This study was conducted to secure basic information for corn processing by comparing the quality characteristics according to maize cultivars and kernel types (dent, intermediate, flint-like). As a result of analyzing 15 cultivars, a range of measurements were observed: 100-kernel weight, 22.89~35.63 g; moisture, 7.57~8.42%; crude protein, 8.46~11.45%; crude lipids, 3.26~4.83%; Hunter’s L-value, 83.70~86.79; a-value, 2.61~5.49; b-value, 22.01~28.15; and total carotenoids, 6.74~17.07 μg/g. Significance among the cultivars was shown in all quality characteristics (p<0.001), but the significance among the kernel types was found only in crude protein (p<0.005), crude fat (p<0.001), and Hunter’s L-value (p<0.05). The hardness of maize was decreased proportionally to the soaking time for all maize cultivars (p<0.001). In particular, with the same soaking time for different kernel types, the hardness difference was shown in the order of flint-like > dent ≒ intermediate. It was confirmed that the decrease in the hardness of flint-like kernel of close to that of hard-type starch was slowed compare dent and intermediate kernels. So it is expected the some characteristic of kernel types will contribute to the appropriate customized use of the developed cultivars.

목적: 본 연구에서는 경증 알츠하이머형 및 경도 인지장애를 대상으로 노인용 전산화 인지평가도구의 타당도를 알아보기 위하여 예비연구를 실시하였다. 연구방법: 신경과 의사의 진단을 받고 임상치매평가척도(CDR) 검사를 실시한 치매환자에게 치매선별용 간이정신상태 검사(MMSE-DS) 및 노인용 전산화 인지평가(COSAS)를 실시한 후 인지기능검사 도구 사이의 상관관계를 비교하였다. 연구 참여에 자발적으로 동의한 경도인지장애 및 알츠하이머형 치매 진단 환자 30명을 대상으로 2019년 1월 11일부터 2월 29일까지 간이정신상태검사MMSE-DS, COSAS를 평가하였으며, 신경과 전문의에 의해 실시된 CDR점수와 비교하였다. 결과: COSAS와 MMSE-DS의 총점은 서로 정 상관관계(r=.846)를 보였으며 통계적으로 유의미하였다(p<0.01).COSAS와 CDR의 총점은 역 상관관계(r=-.589)를 보였으며 통계적으로 유의미하였다(p<0.01). COSAS 평가도구의 하위항목 중 기억력(p<0.01), 고위인지기능(p<0.01), 집중력(p<0.01), 시·지각능력(p<0.05)에서 MMSE-DS 총점과 유의한 상관관계를 보였다. 결론: 본 연구에서는 MMSE-DS, CDR, COSAS 도구의 상관분석 결과를 통해 향후 치매환자의 인지기능 평가 및 개발을 위한 근거자료로써 유용하게 활용될 수 있음을 검증하였다. 또한, COSAS가 치매환자의 인지기능 선별 및 세부영역을 평가하기 위한 목적으로 지역사회와 의료시설에서 유용하게 사용될 수 있는 도구임을 제시한다.

