본 연구는 뷰티 숏폼 콘텐츠의 특성이 소비자의 행동에 미치는 영향에 대해 조사하였으며, 뷰티 숏폼 콘텐츠와 관련한 통계학적 연구를 통해 뷰티, 마케팅 분야에 학술적 기초자료를 제공함으로써 학문적 인 기여를 하고, 양질의 콘텐츠를 제작하고 효과적인 마케팅에 도움이 되게 하는데 연구의 목적이 있다. 미 용 소비자를 대상으로 한 온라인 설문조사로 회수된 총 405부의 유효 설문을 통계분석에 최종 사용하였다. 분석 결과 뷰티 숏폼 콘텐츠 특성이 높을수록 구매의도, 추천의도, 고객만족이 모두 높아지는 것으로 볼 수 있다. 따라서 뷰티 숏폼 콘텐츠 제작 시 소비자의 호감을 살만한 신뢰를 얻을 수 있는 내용으로 구성되며, 소비자와 소통이 원활하고, 사실적인 내용이 담긴 재미있는 영상을 제작하면 짧은 시간에 확산이 용이할 수 있으며, 소비자의 긍정적인 소비행동을 이끌어내어 매출 증진에 기여될 것으로 사료된다.

Vulnerable populations in healthcare facilities are more sensitive to exposure to indoor air pollutants, and therefore are more affected by such pollutants than the general population. This was the underlying reason why studies of indoor air pollutant concentration distribution and health risk assessment have been conducted targeting facilities, such as daycare centers, medical facilities, elderly care facilities, and postnatal care centers. However, previous studies have mainly focused on daycare and medical facilities for their research, and relatively speaking, studies conducted on the other venues are lacking. Therefore, this study aims to present the current status of indoor air quality and perform a health risk assessment in regard to Formaldehyde exposure at postnatal care centers and elderly care facilities. Here, the study focused on facilities that had undergone pollution level inspections from January 2017 to December 2021. A total of 81 postnatal care centers and 48 elderly care facilities were selected as the subject of the study. Then, the study utilized concentrations of five elements (CO2, HCHO, PM10, PM2.5, TBC) to determine the status of indoor air quality of both postnatal care centers and elderly care facilities. For health risk assessment, HCHO concentration was used. The investigation demonstrated that the yearly average concentration of the five elements stood within the indoor air quality maintenance standards, and the ratio of PM2.5 to PM10 in the two types of facilities was distributed as high as about 70%. In addition, the study showed that HCHO and TBC demonstrated a positive correlation when the relationship between indoor temperature and humidity with the five elements was examined. The health risk assessment showed that the cancer risk level of postnatal care center users stood below 10-6, below the level that is perceived as an acceptable risk. The cancer risk of workers from both postnatal care centers and elderly care facilities and elderly care facility users exceeded the acceptable risk level of 10-6, but was shown to be below 10-4, the maximum acceptable risk.

저층 침적 위험·유해물질(Hazardous and Noxious Substances)은 해저에 침적되는 위험·유해물질로 직접 및 광학 탐지 기법의 적용 이 어렵기 때문에 수중에서 효과적인 음향 탐지 기법 적용이 요구된다. 본 연구에서는 저층 침적 위험·유해물질인 클로로폼(Chloroform)을 이용한 후방산란신호 측정 실험을 통해 저층 침적 위험·유해물질 음향 탐지 가능성을 확인하였다. 제작된 아크릴 수조 내에 지점토를 이 용하여 웅덩이를 만든 후 Pan&Tilt를 이용하여 수평입사각을 90°에서 50°까지 0.5° 간격으로 변화시켜가며 클로로폼 유무에 따른 후방산란 신호 측정이 수행되었다. 송수신기를 단상태로 주파수 200 kHz, 신호길이 25 인 정현파 신호를 이용하여 송수신하였으며, 클로로폼 유 무에 따른 후방산란신호를 측정하였다. 클로로폼이 침적된 경우 수평입사각 약 80°이하에서 물과 클로로폼 경계면에서의 후방산란신호 수신준위가 작아지는 것이 확인되었다. 물과 클로로폼 경계면에서의 후방산란신호 측정된 결과를 통해 저층 침적 위험·유해물질 음향 탐 지 가능성을 확인하였다.

