현재 관광 산업과 문화 사업이 번성하는 대배경 하에, 유적지 기념 경 관의 가치는 국가 문화 공원 건설 과정에서 더욱 돋보여야 한다. 본 연 구는 문화 경관 이론의 관점에서, 쓰촨 원촨 대지진 유적 공원을 기념 관광 고전 지구로 삼아 연구 대상으로 하여, 유적 기념 경관에 대한 관 광객 지각의 구조 방정식 모델을 구축한다. 설문조사를 통해 관련 수칙 을 얻고 분석하였다. 연구 결과, 지각된 가치가 관광객 만족도와 긍정적 인 상관관계가 있으며, 만족도를 통해 간접적으로 충성도에 영향을 미친 다는 것을 발견했다. 지각된 품질과 전체 이미지는 지각된 가치의 중요 한 요소이며 서로 영향을 미친다. 지각된 품질은 경관, 교육, 서비스의 3 가지 차원을 포함하며, 유적지 본체 외에도, 관광객들은 경관 조각, 경관 장치, 상징적 경관, 문화 창조 제품 및 교육 체험에 대한 지각이 높아, 지각된 가치를 향상시키는 중요한 요소이다. 전체 이미지는 인지 및 감 정의 2가지 차원을 포함하며, 지각된 가치를 통해 간접적으로 충성도에 영향을 미친다. 이러한 연구 결과를 바탕으로, 사례 지역에서 관광객 지 각을 향상시키기 위한 대책 및 제안을 시도하였다.

The objective of this study was to conduct research and analysis using Group Focus Interview to survey the between construction site workers and managers implementing for the Severe Accident Punishment Act. Focused on measures to improve safety management effectiveness for the effectiveness of establishing a safety management system. A plan to improve the efficient safety management system was presented to 50 construction industrial managers and workers. In order to ensure the industrial accident prevention policies appropriately, it is necessary to be aware of safety obligations for workers as well as business operators. In addition, despite the existence of a commentary on the Serious Accident Punishment Act, confusion in the field still persists, so in the event of a major accidents, the obligation to take safety and health education is strengthened, and effective case education is proposed by teaching actual accident cases suitable for actual working sites. It is necessary to make all training mandatory, and it is necessary to reconsider awareness through writing a daily safety log, awareness of risk factors, etc., and writing down risk information. Above all, at the construction ordering stage, it is necessary to keep the construction safety, request corrections and supplements for problems issues that arise, and consult between the orderer and the construction company about the problems issues. Rather than having only the construction company correct or supplement the safety management plan, the contents should be shared with supervisors and workers to establish a more practical solution. Results of this study will contribute to improving the effectiveness of the serious accident and construction safety management system.

Purpose: This study aimed to identify and describe the experiences of new nurses trained by clinical nursing educators. Methods: Data were collected through focus groups and in-depth interviews conducted between July 27 and August 12, 2021. The collected data was qualitatively analyzed through content analysis. Results: Six themes and 19 subthemes emerged. The themes included: “Worried about not adjusting to work”, “Not feeling at ease with the preceptor”, “Experiencing the benefits of working with the clinical nurse educator”, “Getting practical support from the clinical nurse educator”, “Receiving mental and emotional support from the clinical nurse educator”, and “Appreciating successful adjustment”. Conclusion: This study confirmed the importance of the educator’s role in helping new nurses adjust to the workplace and develop competence.