PURPOSES : The purpose of this study is to analyze the impact of the level of the light-environment and the driver's visual ability on the change in the driver's perception of a forward curved section at night. The study also aims to identify factors that should be considered to ensure safety while entering curved sections of a road at night. METHODS : Data collected from a virtual driving experiment, conducted by the Korean Institute of Construction Technology (2017), were used. Logistic regression was applied to analyze the effects of changes in the light-environment factors (road surface luminance and glare) and the driver’s visual ability on a driver's perception of the road. Additionally, analysis of the moderated effect of visual ability on light-environment factors indicated that the difference in drivers’ visual abilities impact the influence of light-environment factors on their perception. A driver's ability to perceive, as a response variable, was categorized into 'failure' and 'success' by comparing the perceived distance and minimum reaction sight distance. Covariates were also defined. Road surface luminance levels were categorized into 'unlit road surface luminance' (luminance ≤ 0.1 nt) and 'lit road surface luminance' (luminance > 0.1 nt), based on 0.1 nt, which is the typical level observed on unlit roads. The glare level was categorized as 'with glare' and 'without glare' based on whether the glare was from a high-beam caused by an oncoming vehicle or not. The driver's visual ability level was categorized into 'low visual ability' (age ≥ 50) and 'high visual ability' (age ≤ 49), considering that after the age of 50, the drive’s visual ability sharply declines. RESULTS : The level of road surface luminance, glare, and driver's visual ability were analyzed to be significant factors that impact the driver's ability to perceive curved road sections at night. A driver's perception was found to reduce when the road surface luminance is very low, owing to the lack of road lighting ('unlit road luminance'), when glare is caused by oncoming vehicles ('with glare'), and if the driver's visual ability level is low owing to an older age ('low visual ability'). The driver's ability to perceive a curved section is most affected by the road surface luminance level. The effect is reduced in the order of glare occurrence and the driver's visual ability level. The visual ability was analyzed as a factor that impacts the intensity of the effect of change of the light-environment on the change of the driver's ability to perceive the road. The ability to perceive a curved section deteriorates significantly in 'low visual ability' drivers, aged 50 and above, compared to drivers with 'high visual ability,' under the age of 49, when the light-environment conditions are adverse with regard to the driver’s perception (road surface luminance: 'lit road surface luminance'→'unlit road surface luminance,' glare: 'without glare'→'with glare'). CONCLUSIONS : Supplementation, in terms of road lighting standards that can lead to improvements in the level of light-environment, should be considered first, rather than the implementation of restrictions on the right of movement, such as restricting the passage of low visual ability or aging drivers who are disadvantageous in terms of gaining good perception of the road at night. When establishing alternatives so that safety on roads at night is improved, it is necessary to consider improving drivers' perception by expanding road lighting installation. The road lighting criteria should be modified such that the glare caused by oncoming traffic, which is an influential factor in the linear change in perception, and the level of light-environment thereof are improved.

방사성폐기물의 심층처분에서 생물권에서의 방사성 핵종 이동을 핵종의 이동 경과 시간을 계산하여 평가하는 방법이 제안 되었다. 방사성 핵종은 자연 방벽에서 유출되어 지하 천부의 지하수 흐름을 따라 대규모 지표수체에 도달한다고 가정하였다. 생물권은 기반암 위에 있는 대수층을 포함하는 천부 지하 환경으로 정의하였다. 제안된 방법을 이용하여, 계산 알고리즘을 수립하였고, 알고리즘을 수행하는 컴퓨터 코드를 작성하였다. 작성된 코드는 간단한 사례에서 계산된 모의 결과를 해석해 계산 결과 및 지표 부근에서의 방사성 핵종 이동에 의한 방사선량 평가에 널리 이용되는 공공 프로그램의 계산 결과와 비교하여 검증하였다. 사례 연구 조건을 가상의 심층처분장에서의 방사성 핵종 이동에 대한 이전 연구를 통해 작성하였다. 작성된 코드는 사례 연구에서 생물권의 하천으로 유출되는 핵종의 이동량을 계산하였다. 이전 연구에서는 가상의 처분장에서 모암까지의 방사성핵종의 이동만을 보여주었기 때문에, 이 코드는 모든 경로를 지나가는 방사성 핵종의 전체적인 이동을 파악하는데 도움이 될 수 있었다.

A variety of composite powders having different aluminum and carbon contents are prepared using various organic solvents having different amounts of carbon atoms in unit volume as ball milling agents for titanium and aluminum ball milling. The effects of substrate temperature and post-heat treatment on the texture and hardness of the coating are investigated by spraying with this reduced pressure plasma spray. The aluminum part of the composite powder evaporates during spraying, so that the film aluminum content is 30.9 mass%~37.4 mass% and the carbon content is 0.64 mass%~1.69 mass%. The main constituent phase of the coating formed on the water-cooled substrate is a non-planar α2 phase, obtained by supersaturated carbon regardless of the alloy composition. When these films are heat-treated at 1123 K, the main constituent phase becomes  phase, and fine Ti2AlC precipitates to increase the film hardness. However, when heat treatment is performed at a higher temperature, the hardness is lowered. The main constitutional phase of the coating formed on the preheated substrate is an equilibrium gamma phase, and fine Ti2AlC precipitates. The hardness of this coating is much higher than the hardness of the coating in the sprayed state formed on the water-cooled substrate. When hot pressing is applied to the coating, the porosity decreases but hardness also decreases because Ti2AlC grows. The amount of Ti2AlC in the hot-pressed film is 4.9 vol% to 15.3 vol%, depending on the carbon content of the film.