The recycling of solid waste materials to fabricate carbon-based electrode materials is of great interest for low-cost green supercapacitors. In this study, porous carbon foam (PCF) was prepared from waste floral foam (WFF) as an electrode material for supercapacitors. WFF was directly carbonized at various temperatures of 600, 800, and 1,000 oC under an inert atmosphere. The WFF-derived PCF (C-WFF) was found to have a specific surface area of 458.99 m2/g with multi-modal pore structures. The supercapacitive behavior of the prepared C-WFF was evaluated using a three-electrode system in a 6 M KOH aqueous electrolyte. As a result, the prepared C-WFF as an active material showed a high specific capacitance of 206 F/g at 1 A/g, a rate capability of 36.4 % at 20 A/g, a specific power density of 2,500 W/kg at an energy density of 2.68 Wh/kg, and a cycle stability of 99.96 % at 20 A/g after 10,000 cycles. These results indicate that the C-WFF prepared from WFF could be a promising candidate as an electrode material for high-performance green supercapacitors.

본 논문에서는 OTT 플랫폼에서의 킬러콘텐츠 분석틀을 제시하고, 킬러콘텐츠로 주목받아 온 K-드라마 4편의 사례를 분석하였다. 사례는 킹덤(시즌 1, 시즌 2, 아신전), 오징어게임, 지옥 그리고 애플티비플러 스가 출시한 파친코(시즌 1)이다. 분석을 위해, 본 논문에서는 킬러콘텐 츠 분석도구를 활용하였다. 킬러콘텐츠 분석도구는 문화콘텐츠 창출-소 통-향유의 체계 및 내적 구조로 구성된다. 분석 결과, 4편은 공통적으 로 내적구조 ① 스토리텔링, ② 이미지투르기에서 강점을 나타내었다. 킹덤의 경우 이외에도 ③ 캐릭터빌딩 구조가 탄탄했으며, 오징어게임의 경우 ㉡ 시대상황 및 ③ 캐릭터 빌딩에서 강점을 나타내었다. 지옥은 ③ 캐릭터 빌딩에서 압도적 강점을 나타내었고, 파친코는 (a) 문화원형 과 ㉢ 마케팅 부문에서 강점이 있다.

Recently, there has been growing interest in harmful substances released from household items such as volatile organic compounds (VOCs) and this has increased people’s environmental awareness. In this study, adhesives and manicures were used as samples of indoor household goods and formaldehyde emission and tested over time under temperature conditions of 15oC, 25oC, 35oC, and 45oC. The small chamber method as the indoor air quality process test method was employed and used to evaluate the concentration of formaldehyde emissions. As a result, formaldehyde emissions gradually decreased over time in both tests using adhesives and manicures. The cumulative emission showed a logarithmic function over time, and the formaldehyde can be released for longer periods of time at lower temperature conditions. The logarithmic value and response time showed linear relationships, and it can be inferred that the formaldehyde was released from the sample through the first order reaction. Furthermore, the relationship between temperature and velocity constants which was determined using the Arenius linear equation showed that the reaction rate of formaldehyde can be estimated by a temperature change.

프랑스의 비평가 니콜라 부리오(Nicolas Bourriaud)는 최근 저작 『엑스폼 The Exform』 (2016)에서 자본주의적인 배제와 추방의 메커니즘이 작동하는 엑스폼의 영역에 주목하고, 이 영역을 활동의 장으로 삼는 동시대 미술에 대한 비평적 분석과 역사적 조망을 제시하고 있다. 본 연구는 엑스폼의 작동에 제동을 거는 동시대 미술의 ‘리얼리스트 프로젝트’에 대해 부리오가 논의하는 사상적 토대와 실천의 전략을 면밀하게 검토한다. 특히 본고는 부리오가 다루는 루이 알튀 세의 광기 어린 사유와 우발성의 유물론, 그리고 발터 벤야민의 유물론적 역사학을 집중적으로 분석함으로써 부리오의 비평적 실천이 지니는 의의를 고찰한다.

The conversion of all carbon preforms to dense SiC by liquid infiltration can become a low-cost and reliable method to form SiC-Si composites of complex shape and high density. Reactive sintered silicon carbide (RBSC) is prepared by covering Si powder on top of 0.5-5.0 wt% Y2O3-added carbon preforms at 1,450 and 1,500°C for 2 hours; samples are analyzed to determine densification. Reactive sintering from the Y2O3-free carbon preform causes Si to be pushed to one side and cracking defects occur. However, when prepared from the Y2O3-added carbon preform, an SiC-Si composite in which Si is homogeneously distributed in the SiC matrix without cracking can be produced. Using the Si + C = SiC reaction, 3C and 6H of SiC, crystalline Si, and Y2O3 phases are detected by XRD analysis without the appearance of graphite. As the content of Y2O3 in the carbon preform increases, the prepared RBSC accelerates the SiC conversion reaction, increasing the density and decreasing the pores, resulting in densification. The dense RBSC obtained by reaction sintering at 1,500 oC for 2 hours from a carbon preform with 2.0 wt% Y2O3 added has 0.20% apparent porosity and 96.9% relative density.

