우리나라에서 공용중인 시설물은 총 172,111개로 집계되고 있으며, 그 중 교량은 34,199개로 사회 기반시설 중 가장 많은 비중을 차지한다. 이러한 교량은 공용하중, 온도, 습도 등에 의해 거더간 신축 량이 발생하게 되고 신축량 발생으로 인한 유간거리에 대해 차량의 통행 안정성 및 주행성 확보를 위 한 신축이음장치를 설치하게 된다. 신축이음장치를 설치하여 차량의 통행 안정성 및 주행성을 확보할 수 있지만 누수 및 퇴적물 낙하 등을 직접적으로 방지하지 못하여 고무지수재를 별도로 설치하게 된 다. 하지만 이러한 고무지수재는 다양한 원인에 의해 쉽게 손상이 발생한다. 손상된 고무지수재를 통 해 거더의 부식, 교량하부 인명사고 등 다양한 2차 피해가 발생할 수 있다. 피해방지를 위한 교량의 유지관리를 지속적으로 수행하고 있지만 고무지수재 특성상 지속적인 교체가 불가피한 실정이다. 따라 서 본 연구에서는 기존 신축이음장치에 활용되는 고무지수재의 문제점을 해결하기 위하여 초탄성 형 상기억합금을 활용한 새로운 지수재 개발 연구를 수행하였다. 이에 대해 초탄성 형상기억합금 지수재 와 고무지수재에 대한 유한요소해석을 수행하고 비교 및 분석하였으며, 하중 제거 후 원형으로 복원되 는 효과를 통해 지속 사용 가능한 지수재 연구를 검증하였다.

하천시설물은 정보의 관리주체가 국가하천과 지방하천 등에 따라 달라서 통합되어 관리되지 못하고 있는 점, 설계 및 시공 단계의 정보화 축적이 미흡하여 시설물 정보의 망실이 우려되는 점 등 하천분야로 BIM 도입을 하기 위해서는 해결해야 할 과제들이 산재해 있다. 또한, 이로 인해 유지운영단계에서의 시설물 정보 활용 수준 역시 상당히 미흡한 편이다. 따라서, 하천시설물의 효과적인 유지 운영을 위해서는 표준분류체계에 따라 시설물 정보를 정리함으로 데이터의 일관성을 확보하고 효율성을 증대시킬 필요가 있다. 본 연구에서는 이러한 하천분야의 시설물 특성을 고려하여 하천분야의 BIM 정보모델 도입과 3차원 기반의 하천시설의 효율적인 유지 운영 전환을 위한 BIM 표준분류체계를 적용하는 방안을 제시한다.

국내에서 공용중인 교량은 33,177개로 사회기반시설 중 가장 많은 비중을 차지한다. 이러한 교량은 공용하중, 온도, 습도 등에 의해 거더에 신축량이 발생하게 되고, 거더간 유간거리에 대한 안정성을 확보하기 위해 신축이음장치를 설치한다. 신 축이음장치에는 교량의 누수 및 퇴적물 낙하 등을 방지하기 위해 고무지수재를 설치하는 것이 일반적이다. 하지만 이러한 고무 지수재는 다양한 원인에 의해 쉽게 손상이 발생하게 된다. 손상된 고무지수재를 통해 거더의 부식, 교량하부 인명사고 등 다양 한 2차 피해가 발생할 수 있다. 이러한 피해를 예방하기 위해 교량의 유지관리를 수행하고 있지만 고무지수재 특성상 지속적인 교체는 불가피한 실정이다. 따라서 본 연구에서는 기존 신축이음장치에 활용되는 고무지수재의 문제점을 해결하기 위하여 초탄 성 형상기억합금을 활용한 새로운 지수재 개발 연구를 수행하였다. 초탄성 형상기억합금 지수재에 대한 유한요소해석을 수행 및 분석하였으며, 복원 효과를 통해 지속 사용 가능한 지수재 연구를 검증하였다.

In order to find out the management and sanitation status of protective gear provided at the construction site, a case study and survey were conducted by visiting the site. As a result of the case study, inspection and management, disinfection, and storage of protective equipment were insufficient in both workplaces with less than 50 employees and workplaces with more than 100 employees. As a result of the survey, workers(66.2%), said they did not know how to identify hard hats(67.6.%), how to identify bad hard hats(60.8%), and how to identify bad safety belts (73.0%), even though workers(66.2%) were educated on protective gear, and those in charge of protective gear Non-specified(56.8%), regular inspection of the provided protective equipment was not performed(82.4%), and disinfection was not performed(90.5%). Therefore, as a management plan to maintain the performance of personal protective equipment, educational aspects, regular training on protective equipment, training on how to identify defective protective equipment, management of recording papers, technical aspects, strengthening of standards for placement of dedicated safety managers in small workplaces, participation of workers’ representatives when selecting protective equipment, and selection of protective equipment for workers Providing opportunities, administrative aspects of protective equipment regulation and management, introduction of sanitary and cleanliness system, and selection of personnel in charge of protective equipment management were suggested.

