This study was aimed not only to develop the gill net and trap made of biodegradable monofilaments in order to prevent a ghost fishing and to protect marine ecosystem, but also to analyze their spinning process and physical properties. Results showed that the spinning speed of biodegradable polybutylene succinate(PBS) monofilament was estimated to be approximately 100m/min when spinning temperature and cooling water temperature were adjusted at 180℃ and 3℃, respectively. The breaking loads of PBS monofilaments were estimated to be 35.3kg/mm2 at Φ0.2mm, 46.5kg/mm2 at Φ0.3mm, and 49.7kg/mm2 at Φ0.4mm in the dry condition, respectively. However, its breaking loads in the wet condition were reduced by 2.4-5.5%, compared to those in the dry condition. The knotted strength of PBS monofilament at Φ0.2mm was estimated to be 98.6% of PE in the dry condition. The breaking load of PBS monofilament at Φ0.3mm was evaluated to be 81.8% of PA, and its softness showed 3 times less than that of PA in the wet condition. The breaking load of PBS monofilament at Φ0.4mm was 95.3% of PA, and its softness showed 1.6 times less than that of PA in the wet state. However, the load elastic elongations of two kinds of monofilaments were estimated to be 1% higher than that of PA.

본 연구에서는 남성용 소모직물의 품질향상을 위해 국외 유명 브랜드 소모직물의 물성을 분석하고 이를 바탕으로 국내 소모직물을 시생산하여 국외 소모직물과 비교 분석하였다. 분석방법은 의류소재의 객관적인 평가방법인 KES-FB system과 국내 복지 전문가 등에 의해 평가된 주관적인 평가방법인 Blind field test 방법으로 소모직물의 물성을 평가하여 두 측정 방법 간의 결과를 비교해 보고자 한다. 본 연구에서는 이태리와 영국 그리고 국내에서 생산된 7개 품종의 14개 소모직물 시료를 사용하였다.

본 연구에서는 국내 7개회사와 중국과 대만의 각각 2개회사에서 만든 PET POY 사(絲)의 섬도, 인장역학특성 그리고 열 수축특성 등의 물성편차에 대해 연구하였다. 이를 위해 준비된 시료로서는 239d/96f 중국사와 255d/48f의 국내사를 시료로 사용하였으며 120d 굵기의 중국사와 대만사 두 가지를 국내 6개 기업에서 만들어진 사(絲)와 또한 각각 비교하였다. 그리고 섬도, 인장역학특성 그리고 습열과 건열 수축률 등과 같은 물성 실험은 원사 케이크 내의 사(絲), 50,000m를 1개 층으로 각각 나누어 각각의 층별로 측정하였으며 이들 원사 케이크 내외층의 물성의 편차를 국내 외 원사별로 측정 분석하였다. 이들 결과들은 국내 중소 제직, 사가공 기업에게 고부가가치 고감성 소재를 개발하는데 필요한 기초물성 데이터를 제공해주는 데 큰 의의를 가진다.

최근 국제 유가의 상승으로 인한 선박 운용비를 절감하기 위하여 중소형 선박에서도 저질연료유의 사용이 검토되고 있는 추세이다. 이 연구에서는 현재 중소형 선박에서 연료유로 사용중인 경유와 중유MF380을 혼합하여 소형선박에 사용이 가능하도록 제조한 혼합연료유인 MF30 연료유에 대하여 그 물리 화학적 특성을 분석하고 정제처리 및 연료유첨가제 효과에 대해 알아보았다. 연구결과 두 가지 전처리 방식인 원심식청정기와 가열 및 균질 방식(M.C.H)의 효과는 다소 미약하였지만, 유동점과 인화점은 다소 낮아졌다. 연료유첨가제로 인한 개질 효과는 뚜렷이 나타나지 않았다.

To prepare weather-resistant silicone/acrylic resin coatings for an architectural purpose, tetrapolymers were synthesized by a radical polymerization. 3-Methacryloxypropyltrimethoxysilane (MPTS) as a silicone monomer and n-butyl acrylate, methyl methacrylate, and n-butyl methacrylate as acrylic monomers were used. The compositions of monomers were adjusted to fix the glass transition temperature of acrylic polymer for 20℃. The composition of MPTS in the synthesized polymer were varied from 10 wt% to 30 wt%. On the basis of synthesized resin amber paints were prepared and their physical properties and effects for weatherability were examined. The presence of MPTS in silicone/acrylic resins generally resulted in low molecular weight and broad molecular weight distribution, and also lowered the viscosity of the copolymers. The coated films prepared from these resins showed good and balanced properties in general. Adhesion to the substrate was outstanding in particular. Weatherability tests were carried out in three different types such as outdoor exposure, QUV, and SWO. The test results showed that the silicone/acrylic resins containing 30 wt% of MPTS had weather-resistant properties.

