블로우업이 발생하는 구간에 ASR이 발생하고 있지만, 한국도로공사는 재료팽창인 ASR을 고려하지 않고, 콘크리트 팽창량을 계산하 여 팽창줄눈 설치간격을 제시하고 있다. 또한, 블로우업은 일종의 좌굴현상이므로 슬래브 두께에 따라 팽창줄눈 간격을 제시할 필요가 있다. 따라서 본연구는 재료팽창과 슬래브 두께를 고려하여 팽창줄눈 간격을 제시하고자 한다. 팽창량 계산시, 재료변형률과 지역별 온도와 건조수축을 고려하였으며, 이를 동등한 팽창을 유발하는 온도상승량으로 변환하는 식을 도출하였다. 기준온도를 정하기 위해 실제 현장데이터를 팽창량 식에 대입하여 온도상승량으로 변환하였으며, 이를 블로우업을 모사한 콘크리트 포장 모형의 유한요소해석 결과를 이용하여 결과값을 비교하였다. 안전설계를 위해 더 작은 온도 값인 블로우업 구조해석 결과 값 중 안전온도를 블로우업이 일 나는 기준으로 선정하였으며, 안전 온도를 넘지 않은 지역별 슬래브 두께에 따른 최대 팽창줄눈 간격을 제시했다. 한국도로공사가 제 시하고 있는 기준과 비교한 결과, 일부 지역은 한국도로공사에서 제시하고 있는 기준에 만족하지 않았다. ASR 변형률을 고려하여 슬 래브 두께에 따라 지역별로 팽창줄눈 간격을 제시하는 것이 블로우업 파손을 저감하고, 포장의 안정성을 향상시키는데 도움이 될 것 이라고 판단된다.

PURPOSES : Previously, the expansion state of the concrete pavement in which AAR occurred could not be determined. Because the current situation has not been evaluated, it has been difficult to prepare an appropriate response. In this study, a method for calculating the expansion amount of concrete pavement using the stiffness damage test (SDT) is proposed. METHODS : The SDT method was examined through a literature review. For the laboratory tests, specimens that generated AAR were produced based on the mix design (2018) of the Korea Expressway Corporation. SDT was used to calculate various mechanical properties, and their correlation with the expansion amount was reviewed. RESULTS : Using the SDT, various mechanical properties(elastic modulus, hysteresis area, plastic deformation, plastic deformation index, stiffness damage index, and nonlinear index) were calculated based on the expansion rate of the AAR. The elastic modulus was evaluated as the best predictor of the expansion rate. Thus, if the elastic modulus is calculated using SDT, a prediction equation can be used to calculate the amount of AAR expansion. This equation will need to be supplemented by further research. CONCLUSIONS : SDT was used to confirm that the expansion state due to the AAR of the concrete pavement could be indirectly evaluated. Among the mechanical properties related to SDT, the elastic modulus was found to be the most suitable for predicting the amount of expansion.

PURPOSES : The purpose of this study is to confirm the thermal expansion characteristics of concrete mixed with 1% waste glass fine aggregates, which is the amount stipulated for recycled aggregates in the current quality standard. METHODS : The coefficient of thermal expansion was measured by applying AASHTOT 336-10 using a LVDT. The results measured were used as physical properties in a finite element analysis to confirm the change in tensile stress and the displacement of the right angle section of the upper slab of a concrete pavement due to admixture substitution. RESULTS : The thermal expansion coefficients of concrete based on the replacement rate of the admixture when the waste glass fine aggregates are replaced are within the range of the thermal expansion coefficients of concrete specified in the Federal Highway Administration report. As the replacement rate of the admixture increases, the thermal expansion coefficient of concrete decreases. As the thermal expansion coefficient decreases, the slab pavement curling displacement and the tensile stress of the center of the upper slab of concrete decrease. CONCLUSIONS : In the short term, the presence or absence of waste glass fine aggregates does not significantly affect the thermal expansion coefficient of concrete. However, in the long term, waste glass fine aggregates are reactive aggregates that causes ASR, which creates an expandable gel around the aggregates and results in concrete expansion. Therefore, the relationship between ASR and the thermal expansion coefficient must be analyzed in future studies.