Porous carbons have been widely used as electrode material for supercapacitors. However, commercial porous carbons, such as activated carbons, have low electrochemical performance. Nitrogen-doping is one of the most promising strategies to improve electrochemical performance of porous carbons. In this study, nitrogen self-doped porous carbon (NPC) is prepared from melamine foam by carbonization to improve the supercapacitive performance. The prepared NPC is characterized in terms of the chemical structures and elements, morphology, pore structures, and electrochemical performance. The results of the N2 physisorption measurement, X-ray diffraction, and Raman analyses reveal that the prepared NPC has bimodal pore structures and pseudo-graphite structures with nitrogen functionality. The NPC-based electrode exhibits a gravimetric capacitance of 153 F g−1 at 1 A g−1, a rate capability of 73.2 % at 10 A g−1, and an outstanding cycling ability of 97.85% after 10,000 cycles at 10 A g−1. Thus, the NPC prepared in this study can be applied as electrode material for high-performance supercapacitors.

The conversion of carbon preforms to dense SiC by liquid infiltration is a prospectively low-cost and reliable method of forming SiC-Si composites with complex shapes and high densities. Si powder was coated on top of a 2.0wt .% Y2O3-added carbon preform, and reaction bonded silicon carbide (RBSC) was prepared by infiltrating molten Si at 1,450oC for 1-8 h. Reactive sintering of the Y2O3-free carbon preform caused Si to be pushed to one side, thereby forming cracking defects. However, when prepared from the Y2O3-added carbon preform, a SiC-Si composite in which Si is homogeneously distributed in the SiC matrix without cracking can be produced. Using the Si + C → SiC reaction at 1,450oC, 3C and 6H SiC phases, crystalline Si, and Y2O3 were generated based on XRD analysis, without the appearance of graphite. The RBSC prepared from the Y2O3-added carbon preform was densified by increasing the density and decreasing the porosity as the holding time increased at 1,450oC. Dense RBSC, which was reaction sintered at 1,450oC for 4 h from the 2.0wt.% Y2O3-added carbon preform, had an apparent porosity of 0.11% and a relative density of 96.8%.

Macro-porous carbon foams are fabricated using cured spherical phenolic resin particles as a matrix and furfuryl alcohol as a binder through a simple casting molding. Different sizes of the phenolic resin particles from 100– 450 μm are used to control the pore size and structure. Ethylene glycol is additionally added as a pore-forming agent and oxalic acid is used as an initiator for polymerization of furfuryl alcohol. The polymerization is performed in two steps; at 80oC and 200oC in an ambient atmosphere. The carbonization of the cured body is performed under Nitrogen gas flow (0.8 L/min) at 800oC for 1 h. Shrinkage rate and residual carbon content are measured by size and weight change after carbonization. The pore structures are observed by both electron and optical microscope and compared with the porosity results achieved by the Archimedes method. The porosity is similar regardless of the size of the phenolic resin particles. On the other hand, the pore size increases in proportion to the phenol resin size, which indicates that the pore structure can be controlled by changing the raw material particle size.

In order to develop a process for manufacturing a composite structure of an intermetallic compound foam and a hollow material, the firing and pore form of the Al-Ni precursor in a steel pipe are investigated. When the Al-Ni precursor is foamed in a hollow pipe, if the temperature distribution inside the precursor is uneven, the pore shape distribution becomes uneven. In free foaming, no anisotropy is observed in the foaming direction and the pore shape is isotropic. However, in the hollow pipe, the pipe expands in the pipe axis direction and fills the pipe. The interfacial adhesion between Al3Ni foam and steel pipe is excellent, and interfacial pore and reaction layer are not observed by SEM. In free foaming, the porosity is 90 %, but it decreases to about 80 % in the foam in the pipe. In the pipe foaming, most of the pore shape appears elongated in the pipe direction in the vicinity of the pipe, and this tendency is more remarkable when the inside pipe diameter is small. It can be seen that the pore size of the foam sample in the pipe is larger than that of free foam, because coarse pores remain after solidification of the foam because the shape of the foam is supported by the pipe. The vertical/horizontal length ratio expands along the pipe axis direction by foaming in the pipe, and therefore circularity is reduced.

