The study was done to change the morphology and pore size of SBA-15 silica, and the characteristics of SBA-15 silica were investigated with TG-DSC, XRD, SEM, TEM and N2 adsorption-desorption under changing aging conditions. SBA-15 silica having a 2D-hexagonal structure was synthesized and confirmed by SEM and TEM. The structure of mesoporus silica SBA-15 showed a pore having regularly formed hexagonal structure and a passage having a cylindrical shape. This result is in good agreement with the pore forming in XRD and cylindrical shape of the structure in N2 adsorption-desorption isotherm. SBA-15 silica showed a large BET surface area of 603-698 m2/g, a pore volume of 0.673-0.926 cm3/g, a large pore diameter of 5.62-7.42 nm, and a thick pore wall of 3.31-4.37 nm. This result shows that as the aging temperature increases, the BET surface area, pore volume, and pore diameter increase but the pore wall thickness decreases. The BET surface areas in SM-2 and SM-3 are as large as 698 m2/g. However, SM-2 has a large surface area and forms a thick pore wall, when the aging temperature is 100˚C and is synthesized into stable mesoporous SBA-15 silica.

The aging characteristics of gas atomized Mg-6 wt.% Al-1 wt.% Zn alloy were investigated and compared to those of cast Mg-6 wt.% Al alloy. The gas atomized Mg-6 wt.% Al-1wt.% Zn alloy powders had spherical morphology between 1 and 100 in diameter. After compaction under the pressure of 700 MPa at for 10 min, the Mg-6 wt.% Al-1 wt.% Zn alloy showed a grain size of approximately 40 which is smaller than that of the cast Mg-6 wt.% Al alloy, and a relative compact density of approximately 93%. After ageing, the Mg-6 wt.% Al-1 wt.% Zn alloy showed much faster peak hardness than cast Mg-6 wt.% Al alloy. The Mg-6 wt.% Al-1 wt.% Zn alloy showed the new fine precipitations with ageing time, while the cast Mg-6 wt.% Al alloy was almost similar morphology.

Through the understanding of the change of productivity and the ability of error recovery according to aging and the assessment and analysis of them, we may take this research to contribute to make a design for the road-map to help set up the policy of employment for old generation. For this we have taken an experiment of the coordination tester for 100 person who are chosen randomly and analysed the collected data using SAS, which is one of widely used statistical analysis packages. The main results are as follow: ˚ledcirc The result of regression between the working speed and the length of the correction of error shows independence. (pr〉0.2029). ˚ledcirc The regression between age and working speed is statistically significant. (pr〈0.0001) ˚ledcirc The relation between age and the length of the correction of error is not significant. (pr〉0.9123).

고추장의 품질 및 기호성을 향상시키기 위하여 기능성 부재료인 딸기 퓌레를 첨가하여 고추장을 제조한 후 숙성 기간동안 품질특성 변화를 조사하였다. pH는 숙성초기 감소하는 경향을 나타내다가 숙성 60일부터 증가하는 경향을 보였으며, 적정산도는 숙성초기 증가하다가 60일 이후 급격히 감소하는 경향을 나타내었다. 고추장의 수분함량은 숙성기간이 경과함에 따라 증가하였으며 딸기 퓌레의 함량이 높을수록 수분함량이 높은 것으로 나타났다. 한편 수분활성도는 숙성 60일째까지 지속적으로 감소하다 이후 다소 증가하였다. 아미노태 질소의 함량은 숙성기간 중 지속적으로 증가한 반면 식염의 함량은 지속적으로 감소하였다. 색지표인 L*, a*, b*값은 일부 b*값을 제외하고 전반적으로 숙성기간 중 증가하는 경향을 나타내었다. 효모는 담금 직후부터 숙성 30일까지 1.2-4.9×106 CFU/g에서 1.6-5.1×106 CFU/g으로 거의 변화가 없었으나 숙성 30일부터 60일까지 서서히 증가하여 숙성 90일째 1.1-5.9×107 CFU/g으로 급격히 증가하였다. 처리군별로 살펴보면 마찬가지로 숙성초기에는 큰 차이가 없었으나 발효가 진행됨에 따라 딸기 퓌레를 첨가하지 않은 대조군의 효모수가 가장 많은 것으로 나타나 딸기 퓌레의 첨가가 고추장의 숙성 중 물리화학적 품질특성뿐만 아니라 미생물 생육에도 영향을 미치는 것으로 나타났다.