본 연구에서는 콘크리트 이미지에서 균열의 크기와 위치를 검출하는 알고리즘을 개발하였다. 균열은 총 9단계로 자 동 검출되었으며, 기본 기능은 매트랩 프로그램의 기능이었다. 5단계와 8단계에서는 균열 검출 정확도를 높이기 위해 사용자 알고리즘을 추가하였으며, 균열 영상과 비균열 영상을 각각 1,000개씩 사용하였다. 균열 이미지에서는 균열이 100% 검출됐지만 품질 측면에서 나쁘지 않은 결과를 제외하더라도 91.8%의 결과가 매우 양호했다. 또한, 균열되지 않은 이미지의 정확도도 94.7%로 매우 양호했다. 이에 본 연구에서 제시한 균열검출 알고리즘은 콘크리트 우물 균열의 위치와 크기를 검출할 수 있을 것으로 기대된다.

PURPOSES : The purpose of this study is to suggest a thermal expansion coefficient measurement method using an embedded strain transducer (EST) and vibrating wire gauge (VWG), as well as to evaluate the reliability of the proposed methods by comparing them with the AASHTO T 336-10 standard method. METHODS : To apply the AASHTO 336-10 test method, which is the criterion for reliability evaluation, a reference specimen using stainless steel (sus304) is manufactured, and a thermal expansion coefficient of 17.308με/°C is obtained based on ISO regulations. Using the reference specimen, the correction factor of the thermal expansion coefficient measurement equipment is measured to be 2.93με/°C, and using this value, the thermal expansion coefficient of the mortar specimen containing the embedded gauges is measured accurately. The reliability of the proposed experimental method is evaluated by measuring the thermal expansion coefficient of the embedded gauge with temperature compensation and then comparing it with that of the reference specimen. RESULTS : The coefficient of thermal expansion of the mortar specimen is measured to be 12.423με/°C based on AASHTO 336-10, 11.963με/°C using the EST method, and 12.522με/°C using the VWG method. Based on the results obtained using the AASHTO method, the embedded gauges show a difference of 1%~3% in terms of the average results, as well as a difference in the standard deviation of 0.059~0.186. Therefore, our level of confidence in the thermal expansion coefficient experiment using the embedded gauges is high. CONCLUSIONS : When using the AASHTO 336-10 test method, the thermal expansion coefficient should be obtained by measuring the length change of the specimen; however, some engineering judgment of the experimenter is required when the measurement values fluctuate during the temperature stabilization period. In the thermal expansion coefficient test using embedded gauges (EST and VWG), temperature compensation must be performed. Furthermore, it is assumed that the temperature difference between the water tank and test specimen does not significantly affect the thermal expansion coefficient measurement because the important point is not the actual temperature value but the temperature gradient. For reliability evaluation, a statistical significance review of the strain distribution by measurement method is performed via a T-test comparing with the AASHTO test result (12.423με/°C) and the reliability level for each measurement method remains confidential.

PURPOSES : Pavement growth (PG) is a phenomenon whereby the overall length of a concrete pavement increases. The increase in length induces an axial compressive force in the concrete pavement slab, resulting in blow-up and damage of adjacent structures, such as a bridge. PG is influenced by several interacting factors, including climatic conditions, pavement materials, joint systems, incompressible particles (IP) infiltrating the joints or cracks in the slab, and an expansion caused by reactive aggregates in the concrete. However, it is difficult to predict PG and blow-up due to various complicated factors. Therefore, in this study, the pavement growth and blow-up analysis (PGBA) package program was developed to predict the PG and blow-up potential. The PGBA can consider the pavement configuration, expansion joint (EJ) configuration, climatic conditions, and design reliability. To evaluate the effects of influencing factors — such as climatic data, EJ configuration, pavement structures and materials, and design reliability — on PG and occurrence time of blow-up, a numerical example was demonstrated and a sensitivity analysis was performed. METHODS : To predict the PG, the concrete temperature was calculated using an appropriate analytical model. The trigger temperature for pavement growth(TTPG) was predicted using a statistical equation that considers pavement age, joint spacing, and precipitation. An analytical solution for estimating the concrete slab movement was performed. Through the calculated TTPG and the amount of PG, the service life of the EJ (width of EJ) can be predicted compared to the allowable width. In addition, by using analytical and finite elements, the safe temperature(Tsafe) for preventing blow-up occurrence was calculated. The blow-up occurrence was assumed to occur when the variation between the concrete temperature and TTPG was larger than Tsafe. RESULTS :As a result of the sensitivity analysis of maximum temperature and precipitation, the temperature and precipitation increase and the EJ service life and possibility of blow-up decrease. Sensitivity analysis was performed on the thermal expansion coefficient, pavement thickness, base layer type, concrete elastic modulus, and joint rotational stiffness in the concrete pavement structure and properties. In the PGBA program, the coefficient of thermal expansion and the type of base layer significantly affect the EJ life, as do the possibility of blowup and the elastic modulus. The joint rotational stiffness and pavement thickness had little effect on the EJ life but were found to affect the possible timing of blow-up. As a result of the PGBA sensitivity analysis of the width and spacing, which are the specifications of the EJ, the life of the EJ and the possibility of blow-up increased as the joint width increased; however, the EJ life and blow-up increased as the EJ interval reached a certain value. It was found that the possibility of a blow-up occurrence decreased. The results for the PGBA program in extreme weather conditions, the life span of EJs, and the possibility of blow-up in normal climates were reduced by over 50 %. CONCLUSIONS : As a result of PGBA sensitivity analysis, it was found that the substrate type, thermal expansion coefficient, precipitation, and alkali-silica reaction had the greatest influence on pavement expansion and blow-up.

