In the concrete construction industry, a majority of the embodied energy and cost of concrete is due to the portland cement. Although the use of industrial by-products such as fly ash has been widely spreaded, the standard specification and certification for eco-friendly concrete is not firmly established in this country. This paper propose a specification for the quality assurance and certification system of eco-friendly concrete especially HVFA(High Volume Fly Ash) concrete.

Chloride-based deicing materials have been reported as the major culprit behind degradation of performance of structures such as surface deterioration and steel corrosion, leading to active researches on development of eco-friendly deicing materials as countermeasures for such issues. However, these eco-friendly deicing materials suffer the issue of poor economic feasibility compared to existing chloride-based deicing material. In order to secure economic feasibility of eco-friendly deicing materials, this research has developed a new eco-friendly deicing material with calcium-based industrial byproducts and assessed its snow-removing performance.

The mortality was tested to organic control materials to the E. maslovskii adults by the dipping method in laboratory. As the result, in 2014, the extracts of Neem Ⅰ was not shown control effect by 10.2% control efficacy to E. maslovskii adults in laboratory. The extract of Sophora flavescens roots was shown 84.7% mortality. And other 5 materials were shown 100% insecticidal activity to the adults in laboratory. I n 2015, Plant extract+pyrolignous acid Matrine 0.45% and Plant extract Matrine 0.5+paraffin oil 8% were shown 100% and 94.6% control efficacy, respectively. In the Japanese apricot orchards, the fruit damage rate was low on spray at 21th April in Daap, Gwangyang city, and 8th May Hwangjeon, Suncheon city in Jeonnam province in 2014. The fruit damage rate differed from spray timing and materials, but it was considered that the control of E. maslovskii should be in late April to early May. Otherwise, in 2015, the fruit damage was significantly low in late April spray in Daap, but no significant was in between one spray at 21th, 27th April and 2 spray that days. Meanwhile, the control effect was better 2 times spray of the days in Hwangjeon, Suncheon city in Jeonnam province. Therefore, in organic Japanese apricot, the use of insecticidal materials recommended to control over twice spay in from meddle to late April.

Since single-use disposable plastic usage has steadily been increasing, recent trends in polymeric research point to increasing demand for eco-friend materials which reduce plastic waste. A huge amount of non-degradable polypropylene (PP)-based pots for seedling culture are discarded for transplantation. The purpose of this study is to investigate an eco-friendly biodegradable material as a possible substitute for PP pot. The blend of poly(lactic acid) (PLA) with poly(butylene adipate-co-terephthalate) (PBAT) was used because of its good mechanical and flexible properties as well as biodegradation. After landfill, various properties of the blend pot were investigated by UTM, SEM, NMR and TGA. The results showed the tensile strength of the blend film rapidly decreased after 5 weeks of landfill due to degradation. From NMR data after landfill, the composition of PLA in the blend was decreased. These results indicate that the biodegradation of the blend preferentially occurs in PLA component. To investigate the effect of holes in pot bottom and side on root growth, a plant in the pot was grown. Some roots came out through holes as landfill period increases. These results indicate that the eco-friendly pot can be directly planted without the removal of pot.

The use of de-icing and anti-icing materials is widespread throughout countries enduring cold and snowy weather to ensure safe winter-driving conditions. In particular sodium and calcium chlorides, chlorides-based materials have been used for many years. However, as the negative effects of corrosion on motor vehicles, infrastructures, and the environment have been understood, which concerns have risen regarding the use of these salts for de-icing roads. For this reason, we investigated the advanced technology and research trend of eco-friendly de-icing materials.

In this study, it was developed eco-friendly alkali-activated slag fiber reinforced concrete using ground granulated blast furnace slag, alkali activator (water glass, sodium hydroxides), and steel fiber. Eight reinforced concrete beam using alkali-activated slag concrete were constructed and tested under monotonic loading. The major variables were mixture ratio of alkali activator, mixed/without of steel fiber. Experimental programs were carried out to improve and evaluate the flexural performance of such test specimens, such as the load-displacement, the failure mode, the maximum load carrying capacity, and ductility capacity. All the specimens were modeled in scale-down size. The reinforced concrete beams using the eco-friendly alkali-activated slag fiber reinforced concrete was failed by the flexure or flexure-shear in general. In addition, the maximum strength increased with the adding the mol of sodium hydroxide, and the specimen reinforced the steel fiber showed the value of maximum strength which is increased by 15.8% through 25.9%. It is thought that eco-friendly alkali-activated slag fiber reinforced concrete can be used with construction material and product to replace normal concrete. If there is applied to structures such as precast concrete member and production of 2nd concrete product, it could be improved the productivity and reduction of construction duration etc.

