검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 13

        1.
        2022.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A strain of Alexandrium species was established by isolating cells from Jangmok Bay, Korea. Its morphology and molecular phylogeny based on LSU rRNA gene sequences were examined. In addition, growth responses of this Alexandrium species to changes in temperature, salinity, and nutrient concentrations were investigated. This Alexandrium species from Jangmok Bay had a ventral pore on the 1′, which was morphologically consistent with previously described Alexandrium tamarense and A. catenella. Phylogenetic analyses revealed that this isolate was assigned to A. pacificum (Group IV) within A. tamarense species complex. In growth experiments, relatively high growth rates and cell densities of A. pacificum (Group IV) were observed at 15°C and 20°C. This species also grew under a wide range of salinity. This indicates that this Korean isolate of A. pacificum (Group IV) is a stenothermic and euryhaline species. In growth responses to changes in nutrient levels, enhanced growth rates and cell densities of A. pacificum (Group IV) were observed with additions of nitrate and phosphate. In particular, rapid uptakes of phosphate by A. pacificum (Group IV) were observed in experimental treatments, indicating that the increase in phosphate concentration could stimulate the growth of A. pacificum (Group IV).
        4,200원
        2.
        2019.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The toxic dinoflagellate Gymnodinium catenatum isolated from the southern coast of Korea was described under light and scanning electron microscopy, and its large subunit (LSU) rDNA was sequenced. In addition, the effects of temperature and salinity on its growth were investigated. The cells of G. catenatum, as viewed under the electronic microscope, were green-brown color, 38.1-77.4 μm in length and 26.1-40.8 μm in width. The epicone was conical, while the hypocone was trapezoidal. The nucleus was located at the central part of the cell. The apical groove was horseshoe-shaped and small pores were irregularly distributed on the cell surface. Molecular phylogeny based on LSU rDNA gene sequences showed that the Korean G. catenatum and previously reported species formed a monophyletic clade within Gymnodinium sensu stricto clade. The maximum growth rate of 0.37 day-1, was obtained at 25°C and 35 psu, and the maximum cell density of 1,073 cells mL-1, was observed at 20°C and 25 psu. However, G. catenatum did not grow at temperature <15°C and <30°C. These results suggest that environmental conditions of summer and autumn in the southern coast of Korea may be favorable for the growth of G. catenatum.
        4,200원
        3.
        2018.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Vortex tubes are simple tubes that can separate hot and cold air from compressed air without any internal device configuration and are used in many industries. If the vortex tube with these advantages is applied to an air conditioning system, it will be free from the use of refrigerant. In this study, basic study on discharge flow rate and temperature separation characteristics was carried out by varying the number of generator nozzle hole in various shapes of the vortex tube according to the inlet pressure of the vortex tube. Experimental results show that as the number of nozzles increases, the discharge flow rate tends to decrease and the temperature separation characteristics were excellent in the number of nozzles 6~7.
        4,000원
        4.
        2017.04 구독 인증기관·개인회원 무료
        본 연구는 배럴온도와 전분함량이 분리대두단백(soy protein isolate)의 조직화 및 물리적 특성에 미치는 영향을 분석하기 위해 스크루 회전속도 250 rpm, 수분함량을 60%로 고정시키고, 배럴온도 130, 140, 150°C, 전분함량 0, 10%로 조절하였다. 압출성형한 후 비기계적 에너지 투입량, 팽화특성, 수분흡수력, 조직감, 조직잔사지수, 색도를 측정하였다. 전분함량이 증가할수록 비기계적 에너지 투입량은 증가하였고, 배럴온도가 증가할수록 감소하는 경향을 보였다. 팽화율은 전분함량과 배럴온도가 증가할수록 증가하였고, 비길이는 전분함량과 배럴온도가 증가할수록 감소하였다. 또한 조각밀도는 전분함량이 증가할수록 감소하였다. 전분함량 0%에서 배럴온도가 130, 140, 150°C로 증가할수록 조각밀도는 각각 0.78±0.06, 0.84±0.05, 0.75±0.04 g/cm³이였다. 색도는 전분함량 0%에서 배럴온도가 130°C일 때, 가장 낮은 명도(66.17±0.08)을 나타내었다. 색도차는 전분함량 10%, 배럴온도 150°C일 때, 19.46±0.12로 기존 원료의 색도와 차이가 가장 적었다. 수분흡수력은 전분함량 10%, 배럴온도 150°C일 때, 6.71±0.28으로 가장 높았으며, 배럴온도가 증가할수록 수분흡수력은 증가하는 경향을 보였다. 탄성력과 응집력은 양의 상관관계를 보였으며, 전분함량 10%, 배럴온도 150°C일 때, 탄력성과 응집성이 각각 79.43±1.30, 69.68±2.29%로 가장 높은 값이었다. 배럴온도와 전분함량이 증가할수록 탄력성과 응집성 모두 증가하는 경향을 보였다. 전분함량 0%에서 10%로 증가하였을 때, 조직잔사지수가 증가한 값을 보여주었다. 전분함량 10%, 배럴온도 140°C일 때, 가장 높은 조직잔사지수(15.88±4.30%)를 나타내었다. 결론적으로 전분이 첨가된 것이 조직결착력뿐만 아니라 탄력성과 응집성 같은 조직감을 향상시킨 것을 확인할 수 있었다.
