이닝은 온라인상의 비정형 데이터를 분 석하는 방법으로 키워드의 등장 횟수를 나타내는 키워드 빈도분석, 키워드 간의 관계를 시각화하여 나 타내는 N-gram 분석, 텍스트에 나타나는 사람들의 의견이나 성향을 분석하는 감성분석을 통해 다음과 같은 결론을 내렸다. 첫째, ‘어촌다움’ 키워드는 어촌뿐만 아니라 농촌, 산촌 등 타 촌락과의 연관성이 있으며, 상호 관계와 고유한 조건 속에서 특성이 나타나고 있음을 알 수 있었다. 둘째, ‘어촌다움은’ 크게 자연·역사 경관의 보전 및 회복과 주민들의 정주여건 및 환경개선 총 두 가지 방향으로 구분할 수 있었 다. 셋째, ‘어촌다움’ 키워드에 가장 연관이 있었던 어촌 개발 사업인 어촌뉴딜 사업은 감성분석 결과 긍정적인 역할을 했으나 ‘어촌다움’의 일부인 어촌 주민의 정주여건 개선 및 정주기반 구축은 아직 미 비하며, 개선이 필요함을 알 수 있었다. 본 연구는 ‘어촌다움’과 유사한 키워드인 ‘어촌스러움’, ‘어촌다 운’ 등의 키워드를 함께 분석하지 못한 한계점이 있으며, 향후 이러한 키워드와의 종합적인 분석과 어 촌지역 정주기반에 대한 세부적인 방향 제시가 필요할 것으로 판단한다.

PURPOSES : This study intended to derive a methodology that can evaluate water splash caused by distress on the road surface based on experimental methods and to present quantitatively by analyzing the impact on road users. METHODS : Through literature review, the current problems of road pavement and drainage facility standards, the factors of road splash caused by puddle was selected to measure damage. Field measurements were conducted by setting different conditions for each factors and setting different conditions based on the hypothesis. In addition, water splash by surface distress type and puddle was measured to analyze using statistical techniques from correlation to multi-regression. RESULTS : The maximum and effective distance due to road splash increases as the driving speed, regardless of vehicle load and tyre type. Splash was measured according to the type of road distress to analyze the correlation between the influencing factors, and there was a weak correlation between the width and length of the puddle, depth and the effective distance. In addition, the interaction analysis showed that there was an interaction between the width of the water hole and the depth of puddle. Moreover, based on the multi-regression analysis, it was not statistical significant. This is judged to that the number of data samples used for this analysis is limited because the diversity of puddle conditions cannot be set differently for each type of distress. CONCLUSIONS : Since the distress of depending on the size, depth and shape of the road surface, it is necessary to calculate it and present maintenance standards, so this results present an experimental methodology that can intuitively evaluate damage cased by unestablished puddle. From this results, this is expected to be used as a quantitative indicator to evaluate the satisfaction of road users as a functional performance according to road surface condition.

The asphalt concrete industry, accounting for >90% of road pavement, is a crucial contributor to construction waste. This study focuses on the recycling of asphalt concrete recycled aggregates, which currently exhibits a low rate. We investigated the application of these aggregates, combined with hardener and mixing water, in the development of ecofriendly road base materials using circular aggregates. Results revealed that the 13-mm asphalt concrete recycled aggregates met all quality standards. However, the 25-mm aggregates did not conform to the reclaimed asphalt content standard; however, they met other quality standards. Moreover, the experimental results for the hardener and mixing water indicated compliance with all quality standards.