‘친들’은 국립식량과학원 벼맥류부에서 2012년도에 벼멸구 저항성을 가진 HR22538-GHB-36-4와 고품질이며 수량이 우수한 익산471호를 교배하여 육성한 친환경재배적응 고품질 복합내병충성 우수 품종이다. ‘친들’은 서남부해안지 및 평택이남 평야지(충남, 전남북, 경남북) 보통기 보비재배에서 이앙부터 수확까지 124일의 생육일수를 가진다. 간장은 83츠 이며 내도복성이다. 병해충 저항성은 벼멸구, 벼흰잎마름병 K1, K2, K3 균계, 벼줄무늬잎마름병에 강하다. ‘친들’은 쌀알이 맑고 투명하며 중립종이다. 비교품종인 남평벼 보다 단백질이 5.9%로 낮고 밥맞이 매우 좋다. 수량성은 3년간 지역적응성 시험 결과 5.61 MT/ha 이다. ‘친들’은 복합내병충성 육종에 있어 매우 유용한 유전자원으로 사용될 것이다.

The main purpose of the research is to suggest a new business model of direct distribution of organic agricultural products cultivated in suburban area. To secure competitiveness, logistics cost reduction is important through direct transaction of organic agricultural products cultivated on suburban area. The research addresses food safety, farmers' income and unemployment issues with Eco-M business model. The research methods include investigation on the followings: current domestic agriculture; related problems on the existing literature reviews; the current status of suburban agriculture; specialty store of eco-friendly agricultural products. Eco-M business model can solve various problems of suburban agriculture supply system, challenges of organic farming specialty stores, unemployment issues, and difficulties of processing verticalization. Future research should include followings. First, there should be comparative analysis between businesses of environmentfriendly specialty stores through suburban agriculture and producer's agriculture connected with organic farming market. Second, it is required to develop strategy of environment-friendly specialty stores. Finally, analysis of the potential of Sextic industries is necessary throughout production-process-service process.

In this experiment no solvent based polyurethane(PU) adhesives were prepared with the polyol, isocyanate, dioctyl phthalate(DOP), 2-hydroxyethylacrylate(2-HEA) and other acrylate monomers. The softenening point of the PU adhesives measured by Ring & Ball method were examined in the present study. And adhesion strength and mechanical properties such as tensile strength and 100% modulus of the PU adhesives were evaluated by Universal Test Machine. The experimental results showed that increase of both DPE-41, benzoylperoxide(BPO) and toluene diisocyanate(TDI) increased softenening point, adhesion strength, tensile strength and 100% modulus. However as DOP content increased sofenening point, adhesion strength decreased and tensile strength, 100% modulus also decreased.

Purpose – This study classified consumers' value inclination to find out ways to enhance consumers' eco-friendly product purchase intention. Further, it verified the differences among eco-friendly product purchase intentions depending upon value inclination. Research design, data, and methodology – The structured model and hypotheses were established, and 202 copies of effective questionnaires were used. In order to verify the hypotheses, we used single regression analysis, multiple regression, 3-step mediating regression, and path analysis. Results – Individualism had a positive influence upon materialism, need for uniqueness, and face wants, and collectivism had a positive influence upon materialism only. Factors of self-expressive consumption inclination had a positive influence upon eco-friendly product purchase intention, and factors of value inclination also had a positive influence. Finally, self-expressive consumption inclination mediated between value inclination and eco-friendly product purchase intention. Conclusion – Consumers with individualism inclination felt the need to connect the ownership of an eco-friendly product with their extended self and, further, it was clear that not only the government but also enterprises should build up their public image regarding eco-friendly products.

Recently, in our country has been heightened awareness of the performance of non-combustible construction materialsand eco-friendly. In addition, bottom ash can be used as a high-value, but it is a situation that is buried. Therefore, thebasic experimental study results on the development possibility of eco-friendly nonflammable floor finishing materialsusing the bottom ash, which is an industrial byproduct, are as follows: (1) As a test result of the compressive strengthof mortar conducted to review the use possibility of bottom ash as a floor finishing material, the standard mix that didnot use bottom ash showed 31.3MPa, a 25% replacement mix showed 33.7MPa and a 50% replacement mix showed33.6MPa. Consequently, higher results of the compressive strength of mortar were demonstrated up to the 50%replacement mix, compared to the standard mix. (2) As a flow test result by addition of superplasticizer, the flow was215mm in the 0.2% added mix, and 253mm in the 0.4% added mix. However, material separation was confirmed inthe case of the 0.4% added mix. Therefore, the addition meeting 190mm set forth in the KS F 4041 was 0.2%. (3) Asa result of bond strength test to review bond strength with concrete structure, it was 1.26MPa in case polymer powdercontent was 2%, except for 1.02MPa of basic mix, and it was 1.75MPa in the case of 4%, and all these met1.2MPaand more of bond strength set forth in the KS. (4) As a result of a wear resistance experiment conducted to review theuse possibility as a floor finishing material for parking lot, the mix meeting 0.15mg/mm2 or less of wear resistance setforth in the KS F 4041 was the case of 4% of polymer powder addition, which showed 0.13mg/mm2.

