등검은말벌은 우리나라 뿐 아니라 유럽지역에 침입한 꿀벌의 중요한 포식해충이다. 양봉가들이 살충제를 활용하여 밀도 억제를 시도하고 있으나 아직까지 실현가능하고 과학적 방법과 적용 가능성이 정형화되지 않았다. 본 연구는 양봉가들이 주로 사용하는 살충제를 가지고, 등검은 말벌의 유충과 성충의 살충율과 반응 패턴을 조사하였다. Clothianidin, Dinotefuran, Carbosulfan은 처리 후 30분 내 70% 이상의 살충률을 보 였으며, Bifenthrin, Cartap hydrochloride의 상대적으로 살충률이 낮았다. Clothianidin, Dinotefuran, Carbosulfan의 반수치사약량(LD50)은 각 0.29, 0.65, 2.21 μg/bee이었다. 5령 유충에 대한 24시간 간격으로 3회 연속 섭식 처리를 했을 때, 2일이후에 약효가 나타났고 72시간 후에는 모두 70% 이상 살충률을 보였다. 등검은말벌의 반수치사약량은 양봉꿀벌의 것보다 10-100배 더 높았다. 향후 이 살충제를 말벌 방제에 이용할 수 있을지 추가적 검토가 필요하다.

This study investigated the physicochemical properties of protein-fortified rice flour by mixing rice flour (RF) with untreated and fermented plant proteins. Fermented faba bean protein concentrate (FMFP) and chickpea flour (FMCF) were prepared by solid-state fermentation of faba bean protein concentrate (UTFP) and chickpea flour (UTCF) using Bacillus subtilis. FMFP and FMCF exhibited higher crude protein, reducing sugar and starch contents more than their counterparts. The increased rate of essential and branched-chain amino acids in FMFP and FMCF exceeded that of crude protein. Adding plant proteins to RF decreased swelling power (SP) and increased solubility in RF-UTFP and RF-FMFP mixtures, while SP and solubility increased in RF-UTCF and RF-FMCF mixtures. All RF-plant protein mixtures showed higher gelatinization temperature and lower gelatinization enthalpy than RF. Thermal gelation was found in all RF-plant protein mixtures, but the RF-FMCF mixture may form weak and unstable gel structures. The increase in pasting viscosity was minimal for the RF-UTFP and RF-FMFP mixtures but more pronounced for the RF-UTCF and RF-FMCF mixtures. Overall, FMFP may be a potential protein source to supplement the protein deficiency in RF with minimal changes in RF-based foods’ rheological and textural properties.

토석 채취 후 식생복구지의 토양 특성은 복구 식생의 생육에 중요하다. 본 연구는 토석 채취 후 식생복구지와 인접 소나무 및 굴참나무 임분을 대상으로 0∼10cm, 10∼20cm, 20∼30cm 깊이에 토양의 물리·화학적 특성을 조사하였다. 토양용적밀도와 토양 pH는 식생복구지가 소나무나 굴참나무 임분에 비해 유의적으로 높았으나(P<0.05), 유기탄소와 전질소농도는 인접 산림지에 비해 낮았다. 유효 인은 0~10cm 깊이에서 식생복구지 와 산림지 간 유의적인 차이가 없었으나, 교환성 칼슘은 식생복구지가 인접 산림지에 비해 유의적으로 높게 나타났다. 토양 유기 탄소저장량은 식생복구지가 9,896 kg C ha-1로 소나무 임분 131,368 kg C ha-1나 굴참나무 임분 154,381 kg C ha-1에 비해 유의적으로 낮았으며 질소저장량도(식 생복구지: 2,406 kg N ha-1; 소나무: 10,496 kg N ha-1; 굴참나무: 8,081 kg N ha-1) 유사한 경향을 보였다. 그러나 인, 포타슘, 마그네슘 저장량은 식생복구지와 인접 산림 간 유의적인 차이는 없었다. 한편, 칼슘저장량은 식생복구지가 8,998 kg Ca ha-1로 소나무 임분 697 kg Ca ha-1나 굴참나무 임분 660 kg Ca ha-1에 비해 유의적으로 크게 나타났다. 본 연구 결과에 따르면 토석 채취 후 식생복구지는 토양용적밀도와 토양 pH를 낮추고 유기물의 증가와 질소 시비 같은 양분관리가 필요한 것으로 나타났다.

