Porous Fe-Cu-C alloy was sintered by Pulsed Current Activated Sintering(PCAS) method within 10 min from horizontal ball mill mixture. The relative density of Fe-20wt.%Cu-0.8wt.%C alloy fabricated by PCAS method was 91%. The average hardness of the Fe-20wt.%Cu-0.8wt.%C alloy was HRB 92. The phase analysis, microstructure and composition information of the sintered alloy were investigated by using XRD, FESEM, EDAX.

In this study, the properties of the substances fermented soybean producted by manufacturing with several Aspergillus strains were investigated. The five soybean cultivar that includes miso, jinpung, pyeongwon, cheonga and chamol were used in this experiment. The pH and total acidity were 6.30~6.66%, and 0.27~0.48%, respectively with differences depending on the samples. The color values for L value, a, and b value were 60.28~69.80, 0.64~3.68, and 11.48~31.21, respectively. The amylase activities, protease activities, and amino-type nitrogen of the jinpung samples were the highest among all cultivars. The mold counts the fermented soybean products by cultivars were 6.18~9.14 log CFU/g, and miso was the highest. Free amino acid and organic acid contents were highest in the jinpung and showed different composition depending on each sample. A total of 18 volatile aroma-compounds, including two acids, four alcohols, four ketones, three phenols, one furan, three pyrazines, and one miscellaneous compounds. In conclusion, it is expected that manufacturing A. oligze inoculation fermented soybean products using jinpung cultivar will improve quality.

Bismuth vanadate (BiVO4) is considered a potentially attractive candidate for the visible-light-driven photodegradation of organic pollutants. In an effort to enhance their photocatalytic activities, BiVO4 nanofibers with controlled microstructures, grain sizes, and crystallinities are successfully prepared by electrospinning followed by a precisely controlled heat treatment. The structural features, morphologies, and photo-absorption performances of the asprepared samples are systematically investigated and can be readily controlled by varying the calcination temperature. From the physicochemical analysis results of the synthesized nanofiber, it is found that the nanofiber calcines at a lower temperature, shows a smaller crystallite size, and lower crystallinity. The photocatalytic degradation of rhodamine-B (RhB) reveals that the photocatalytic activity of the BiVO4 nanofibers can be improved by a thermal treatment at a relatively low temperature because of the optimization of the conflicting characteristics, crystallinity, crystallite size, and microstructure. The photocatalytic activity of the nanofiber calcined at 350oC for the degradation of RhB under visible-light irradiation exhibits a greater photocatalytic activity than the nanofibers synthesized at 400oC and 450oC.

2 (Langmuir, Freundlich, Elovich, Temkin, and Dubinin-Radushkevich) and 3 (Sips and Redlich-Peterson)-parameter isotherm models were applied to evaluated for the applicability of adsorption of Cu(II) and/or phosphate isotherm using chitosan bead. Non-linear and linear isotherm adsorption were also compared on each parameter with coefficient of determination (R2). Among 2-parameter isotherms, non-linear Langmuir and Freundlich isotherm showed relatively higher R2 and appropriate maximum uptake (qm) than other isotherm equation although linear Dubinin-Radushkevich obtained highest R2. 3-parameter isotherm model demonstrated more reasonable and accuracy results than 2-parmeter isotherm in both non-linear and linear due to the addition of one parameter. The linearization for all of isotherm equation did not increase the applicability of adsorption models when error experiment data was included.

The effect of sublimable vehicles on the pore structure of Cu fabricated by freeze drying is investigated. The 5 vol% CuO-dispersed slurries with camphene and various camphor-naphthalene compositions are frozen in a Teflon mold at -25oC, followed by sublimation at room temperature. After hydrogen reduction at 300oC and sintering at 600 °C, the green bodies of CuO are completely converted to Cu with various pore structures. The sintered samples prepared using CuO/camphene slurries show large pores that are aligned parallel to the sublimable vehicle growth direction. In addition, a dense microstructure is observed in the bottom section of the specimen where the solidification heat was released, owing to the difference in the solidification behavior of the camphene crystals. The porous Cu shows different pore structures, such as dendritic, rod-like, and plate shaped, depending on the composition of the camphornaphthalene system. The change in pore structure is explained by the crystal growth behavior of primary camphor and eutectic and primary naphthalene. Keywords: Porous Cu, Pore structure