This experiment was aimed to identify concentrations of mineral nutrients in leaf lettuce (Lactuca sativa) grown on hydroball aquaponics and in the water for growing fish by conducting two experiments. The experiment I (Expt. I) was conducted with 12 fishes (F12) with and without filter, hydroball and plants (H12 (12 fishes, hydroball), FHP12 (12 fishes, filter, hydroball, 6 plants) and HP12 (12 fishes, hydroball, 6 plants)), and the experiment II (Expt. II) was with and without plants (FH15 (15 fishes, filter, hydroball), FHP15 (15 fishes, filter, hydroball, 6 plants)). The pH level in the water of all the treatments was decreased during the growing period, and the pH and EC of the water were lower in all the treatment with plants than those without plants in both Expt. I and Expt. II. When compared with adequate nutrient concentrations for hydroponics, nitrate nitrogen (NO3-N) and phosphorus (P) concentrations in the fish growing water were higher under the FHP15 treatment in Expt. II; however, potassium (K), calcium (Ca), and magnesium (Mg) were only 16, 49, and 82% of hydroponics, representatively, and iron (Fe) was not detected. The fresh weight of lettuce harvested from the FHP15 treatment was 38 g, only a 30% of marketable lettuce yield. The T-N and P contents of the leaf tissue grown under the FHP15 treatment were close to the optimal level; however, the K, Ca, and iron (Fe) contents were less than the optimal with no deficiency symptom.

PURPOSES : Concrete pavement is excellent in structural performance and durability. However, its functionality – such as noise and skid resistance – is a shortcoming. Functionality such as noise reduction and skid resistance of concrete pavement is affected by the texture surface, and the texture surface is classified according to the length of the wavelength. In recent years, Fine-size exposed aggregate concrete pavement has been applied, which has excellent structural performance and durability, and secures functionalities such as noise reduction and long-term skid resistance by randomly forming texture surface. Fine-size exposed aggregate concrete pavements are constructed by removing the surface cement binder to randomly expose coarse aggregate and their functionality is mainly governed by the surface texture. However, deteriorated concrete by tire-pavement friction and deicing agent may cause abrasion and aggregate loss on the surface texture; thus reducing their functional performances. Abrasion is created by the thin cutoff of aggregate texture under repeated tire-pavement friction. In addition, aggregate loss is defined by the detachment of aggregates from cement binder. This study aims to evaluate the abrasion and aggregate loss of Fine-size exposed aggregate concrete pavement surface texture under tire-pavement friction and scaling tests. METHODS : In the study, abrasion and aggregate loss of tining and exposed aggregate concrete surface treatments were evaluated. Deterioration of each surface treatment was replicated by scaling test under ASTM C 672 test method. Afterward, abrasion test was conducted by ASTM C779 to simulate the tire-pavement friction under traffic. Consequently, abrasion and aggregate loss were measured. RESULTS : Abrasion depth of non-scaling tining, 10-mm EACP, and 8-mm EACP was 1.76, 1.12, and 1.01mm, respectively. Compared to scaling surface treatments, the difference of abrasion depth in tining texture was the largest with value of 0.4mm. For both textures of finesize exposed aggregate concrete, abrasion depth difference was about 0.1mm. Moreover, The 10-mm EACP exhibited a 2.6% of aggregate loss rate caused by tire-pavement friction before conducting concrete deterioration test. After 40-cycle scaling test, aggregate loss increased up to 12.2%. For 8-mm EACP, aggregate loss rate was 1.7% on non-scaling concrete. Further, this rate was magnified up to 7.3% for the 40-cycle scaling concrete. CONCLUSIONS : Under non-scaling or scaling tests, fine-size exposed aggregate concrete pavement showed better abrasion resistance than tining texture since tining was formed by aggregates and cement binder. Additionally, rate of aggregate loss was significant when EACP experienced the deicing agent under numerous cycles of freeze-thaw action.

