The purpose of this study is to create a shirt sloper suitable for an elderly male body shape by producing virtual models using a 3D-virtualization program, making a torso prototype using the Yuka CAD system, and employing 3D simulation to virtualize and calibrate the model. First, the following three types of obese dummies are implemented through the CLO 3D program: Type 1 exhibits body fat in the lower body; Type 2 exhibits an obese abdomen; and Type 3 displays a balanced form of obesity. Second, for the design of the shirt pattern, the waist back length (measured value+1), back armhole depth (C/10+12+3+0.5~1.5), front armhole depth (back armhole depth 0~1), front interscye (2C/10‒1+0.5‒0.5), armscye depth (C/10+2+3.5+ 0.5), back interscye (2C/10‒1+1), front chest C (C/4+2.5+1), back chest C (C/4+2.5‒1), front hem C (C/4+2.5+1(+2)), back hem C (C/4+2.5‒1(+2)), cap height (AH/3‒5), and biceps width (Front AH‒1, Back AH‒1) are calculated. Third, the virtual attachment of the shirt pattern is resolved by increasing the front and back armhole depths, and the front and rear wrinkles are improved by adding a back armhole dart. The front hem lift and lateral pull caused by the protrusion of the abdomen are amended by increasing the margin of the chest, waist C, and hip C, with the appearance improved by balanced margin distribution in the front, back, and side panels. The improved retail pattern with an increase in the front armholes C was balanced on the torso plate.

This study presents an efficient clothes-sizing system for those experiencing obesity in old age with the aim of revitalizing the clothing industry for older obese people. The study targets 249 obese men aged 60 to 85 who satisfy a Rohrer index score of 1.6 or higher and a BMI (body mass index) of 25 or higher. Elderly obese males showed more obesity in the body based on the waist. In particular, those in their 60s were the most obese, and after reaching their 70s, characteristics of old age in which the stature was reduced and the limbs were tapered were shown. The clothes-sizing system was set to 5cm in stature, 5cm and 3cm in chest girth, 2cm in waist girth (omphalion), and 2cm in hip girth according to the KS standards. Through the two-way distribution of each section, the name of the section with a high distribution was given. Casual tops were selected from eight sizes, ranging from 155 to 170cm in stature and 95 to 105cm in chest girth. Suit top sizes were selected from eight sizes, ranging from 160 to 170cm in stature and 94 to 103cm in chest girth. Bottoms suggested 10 sizes distributed between 90 and 100cm in waist girth (omphalion) and 92 and 98cm in hip girth. According to the KS standards, the detailed size was divided into the basic part and the reference part.

The purpose of this study is to promote the elderly apparel industry for the increasing numbers of elderly obese male population. In the study, a total number of 249 males between the ages of 60 to 85 were studied to analyze their body types and differences. The group had a Rohrer Index of 1.6 or higher and BMI of 25 or higher. The noticeable physical differences in the group were shorter waist front length, bigger waist and hip circumferences with increasing age and slimmer limbs that are associated with the natural aging process with or without obesity. The obese body types have been classified in the following 3 different categories. Type 1 is the group that has lower body obesity with broad shoulders and relatively slimmer abdomen than a heavy bottom. A total number of 84 people belonged to the type 1 obesity category which makes up 33.8% of the total. Type 2 is the group that has upper body obesity with especially large abdominal obesity. A total number of 76 people, 30.5% of the total, were classified as type 2. Type 3 is the group that has whole body obesity with balanced obesity in the whole body. A total number of 89 people, 35.7% of the total, made up type 3.

The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women’s body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.

The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women’s body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.

The purpose of this study is to propose a specialized clothes-sizing system for elderly (aged 60~79) obese women satisfying the following conditions based on the data from the fifth Korean Agency for Technology and Standards (2004): a Rohrer's index of over 1.6, a BMI of over 25, and a WHR of over 0.85. The lower bodies of elderly obese women tends to be shorter and wider than average. Particularly, their torsos from the chest to the waist tend to be more obese than other areas. According to the KS standards, the clothes-sizing system sets up its size intervals as follows: 5cm in stature, 5cm and 3cm in bust, 3cm in waist, and 3cm in hip. Based on the dualistic distribution of each section, the names of the sections indicating high distribution are suggested. For suit tops, 11 sizes are selected as distributed in the 145-155cm stature section and 91-103cm bust section. For casual tops, nine sizes are selected as distributed in the 145-155cm stature section and 90-105cm bust section. For bottoms, 11 sizes are selected as distributed in the 82-97cm waist section and 91-97cm hip section. According to the KS standards, detailed sizes are suggested in the division of basic and reference areas.

This study analyzed the body-type characteristics of 340 old-aged obese women that had been on the rise as a part of efforts to activate the silver clothing industry. The subjects were in the age range of 60-79 and met some obesity requirements, including a Rohrer Index of 1.6 or higher, a BMI of 25 or higher, and a WHR of 0.85 or higher. Old-aged obese women showed increased thickness of the torso with age, which suggests that they revealed the characteristics of regardless of gender. In other words, they became bigger in the waist and abdomen, shorter in height, slimmer in the lower body, and thicker in the torso. There are three types of obesity: Type 1 is lower-body obesity with a higher degree of obesity in the abdomen than the upper body. Type 2 is abdominal obesity with a higher degree of obesity in the upper body than in the lower body. Type 3 is whole-body obesity with balanced obesity of the whole body. As for changes to the types of obesity according to age, those who are in their sixties usually fall into the categories of upper-body and whole-body obesity, and those who are in their seventies are much more concentrated in the categories of abdominal obesity and upper-body obesity with a decreased percentage of whole-body obesity. It is apparent that the percentage of abdominal and upper-body obesity rises with age due to fat accumulation in the abdomen.