        5.
        2016.05 구독 인증기관·개인회원 무료
        Graphene oxide (GO), a highly oxidized graphene sheet, is a distinguished 2-D nanosheet. GO membranes exhibit good CO2 separation properties due to its various polar functional groups with oxygen resulting in high CO2 sorption properties. Recently, GO nanosheets have been incorporated into polymer membranes expecting the synergistic effect. There is, however, little research on GO as a crosslinker even though it has high potential due to available functional groups for further reaction. Here, we prepared GO/polymer membranes by crosslinking reactions between polar groups of GO and bi-functional polymer matrix at different temperatures. Optimum crosslinking condition was found by analyzing gas transport, chemical properties of samples. Degree of crosslinking in GO/polymer nanocomposites affected gas transport behavior.
        6.
        2016.04 구독 인증기관·개인회원 무료
        수분함량과 사출구 온도, 스크루 회전속도가 분리대두단백의 조직화 및 물리적 특성에 미치는 영향을 분석하였다. 압출성형 조건은 스크루 회전속도를 250 rpm으로 고정하고, 수분함량과 사출구 온도를 20, 25% 와 120, 130, 140℃로 조절하였다. 또 다른 압출성형은 수분함량과 사출구 온도를 30%와 140℃로 고정하고 스크루 회전속도를 150, 200, 250, 300, 330 rpm으로 조절하였다. 사출구 온도가 120℃에서 140℃로 증가함에 따라 비기계적 에너지 투입량은 감소 하였으며 스크루 회전속도가 150 rpm에서 330 rpm으로 증가할수록 비기계적 에너지 투입량은 증가하였다. 사출구 온 도가 증가하고 수분함량이 감소할수록 직경팽화율과 비길이는 증가하였으며 밀도는 수분함량 20%에서 유의적인 차 이를 보이지 않았다. 사출구 온도가 증가하고 수분함량이 감소할수록 기공형성이 증가하여 파괴력이 감소하였으며 사 출구 온도 140℃, 수분함량 20%에서 2.07E+04 N/m 2로 가장 낮은 값을 보였다. 수분함량이 25%에서 20%로 감소하면 서 갈변으로 인해 총색도차는 감소하였고 스크루 회전속도가 150 rpm에서 330 rpm으로 증가할수록 총색도차가 증가 하였다. 조직잔사지수는 사출구 온도가 증가하고 수분함량이 낮을수록 증가하였으며, 사출구 온도 140℃, 수분함량 20%에서 26.21 ± 4.28%로 가장 높은 값을 보였다. 스크루 회전속도는 250 rpm에서 높은 조직잔사지수를 보였다. 사출 구 온도가 120℃에서 140℃로 증가하고 수분함량이 25%에서 20%로 감소할수록 수용성 질소지수는 증가하였으며 수 분함량 20%, 사출구 온도 140℃에서 9.72 ± 0.62%로 가장 높은 값을 보였다. 스크루 회전속도가 330 rpm에서 150 rpm 으로 감소함에 따라 수용성 질소지수는 감소하였으며 150 rpm에서 4.26 ± 0.81%로 가장 낮은 값을 보였다. 본 연구를 통하여 수분함량이 분리대두단백 고조직화의 가장 중요한 인자임을 알 수 있었다.
        7.
        2012.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        중공사 고분자 분리막을 이용한 SF6를 분리 농축을 위한 운전조건을 결정하기 위해서는, 온도와 압력이 투과특성에 미치는 영향에 관한 연구가 필요하다. 본 연구에서는 다양한 온도와 압력이 부과된 조건에서 단일기체 투과실험을 수행하여, 중공사 고분자 분리막(PSF, PC, PI)을 통한 기체(N2, O2, SF6, CF4)의 투과특성을 연구하였다. 실험결과, 기체의 투과플럭스는 온도와 압력의 증가에 따라 일반적으로 증가하는 것으로 나타났으나, 분리막에 따른 투과플럭스의 차이가 관찰되었으며, 온도, 압력에 따른 투과플럭스 변화율은 기체의 특성(분자크기)에 따라 다른 것으로 나타났다. 온도 압력에 대한 투과플럭스를 3차원적으로 표현했을 때, 투과플럭스는 근사적인 평면 위에서 변화하는 것으로 관측되었다. 온도와 압력에 의한 투과플럭스 변화를 열역학적으로 분석하였으며, 투과플럭스 예측을 위한 경험적 모델로 평면특성의 1차 다항식 모델과 곡면 특성을 가진 2차 다항식 모델을 제안하였다. 그 결과 두 경험적 모델 모두 관측자료에 대한 높은 적합도를 보여 적용가능성을 확인하였다.
        4,300원
        9.