PURPOSES: The noise problem in concrete pavements has an adverse effect to the road user or nearby residents and is generated by the contact between a tire and the pavement surface. Exposed aggregate concrete pavements have been adopted to solve the tire-pavement noise problem in the United States and Europe. However, the efficiency of the coagulation retarder and exposure equipment used for this kind of pavement has not yet been investigated. Therefore, this study aims to evaluate the ability of the coagulation retarder and exposure equipment in producing the optimum exposed aggregate texture to achieve low pavement noise. A method for the exposure time selection has also been introduced here. METHODS: Sodium gluconate retarders were selected for use in this study. The retarder-water ratios of 1:1, 1:2, and 1:3 were investigated. The retarder was sprayed on a fresh concrete surface with rates of 200 g/m2, 300 g/m2, and 400 g/m2. The aggregates were then exposed to the surface using a steel brush and a water jet. The efficiencies for the low-noise texture, workability, and environmental impact produced by the two exposure devices were estimated. The EAN and the MTD were investigated according to the exposure time. RESULTS : The aggregates were exposed after the retarder was sprayed on the fresh concrete surface; the exposure lasted for 18 h to 26 h each time. The retarder-water ratio of 1:2 and the spraying rate of 300 g/m2 produced an optimum surface texture for low noise. Additionally, the steel brush performed more effectively in exposing aggregate to the surface compared to the water jet. The selected exposure time window (ETW) was 28 h to 35 h. CONCLUSIONS : The optimum retarder was the sodium gluconate retarder with a retarder-water ratio of 1:2 and a spraying rate of 300 g/m2. The steel brush showed a good performance in exposing the aggregates and showing the efficiency of the coagulation retarder in the given environment so as to produce the quality control condition. The ETW was influenced by the construction, mixture design, and construction environment; however, the selected ETW in this study was 26 h~35 h.

PURPOSES : In many European countries, the fine-size exposed aggregate concrete pavement (EACP) technique has been adopted for a quiet pavement. However, different noise reduction levels were reported based on the mixture design and texture conditions. This study aims to suggest a quality control condition for achieving low-noise texture and a mixture design procedure for exposed aggregate concrete overlay (EACO), which will provide the optimum mixture of the surface texture that can reduce the tire-pavement noise. METHODS : The tire-pavement noise is highly influenced by the pavement surface texture. The surface texture of the EACP can be quantified by the mean texture depth (MTD) and the exposed aggregate number (EAN). The optimum condition for the low-noise texture of the EACP was investigated herein based on the analysis of the review of the texture conditions and noise measurement in many EACP sites. RESULTS : The MTD and EAN criteria can be derived according to the investigated relationship between noise and texture condition. The optimum mixture design to satisfy these criteria can be achieved by controlling the maximum size of the coarse aggregate and the S/a. CONCLUSIONS: This study aimed to suggest a quality control condition for achieving low-noise texture and an optimum mixture design for EACO. As a result, we found that the early traffic opening of EACO can be achieved by using high early-strength cement.

