검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 26

        2.
        2021.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The deck area of a ship uses a variety of mechanisms and especially, for handling heavy materials, such as a Windlass, a Davit and a Derrick, a Winch for a deck, which controls by winding a drum with a wire or a rope is mostly used. Since the winch mainly uses a hydraulic system depending on driving characteristics, load-based power consumption is the most important device for this method. Therefore, an experimental study on the effect of energy reduction resulting from the flow rate variation was conducted by applying an inverter control to the deck winch, which is being used in a real training ship. As a result, when the surrounding environment and the driving condition were equal to each other, the maximum reduction and the minimum reduction in power consumption resulting from the flow rate variation excepting the maximum flow rate conditions was 51.8% and 16.1% respectively.
        4,000원
        3.
        2020.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study evaluated the perception, consumption behavior, and optional attributes of Korean, Chinese, and U.S. consumers of energy bar products. Data were compared and analyzed by surveying 300 consumers in each country. Significant differences were observed in preference for energy bars according to their nationality, in the order China, the U.S., and Korea. Perception of taste, types and dietary suitability of the products ranked lower for Korean consumers, as compared to consumers of the United States and China. The order dietary fiber, protein, and calcium were the sought-after nutritional requirements of the products. The demand for protein was significantly higher in the U.S. Calcium demand was low in the United States and China, but was very high in Korea, which could be attributed to the low calcium intake of Koreans. Other optional attributes which were closely associated with the purchase and re-purchase decision, included price, taste and delivery period. All three factors were recognized as important options in Korea, whereas awareness of packaging/ appearance and brand was not. The taste, nutrients and price in the U.S. ranked high as important optional attributes, while the packaging, external and expiration dates were recognized as low. Unlike Korea and the U.S., important optional attributes for Chinese consumers were determined in the order expiration date, taste, and nutrients, and showed low perception for packaging, appearance, weight, counts, and prices. Evaluating the preference for the main and secondary ingredients, Koreans preferred nuts over grains, Americans preferred dried fruits over nuts, and Chinese preferred nuts and grains; both Korean and American consumers had low preference for dried vegetables. The preference for chocolate was low in Korea and China, whereas preference for jelly was high in China as compared to Korea and the U.S. The intention of purchasing energy bars was significantly lower in Korea than in the U.S. and China. A variety of nutritious functional bars have recently been distributed and sold in Korea, but they are mostly produced in the U.S., which is the largest producer and consumer worldwide. Taken together, results of this study indicate that the demand for nutritional enhancement and preferred materials vary according to the nationality. Hence, it is necessary to develop products that reflect these criteria. Further research is required to analyze the relationship between preference and consumption behavior for each material product developed in the future.
        4,000원
        6.
        2019.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Desalination plants are generally studied with higher operating costs compared to water supply facilities. This study was conducted to reduce the cost of water production and to preserve existing water resources. Therefore, the purpose of this study was to utilize the control valves to increase maximum efficiency, thereby reducing the power of the pumps and operating costs. Specific energy consumption was shown to reduce the process operating power by up to 1.7 times from 6.17 to 3.55 kWh/m3 based on seawater reverse osmosis 60 bar. In addition, the water intake process was divided into pre, inter, and post-according to the use method of blasting, and the water treatment process was divided into pre, inter, and post blending. In order to reduce power consumption, the blending process was combined to operate the facility, which resulted in the reduction of power consumption in the order post > pre-inter> inter blending.
        4,000원
        7.
        2019.01 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Experiments of local cooling and heating on crown and root zone of forcing cultivation of strawberry ‘Seolhyang’ using heat pump and root pruning before planting were conducted. During the daytime, the crown surface temperature of the crown local cooling treatment was maintained at 18 ~ 22oC. This is suitable for flower differentiation, while those of control and root zone local cooling treatment were above 30oC. Budding rate of first flower clusters and initial yields were in the order of crown local cooling, root zone local cooling and control in root pruning plantlet and non pruning plantlet, except for purchase plantlet. Those of root pruning plantlet were higher than those of non pruning plantlet. These trends were evident in the yield of the first flower cluster until February 14, 2018, and the effect of local cooling and root pruning decreased from March 9, 2018. The budding rates of the second flower cluster according to the local cooling and root pruning treatments were not noticeable compared to first flower cluster but showed the same tendency as that of first flower cluster. In the heating experiment, root zone local heating(root zone 20oC+inside greenhouse 5oC) and crown local heating(crown 20oC+inside greenhouse 5oC) saved 59% and 65% of heating fuel, respectively, compared to control(inside greenhouse 9oC). Considering the electric power consumption according to the heat pump operation, the heating costs were reduced by 55% and 61%, respectively.
        4,000원
        8.