        2009.03 구독 인증기관 무료, 개인회원 유료
        An evaluation of the concrete strength has very important meaning in the maintenance and the structural safety. The reliability of ferroconcrete building is weakening and enlarging the life is strongly demanded due to the early deterioration of concrete. Like this social demand, concrete strength presumption is being indirectly executed using the result in parallel with the concrete pouring by material age. This data is usually different as concrete poured practically and the way of hardening and curing. Although existing concrete strength presumption formula is proposed, the material used and the concrete strength is different. And as a matter of remicon, the concrete strength varies according to the site and the way of curing. So the objective of this research is strength evaluation of the structural body concrete according to the concrete pouring and curing temperature change seasonally after using the system which evaluates the structural body concrete strength which is applied the transparent junction-separation mold that is presented. Also there is an objective to present the fundamental data for the constructional quality technique proposal of the structural body concrete developed in relation to field specimen and the strength evaluation method by non-breaking.
        4,000원
        10.
        1997.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        여과제균한 배추즙에 김치에서 분리한 7주의 젖산균을 단독 접종하고 10℃, 20℃, 30℃ 및 40℃에서 배양하면서 각각의 증식곡선을 작성하고, 이를 이용하여 각 배양온도에서의 유도시간과 세대시간을 구하였다. 30℃에서 배양할 때의 유도시간은 Leu. mesenteroides subsp. dextranicum은 168분, Leu. mesenteroides subsp. mesenteroidess는 204분. Leu. paramesenteroides은 612분, Lac. bavaricus은 258분, Lac. homohiochii는 228 분, Lac. plantarum는 270 분 그리고 Lac. brevis는 264분이었고, 세대시간은 Leu. mesenteroides subsp. dextranicum 및 Leu. mesenteroides subsp. mesenteroides는 36분, Lac. bavaricus는 33분, Lac. homohiochii는 39분, Lac. plantarum는 66분, Lac. brevis는 42분 그리고 Leu. paramesenteroidse는 162부이었다. 배양온도를 30℃에서 10℃로 낮출 때 모든 균주들의 유도시간과 세대시간이 크게 연장되었는데, 이러한 연장은 Lac. plantarum에서 더욱 현저하게 나타났다. 10℃, 20℃ 및 30℃에서는 Leu. mesenteroides subsp. mesenteroides의 유도시간과 세대시간이 Lac. plantarum의 그것보다 더 짧았다. 그러나 40℃에서는 이러한 양상이 완전히 전도되었다. 전반적으로 보아 배양온도가 낮아질수록 Leu. mesenteroides subsp. mesenteroides의 증식에 상대적으로 더 유리하였고, 배양온도가 높아질수록 Lac. plantarum 의 증식에 상대적으로 더 유리하였다.
        4,000원
        11.
        1994.01 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Laboratory experiments were conducted to investigate the effect of digestion temperature on the settleability and dewaterability of anaerobically digested sludge. The digesters were operated at a hydraulic retention time of 20 days with a loading rate of 0.63~0.66kg volatile solids per cubic meter per day at the temperature of $35^{\circ}C$ and $55^{\circ}C$. A mixed primary and secondary municipal sludge was used as a feed. The interface height of the sludge during settling test was recorded to identify settleability. As a measure of dewaterability of the sludge, specific resistance and capillary suction time were also measured with and without chemical conditioning. Higher digestion efficiency was obtained at $55^{\circ}C$ than $35^{\circ}C$. However, the settleability and dewaterability of the sludge at $35^{\circ}C$ were quite higher than those of the sludge digested at $55^{\circ}C$. The optimum dosages of ferric chloride for sludge conditioning were 0.4% and 0.6% at $35^{\circ}C$ and $55^{\circ}C$, respectively. The filtrate COD of the sludge digested at $55^{\circ}C$ was higher than at $35^{\circ}C$, which means that poor dewaterability of the sludge result in high filtrate COD.
        4,000원
        12.
        2015.12 KCI 등재 SCOPUS 서비스 종료(열람 제한)
        The microbial composition in Nuruk, a Korean cereal fermentation starter, is a critical factor for the quality and organoleptic properties of traditional alcoholic beverages. This study was aimed at monitoring the compositional change and enzyme activity of culturable lactic acid bacteria (LAB) in two types of Nuruk fermented at different temperatures. All culturable LAB were isolated at various time points (0, 3, 6, 10, 20, and 30 days) and identified by 16S rRNA sequencing. In traditional Nuruk type A (TN-A), which was fermented at 36℃, the population of total culturable LAB during the fermentation period was between 104 and 105 log CFU/mL. On the other hand, the LAB population in traditional Nuruk type B (TN-B) fermented at 45℃ (primary fermentation for 10 days) and 35℃ (secondary fermentation for 20 days) was 102 log CFU/mL; however, these bacteria could not be detected after 6 days. Major LAB strains were identified in both Nuruk types: (1) from the MRS-culture of TN-A, Pediococcus pentosaceus at 3-30 days; (2) from MRS-culture of TN-B, P. pentosaceus at 3 days and Enterococcus hirae at 6 days. The protease activities of the dominant LAB isolated from the TN-A and TN-B cultures were within the ranges of 0.64~1.03 mg/mL and 0.74~0.81 mg/mL (tyrosine content), respectively, whereas the α-amylase activities were 0.75~0.98 mg/mL and 0.78~0.79 mg/mL (amylose content), respectively.