1개월과 3개월 장기 예보를 지원하기 위해 기상청에서 현업운용 중인 GloSea6 기후예측시스템에는 대기 중 대 기화학-에어로졸 물리과정(UKCA)이 연동되어 있지 않다. 본 연구에서는 저해상도의 GloSea6와 여기에 대기화학-에어로 졸 과정을 연동시킨 GloSea6-UKCA를 CentOS 기반 리눅스 클러스터에 설치하여 2000년 봄철에 대한 예비적인 예측 결과를 살펴보았다. 현업 고해상도 GloSea6 모델이 방대한 전산자원을 필요로 한다는 점을 고려할 때, 저해상도 GloSea6와 GloSea6-UKCA 모델은 대기화학-에어로졸 과정의 연동에 따른 효과를 살펴보기에 적합하다. 저해상도 GloSea6와 GloSea6-UKCA는 2000년 3월 1일 00Z부터 75일 간 구동되었으며, 두 모델이 예측한 2000년 4월 지상 기온과 일평균 강수량의 공간 분포를 ERA5 재분석자료와 비교하였다. GloSea6-UKCA가 예측한 기온과 강수 분포는 기존 GloSea6에 비해 ERA5 재분석자료에 보다 더 유사해졌다. 특히 우리나라를 포함한 동아시아 지역에 대해 과대 모의 경 향이 있던 봄철 지상 기온과 일평균 강수량의 예측 결과의 개선이 주목할 만하다. 또한 적분 시간에 따른 예측된 기온 과 강수량의 시계열에서도 GloSea6-UKCA가 GloSea6보다 재분석자료에 더 가까워진 시간 변화 경향을 살펴볼 수 있었 다. 이는 대기화학-에어로졸 과정이 GloSea6에 연동되었을 때 동아시아지역 봄철 예측 성능이 개선될 수 있음을 보여준다.

In this study, we designed and manufactured a large angular contact ball bearing (LACBB) with low deformation using JIS-SUJ2 steel and analyzed changes in its structural characteristics and chemical composition upon heat treatment. The bearing was produced by hot forging and heat treatment including a quenching and tempering (Q/T) process, and its properties were analyzed using 4 mm thick specimens. A difference in the size distribution of the carbide in the outer and inner parts of the bearing was observed and it was confirmed that large and non-uniform carbide was distributed in the inner part of the bearing. After heat treatment, the hardness value of the outer part increased from 13.4 HRC to 61 HRC and the inner part increased from 8.0 HRC to 59.7 HRC. As a result of X-ray diffraction (XRD) measurements, the volume fraction of the retained austenite contained in the outer part was calculated to be 3.5~4.8 % and the inner part was calculated to be 3.6~5.0 %. The surface chemical composition and the content of chemical bonds were quantified through X-ray photoelectron spectroscopy (XPS), and a decrease in C=C bonds and an increase in Fe-C bonds were confirmed.

In zinc-air batteries, the gel polymer electrolyte (GPE) is an important factor for improving performance. The rigid physical properties of polyvinyl alcohol reduce ionic conductivity, which degrades the performance of the batteries. Zinc acetate is an effective additive that can increase ionic conductivity by weakening the bonding structure of polyvinyl alcohol. In this study, polymer electrolytes were prepared by mixing polyvinyl alcohol and zinc acetate dihydride. The material properties of the prepared polymer electrolytes were analyzed by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Also, Electrochemical impedance spectroscopy was used to calculate ionic conductivity. The electrolyte resistances of GPE, 0.2 GPE, 0.4 GPE, and 0.6 GPE were 0.394, 0.338, 0.290, and 0.213 Ω, respectively. In addition, 0.6 GPE delivered 0.023 S/cm high ionic conductivity. Among all of the polymer electrolytes tested, 0.6 GPE showed enhanced cycle life performance and the highest specific discharge capacity of 11.73 mAh/cm2 at 10 mA. These results verified that 0.6 GPE improves the performance of zinc-air batteries.