This paper investigates tensile characteristics of the stress aging heat-treated SM45C steel which are aging temperature at 250℃, 300℃, aging time at 1, 3 hours, and applied load at 300, 400N conditions by using acoustic emission. Most suitable aging condition was aging temperature 300℃, aging time 1 hour, and aging applied load 300N. And increased yield load 28.3% than non-treatment specimen in this condition. AE energy in elastic limit increased about 16.7 times than non-treatment specimen. When aging time is 3 hours, yield load decreased than other conditions that possibility is high to have itself defect on inside the specimen or coarse grain size precipitation is different in happened over-aging phenomenon. Especially, in case of 300℃, 3 hours and 400N condition appeared AE energy in elastic limit fairly high about 30 times than non-treatment specimen. This is considered by emit a lot of energies when material causes plastic deformation because the ductility increases on specimen by over-aging phenomenon.

Low-density polyethylene (LDPE)와 Styrene-butadiene-styrene (SBS)를 넣은 개질 아스팔트 혼합물은 바인더에 중량 비로 3~6% 첨가하여 여러 가지 특성을 획기적으로 향상시킨 아스팔트 재료이다. 아스팔트 재료의 개질목적은 일반 혼합물의 균 열저항과 소성 변형과 같은 전형적인 약점을 향상시키기 위해서이다. 이 재료들은 많은 장점들을 가지고 있으며 플랜트 적용이 간편하고 현장적용성이 우수한 특정을 가지고 있다. 여러 해 동안의 경험을 통해 습식 개질 아스팔트와 건식 아스팔트 혼합물이 현장에서 실용화할 수 있게 발전되었다. 본 연구에서는 이를 종합적으로 평가하여 그 장단점을 일반 아스팔트 혼합물과 비교 평가하여 LDPE, SBS 개질 아스팔트 혼합물의 특성을 체계적으로 밝히는 것을 본 연구의 목적으로 한다.

Magnesium alloys are alloyed with rare earth elements (Re, Ca, Sr) due to the limited use of magnesium in high-temperature conditions. In this study, the influences of Zr and Zn on the aging behavior of a Mg-Nd-Y alloy were investigated. magnesium alloys containing R.E elements require aging treatments Specifically, Nd, Y and Zr are commonly used for high-temperature magnesium alloys. Various aging treatments were conducted at temperatures of 200, 250 and 300˚C for 0.5, 1, 3, 6, and 10 hours in order to examine the microstructural changes and mechanical properties at a high temperature (150˚C). Hardness and high-temperature (150˚C) tensile tests were carried out under various aging conditions in order to investigate the effects of an aging treatment on the mechanical properties of a Mg-3.05Nd-2.06Y-1.13Zr-0.34Zn alloy. The maximum hardness was 67Hv; this was achieved after aging at 250˚C for 3 hours. The maximum tensile, yield strength and elongation at 150˚C were 237MPa, 145MPa and 13.6%, respectively, at 250˚C for 3 hours. The strengths of the Mg-3.05Nd-2.06Y-1.13Zr-0.34Zn alloy increased as the aging time increased to 3 hours at 250˚C This is attributed to the precipitation of a Nd-rich phase, a Zr-rich phase and Mg3Y2Zn3.

This study is to focus on the contribution and application in practical models for aging welfare mission in Korea. The number of aging peoples has so rapidly increased from 2000s. This apparence has service some important as the aging welfare of the Korean is being considered. The practical models for aging welfare mission are very significant sphere of social welfare mission. This article is analyzed models and practices for aging welfare through social service in the church community. The church should be realize the missional direction toward the social responsibility. The church can also provide service not only spiritual needs but also social needs toward the aging poor peoples. By doing this way, the church and government can support together hand in hand to achieve better environment for spiritual and physical living. For this aging welfare mission, I want to recommend several suggestions to the church. Firstly, we can be recognize mission of aging welfare to church community. We should be understand that the church must practice important social responsibility for social welfare. Secondly, We need a networking and partnership among the church, NGO, and government for social service. Finally, We can use materially, financially, culturally practical resources in the church toward aging welfare mission. We need flexible strategy and plan in various missional direction for development of aging welfare mission in Korea society.

