In this study, the structural performance of the specimen fabricated through 3D printing was evaluated through monotonic loading experiments analysis to apply to 3D printed structures. The compression and flexural experiments were carried out, and the experimental results were compared to the finite element model results. The loading directions of specimens were investigated to consider the capacity of specimens with different curing periods, such as 7 and 28 days. As a result, the strength tended to increase slightly depending on the stacking direction. Also, between the 3D-printed panel composite and the non-reinforced panel, the bending performance depended on the presence or absence of composite reinforcement.

One of the most important problems in the cutting process of CFRP is tool wear. During CFRP machining, high temperature caused by friction between the cutting tool and the carbon fiber structure increase tool edge wear. Since CFRP is manufactured in a form in which the fibrous tissue is combined with a bonding resin, delamination caused by the separation of the resin and carbon fiber during process is recognized as a very big problem. This delamination proceeds very rapidly as the wear of the drill edge increases. Therefore, in this experiment, tool wear was measured during drilling using a TiAlN-coating drill with excellent wear resistance. In this study, tool wear is measured to suggest optimized cutting conditions for each material.

본 연구에서는 3D 프린팅 FDM 방식의 적층 방향에 따라 기계적 물성이 달라지는 이방성 특성을 확인하고 이를 이용하여 위상 최 적설계를 수행하였다. 벤치마크 문제인 자동차 현가장치 부품 중 하나인 로어 컨트롤 암에 대하여 밀도법 기반 위상 최적설계를 수행 하였으며, 외부 하중과 이방성 특성에 따라 위상 최적결과가 다르게 나타나는 것을 확인하였다. 이를 이용하여 최적화된 모델에 대하 여 3D 프린터로 적층 방향을 달리하여 2가지 시험품을 제작하였으며 인장시험을 수행하였다. 시험시 3D 비접촉 변형률 측정기를 이 용하여 변형률을 구하였으며 이를 CAE 응답해석으로 얻은 변형률과 비교한 결과가 정량 및 정성적으로 일치하는 것을 확인하였다. 3D 프린팅 적층 방향을 고려한 위상 최적모델의 인장 실험 결과를 통해 해당 최적설계 방법론의 유효성을 검증하였다.

It is very important to assure the seismic performance of equipment as well as building structures in seismic design of nuclear power plant(NPP). Seismically isolated structures may be reviewed mainly on the horizontal seismic responses. Considering the equipment installed in the NPP, the vertical earthquake responses of the structure also should be reviewed. This study has investigated the vertical seismic demand of seismically isolated structure by lead rubber bearings(LRBs). For the numerical evaluation of seismic demand of the base isolated NPP, the Korean standard nuclear power plant (APR1400) is modeled as 4 different models, which are supported by LRBs to have 4 different horizontal target periods. Two real earthquake records and artificially generated input motions have been used as inputs for earthquake analyses. For the study, the vertical floor response spectra(FRS) were generated at the major points of the structure. As a results, the vertical seismic responses of horizontally isolated structure have largely increased due to flexibility of elastomeric isolator. The vertical stiffness of the bearings are more carefully considered in the seismic design of the base-isolated NPPs which have the various equipment inside.

Even though the longitudinally stiffened laminated composite plates with closed section ribs should be an effective system for axially compressed members, the existing researches on the applications of closed-section ribs, especially for the laminated composite plates, are not sufficient. This study is aimed to examine the influence of the sectional stiffness of U-shaped ribs on the buckling modes and strengths of laminated composite plates. Applying the orthotropic plates with eight layers of the layup [(0°)4]s and [(0°/90°)2]s, 3-dimensional finite element models for the U-rib stiffened plates were setup by using ABAQUS and then a series of eigenvalue analyses were conducted. From the parametric studies, the minimum required ply thicknesses as well as the buckling strengths were presented for the analysis models. The buckling strengths were compared with the theoretical critical stress equation for simply supported plates based on the Classical laminated plate theory. This study will contribute to the future study for evaluating the minimum required stiffness and optimum design of U-rib stiffened plates

압축을 받는 복합적층판의 보강을 위해 폐단면리브를 적용하는 것이 효과적이나, 적정 크기나 최적 두께에 대한 충분한 연구자료가 제시되지 못하고 있다. 이에 따라 폐단면리브 단면 제원에 따른 복합적층판의 압축좌굴 거동에 대한 영향이 우선 검토되어야 할 필요성이 있다. 본 논문에서는 직교이방성 [(0°)4]s와 Cross-ply [(0°/90°)2]s 적 층단면을 각각 고려하여 U리브 단면강성에 따른 복합적층 보강판의 탄성좌굴강도 및 좌굴모드의 변화를 수치해석 적으로 검토하였다. 구조부재로써 적용성을 고려하여 U리브 단면 모델을 선정하였고 유한요소해석 프로그램인 ABAQUS를 이용하여 U리브 적층두께에 따른 고유치 해석을 실시하였다. U리브와 같은 폐단면 보강재를 적용한 복 합적층판에서는 단순지지 조건의 판좌굴 강도에 비해 상승효과가 있음이 본 연구의 수치해석 결과로부터 입증되었 으며 본 해석연구 대상 모델에 대해 U리브 최적 적층두께를 분석하였다. 본 논문의 연구 결과는 향후 U리브의 최 적 단면 선정방안을 제시하는데 기여할 수 있을 것으로 기대된다.

판처럼 거동함을 밝히고, 간단한 공식들을 개발하여 발표한 바 있다. 대부분의 교량이나 건물의 상판은 형상비가 큰 경우가 많은데, 이런 구조물의 평형방정식에 대한 종방항 모멘트항(Mx)의 영향은 매우 작아서, 더욱 간단한 해 석이 가능하다. 본 논문에는 이러한 문제들에 대한 연구결과를 제시하였다.