β-Ga2O3 has become the focus of considerable attention as an ultra-wide bandgap semiconductor following the successful development of bulk single crystals using the melt growth method. Accordingly, homoepitaxy studies, where the interface between the substrate and the epilayer is not problematic, have become mainstream and many results have been published. However, because the cost of homo-substrates is high, research is still mainly at the laboratory level and has not yet been scaled up to commercialization. To overcome this problem, many researchers are trying to grow high quality Ga2O3 epilayers on hetero-substrates. We used diluted SiH4 gas to control the doping concentration during the heteroepitaxial growth of β-Ga2O3 on c-plane sapphire using metal organic chemical vapor deposition (MOCVD). Despite the high level of defect density inside the grown β-Ga2O3 epilayer due to the aggregation of random rotated domains, the carrier concentration could be controlled from 1 × 1019 to 1 × 1016 cm-3 by diluting the SiH4 gas concentration. This study indicates that β-Ga2O3 hetero-epitaxy has similar potential to homo-epitaxy and is expected to accelerate the commercialization of β-Ga2O3 applications with the advantage of low substrate cost.

Highly safe lithium-ion batteries (LIBs) are required for large-scale applications such as electrical vehicles and energy storage systems. A highly stable cathode is essential for the development of safe LIBs. LiFePO4 is one of the most stable cathodes because of its stable structure and strong bonding between P and O. However, it has a lower energy density than lithium transition metal oxides. To investigate the high energy density of phosphate materials, vanadium phosphates were investigated. Vanadium enables multiple redox reactions as well as high redox potentials. LiVPO4O has two redox reactions (V5+/V4+/V3+) but low electrochemical activity. In this study, LiVPO4O is doped with fluorine to improve its electrochemical activity and increase its operational redox potential. With increasing fluorine content in LiVPO4O1-xFx, the local vanadium structure changed as the vanadium oxidation state changed. In addition, the operating potential increased with increasing fluorine content. Thus, it was confirmed that fluorine doping leads to a strong inductive effect and high operating voltage, which helps improve the energy density of the cathode materials.

In this study, the performances of H2S, NH3, and HCl sensors for real-time monitoring in small emission facilities (4, 5 grades in Korea) were evaluated at high concentration conditions of those gases. And the proper approach for the collection of reliable measurement data by sensors was suggested through finding out the effect on sensor performances according to changes in temperature and humidity (relative humidity, RH) settings. In addition, an assessment on sensor data correction considering the effects produced by environmental settings was conducted. The effects were tested in four different conditions of temperature and humidity. The sensor performances (reproducibility, precision, lower detection limit (LDL), and linearity) were good for all three sensors. The intercept (ADC0) values for all three sensors were good for the changes of temperature and humidity conditions. The variation in the slope value of the NH3 sensor showed the highest value, and this was followed by the HCl, H2S sensors. The results of this study can be helpful for data collection by enabling the more reliable and precise measurements of concentrations measured by sensors.