본 연구는 봄에서 여름 재배기에 토마토를 암면배지 재배에서 누적일사량급액방식(ISR)과 물관수액흐름 속도에 따른 급액방식(SF)에서 급배액량, 수분흡수량, 과실 생육 및 과실 생산량, 과실비대속도를 관찰하였다. 정식 후 28일에서 82일 까지 총급액량은 SF 제어구에서 약 5.0L 적게 소비되었으나 지상부와 과실 생체중은 유의차가 없었고 수분이용효율(WUE)과 과실 200g을 생산하는데 소요된 물량도 두 처리 간 유의차가 없었다. 정식 후 58일에서 82일까지 급액방식에 따른 실시간 광량과 물관수액흐름속도 상관관계를 관찰하였을 때 상관관계(r2)는 SF제어구에서 더 높게 나타났다. 정식 56일부터 82일까지 실시간 측정된 과경비대속도와 배지함수율의 상관관계를 살펴본 결과 SF제어구에서 야간과 낮 시간대에 ISR제어구 보다 높았고 특히 야간 시간대에 상관관계가 더 높게 나타났다. SF제어구의 물관수액흐름속도와 수분부족분(Humidity Deficit: HD)과의 상관관계(r2=0.6286)도 광량과의 관계만큼 높게 나타났다. 더 많은 현장 연구를 통해 수확량, WUE 및 센서의 정확도과 같은 특성에 관한 결과들을 도출하였을 때 상업적 수경재배 농장 재배자의 관심을 얻을 수 있을 것으로 보인다.

The prediction of Jominy hardness curves and the effect of alloying elements on the hardenability of boron steels (19 different steels) are investigated using multiple regression analysis. To evaluate the hardenability of boron steels, Jominy end quenching tests are performed. Regardless of the alloy type, lath martensite structure is observed at the quenching end, and ferrite and pearlite structures are detected in the core. Some bainite microstructure also appears in areas where hardness is sharply reduced. Through multiple regression analysis method, the average multiplying factor (regression coefficient) for each alloying element is derived. As a result, B is found to be 6308.6, C is 71.5, Si is 59.4, Mn is 25.5, Ti is 13.8, and Cr is 24.5. The valid concentration ranges of the main alloying elements are 19 ppm < B < 28 ppm, 0.17 < C < 0.27 wt%, 0.19 < Si < 0.30 wt%, 0.75 < Mn < 1.15 wt%, 0.15 < Cr < 0.82 wt%, and 3 < N < 7 ppm. It is possible to predict changes of hardenability and hardness curves based on the above method. In the validation results of the multiple regression analysis, it is confirmed that the measured hardness values are within the error range of the predicted curves, regardless of alloy type.

Since the discovery of the first artificial synthetic plastic, bakelite, polymer materials have been recognized as one of the most innovative fields of research. The plastic debris that is being piled up on the earth (called abandoned plastic litters) is now being observed everywhere on Earth, becoming an increasingly serious environmental threat. The term 'microplastics', created in 2004, now refers to plastic particles that are smaller than 5 mm, including all nano-sized plastic particles. However, there is no legal regulation, and there is still a lack of comprehensive definitions that practically include microplastic size standards. In this study, we will refer to “microplastics” as the English name, and look at how to identify these microplastics and propose new definitions that focus on their size. This study is expected to contribute to the domestic consensus on scientific definitions of microplastics.