PURPOSES : This study aimed to analyze the primary maintenance procedures and safety inspection checklist characteristics for suspension bridges. The study referred to the current suspension bridge safety management manual and conducted an on-site safety inspection. By comparing and analyzing any missing or inadequate inspection and management procedures, the study identified major inspection and management areas requiring improvement, and proposed potential solutions. METHODS : The study referred to the current suspension bridge safety management manual and conducted on-site safety inspections. By comparing and analyzing any missing or inadequate inspection and management procedures, the study identified major inspection and management areas requiring improvement, and proposed potential solutions. RESULTS : The study found that suspension bridges are currently inefficiently managed compared to other facilities subject to more rigorous maintenance and safety inspection. Therefore, maintenance and safety inspection procedures require improvement. CONCLUSIONS : For effective safety management and to reduce potential accident risk factors arising from negligent management, major improvements were suggested. Scientific maintenance and safety management could be achieved by incorporating enhancements into statutory requirements and improving management and inspection procedures. This long-term approach is likely to be more economical than the current methods, which lead to higher maintenance and repair costs and increased social costs from traffic accidents.

Particulate matter is known to have adverse effects on health, making it crucial to accurately gauge its concentration levels. While the recent advent of low-cost air sensors has enabled real-time measurement of particulate matter, discrepancies in concentrations can arise depending on the sensor used, the measuring environment, and the manufacturer. In light of this, we aimed to propose a method to calibrate measurements between low-cost air sensor devices. In our study, we introduced decision tree techniques, commonly used in machine learning for classification and regression problems, to categorize particulate matter concentration intervals. For each interval, both univariate and multivariate multiple linear regression analyses were conducted to derive calibration equations. The concentrations of PM10 and PM2.5 measured indoors and outdoors with two types of LCS equipment and the GRIMM 11-A device were compared and analyzed, confirming the necessity for distinguishing between indoor and outdoor spaces and categorizing concentration intervals. Furthermore, the decision tree calibration method showed greater accuracy than traditional methods. On the other hand, during univariate regression analysis, the proportion exceeding a PM2.5/PM10 ratio of 1 was significantly high. However, using multivariate regression analysis, the exceedance rate decreased to 79.1% for IAQ-C7 and 89.3% for PMM-130, demonstrating that calibration through multivariate regression analysis considering both PM10 and PM2.5 is more effective. The results of this study are expected to contribute to the accurate calibration of particulate matter measurements and have showcased the potential for scientifically and rationally calibrating data using machine learning.

PURPOSES : In this study, the basis for improving the maintenance method of road pavement in Jeju Island, where deterioration is accelerating, was presented through field construction and analysis of various combinations of maintenance methods. METHODS : Construction was performed on Jeju Island's Aejo Road, which has high traffic and frequent early damage, using various asphalt mixtures mainly applied in Jeju Island, with different maintenance cross-sections depending on the level of repair. The quality and performance of the asphalt mixture collected during construction were evaluated, and MEPDG was used to analyze the service life according to the type and maintenance level of the mixture. RESULTS : While the mixture for the surface layer satisfied the quality standards and had excellent rutting and moisture resistance performance, the asphalt mixture for the intermediate and base layer did not satisfy the quality standards such as air voids, so it was judged that quality control was necessary during production. The section repaired to the base layer was found to be advantageous for the integrated behavior of the pavement and had the best structural integrity. As a result of predicting the service life, the estimated life of the section where only the surface layer was repaired was analyzed to be approximately 7 years, the section where the intermediate layer was repaired was 14.5 years, and the section where the entire section up to the base layer was repaired was analyzed to be 18 years. CONCLUSIONS : In Jeju Island, where deterioration is accelerating, it was analyzed that when establishing a maintenance plan, it is necessary to consider repairing the middle and base floors in order to secure the designed life of 10 years.