최근 건설시장에 4차 산업혁명기술의 급속한 확산과 도입, 적용이 트랜드로 부각되고 있다. BIM 기술은 4차 산업혁명 기술의 근간을 이루는 다차원 정보체계이다. 이러한 정보기반체계를 활용한 하천분야도 유지관리를 위한 현행화 방안 등 적극적인 연구검토가 되고 있다. 최근 하천 전문가들의 하천분야 BIM도입 효과에 필요성을 반영하여 적극적인 연구와 현행화 작업을 해야 된다. 그리고 첨단기술을 반영한 시설물 유지관리 정보체계를 활성화하고 관리계획 수립 및 운영을 위해서는 다양한 정보체계를 구축하기 위한 도구 및 지원소프트웨어의 개발이 반드시 필요할 것으로 전망된다. 하천시설의 유지운영을 위한 연구로 기본적으로 기존 도면자료를 이용하여 3차원 정보모델을 구축하고 이를 활용한 손상을 점검하고 정보화하며 보수보강을 위한 자료로 활용토록 하는 것이다. 이는 기존 도면방식에 없는 정보체계를 하천시설물을 3D 모델링과 함께 유지관리정보를 속성으로 구축하는 방법을 연구하여 유지운영을 위한 점검, 손상 관리를 보다 효과적이고 활용성이 높은 관리방안을 제시하고자 하였다.

PURPOSES : The aim of this study is to determine the maintenance costs for a reasonable preliminary feasibility study, feasibility study, or evaluation METHODS : This study was based on government budget execution and budget execution data for expressways, national highways, cable-supported bridges and long-tunnels. For the expressway, data obtained from the Korea Expressway Corporation were used. For the national highway, data was obtained from the Ministry of Land, Infrastructure and Transport. Similarly, data collected from expressway maintenance costs and the Korea Infrastructure Safety and Technology Corporation were used for long tunnels and cable-supported bridges, respectively. The items for highway maintenance cost were reclassified more rationally to facilitate the calculation of the maintenance costs. The replacement cycle for each item was also calculated based on the budget expenditure data. RESULTS : The results of this study showed the standard maintenance cost model for expressways, national highways, cable-supported bridges, and long-tunnels. In other words, a basis for predicting reasonable maintenance costs was prepared for a feasibility study. CONCLUSIONS : The reliability of the maintenance cost results was improved and it was more consistent with actual costs compared to the results of previous studies. It can be used as a basis for estimating the maintenance cost of a preliminary feasibility study and feasibility evaluation in the future.

국내 고도성장기 이후 본격 건설되기 시작한 사회 기반 시설물은 노후화가 빠르게 진행되고 있다. 특히 사고 발생 시 대량 인명 피해로 직결될 수 있는 교량, 터널 등의 대형 구조물에 대한 안전성 평가가 필요하다. 하지만 기존의 유선 센서 기반의 Structural Health Monitoring(SHM)을 개선한 무선 스마트 센서 네트워크는 짧은 신호 도달거리로 인해 경제적이고 효율적인 시스템 구축이 힘들다. 따라서 LoRa LPWAN 시스템은 사물인터넷의 확산과 더불어 저전력 장거리 통신이 각광을 받고 있으며, 이를 구조 건전성 모니터링에 응용함으로써 경제적이면서도 효율적인 모니터링 시스템 구축이 가능하다. 본 연구에서는 LoRa LPWAN 기반의 무선 계측센서 기술 동향을 조사하였으며, LoRa LPWAN 기반의 무선 계측센서 설치 및 유지관리 방안을 제안한다.

The study seeks to cooperate with the investigation of a fire investigation based on public-private partnership. Fire protection systems provide a wide variety of viewpoints from the perspectives of design, construction, management, maintenance, maintenance and maintenance systems at a particular point in time, construction, management, and maintenance systems. What is controversial is that there are illegal activities such as illegal activities of the Patent Office, misconduct of construction work and unreasonable construction of construction works.As a theoretical framework, the present study identified the four key elements of a successful disaster response system : responsiveness, control, professionalism, and bias.

