In the recent business environment, risks related to product safety problems are increasing. These are arising from various factors such as increasing product and production complexity, supply chain diversification, enhanced PL (product liability) law and strengthening regulations of the government. Accordingly, ISO (international organization for standardization) published standards of PSMS (product safety management system) for suppliers such as ISO 10377 and ISO 10393. Meanwhile, the ISO 9001 QMS (quality management system) was revised in 2015, and it has established itself as an effective tool that can consistently meet the various requirements of stakeholders and promote customer satisfaction. This study aims to suggest an integration framework of QMS and PSMS based on the recent ISO international standards. To this end, firstly, the relationship between QMS and PSMS is studied based on the quality and product safety definitions, PDCA (plan-do-check-act) cycle and risk-based thinking. Secondly, the requirements of ISO 10377 and ISO 9001 are compared and classified as the common and ISO 10377 specific requirements. Finally, integration steps of two systems are suggested and guidelines that can systemize the integrated requirements are presented in the aspect of processes and documentation. This study is expected to be used as a guideline that helps companies those have already acquired QMS certification to build an international-level product safety management system early.

The ISO 9000 Quality Management System(QMS) standard is an effective tool that can consistently meet the various requirements of stakeholders and promote customer satisfaction management. However, in the recent business environment, not only quality issues but also risks in various other areas are increasing. In particular, risks related to product safety problems which are arised from product convergence, diversification of methods of production and globalization of supply chain pose a great threat to the sustainability of companies. Accordingly, ISO published standards of Product Safety Management System(PSMS) for suppliers such as ISO 10377 and ISO 10393. This study aims to suggest an integration framework of QMS and PSMS based on ISO international standards. To this end, the relationship of QMS and PSMS are analyzed and the requirements of the both systems are integrated based on the Plan-Do-Check-Act(PDCA) cycle and risk-based thinking. In addition, guidelines that can systemize the integrated requirements are presented in the aspect of processes and documentation. This study is expected to be used as a guideline that helps companies that have already acquired QMS certification to build an international level product safety management system early.

This study analyzed that the infant carrier standard affects the satisfaction of certification. Baby Carrier Safety requirements in the Republic of Korea is enforceable by court duty certification. Therefore, a test was conducted to compare with the safety requirements of the United States and Europe and the survey was conducted to know how much manufacturers and importers are satisfied with the certification. According to the test result, there is a difference between domestic and foreign safety requirements about flame retardancy. As a result of the survey, The satisfaction of the certification is proportionate to the one of product standard.

In medium and small firm, the management system which is simple and where there is a practicality is required Ill)re than the management system which is complicated and minute of the centered around large company so that the introduction of the standard costs can be activated and it can be usefully used as a tool of management decisions. A difference between the standard costs introduction plan proposed in this paper and the preexistance study literature are as follows. In this paper, by breaking from the whole cost accounting aiming at all item, that is the traditional introduction method, and presenting the product cost accounting method by group the standards setting object was minimized and simplified. In this way, if the standards setting object is simplified, it is quick at the perimeter environment change as the little man power and flexibly it corresponds to and the cost information calculation which is exact with the setting up and maintenance of the efficient cost standard becomes available. As a result of applying for real through S corp., the usability of the method that the standard costs introduction method proposed in this paper produced the standard costs relatively short within period, it manages was verified. And the standard costs introduction method proposed in this paper went by the various cost information for each products, the management class did the management will decision which was objective and reasonable in the putting first.

The main objective of this study is to analyze characteristics on the somatotype of modern adult women In order to standardize of products. The sample for this work chosen from data which were collected and measured by Size Korea during two years(2003~2004). In order to analyze feature of the somatotype of modern adult women, analysis was peformed in 1,371 subjects(645 twenties women, 725 thirties women) about 21 body parts such as height(4 parts), width(3 parts), thickness(3 parts), circumference(7 parts), length(3 parts) and body weight. According to the result of analysis, it was found that the twenties group was near in slender somatotype, whereas the thirties group was near in fat somatotype compared to standard somatotype.

표시상의 결함은 제조물의 설계 및 생산과정에서 제거할 수 없는 위험성이 존재하는 경우 사용자가 사고를 예방 또는 회피할 수 있도록 사용자에게 정보를 제공하지 않는 경우 발생하는 결함이다. 제품안전표지는 간단한 표지나 라벨, 제품 사용설명서 등으로 제시되며 표시상의 결함이 없도록 제품을 안전하고 효율적으로 취급하게 하고, 제품사용여부에 관계없이 제품에 접근, 접촉하는 사용자나 제3자 등에 대해서 제품에 잠재하는 위험을 회피하기 위해 주는 주의이다. 본 연구의 목적은 국내에서 발생한 안전사고정보를 수집, 분석하여 표준화해야 할 제품안전표지의 종류와 내용을 제시하는데 있다.

The purpose of this study is to analyse injuries of consumer product and to propose an alternative standardization for the product safety based on results of the analysis related with consumer injury. Firstly, We categorized hazard factors according to industrial characteristics referred to current injury information in Korea. And secondly, we decided consumer injury index(CII) according to the results of current consumer injury. The consumer injury index is the concept of risky level, which was decided by probability and severity of injury. Lastly, we developed an alternative standardization for the product safety considering consumer injury index.

The purpose of this study is to carry out comparative analysis of the differences between the trend of biometrics-related product standardization in the world and that of Korea, and to suggest ideal directions and building plans for domestic biometrics industry. Its purpose also includes constructing promptly a standardization of domestic biometrics industry based on the suggested standards.