목적: 본 연구의 목적은 작업치료에서 과거와 비교하여 인지재활의 발전현황을 조사하고, 현재 인지평가와 인지중재에서 문제와 제도적 난제를 밝히며, 한국의 인지재활 발전을 위해 전략적 방향성을 제시하는 등 정책 제안을 도출하기 위함이다. 연구방법: 본 연구의 최초 조사대상자는 현재 작업치료 현장에서 직무수행을 하고 있고, 인지재활에 관심 있는 대한인지재활학회 정회원 3,448명을 선정하였다. 연구기간은 2022년 9월부터 2023년 2월까지 이루어졌 다. 이들 중 본 조사에 적극적으로 참여하여 성실하게 답변한 154명의 참가자가 최종 조사대상이다. 조사도구는 선행연구에서 인지재활 발전현황과 문제점 및 향후 발전방안을 델파이 조사를 통해 도출하고 타당성을 갖춘 104개 항목을 5점 리커트 척도로 정량화하여 사용하였다. 결과: 인지재활은 작업치료에서 지속적 발전을 거듭하였다. 법적으로 작업치료 업무범위로 보장을 받았고, 전문성 확보를 위한 전문 교육이 강화되었으며, 인지재활을 시행하는 기관과 치료사가 늘어났다. 그러나 작업수행 기반 인지재활 평가도구와 작업치료 시간 내 평가가능한 평가도구 개발이 필요하다. 제도적으로는 인지재활 의료보험 수가 확대와 인지재활 가이드라인 개발이 필요하다. 임상현장의 작업치료사들은 인지요소별 중재보다 작업수행 기반의 기능인지가 임상현장에서 실현되는 것이 필요하다고 인식하였다. 결론: 인지재활은 작업치료사의 주요 직무이고 지속적으로 발전하였다. 인지재활 발전을 위해 지난 과거부터 해결하지 못하고 난제로 남아있는 의료보험 수가 등의 제도 문제의 해결이 시급하다. 작업치료 현장의 발전을 위해서는 인지평가도구, 중재기술, 기능인지 중심 인지재활 적용 방법에 대한 연구가 필요하다.

PURPOSES : The purpose of this study is to investigate the tendency of material property estimation under different concrete distress conditions and curling conditions when non-destructive tests such as rebound hammer and surface deflection test are applied to concrete pavement. METHODS : Nondestructive tests using Schmidt hammer and Falling Weight Deflectometer were performed to inspect the expressway concrete pavements constructed more than 20 years ago. Some results were compared with core tested elastic modulus and compressive strength. RESULTS : As a result of the rebound test, the section with Alkali-Silica Reaction(ASR) distress was outside the range of the existing estimation formula, but the control section was found to be within the range of the existing estimation formula. As a result of the physical property estimation through deflection test, the section with ASR distress showed greater fluctuations in the estimated material properties and deflection ratio compared to the control section, showing that the ASR damage seems to affect the slab deflection behavior. CONCLUSIONS : The rebound test may not sufficiently reflect the decline in material properties due to concrete damage. The deflection test can obtain results that reflect the deterioration of material properties, but it was confirmed that significant variability may occur, so it seems to necessary to perform complementary indoor core tests with nondestructive testing(NDT) tests.

The consumption of enoki mushrooms has been associated with cases of listeriosis produced by Listeria monocytogenes, highlighting the significance of sanitizing food-contact surface, such as the velcro used in welding processing of enoki mushrooms, to ensure microbial safety. We investigated the inhibitory activity of nine chemical disinfectants at regular concentrations against L. monocytogenes isolated from a mushroom farm environment. The bacterial suspension was prepared in phosphate buffered saline and mushroom extract broth and inoculated onto the velcro surface. After inoculation, most disinfectants reduced the initial 8 log CFU/coupon concentration by less than 2 log CFU/coupon during a 5-min treatment. Slightly acidic hypochlorous water showed a reduction of approximately 4 log CFU/coupon when tested for more than 30 min at the maximum allowable concentration of 200 mg/L. Sodium hypochlorite solution showed a reduction of approximately 5 log CFU/coupon when used at 100 mg/L for 60 min. Peracetic acid, at the maximum allowable concentration of 300 mg/L, showed the most effective reduction of 5 log CFU/coupon or more when the surface was treated with 37.5 mg/L for 30 min. These results indicate that peracetic acid can be used as the disinfectant strategy to control cross-contamination of L. monocytogenes on the velcro surface of plastic wrappers used in the welding processing of enoki mushrooms.