        2018.11 구독 인증기관·개인회원 무료
        Chlor-alkali (CA) membranes as key materials to generate chlorine gas and sodium hydroxide are composed of sulfonic acid layer (S-layer) and carboxylic acid layer (C-layer) to provide fast sodium ion transport and slow hydroxide ion diffusion, respectively. Aciplex F, a representative CA membrane is made in a double layer form via thermal adhesion of both layers after each single layer film is independently fabricated. Unfortunately, the membrane fabrication induces delamination particularly in their interface as a result of hydroxide ion diffusion occurring during CA operation, leading to rapid increase in electrochemical overpotential. In this study, selective chemical conversion technique was developed to solve the delamination issue. Their effectiveness was proved by applying the same concept to a wide range of PFSA membrane.
        9.
        2018.11 구독 인증기관·개인회원 무료
        Saline water electrolysis (SWE) is an electrochemical technology to directly generate valued chemicals such as chlorine gas (Cl2), hydrogen (H2), and sodium hydroxide (NaOH) by applying electric energy. The key materials in SWE are cation exchange membranes with high selectivity to sodium ions under chemically harsh SWE conditions. The representative SWE membranes are perfluorinated double layered membranes composed of perfluorinated sulfonic acid layer and carboxylic acid layer to transport sodium ions rapidly and to prevent the passage of hydroxide ions, respectively. The commercially available membranes are, however, suffering from delamination issues occurring in their interface. In this presentation, delamination-free membrane fabrication processes will be addressed.
        10.
        2018.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        점차 강화되는 배출가스 규제와 적은 연료로 많은 거리를 주행할 수 있는 고효율 자동차에 대한 요구로 에너지소비효율에 대한 관심이 점차 늘어나고 있다. 국내의 에너지소비효율은 도심주행모드와 고속도로 모드를 주행하여 복합연비로 산정하고 5-Cycle 보정식을 이용하여 최종 에너지소비효율을 표시하고 있다. 에너지소비효율의 경우 카본발란스법에 의하여 산출되는데 이때 배출가스에 의해 계산이 됨에 따라 연소에 사용되는 연료는 자동차 성능과 에너지소비효율에 매우 중요한 역할을 하게 된다. 자동차 연료의 경우 국내에서는 석유 및 석유대체연료 사업법 품질기준에 따라 국내에 유통되고 있는데 정유사의 정제 방법이나 원유에 따라 품질 기준 내에서 물성 차이를 보일 수 있다. 일정 품질기준을 정하고 있음에 따라 연료별 큰 차이는 나지 않을 것으로 보이나 자동차의 성능에는 영향을 미칠 수 있어 그에 따른 연구가 필요한 실정이다. 따라서, 본 연구에서는 시중에서 유통되고 있는 연료 중 여름철에 판매되는 경유를 정유사 직영점을 통해 구매하였으며, 각 시료별 물성을 분석하고 그에 따른 에너지소비효율을 측정하였다. 에너지소비효율의 경우 현행 경유 자동차의 에너지소비효율 산정식과 휘발유 에너지소비효율에서 사용되는 산출식을 이용하여 물성 적용에 따른 변화를 살펴보았다. 그 결과 시료별 밀도는 최대 약 0.9%의 차이를 보였으며, 순발열량은 1.6%의 차이를 보였으며, 현행 에너지소비효율 산출 결과에서는 도심모드에서 약 1%, 고속모드에서 1.4% 차이를 보였다. 휘발유 산출식을 이용한 산출에서는 현행 에너지소비효율 산출때 보다 약 6%정도 낮은 수치를 보였으며, 각 시료별 에너지소비효율은 최대 도심과 고속에서 최대 약 1.4%의 차이를 보였다.
        4,000원
        11.
        2017.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 방울토마토 재배 단동온실에 공기순환팬을 설치하고 공기순환팬이 온실 내 온도 및 습도 분포, 에너지소비량에 미치는 영향을 분석하였다. 공기순환팬은 날개 크기 230mm의 Stainless 팬으로, Lee 등(2016)의 연구결과를 참고하여 시험구 온실에 9m 간격으로 총 18 대를 설치하였다. 온실 내부 온습도는 온실 길이방향으 로 4등분하여 1/4 지점과 3/4 지점의 중앙에 센서를 설치하고 0.8m, 1.8m 높이 2곳의 온습도를 난방을 주로 하는 야간(오후 6시~다음 날 오전 7시)에 5분 간격으로 측정하였다. 에너지소비량은 각 온실에 위치한 온수펌프의 유량, 온수 출수부와 환수부의 온도차를 측정하여 계산하였다. 공기순환팬을 사용하지 않았을 때 측점 간 온도차 및 습도차의 평균값은 0.75oC, 2.19%였으며 공기 순환팬 사용 시 측점 간 온도차 및 습도차의 평균값은 0.42oC, 1.27%로 감소하였다. 공기순환팬 설치 온실과 미설치 온실의 누적 에너지소비량은 각각 4,673kWh, 4,009kWh로 공기순환팬 설치 온실에서 약 14.2%의 에너지를 적게 소모하였다. 이러한 결과로 보아 온실 내 공기순환팬 사용은 공기를 지속적으로 교반시켜 주어 온실 전체의 온도 및 습도를 균일하게 만들고, 공기의 온도가 빠르게 변하지 않도록 해주어 난방 장치의 가동 시간과 에너지소비량을 줄일 수 있다.