목적 : 뇌졸중 후 연하장애 중재에 포함된 임상가의 조기 접근을 위해 신경근전기자극(Neuromuscular Electronic Stimulation; NMES)와 비 침습성 뇌자극(Non-Invasive Brain Stimulation; NIBS)를 적용한 무작위 대조실험(Randomized Controlled Trials; RCTs) 연구의 메타분석을 통해 구체적인 효과와 방안을 제시하고자 한다. 연구방법 : Pubmed, CINAHL(EBSCOhost), Psycinfo, 한국학술정보원(Korean Studies Information Service System; KISS), 학술연구정보서비스(Research Information Sharing Service; RISS)를 통하 여 2008년부터 2019년까지의 논문을 검색하였다. 주요 용어는 “stroke OR CVA OR cerebrocascular accident OR vascular accident” AND “dysphagia OR swallowing disorder OR deglutition disorder” AND “tDCS OR transcranial direct current stimulation OR rTMS OR repetitive transcranial magnetic stimulation OR NMES OR neuromuscular electronic stimulation” AND “RCT OR randomized control trial”, “뇌졸중” 그리고 “연하장애 또는 삼킴곤란” 그리고 “경두개 자기자극 또는 경두개 직류자극 또는 신경근 전기자극” 그리고 “무작위대조실험”을 사용하였다. 포함기준과 배제기준을 적용하여 총 11개의 연구가 분석 대상으로 사용되었다. 결과 : 경두개 직류자극(Transcranial Direct Current Stimulation; tDCS)의 전기자극 강도는 1mA, 경 두개 자기자극(Repetitive Transcranial Magnetic Stimulation; rTMS)의 전기자극 강도는 3~5Hz, 신 경근 전기자극(Neuromuscular Electronic Stimulation; NMES)의 전기자극 강도는 8~15mA로 다양했으며, tDCS와 rTMS는 큰 효과크기, NMES는 중간 효과크기로 나타났다. 결론 : 본 연구는 메타분석을 통해 3가지 치료에 대한 효과를 확인하고 환자 특성과 중재 방향에 따라 다양한 결과를 확인할 수 있었다. 3가지 치료는 국내 뇌졸중 후 연하장애 회복에 효과가 있으며 안전하다고 판단한다. 향후 연하장애 회복을 이끄는 다양한 요인에 대한 명확한 연구가 활발히 이루어져야 할 것이다.

최근 수경재배에서 가장 많이 사용되는 친환경 유기배 지인 코이어 배지를 사용하였을 때 코이어 칩과 더스트 비율, 급액량에 따라 멜론의 생육과 과실 품질을 분석하고 봄 재배시 코이어 배지를 이용한 멜론 수경재배의 기초 자료를 제공하고자 본 연구를 수행하였다. 실험에 사용한 2 종류의 코이어 배지는 칩과 더스트의 비율이 각각 3:7, 5:5이었으며, 배액률 10, 20, 30% 수준으로 급액하였을 때 멜론의 생육과 품질 변화, 배지의 물리적 ·화학적 변화를 분석하였다. 배액률 10%를 기준으로 양액을 공급한 처리구는 총 급액량이 주당 91L로 급액량이 가장 많은 배액률 30% 처리구에 비해 약 30% 절감되었다. 총 배액량 또한 급액량이 가장 적은 배액률 10% 처리구에서 주당 10L 이하로 낮은 값을 나타내었다. 더스트 비율이 높은 칩:더스트 3:7 배지는 5:5 배지 보다 총 배액량이 약 30-70% 감소하였다. 급액량이 많고 더스트 비율이 높은 3:7 배지를 사용했을 경우 엽생육과 과실 비대가 좋았고 당도는 품종 간 차이가 컸다. 배액률 30%를 기준으로 급액하면 배액률 10% 기준으로 급액하였을 때보다 과중이 21% 증가하였다. 더스트의 비율이 높은 3:7 배지는 5:5 배지보다 용기용수량, 공극 률 등 배지 물리성이 우수하였고, 재배 기간 중 네트발 현기 이후 배액 EC가 3.0-6.8dS·m-1로 높은 값을 나타내 었다. 재배 품종 특성 및 재배 조건 등을 고려하여 적정한 양수분 관리를 하면 코이어 배지를 이용한 수경재배 시 고품질의 멜론을 생산할 수 있을 것으로 판단된다.