배 과원 문제해충의 하나인 꼬마배나무이(Cacopsylla pyricola)의 월동성충이 낳은 알에 대해 10, 13, 18, 22, 25℃에서 부화율을 조사하여 온도와 발육률에 대한 선형모형으로 Y=0.00319X + 0.00615((R2=0.809899)(Y=temp., X=dev. rate))로 도출하였고, 알에 대한 발육영점온도는 약 –1.94로 추정되었다. 포장에서 월동성충이 낳은 알이 50%를 초과하여 부화하는 시기와 2월 1일부터 일일 최고기온 6℃ 이상의 온도를 누적한 결과, 2008, 2009, 2011년에 각각 429.7, 417.6, 424.3일도였으며, 이는 만개기를 기준으로 만개 3~7일전이다. 한편 아바멕틴 유제, 석회유황합제, 기계유유제, 및 유기농업자재 13종은 월동성충이 낳은 알에 대한 살란 효과는 없는 것으로 생각되고, 배 생육기인 2012년 5월 21일, 6월 5일 2회 살포시 방제가 90% 이상을 보인 유기농업자재는 D사의 Azadiractin A+B, Nimbin, Salanin, Meliantriol, Vepol 등 혼합물 등 4종이었다.

This study was conducted to select and develop effect of eco-friendly organic materials for the eco-friendly prevention of Anthracnose occurred in the ginseng. Anthracnose on ginseng is occurred by Colletotrichum gloeosporioides and the crop damage is severe especially from July to August after rainy season. The test results showed that control effect by test products materials on the three years ginseng and four years ginseng field was lower in eco-friendly organic materials than that of chemical pesticide. However, the control effect of bordeaux mixture was higher with 71.3% and 73.8% levels than those of mineral matter, microbial agent, and developed plants extract mixtures (Eugenol, Curcumin, Wood vinegar, etc). On the other hand, three types of developed plants extract mixtures (3 types) showed control effect in a range of from 58.1% to 63.6% against Anthracnose which was higher as compared with plant extract alone and sodium silicate regardless of ages of ginseng. The results of this study would attribute in verifying the control effect of eco-friendly materials against Anthracnose for ginseng through investigating antimicrobial compounds contained in the plants body. Also, it would be used as control method against Anthracnose occurred in ginseng by judging the right control time through monitoring occurrence of disease.

This experiment was carried out to investigate the effect of several organic compost on the growth and rootyield of Angelica gigas Nakai with organic cultivation. After fertilizing the soil with organic fertilizer, the dry weight ofliming fertilizer showed a slow change, while microorganism fertilizer decreased about 29% until 20 day after fertilizing. At110 days after fertilizing, microorganism fertilizer decreased more than liming fertilizer. Liming fertilizer decomposedslowly, while microorganism fertilizer decomposed early on rapidly but gently after 20 days in decomposed rate of organicfertilizer. Dried root yields per 10a of A. gigas were not significance between 277.6㎏ in conventional fertilizer and 277.7㎏,280.5㎏ in N 1.5, N 2.0 times of microorganism fertilizer. Decursin and decursinol angelate contents in A. gigas were9.08~9.07% from N 1.0 and N 1.5 times in liming fertilizer, and 7.94~8.12% from N 1.5 times and N 2.0 times in microor-ganism fertilizer, compared to 7.31% of conventional treatment.

In order to utilize waste wood chip for pavement, a polyurethane resin that is both eco-friendly and suitable for bindingwood chip was developed as the binder, and workability was examined through laboratory experiment for characteristicsof waste wood chip mixture using the polyurethane resin and through test pavement on the field. The new resin was aVOC reduction type free from plasticizer and solvent classified as endocrine-disrupting chemicals and environmentalhazardous substances, and NCO equivalents were set at 8, 9, 10 and 11% by modifying the polyisocyanate-polyol ratio.Laboratory experiment showed that polyurethane resin with NCO equivalent of 9% and 10% had excellent characteristicsas binder for waste wood chip. In the field experiment applying waste wood chip and polyurethane resin in the massratio of 1:0.8, tensile strength of the pavement system was about 30% higher than that using polyurethane resin currentlybeing sold, and permeability coefficient and elasticity thereof were the same as that using the resin currently being sold.Also, examination of compaction methods for waste wood chip pavement system showed that non-heating hand rollerand compactor had the problem of the “waste wood chip - resin mixture” sticking to the roller during the compaction but that heating hand roller had excellent workability and could achieve good planation surface relatively easily.