The concentrations of odor and volatile organic compound (VOC)-inducing substances were measured using selected ion flow tube mass spectrometers (SIFT-MS). SIFT-MS can continuously measure the concentration of odor-causing substances and VOCs in real time without pre-treatment steps. Measurements were conducted during the day and at night at 10 spots in the chemical block of the Sihwa industrial complex. Similar measurement results were observed in the daytime and nighttime for materials except methyl ethyl ketone with high concentrations. A high concentration of hydrogen sulfide was also measured at night. It is expected that an amount of emissions of VOCs and odor-causing substances under the absence of inspection can be traced if measured at other industrial complexes in vulnerable times.

최근 중국을 비롯하여 전세계적으로 모바일 게임의 사용자 수와 시장 규모는 지속적으로 확대되고 있다. 성공적인 모바일 게임 특성은 무엇이며 어떤 요소가 사용자에게 영향을 미치는지를 살펴보기 위해 현재 세계 최대 규모의 게임 시장인 중국 모바일 게임의 대표적 특성을 분석하고 이용자가 게임의 선택과 지속적인 이용에 영향을 미치는 중용한 원인을 찾아봤다. 특히, 게임 방송의 영향력을 감안하여 오피니언 리더로서의 게임 BJ 가 사람들의 게임 선택과 지속적인 이용에 어떠한 영향을 미치는지도 함께 살펴보았다. 기술수용모델(TAM, Technology Acceptance Model)에 기반하여 모바일 게임의 특성과 오피니언 리더에 대한 인식의 외적 변수가 게이머 인식(지각된 유용성, 지각된 용이성, 지각된 오락성)에 미치는 영향을 통해 모바일 게임에 대한 태도와 지속적인 이용 의도를 예측하는 모델을 구축하고, 이를 검증하기 위하여 346 명의 게이머를 대상으로 설문 조사를 실시하였다. 분석 결과, 모바일 특성, 특시 상호작용성과 비용 저렴성, 시공간 편의성이 모바일 게임 이용자의 인식에 큰 영향을 미치는 것으로 나타났으며, 오피니언 리더에 대한 인식이 지각된 오락성에 긍정적인 효과를 보였다. 지각된 오락성과 지각된 유용성은 모바일 게임 태도에 유의한 효과를 보였으며, 게임 태도는 지속적 이용 의도를 유의하게 예측하는 결과를 나타냈다.

본 연구는 흑삼과 흑마늘을 이용하여 블랙잼을 제조하면서 물성의 변화를 모니터링 해 보았다. 블랙잼의 배합 조건은 흑삼(X1, 30-54 g), 흑마늘(X2, 75-135 g), 펙틴 4.5 g, 사과페이스트 270 g 및 프 럭토올리고당 360 g이며, 반응 변수로는 탄력성, 응집성, 씹힘성, 깨짐성 및 부착성으로 반응표면분석을 실시하였다. 탄력성, 응집성, 씹힘성, 깨짐성 및 부착성에 대한 회귀식의 R2는 각각 0.8948, 0.9103, 0.9032, 0.9097, 0.8561로 5∼10%의 유의수준에서 유의성이 인정되었다. 블랙잼의 탄력성이 가장 높은 흑삼 및 흑마늘 배합조건과 그 탄력성은 흑삼 함량 54.00 g 및 105.83 g에서 194.39%로 나타났으며, 탄 력성이 가장 낮은 흑삼 및 흑마늘 배합조건과 그 탄력성은 흑삼 함량 31.48 g 및 119.43 g에서 164.11% 로 나타났다. 블랙잼의 응집성이 가장 높은 흑삼 및 흑마늘 배합조건과 그 응집성은 흑삼 함량 48.85 g 및 129.62 g에서 40.96%로 나타났다, 응집성이 가장 낮은 흑삼 및 흑마늘 배합조건과 그 응집성은 흑삼 함량 50.06 g 및 82.77 g에서 32.96%로 나타났다. 블랙잼의 씹힘성이 가장 높은 흑삼 및 흑마늘 배합조건과 그 씹힘성은 흑삼 함량 42.95 g 및 106.83 g에서 43.19 g로 나타났다. 블랙잼의 깨짐성이 가장 높은 흑삼 및 흑마늘 배합조건과 그 깨짐성은 흑삼 함량 32.10 g 및 88.04 g에서 16,874 g로 나타났으며, 깨짐성이 가 장 낮은 흑삼 및 흑마늘 배합조건과 그 깨짐성은 흑삼 함량 50.53 g 및 83.91 g에서 678 g로 나타났다. 블랙잼의 부착성이 가장 높은 흑삼 및 흑마늘 배합조건과 그 부착성은 흑삼 함량 32.91 g 및 124.60 g에 서 14.06 g로 나타났다. 이상의 결과로부터 흑삼과 흑마늘의 배합비와 블랙잼의 물성의 관계를 조사함으 로서 건강기능성 소재를 이용하여 누구나 즐겨 먹을 수 있는 블랙잼을 제조할 수 있을 것으로 여겨진다.