In this study, the hydrogen sulfide removal performance of materials that can be used instead of NaOH was evaluated to reduce the amount of NaOH, a harmful substance used in chemical cleaning methods. Three alternative chemical agents were evaluated: commercially available chemical-based CB, enzyme-based EB, and natural substance-based NB. The hydrogen sulfide removal performance evaluation consisted of three lab tests: the EL608 method, a method using a bag, a method using a sensor and a chamber, and a field test conducted on a scrubber in operation in the actual field. As a result of evaluation by the EL608 Method, CB was 92.3% (±2.9%), EB 60.5% (±5.8%), and NB 88.3% (±3.6%), similar or somewhat similar to NaOH (5%) 99.8% (0.1%). In the evaluation of the hydrogen sulfide removal performance using Bag, the Michaelis-Menten coefficient was CB 4.30 and EB 5.30, lower than NaOH 6.60, and the affinity for hydrogen sulfide was evaluated to be stronger. Even in the method using the sensor and chamber, CB and EB showed similar hydrogen sulfide removal performance of NaOH, but NB showed low treatment performance. In the evaluation using the scrubber in the actual field, the treatment efficiency of CB and EB was higher than that of NaOH under all hydrogen sulfide inlet concentration conditions. If microorganisms grow on the packing material filled inside the scrubber, treatment efficiency may decrease. In order to prevent this phenomenon, the microbial growth inhibitory function of alternative materials was evaluated, and CB, EB, and NB were all superior to NaOH. As a result of this study, it was shown that CB and EB can replace NaOH because they have excellent performance in removing hydrogen sulfide and inhibiting microbial growth.

This study was carried out to investigate the growth characteristics, yield and chemical compositions of whole crop barley (Hordeum vulgare L.) according to mixing ratio of chemical fertilizer (CF) and liquid swine manure (LSM) in the paddy field cultivation. The experimental design was arranged in a randomized block design with five treatments and three replications. The manure fertilizer ratio of five treatments were CF 100% (T1), CF 70% + LSM 30% (T2), CF 50% + LSM 50% (T3), CF 30% + LSM 70% (T4), and LSM 100% (T5) of whole crop barley. At this time, the application of liquid swine manure was based solely on the nitrogen. Plant length was higher at T1 as compared to other treatments (T2, T3, T4 and T5). Fresh yield, dry matter yield and total digestive nutrients (TDN) yield were the highest in T1, whereas the lowest in T5 treatment (p<0.05). Chemical compositions (crude protein, crude fat, neutral detergent fiber, acid detergent fiber and TDN) did not show significant difference among treatments. Ca and Na contents were significantly lower at T1 as compared to other treatments (T2, T3, T4 and T5). However, Mg and P contents were significantly higher at T1 as compared to other treatments(p<0.05). There was no significant difference in total free sugar content among T2, T3, T4 and T5 treatments, but the chemical fertilizer (T1) was significantly lower than the other treatments (p<0.01). Considering the above results, liquid swine manure application showed lower dry matter yield and TDN yield than chemical fertilizer, but higher free sugar content. Therefore, in order to increase the productivity of whole crop barley, it is considered desirable to mix liquid fertilizer with chemical fertilizer, taking into account the decomposition rate and insufficient components (P, K) of the liquid swine manure.

This study analyzed the factors affecting the effectiveness of the Chemical Hazard Risk Management (CHARM). A survey was conducted on 104 learners who participated in the Risk Assessment training course at Occupational Safety and Health Training Institute. Through a self-administered questionnaire, the effect of personal characteristics, corporate characteristics, and safety and health level of the company on the effectiveness of chemical risk assessment was investigated. As a result of statistical analysis, the safety and health level of the company had a positive (+) effect on the effectiveness of Chemical Hazard Risk Management(CHARM), but personal characteristics and corporate characteristics had no relation to it. This study can be used as basic data for further research related to chemical risk assessment in workplaces.

This study aims to distinguish between various Ethiopian durum wheat varieties based on their genetic identity using chemical and morphological characterization of seeds. Combinatorial employment of five chemical tests on seeds showed marked qualitative variation among the test varieties, with high discriminatory potential noted for the standard phenol test, followed by the modified phenol and iodide tests. The modified phenol test was instrumental in further discriminating between the varieties that were not identified using the standard phenol test. Unlike the iodide and phenol tests, the NaOH and KOH tests did not show significant variation among the varieties. These results underscore the efficacy of phenol and iodide tests in differentiating between durum wheat varieties. Although the morphological traits were advantageous in seed characterization, they lacked discriminatory power compared with that of the chemical tests. This study concludes that a single test is inadequate for varietal discrimination; rather, a combination of chemical tests can augment the discriminatory potential.