PURPOSES : Pavement growth (PG) of concrete pavement has been recognized as a major concern to highway and airport engineers as well as to road users for many years. PG is caused by the pressure generation in the concrete pavement as a result of a rise of the concrete temperature and moisture. PG could result in concrete pavement blowup and damage the adjacent or the nearby structures such as bridge structures. The amount of the PG is affected by the complicated interactions of numerous factors such as climatic condition, amounts of incompressible particles (IP) infiltration into the joints, pavement structure, and materials. Trigger temperature for pavement growth (TTPG) is defined as the concrete temperature when all transverse cracks or joints within the expansion joints completely close and generating a pressure in the pavement section. It is one of the most critical parameters to evaluate the potential of PG occurring in the pavement. Unfortunately, there are no available methods or guidelines for estimating TTPG. Therefore, this study aims to provide a methodology to predict TTPG of a concrete pavement section. METHODS : In this study, a method to evaluate the TTPG and its influencing factors using the field measured data of concrete pavement expansions is proposed. The data of the concrete pavement expansions obtained from the long-term monitoring of three concrete pavement sections, which are I-70, I-70N, and Md.458, in Maryland of United Stated, were used. The AASHTO equation to estimate the joint movement in concrete pavement was used and modified for the back-calculation of the TTPG value. A series of the analytical and numerical solutions presented in the literatures were utilized to predict the friction coefficient between the concrete slab-base and to estimate the maximum concrete temperature of these three pavement sections. RESULTS : The estimated maximum concrete temperature of these three pavement sections yearly exhibited relatively constant values, which range from 40 to 45 °C. The results of the back-calculation revealed that the TTPG of the I-70 and Md.58 sections decreased with time. However, the TTPG of the I-70N section tended to be relatively constant from the first year of the pavement age. CONCLUSIONS : The estimation of the TTPG for the three concrete pavement sections showed that the values of the TTPG gradually decreased although the yearly maximum concrete pavement temperature did not change significantly.

도심지나 문화재가 인접한 지역 등의 소음, 진동 등 기존 발파해체 공법이 제한적인 조건에서 사용할 수 있는 구조물 해체 공법으로 무소음화학팽창제(soundless chemical demolition agent, SCDA)를 이용한 공법이 있다. 그러나 SCDA의 사용에 대한 기준이나 가이드라인에 참고될 만한 연구는 미미한 실정이다. 이 연구에서는 실내실험을 수행하여 강관의 길이, 외부수분차단, 수화열 발산 등의 다양한 조건에 따른 SCDA의 팽창압 발현 특성을 확인하였다. 또한 SCDA의 최소요구팽창압 예측을 위한 해석모델(자유단 1면, 고정단 3면의 직사각형 모델)을 개발하고 주요변수해석(홀 간 거리, 콘크리트 압축강도)을 수행하였다. 이 연구의 해석결과를 활용하여 자유단으로부터 콘크리트 구조물의 박락을 효과적으로 유도할 수 있을 것으로 판단된다.