Cured-in-place-pipe(CIPP) is the most adopted trenchless application for sewer rehabilitation to extend the life of the existing sewer without compromising both direct construction and indirect social costs especially applied in the congested urban area. This technology is globally and domestically known to be the most suitable for partial and full deteriorated pipe structure rehabilitation in a sewer system. The typical design of CIPP requires a significant thickness of lining to support loading causing sewage flow interruption and increasing material cost. This paper presents development of a high strength glass fiber composite lining material for the CIPP application and structural test results. The test results exhibit that the new glass fiber composite lining material has 12 times of flexural strength, 6.2 times of flexural modulus, and 0.5 Creep Retention Factor. These test results can reduce lining design thickness 35% at minimum. Even though taking into consideration extra materials such as outer and inner films for actual field applications, the structural capacity of the composite material significantly increases and it reduces 20 percent or more line thickness as compared to the conventional CIPP. We expect that the newly developed CIPP lining material lowers material costs and minimizes flow capacity reduction, and fully replaceable to the conventional CIPP lining materials.

This study was conducted as a part of the research for the “Development of Big Data Analysis Techniques and AI-based Integrated Support System for Energy-Environment Management.” We collected research results on characterization of distribution of fine dust and re-analyzed using meta-analysis techniques to build “big data” with high potential for school environments. The results of prior studies on the characteristics of fine dust concentration distribution in a school environment conducted in Korea were collected and re-analyzed the results using the metaanalysis technique. In this manner, the variables that could be used to derive the independent variables needed to produce the e-coding book prior to the big data collection, were first derived. The possibility of using the data as independent variables was then evaluated. In this study, three variables: “elementary school vs. middle school vs. high school,” “general classroom vs. special classroom,” and “new classroom vs. old classroom” were evaluated for their application as major classification variables with priority. The necessity of being derived as a major classification variable was examined by testing the difference in fine dust concentration distribution in the school environment by each variable case. Results showed that “elementary school vs. middle school vs high school” and “general classroom vs. special classroom” could be used as independent variables, while “new classroom vs. old classroom” was less likely to be used as an independent variable.

본 연구에서 생력화가 가능하면서 친환경적인 재배법을 개발하고자 병, 상자를 이용하여 표고의 재배적 특성 및 자실체 생산성을 분석하였다. 재배용기별 배양기간은 병에서 배양된 처리구가 30일, 상자에서의 배양이 35일로 나타났고, 갈변기간은 병 재배가 25일, 상자 재배가 40일 이었으며, 병 배양 후 상자재배가 50일로 가장 길었다. 전체 재배기간은 병이 75일, 상자가 90일, 병 배양 후 상자 재배방식이 105일로 가장 길었다. 재배방식별 버섯 발이 수는 상자 17.8개, 병 배양후 상자재배 14.7개, 병 1개 순으로, 자실체 생산성에도 영향을 끼쳐 상자재배는 945 g, 병 배양 후 상자재배 638 g, 병재배가 70 g으로 나타났다. 건조 배지량별 신선버섯 수량(BE, %)은 상자재배가 32.7%, 병 재배가 24.3%, 병 배양 후 상자재배가 22.1% 순으로 상자재배의 자실체 수량성이 가장 우수하였다. 따라서 상자재배는 갈변기간의 단축과 버섯 수량성에서 병 재배, 병 배양후 상자재배 방식보다 유리한 장점이 있어 친환경 생력화 재배법 개발 가능성을 보여주었다.