본 연구는 이화령, 육십령, 벌재 등 백두대간 마루금 생태복원사업지에서 복원사업 5년 경과 후 토양특성과 소나무 생장을 모니터링하고 토양특성이 소나무 생장에 미치는 영향을 분석하였다. 복원사업은 소나무 조림목을 이용하여 2012년-2013년에 완료되었으며, 2018년 4월에 각 복원사업지에서의 토양을 채취하고, 소나무의 수고와 흉고직경을 측정하였다. 토양 pH는 복원초기에 비해 크게 변화가 없었으나, 이화령과 벌재에서 7.7과 6.4의 높은 값을 보였다. 복원초기에 비해 유기물함량은 전반적으로 70-80%가 감소하였고, 유효인산은 크게 변화가 없었다. 유기물함량의 감소는 복원 후 초기 고사유기물의 유입 및 분해가 제한됨에 따라 나타난 것으로 판단된다. 소나무 수고생장률(m yr-1)은 지역에 따라 유의한 차이를 보였는데, 육십령 에서 1.02로 가장 높았으며, 그 뒤로 벌재(0.75), 이화령(0.17)순이다. 수고생장률은 토양 pH, 양이온함량(Na, Ca 등)과 부의 상관관계를 보인 반면, 유효인산과는 양의 상관관계를 보였다. 특히 이화령 지역의 저조한 소나무 생장률은 높은 토양 pH로 인한 낮은 양분가용성과, 높은 Na와 Ca 농도로 인한 뿌리로의 수분흡수 저해로 인한 것으로 판단된다. 한편 복원 5년 경과 후 나타난 유기물함량의 급격한 감소는 향후 화학비료, 바이오차 등을 이용한 토양개량이 필요할 것으로 보인다.

본 연구에서는 다른 광환경에서 자란 긴산개나리(Forsythia saxatilis var. lanceolata) 줄기와 잎의 항산화물질 함량 및 활성을 분석하여 기능성 신소재로 활용하기 위한 기초자료를 마련 하고자 수행하였다. 삽목 후 3년생인 긴산개나리를 무작위로 채취하여 부위별로 분석한 결과, 긴산개나리 잎의 항산화물질 함량은 총 안토시아닌 함량과 총 플라보노이드 함량, 총 페놀 함량이 각각 68.8mg CGE/100g FW, 7405.0mg CE/100g FW, 4231.2mg GAE/100g FW로 줄기보다 높았으며, 항산화 활성 또한 294.3mg VCE/100g FW로 줄기보다 높은 것으로 조사되 었다. 이에 따라 긴산개나리의 항산화물질 함량과 활성간의 상관관계를 분석한 결과, 총 안토시아닌은 다른 요인 간의 상관관계가 없는 것으로 나타났으나 총 플라보노이드와 총 페놀은 서로 간에 0.05 유의수준 내에서 r=0.753으로 양의 높은 상관관계를 가지며, 총 플라보노이드와 총 페놀은 항산화 활성인 DPPH radical 소거활성과 0.05 유의수준 내에서 각각 r=0.753, 0.698 로 높은 양의 상관관계를 갖는 것으로 조사되었다. 이를 통해 긴산개나리의 총 페놀은 대부분 총 안토시아닌보다 총 플라보 노이드로 구성된 것으로 판단되고, 이러한 총 플라보노이드와 총 페놀이 항산화 활성에 기여하는 것으로 판단된다. 서로 다른 광환경에서 삽목 후 3년동안 생육한 긴산개나리의 부위별 항산 화물질 함량 및 활성을 분석한 결과, 총 안토시아닌, 총 플라보 노이드, 총 페놀은 반음지(42.83μmol･m-2 ･s-1 PPFD)보다 양지 (788.39μmol･m-2 ･s-1 PPFD)에서 생육한 긴산개나리의 잎에서 함량이 높은 것으로 조사되었으며, 항산화 활성도 반음지보다 양지에서 생육한 긴산개나리의 잎에서 높은 것으로 나타났다. 광환경에 따라 긴산개나리의 엽록소 함량을 조사한 결과, 엽록소 함량 또한 양지에서 생육한 긴산개나리 잎에서 높은 것으로 조사되었다. 이를 통해, 페놀화합물과 vitamin C 는 광합성 과정 중 합성되는 물질이기 때문에 반음지보다 광량이 많은 양지에서 생육한 긴산개나리의 잎이 항산화물질 함량과 활성이 높은 것으로 판단된다. 따라서, 긴산개나리는 줄기보다 잎에 항산화물질 함량 및 활성이 높아 천연항산화제로서 가능성이 있는 것으로 판단되며, 특히, 양지에서 생육한 긴산개나리의 잎이 반 음지에서 생육한 것보다 항산화물질 및 활성이 높기 때문에 기능성 소재로서 잠재적 활용 가능성이 높을 것으로 판단된다.