Ni-20Cr-20Fe-5Nb alloy with or without was manufactured by mechanical alloying process and consolidated by spark plasma sintering (SPS). The grain size of the alloy with was smaller than that of alloy without which results from the effect of suppressing grain growth. The tensile strength at room temperature was increased by the addition of but decreased abruptly at temperature above . It seems to result from the change of deformation mechanism due to fine grain size, that is, grain boundary sliding is predominant at above while internal dislocation movement is predominant at below . After conventional heat treatment process of solution treatment and aging, a small amount of phase was formed in Ni-20Cr-20Fe-5Nb alloy while a large amount of was formed in Inconel 718 in the previous report. This is due to exhaustion of Nb content by the formation of NbC during consolidation.

Microstructural evolution and the intermetallic compound (IMC) growth kinetics in an Au stud bump were studied via isothermal aging at 120, 150, and 180˚C for 300hrs. The AlAu4 phase was observed in an Al pad/Au stud interface, and its thickness was kept constant during the aging treatment. AuSn, AuSn2, and AuSn4 phases formed at interface between the Au stud and Sn. AuSn2, AuSn2/AuSn4, and AuSn phases dominantly grew as the aging time increased at 120˚C, 150˚C, and 180˚C, respectively, while (Au,Cu)6Sn5/Cu3Sn phases formed at Sn/Cu interface with a negligible growth rate. Kirkendall voids formed at AlAu4/Au, Au/Au-Sn IMC, and Cu3Sn/Cu interfaces and propagated continuously as the time increased. The apparent activation energy for the overall growth of the Au-Sn IMC was estimated to be 1.04 eV.

본 연구는 국내 현장실정에 적절한 아스팔트 혼합물의 실내노화방법을 개발하기 위한 연구이다. 강제공기순환식 오븐에서 154℃ 2시간의 단기노화를 거친 혼합물로 제작한 공시체를 110℃에서 24, 48, 72, 96시간 동안 장기노화를 시켰다. 또한 노화시간의 증가에 따라 아스팔트 바인더의 노화정도를 측정하기 위하여 GPC 분석을 수행하였다. 본 연구를 통해 노화시간이 길어짐에 따라 대형분자양이 증가하는 것을 확인하였고, 이에 대한 분석으로부터 적절한 인공노화시간의 추정이 가능함을 알 수 있었다. 본 연구에서 수행된 단기노화방법은 다소 과다하나 이를 RTFO와 유사한 수준으로 처리한다면 110℃로 약 48시간 이상 노화를 시키면 PAV 처리와 유사한 수준의 혼합물 노화가능성이 있음을 확인하였다.

Aging causes thymus involution, and genes in thymus play an important role in the development of the immune system. In this study, we compared genes expressed in thymus of neonatal and peripubertal rats using annealing control primers (ACPs)-based GeneFishing polymerase chain reaction (PCR) and semiquantitative reverse transcription (RT)-PCR. We identified 10 differentially expressed genes (DEGs) with 20 ACPs. Of 10 DEGs, bystin-like, collagen type V alpha 1 (COL5A1), and T-cell receptor beta-chain segment 2 (TCRB2) that are related to immune-function were detected in rat thymus. Bystin-like and TCRB2 were up-regulated, while COL5A1 was down-regulated in peripubertal thymus. Semiquantitative RT-PCR confirmed postnatal changes in expression of bystin-like, COL5A1, and TCRB2. These results suggest that bystin-like, COL5A1, and TCRB2 could regulate immune function controlled in thymus as age increases.

There are several methods determining an appropriate performance grade of virgin binder, which is re(erred as design binder, in RAP contained bituminous mixture design process. However, difficulties have been experienced in utilizing the methods in the field application in Korea, because SHRP binder test, the key tests to determine a design binder, requires well-trained personnel, high price equipment, and time consuming process. Thus, the study investigated the relationship among the binder aging level, RAP contents, and rheologica1 properties of binder. The study results provide mix designer with a simple method in selecting an appropriate grade of virgin binder.

The aging behavior of sintered Al composites with various ceramic contents was investigated. 2xxx series blended powder was used as the starting powder. Ceramic contents were 0wt.% and 5wt.%. The blended powders were compacted at 250MPa. The sintering process was performed at for 60min in a atmosphere. Each part was solution-treated at for 60min and aged at . The Rockwell hardness at the peak aging time increased with ceramic contents. However, the peak aging time at maximum hardness was reduced with increased ceramic contents.