The definition of an apartment is a building more than 5 stories high and which is the standard law. Currently, the number of apartments is increasing much faster than detached houses. Owning an apartment is a normal trend these days. However, the increasing number of apartments has been increasing the number of apartment fires which also has been making social problems. Therefore, this study was conducted for the fire extinguisher among other fire facilities because it is important for initial fire suppression. The research subject is on the fire extinguisher that is in the underground parking lot of 40 apartment complexes which are more than 10 stories. Survey and analysis were conducted for 80 fire extinguishers. There are two fire extinguishers for each apartment. The result of this study is that all installed fire extinguishers are ABC dry chemical type, 92% of them is 3.3kg and that meet the legal height(less than 1.5m). However, the condition such as appearance, inspection, manufactured year, appearance of signs, material of signs, size of signs, etc. was insufficiency. So improvement of law and system that are fire facility construction, maintenance implementation and additional designation of type approval about sign will be needed in my opinion.

PURPOSES : This study aims to examine the differences between the existing traffic demand forecasting method and the traffic demand forecasting method considering future regional development plans and new road construction and expansion plans using a four-step traffic demand forecast for a more objective and sophisticated national highway maintenance. This study ultimately aims to present future pavement deterioration and budget forecasting planning based on the examination. METHODS: This study used the latest data offered by the Korea Transport Data Base (KTDB) as the basic data for demand forecast. The analysis scope was set using the Daejeon Metropolitan City’s O/D and network data. This study used a traffic demand program called TransCad, and performed a traffic assignment by vehicle type through the application of a user equilibrium-based multi-class assignment technique. This study forecasted future traffic demand by verifying whether or not a realistic traffic pattern was expressed similarly by undertaking a calibration process. This study performed a life cycle cost analysis based on traffic using the forecasted future demand or existing past pattern, or by assuming the constant traffic demand. The maintenance criteria were decided according to equivalent single axle loads (ESAL). The maintenance period in the concerned section was calculated in this study. This study also computed the maintenance costs using a construction method by applying the maintenance criteria considering the ESAL. The road user costs were calculated by using the user cost calculation logic applied to the Korean Pavement Management System, which is the existing study outcome. RESULTS : This study ascertained that the increase and decrease of traffic occurred in the concerned section according to the future development plans. Furthermore, there were differences from demand forecasting that did not consider the development plans. Realistic and accurate demand forecasting supported an optimized decision making that efficiently assigns maintenance costs, and can be used as very important basic information for maintenance decision making. CONCLUSIONS : Therefore, decision making for a more efficient and sophisticated road management than the method assuming future traffic can be expected to be the same as the existing pattern or steady traffic demand. The reflection of a reliable forecasting of the future traffic demand to life cycle cost analysis (LCCA) can be a very vital factor because many studies are generally performed without considering the future traffic demand or with an analysis through setting a scenario upon LCCA within a pavement management system.

This study was conducted by survey and inspection of stair passage leading lights in shopping buildings which are more than 5 stories and have an underground parking lot located at Pyeongtaek-si and Seongnam-si. Number of shopping building for this study is 30 and of stair passage leading light inspected by two lights in each shopping building is 60. The result of this study is that the type of installed leading lights is LED(77%), and 60% of leading lights has problem such as no cleaning, scratch and discoloration, etc. The height of installed leading lights meets the fire law which is less than 1m from the floor. Visible condition of leading lights is good except some leading lights which have a little visible problem due to banner advertisement. 37% of standby power has flickered and went out. 93% of total leading lights meets the fire law which is more than 1lux from 0.5m distance, but cold cathode fluorescent lamps(CCFLs) have the problem which not meets proper brightness level based on fire law. In additional measurement result, zero lux of leading lights is 32%(from 1m distance), 68%(from 1.5m distance) and 98%(from 2m distance). Leading light is very important facility because it is eyes and guide when emergency. Therefore, proper fire facility operating function inspection and total detailed inspection are important to keep the good condition of leading light except simple visual check, and also improvement in law system of type approval, fire construction inspection and illumination level will be needed.

3D-based BIM(Building Information Modeling) technologies can be utilized effectively as a means of systematic management of facility information for safety assurance and effective maintenance of waterworks facilities. In this study, BIM models of water treatment facilities that can be used as basic data for BIM-based maintenance of waterworks facilities were developed. Information exchange and generality of the developed BIM models were evaluated by conducting interoperability analysis of IFC(Industry Foundation Classes) conversion models. In addition, the application of COBie(Construction Operations Building information exchange) was recommended as an effective countermeasure to deal with technical limitation regarding exchange and utilization of facilities-related information through current IFC models. The results of this study can contribute to the development of BIM-based maintenance system for waterworks facilities.