PU type flame-retardant coatings (TBAO/L-75, TBAOL ; TBAO/N-100, TBAON) were prepared by blending bromine-containing modified polyester (TBAO) which was synthesized in our earlier work. with two kinds of isocyanate curing agents, Desmodur L-75 and Desmodur N-100. Physical properties of the prepared flame-retardant coatings were tested. TBAOL shows better hardness than TBAON, while TBAON shows better viscosity, accelerated weathering resistance, yellowness index and lightness index difference than TBAOL. There were no remarkable differences in fineness of grind, 60˚ specular gloss, cross-hatch adhesion, and abrasion resistance of TBAOL and TBAON. There was no discernable difference in flame-retardancy between the two flame-retardant coatings, TBAOL and TBAON. When the content of tribromo acetic acid, which is flame-retarding component, was 30wt% the LOI value was in a range of 29~30%, which indicates that the two coatings are good flame-retardant coatings.

This paper describes the physical properties of filled Nylon6 composites resin with nano-sized carbon black particle and graphite nanofibers prepared by melt extrusion method. In improving adhesions between resin and fillers, the surface of the carbon filler materials were chemically modified by thermo-oxidative treatments and followed by treatments of silane coupling agent. Crystallization temperature and rate of crystallization increased with increases in filler concentration which would act as nuclei for crystallization. The silane treatments on the filler materials showed effect of reduction in crystallization temperature, possibly from enhancement in wetting property of the surface of the filler materials. Percolation transition phenomenon at which the volume resistivity was sharply decreased was observed above 9 wt% of carbon black and above 6 wt% of graphite nanofiber. The graphite nanofibers contributed to more effectively in an increase in electrical conductivity than carbon black did, on the other hand, the silane coupling agent negatively affected to the electrical conductivity due to the insulating property of the silane. Positive temperature coefficient (PTC) phenomenon, was observed as usual in other composites, that is, temperature increase results conductivity increase. The dispersity of the fillers were excellently approached by melt extrusion of co-rotational twin screw type and it could be illustrated by X-ray diffraction and SEM.

The high-solid coatings were prepared by blending the synthesized acrylic resin in the previous paper, and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. The 60˚ specular gloss, impact resistance, cross-hatch adhesion, and heat resistance of the films proved to be good, and the pencil hardness, drying time, and pot-life proved to be slightly poor. From a viscoelastic measurement using a rigid-body pendulum, curing was accelerated with the Tg value.

Development of recycling method at cemented carbide scraps was researched. Some properties of recycled cemented carbides were investigated. Recycled WC fine powder suffered the surface oxidation. Therefore it was necessary to be done by reduction treatment at 1073K-3.6ks under hydrogen atmosphere. When sintering condition at 1673K-3.6ks was treated under vacuum condition, it gained the deflective strength of about 90%, and gained hardness and sintering density about same value compared with commercial alloys. As a result, it was able to recycle only by 7 processes.

Tarakjuk with different amylose content was made up using roasted rice flours that consisted of the highest enzyme-resistant starch (RS), while differential scanning calorimetry (DSC) was also utilized to measure the gelatinization temperature of these roasted rice flours in order to establish cooking temperature of tarakjuk. The following qualities of tarakjuk with different amylose content were studied: color, viscosity, spreadability, starch fractions involving total starch (TS), rapidly digestible starch (RDS), slowly digestible starch (SDS) and RS, in vitro starch digestibility (IVSD) and sensory properties. During experimentation, it was found that as the amylose content of the rice flour decreased, the L value of tarakjuk decreased, whereas a value increased significantly (p〈0.05). Also, while viscosity showed to increase significantly (p〈0.05), on the opposite end, the property of spreadability decreased. TS ranged from 15.95~17.31%, RDS 9.36~10.16%, SDS 5.46~6.91% and RS 0.33~1.07%, on a dry basis. Although the amylose content of rice flours decreased, IVSD increased, however showing no significant difference. When testing the sensory properties of tarakjuk, color and viscosity increased, whereas clumpiness decreased. Ilpum tarakjuk showed the highest score for nutty taste and overall acceptance levels. In fact a high correlation was shown between nutty taste and overall acceptance level (p〈0.01), which leads one to believe that nutty taste is a prime factor that greatly influences overall acceptance. Furthermore, viscosity was positively correlated with both a and b values, however negatively correlated with L value (p〈0.05). Moreover, roasted nutty taste and overall acceptance were positively correlated with a value (p〈0.05), respectively. In conclusion, the above results suggest that tarakjuk could be made by choosing the appropriate rice flour based on the nutritional or sensory purpose.