Nb-doped TiO2(NTO) coated NiCrAl alloy foam for hydrogen production is prepared using ultrasonic spray pyrolysis deposition(USPD) method. To optimize the size and distribution of NTO particles based on good physical and chemical stability, we synthesize particles by adjusting the weight ratio of the Nb precursor solution(5 wt%, 10 wt% and 15 wt%). The morphological, chemical bonding, and structural properties of the NTO coated NiCrAl alloy foam are investigated by X-ray diffraction(XRD), X-ray photo-electron spectroscopy(XPS), and Field-Emission Scanning Electron Microscopy(FESEM). As a result, the samples of controlled Nb weight ratio exhibit a common diffraction pattern at ~25.3o , corresponding to the(101) plane, and have chemical bonding(O-Nb=O) at 534 eV. The NTO particles with the optimum weight ratio of N (10 wt%) show a uniform distribution with a size of ~18.2-21.0 nm. In addition, they exhibit the highest corrosion resistance even in the electrochemical stability estimation. As a result, the introduction of NTO coated NiCrAl alloy foam by USPD improves the chemical stability of the NiCrAl alloy foam by protecting the direct electrochemical reaction between the foam and the electrolyte. Thus, the optimized NTO coating can be proposed for excellent protection of NiCrAl alloy foam for hydrocarbon-based steam methane reforming(SMR).

본 연구는 필라테스 동작 시 폼롤러의 적용과 움직임에 따른 몸통과 하지의 근활성도 차이를 알아보는 것이 목적이다. 피험자로 남자 8명을 선정하여 필라테스 네발자세, 교각자세, 코어컨트롤 동작을 매트위에서 정적동작, 폼롤러 위에서 정적동작, 폼롤러 위에서 동적동작으로 무선배정하여 1주 간격으로 수행하였다. 각 동작의 수행 시 척추세움근, 배곧은근, 배바깥빗근, 중간볼기근, 넙다리두갈래근과 넙다리곧은근의 근활성도를 측정하여 일원분산분석으로 분석하였다. 유의수준은 α=.05로 설정하였다. 첫째, 네발기기 동작에서 폼롤러 동적동작에서는 배곧은근, 배바깥빗근, 중간볼기근, 넙다리두갈래근의 근활성도가 높게 나타났으며(p<.001)(p<.05), 폼롤러 정적동작에서는 넙다리곧은근의 근활성도가 높게 나타났다(p<.001). 둘째, 교각자세 동작에서 폼롤러 동적동작에서는 넙다리두갈래근의 근활성도가 높 나타났다(p<.001). 셋째, 코어컨트롤 동작에서 폼롤러 동적 동작에서는 배곧은근, 척추세움근, 중간볼기근의 근활성도가 높게 나타났으며(p<.001)(p<.01), 정적 동작에서는 배바깥빗근의 근활성도가 높게 나타났다(p<.05). 필라테스 운동시 근활성도를 고려하여 방법과 난이도를 적용하면 더욱더 효과적일 것이라 사료된다.

우리나라에서는 콘크리트 구조물의 미적외관에 대한 관심이 미비했으나, 2013년에 경관법이 개정되면서 콘크리트 구조물의 미적외관을 개선하는 노력이 의무화되었다. 이전 연구에서 콘크리트 폼라이너를 제작하기 위해서 대형 3D프린터를 개발하였다. 대형3D프린터로 제작한 폼라이너를 통해서 콘크리트 구조물 측면에 미적 패턴 또는 그림을 효과적으로 만들 수 있다. 본 논문에서는 1)적층출력방식(FDM)으로 3D프린팅된 시편의 비등방성을 고려하기 위한 시편실험를 수행하고, 2)유한요소해석 통해서 3)제작한 폼라이너의 안전성과 사용성을 검토하고 4)제작된 폼라이너에 제작 시 필요한 권장사항을 제시한다.

폴리머 폼은 다공성을 가장 큰 특징으로 하는 재료이기 때문에, 본 연구에서 비가역 열역학 관점을 기반으로 폴리머 폼의 기공 성장 및 합체를 고려한 손상 탄성 구성방정식을 개발하였으며, 개발된 구성방정식은 unilateral 손상의 효과를 고려하였다. 유한요소해석의 적용을 위해 상용 유한요소해석 프로그램인 ABAQUS의 사용자 서브루틴 UMAT을 이용하여 제안된 구성방정식을 수치적으로 구현하였다. 비선형 유한요소해석 결과와 폴리머 폼의 인장 시험 결과와 비교를 통해 제안된 손상 모델의 유효성을 검증하였으며, 제안된 구성방정식의 재료모델상수가 손상에 미치는 영향에 대해 분석하였다.