        4,000원
        12.
        2016.05 구독 인증기관·개인회원 무료
        전 세계적으로 대두되고 있는 물 부족 현상을 해결하기 위하여 하수재이용과 해수담수화 공정의 관심이 높아지고 있다. 특히, 정삼투-역삼투 융합공정은 해 수를 유도용액으로, 하수처리수를 유입수로 하여 정삼투 공정에서 유도용질의 회수 없이 희석된 해수를 역삼투 공정을 통해 하수재이용과 해수담수화를 동시 에 달성할 수 있는 공정으로 최근 각광받고 있다. 이 융합공정은 정삼투 공정과 역삼투 공정의 단점을 상호 보완하는 저에너지 공정으로 차세대 해수담수화 시장을 이끌어 나갈 것으로 판단된다. 따라서, 본 연구에서는 정삼투, 역삼투 막의 특성과 융합공정의 운영인자를 반영한 공정모사를 통하여 정삼투-역삼투 융합 공정의 소비에너지를 최소화 시킬 수 있는 최적 운영조건을 도출하고자 하였다.
        13.
        2013.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear during fishing operation is generally related to hydrodynamic resistance on the gear. This research demonstrates a new approach using numerical methods to reduce fuel consumption. The results from the simulation were verified with results that mirrored the model experiments. By designing the fishing gear using drawing software, the whole and partial resistance force on the gear can be calculated as a result of simulations. The simulation results will suggest suitable materials or gear structure for reducing the hydrodynamic forces on the gear while maintaining the performance of the gear. Furthermore, the efficiency of low energy used anchovy dragnet as economic point of view will be dealt. This research will helpful to reduce the GHG emissions from fishing operations and lead to reduce fishing costs due to fuel savings.
        4,500원
        14.
        2013.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서 사용한 QRD(Quadratic Residue Diffusor) 마이크로파는 일반적인 마이크로파와 달리 파장의 위상차를 변화시켜 균일한 살균을 유도할 수 있어 저전력으로 효과를 높일 수 있는 새로운 기술로 알려져 있다. 따라서 친환경적이고 에너지 소비가 적은 QRD 마이크로파를 이용하여 식물공장에 이용되고 있는 배지를 멸균할 수 있는 가능성에 대한 기초적인 연구를 수행하여 얻은 결과는 아래와 같다. 마이크로파의 조사 출력에 따른 배지의 외적변형은 배지 내의 수분의 함유량과 마이크로파 출력을 2~8kW까지에서 우레탄스폰지와 암면은 외적변형이 전혀 일어나지 않은 것으로 확인되었다. 그러나 PDA고체배지는 2kW 출력에 60초와 180초에서는 배지가 녹지 않았고, 그 외 처리에서는 전부 배지가 녹았다. Bacillus sp.와 Burkholderia sp.에서 마이크로파의 조사 출력과 처리시간에 따른 균주 표면 온도는 차이가 나타났다. 마이크로파의 조사 출력과 처리시간에 따른 균주 멸균 실험은 마이크로파의 출력 2kW에서 시간과 관계없이 Bacillus sp.와 Burkholderia sp.는 모두 자라고 있는 것을 확인하였고, 마이크로파의 출력 6kW에서는 Burkholderia sp.의 60초 처리를 제외한 모든 실험구에서 멸균되었으며, Bacillus sp.는 모든 실험구에서 사멸되었다. 마이크로파의 출력 8kW에서 시간과 관계없이 Bacillus sp.와 Burkholderia sp.는 모두 멸균되었음을 확인하였다. 균주를 각각의 배지에 오염시킨 후 마이크로파를 처리한 배지 내의 온도는 처리시간 60초 지난 뒤에는 우레탄스폰지와 암면배지에서의 온도가 100℃ 이상으로 유지되어 대체로 60초 부터 멸균이 가능한 것으로 판단되었다. 따라서 식물공장내에 가장 문제가 되고 있는 Bacillus sp.와 Burkholderia sp.는 본 실험에서 사용된 QRD 마이크로파로 충분히 멸균될 수 있을 것이라 판단된다.
        4,000원
        15.