본 연구는 야생조류 생물음향 탐지와 현장 조사의 결과 비교를 통해 효과적인 야생조류 조사 방법을 제시하는데 목적이 있다. 연구대상지는 제주 동백동산과 1100고지 습지였다. 생물음향 탐지 기간은 2020년 12개월간이었다. 생물음향 탐지는 시간당 1분씩, .wav, 44,100Hz 포맷으로 생물음향 측정장비(Song meter SM4)를 각 연구대상지에 설치하여 녹음하였다. 현장 조사는 Banjade et al. (2019)의 ｢제주 동백동산과 1100고지 습지의 조류군집 장기간 동향｣ 결과를 인용하였다. 연구결 과는 다음과 같다. 첫 번째, 생물음향 탐지 기법을 통해 확인된 조류상은 동백동산에서 29과 46종, 1100고지 습지에서 16과 25종이었다. 두 번째, 울음 빈도를 통해 나타난 종 구성은 동백동산에서 직박구리(33.62%), 섬휘파람새(12.13%), 동박새(9.77%) 순으로 나타났고, 1100고지 습지에서 큰부리까마귀(27.34%), 섬휘파람새(19.43%), 직박구리(16.56%) 순으 로 나타났다. 세 번째, 동백동산에서 실시한 현장 조사의 경우 2009년 39종, 2012년 51종, 2015년 35종, 2018년 45종이 조사되었고, 생물음향 탐지를 통해 46종이 확인되었다. 1100고지 습지에서 실시한 현장 조사의 경우 2009년 37종, 2012년 42종, 2015년 34종, 2018년 38종이 조사되었고, 생물음향 탐지를 통해 25종이 확인되었다. 종합적으로 현장 조사를 통해 동백동산에서 확인된 78종 중 43.6%인 34종, 1100고지 습지에서 확인된 47종 중 38.3%인 18종이 생물음향 탐지로 확인되었 다. 네 번째, 현장 조사에서 확인되지 않았지만, 생물음향 탐지를 통해 확인된 종은 동백동산에서 9과 12종, 1100고지 습지에서 3과 7종으로 대표적으로 소쩍새, 솔부엉이와 같은 야행성 조류, 쇠유리새, 울새와 같은 나그네새, 도래하는 개체수가 상대적으 로 적은 황여새, 솔잣새와 같은 겨울철새가 있다. 다섯 번째, 현장 조사에서 확인된 종 중에서 생물음향 탐지를 통해 확인되지 않은 종은 동백동산에서 18과 48종, 1100고지 습지에서 14과 27종으로 대표적으로 백로과, 수리과, 솔딱새과가 있다. 본 연구는 국내에서 생물음향 장비 운용을 통한 조류 연구가 활성화되고 있는 가운데 현장 조사와 생물음향 탐지를 병행했을 때 효과적인 조사를 실시할 수 있다는 기초 자료를 작성했다는 점에서 의미가 있다.

PURPOSES : This study aims to understand the effect of defective dowel bar installation on jointed concrete pavement (JCP), which can cause joint freezing, spalling, cracking, and faulting and finally shorten the lifespan of the pavement. METHODS : A comprehensive field survey was undertaken at an expressway construction site in South Korea to assess dowel bar installation conditions. In addition, finite element (FE) analysis was used to simulate JCP behavior with both vertical and horizontal dowel misalignments. Different temperature conditions, including a change of -55 °C and gradient of -0.1 °C/mm, were integrated into the FE model to examine horizontal slab contraction and simultaneous slab curling. RESULTS : The analysis revealed pronounced slab behaviors under specific temperature changes, particularly when combined with dowel misalignments. The simultaneous effects of horizontal contraction and slab curling owing to temperature changes and gradients became more evident in the presence of dowel misalignments. CONCLUSIONS : The results confirmed that dowel bar misalignment considerably affected the behavior of the JCP, thereby emphasizing the importance of the proper installation of dowel bars.