In the previous study, three kinds of monomers and the functional monomer, acetoacetoxyethyl methacrylate (AAEM), which could improve the film property and cross-linkage, were polymerzied into acrylic resin copolymers (HSA-98-20, HSA-98-0, HSA-98+20) containing 80% solid content. In this study, the high-solid coatings(HSA-98-20C, HSA-98-0C, HSA-98+20C) were prepared by the curing reaction between acrylic resins containing 80% solid content and isocyanate at room temperature. Various properties were examined for the film coated with the prepared high-solid coatings. The introduction of AAEM in the coatings enhanced the abrasion resistance and solvent resistance of coatings, which indicated the possible use of high-solid coatings for top-coating materials of automobile. The curing times measured by viscoelastic measurement were 350, 264, and 212 min for HSA-98-20C, HSA-98-0C, and HSA-98+20C, respectively. This shows that the curing times become shorter with increasing Tg values.

To maximize a synergy effect in flame-retardancy of flame-retardant coatings, phosphorus and chlorine were introduced in polymer chains. Two-components PU flame-retardant modified polyesters (ABTTC-10C, -20C, -30C) were prepared by curing, at room temperature, of isocyanate (allophanate-trimer) and prepared modified polyesters which contain phosphorus and chlorine. To examine the film properties of the prepared flame-retardant coatings, film specimens were prepared with the prepared coatings. The film properties of ABTTC, ABTTC-10C and ABTTC-20C, which contain 0, 10 and 20wt%, 2,4-dichlorobenzoic acid (2,4-DCBA), respectively, were proved to be good, whereas the film properties of ABTTC-30C, which contains 30wt% 2,4-DCBA, were proved to be a little bit poor. Two kinds of flame retardancy tests, 45˚Meckel burner method and LOI method, were performed. With the 45˚Meckel burner method, three flame-retardant coatings except ABTTC showed less than 3.4 cm of char length, and showed less than 2 seconds of afterflaming and afterglow. From this result, the prepared flame-retardant coatings were proved to have the 1st grade flame retardancy. With the LOI method, the LOI values of the coatings containing more than 10wt% 2,4-DCBA were higher than 30wt%, which means that the coatings possess good flame-retardancy. From these results, it was found that synergistic effect in flame-retardancy was taken place by the introduced phosphorus and chlorine.

본 연구는 혼합상토의 보수성 증가를 위하여 polyacrylamide 고흡수성 수지 Stocksorb C를 혼합할 경우 상토의 물리성에 미치는 영향을 밝히기 위하여 수행하였다. 네종류 혼합상토, 피트모쓰 + 버미큘라이트(1:1 , v/v; PV), 피트모쓰+부숙왕겨(1:1, v/v; PR), 피트모쓰+부숙톱밥(1:1, v/v; PS), 그리고 피트모쓰+부숙수피(1:1, v/v; PB)를 조제하는 과정에서 STSB를 혼합하고, 플라스틱 포트에 충전하였으며, 5주 후에 상토의 물리적 특성을 측정하였다. STSB의 혼합비율이 증가할수록 PV, PS 및 PB 상토의 공극률이 증가하여 5% 수준의 통계적인 차이가 인정되었고, 직선 또는 2차곡선회귀가 성립하여 경향을 찾을 수 있었다. STSB의 혼합비율 증가로 PS와 PB상토의 용기용수량이 뚜렷하게 증가하였으나 PV 및 PR상토에서는 STSB의 혼합비율에 따른 처리간 차이가 인정되지 않았다. 특히 STSB의 혼합은 PV PS및 PB 상토의 기상률을 뚜렷하게 증가시켜 처리간 통계적인 차이와 함께 직선 및 2차곡선회귀가 성립하여 경향이 뚜렷하였다. 고흡수성 수지의 혼합비율이 높아질수록 4.90 kPa, 9.81 kPa, 29.4 kPa및 1.5 MPa 토양 수분장력 하에서 존재하는 수분량이 많았다. 각 상토별로 29.4 kPa이나 1.5 MPa에서 존재하는 수분은 PV 혼합상토에서 적었고, PB와 PR 혼합상토에서 유사한 수준이었으며, PS 혼합상토에서 가장 많았다. 이는 고흡수성 수지의 혼합비율이 높아짐에 따라 상토가 보유하는 수분량이 증가하지만 식물이 쉽게 흡수할 수 있는 수분량이 증가하지 않음을 의미한다.

Many researchers have been focused on polymer electrolyte membrane (PEM) to improve performance of a fuel cell. Sulfonpolyimide with hydrocarbon was synthesized from ODA (4,4-diaminodiphenyl ether), ODADS (4,4-diaminodiphenyl ether-2,2-disulfonic acid), NTDA (1,4,5,8-naphthalenetetracarboxylicdianhydride) and CSA (chlorosulfonic acid). In order to estimate the feasibility as a fuel cell, the performance of sulfonpolyimide was analyzed through a swelling degree, IEC (ion exchange capacity), ion conductivity and TEM (transmission electron microscope). As the results of this performance test, swelling degree, IEC and ion conductivity were 37%, 0.06 meq/g and 0.08 S/cm respectively, when the CSA concentration was 0.4 M. It was thought that sulfonpolyimide could be used as a fuel cell through improvement of electrolyte membrane.