        2013.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Most of steam power plant in Korea are heating the feed water system to prevent freezing water flowing in the pipe in winter time. The heating system is operated whenever the ambient temperature around the power plant area below 5 degree Centigrade. But this kind of heat supplying system cause a lot of energy consuming. If we think about the method that the temperature of the each pipe is controled by attaching the temperature measuring sensor like RTD sensor and heat is supplied only when the outer surface temperature of the pipe is under 5 degree Centigrade, then we can save a plenty of energy. In this study, the computer program package for simulation is used to compare the energy consumption load of both systems. Energy saving rate is calculated for the location of Youngweol area using the data of weather station in winter season, especially the January' severe weather data is analyzed for comparison. Various convection heat transfer coefficients for the ambient air and the flowing water inside the pipe was used for the accurate calculation. And also the various initial flowing water temperature was used for the system. Steady state analysis is done previously to approximate the result before the simulation. The result shows that the temperature control system using RTD sensor represents the high energy saving effect which is more than 90% of energy saving rate. Even in the severe January weather condition, the energy saving rate is almost 60%.
        4,000원
        16.
        2012.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear during fishing operation is generally related to hydrodynamic resistance on the gear. This research demonstrates a new approach using numerical methods to reduce fuel consumption. The results from the simulation were verified with results that mirrored the model experiments. By designing the fishing gear using drawing software, the whole and partial resistance force on the gear can be calculated as a result of simulations. The simulation results will suggest suitable materials or gear structure for reducing the hydrodynamic forces on the gear while maintaining the performance of the gear. Furthermore, the efficiency of low energy used trawl as economic point of view will be dealt. This research will helpful to reduce the GHG emissions from fishing operations and lead to reduce fishing costs due to fuel savings.
        4,500원
        17.
        2012.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study suggests a personalized algorithm of physical activity energy expenditure prediction through comparison and analysis of individual physical activity. The research for a 3-axial accelerometer sensor has increased the role of physical activity in promoting health and preventing chronic disease has long been established. Estimating algorithm of physical activity energy expenditure was implemented by using a tri-axial accelerometer motion detector of the SVM(Signal Vector Magnitude) of 3-axis(x, y, z). A total of 10 participants(5 males and 5 females aged between 20 and 30 years). The activities protocol consisted of three types on treadmill; participants performed three treadmill activity at three speeds(3, 5, 8 km/h). These activities were repeated four weeks.
        4,000원
        18.
        2012.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Four different buildings having various wall construction are analyzed for the effect of wall mass on the thermal performance and inside building air and wall temperature transient and also for calculating the energy consumption load. This analytical study was motivated by the experimental work of Burch et al. An analytical solution of one-dimensional, linear, partial differential equations is obtained using the Laplace transform method, Bromwich and modified Bromwich contour method. A simple dynamic model using steady state analysis as simplified methods is developed and results of energy consumption loads are compared with results obtained using the analytical solution. Typical Meteorological Year data are processed to yield hourly average monthly values. This study is conducted using weather data from two different locations in Korea: Daegu having severe weather in summer and winter and Jeju having mild weather almost all year round. There is a significant wall mass effect on the thermal performance of a building in mild weather condition. Buildings of heavyweight construction with insulation show the highest comfort level in mild weather condition. A proportional controller provides the higher comfort level in comparison with buildings using on-off controller. The steady state analysis gives an accurate estimate of energy load for all types of construction. Finally, it appears that both mass and wall insulation are important factors in the thermal performance of buildings, but their relative merits should be decided in each building by a strict analysis of the building layout, weather conditions and site condition.
        4,000원
        20.
        1999.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        이산화탄소는 기후변화를 야기시키는 주요 온실가스이다. 본 연구는 춘천시, 강릉시, 서울시 강남구 및 중랑구를 대상으로 토지이용유형별 식생관리에 기인한 에너지소비 및 탄소방출을 잔디깎기, 전정, 관수, 시비, 살충제시용 등의 식생관리실태를 면담설문 및 일부 실측을 통해 파악하였다. 동일 토지이용유형 내 식생관리강도는 대체로 도시간 및 구간 통계적으로 유의한 차이가 없었다. 수목관리에 의한 연간 총탄소방출량은 토지이용유형에 따라 단위피도면적당 36.0~209.7g/m2로서 교통용지에서 가장 많았다. 잔디관리에 의한 연간 총탄소방출량은 단위잔디면적당 7.4~69.3g/m2로서 공원에서 가장 많았다. 이들 총탄소방출량 중 수목의 경우 전정이 토지이용유형에 따라 96.8~99.7%를, 잔디의 경우 잔디깎기가 91.9~100%를 각각 차지하였다. 도시식생의 연간 순탄소흡수를 최대화하기 위해서 가로수의 전정과 공원 내 잔디깎기에 의한 탄소방출을 최소화할 식재계획 및 관리가 요구된다.
        4,000원
        1 2