Two sewage treatment facilities were selected to identify odor emission characteristics, focusing on volatile organic compounds (VOCs) and sulfur compounds. The complex odor, 5 kinds of sulfur compounds and 23 kinds of VOCs were analyzed from gas and sludge storages. Hydrogen sulfide was detected in the highest concentration and had the highest odor quotient among the odorous compounds monitored in this study, demonstrating that the contribution of hydrogen sulfide to the complex odor reached up to 90%. For VOCs, the overall contribution to the complex odor was not critical but VOCs can sufficiently trigger an odorous sensation because the sum of the odor quotient reached up to 2.89.

본 총설은 다양한 저널 게재 논문으로부터 분리막 및 광촉매의 혼성 정수/하수 처리 공정을 요약하였다. 이 총설에는 (1) 분리막 광촉매 반응기(membrane photoreactor, MPR), (2) 분리막 결합 광촉매 공정에서 막오염 관리, (3) 유기 오염 물의 분해를 위한 광촉매 분리막 반응기, (4) 정수처리용 막분리 공정과 광촉매 분해의 결합, (5) 휴믹산 분해를 위한 광촉매 및 세라믹 막여과의 혼성공정, (6) 활성슬러지 여과를 위한 한외여과의 막오염에 이산화티타늄 나노입자의 영향, (7) 정수처 리용 광촉매 및 정밀여과의 혼성시스템, (8) 선박 평형수 처리용 한외여과 및 광촉매의 혼성공정 및 (9) 분리막 및 광촉매 코팅 프로필렌 구의 혼성수처리 공정이 포함되어 있다.

The Anaerobic fluidized bed bioreactor (AFBR) treating synthetic wastewater to simulate domestic sewage was operated under GAC fluidization to provide high surface area for biofilm formation. Although the AFBR achieves excellent COD removal efficiency due to biological activities, concerns are still made with nutrient such as nitrogen remaining in treated wastewater. In this study, FO membrane was applied to treat the effluent produced by AFBR. Removal efficiency with total nitrogen (TN) was investigated with draw solution (DS, NaCl) and hydrodynamic condition (i.e., recirculation flow rate) along FO membranes. Permeability of FO membrane increased with increasing DS concentration. About 85% of TN removal efficiency was observed with the FO membrane using 1 M of NaCl DS. During operational period of a day, no permeate flux decline was observed.

본 연구에서는 해수를 유도용액으로 사용하고 하수처리수를 공급수로 사용하는 정삼투막 공정의 유기/바이오 오염물에 의한 막오염을 저감하기 위해 폴리도파민/탄소 나노 튜브 복합 분리막을 제작하였다. 분리막은 기존 계면중합반응에 탄소 나노 튜브를 첨가하여 초박형 복합 분리막을 제조한 후, 폴리도파민으로 코팅시켜 제조하였다. 제작 된 분리막은 알긴산나트륨(Sodium alginate)용액과 미생물(Pseudomonas aeruginosa PA01) 부착 실험을 통하여 수투과도와 막오염도를 평가하였다. 그 결과, 폴리도파민/탄소 나노 튜브 복합 분리막은 복합되지 않은 분리막에 비하여 높은 수투과도와 낮은 막오염 성능을 보였다.

In this study, various physical cleaning methods such as physical washing and osmotic backwash, were conducted to understand membrane fouling properties by employing real secondary wastewater effluent (SWWE). In addition, microfiltration (MF) and ultrafiltration (UF) pretreatments were compared to maximize removal of organic matter and to control membrane fouling efficiently. Organic foulants deposited on the active layer of FO membrane were observed by fouling behavior test. The relationship between concentrations of natural organic matter and membrane fouling was also investigated from the bench-scale FO tests.

2012년부터 강화된 총인의 농도를 준수하기 위해서는 응집에 의한 물리화학적 처리가 필수적인 후단공정이 되었으며, 현재 국내 하수처리시설 중 약 60%의 처리시설에서 총인처리시설이 설치되었다. 하지만 총인처리시설 운전에 따른 응집제 사용량이 증가하게 되었고, 이에 따라 약품 비용 및 슬러지 처리비 증가 등의 운영비가 상승하였다. 특히 분리막 공법(MBR)의 경우 막 투과수의 응집액 부족으로 인한 응집효율 저하 및 응집제의 과다 주입으로 인한 처리수질 악화 등의 문제가 발생하는 경우도 있다. 본 연구에서는 MBR 공법내에서 별도의 총인처리시설 필요 없이 생물학적 인제거를 극대화 하는 동시에 응집제 사용량을 최소화하면서 처리수의 인농도를 0.2 mg/L 이하로 유지할 수 있는 방안을 도출하고자 하였다.

Phosphorus (P) is a limited, essential, and irreplaceable nutrient for the biological activity of all the living organisms. Sewage sludge ash (SSA) is one of the most important secondary P resources due to its high P content. The SSA has been intensively investigated to recover P by wet chemicals (acid or alkali). Even though H2SO4 was mainly used to extract P because of its low cost and accessibility, the formation of CaSO4 (gypsum) hinders its use. Heavy metals in the SSA also cause a significant problem in P recovery since fertilizer needs to meet government standards for human health. Therefore, P recovery process with selective heavy metal removal needs to be developed. In this paper some of the most advanced P recovery processes have been introduced and discussed their technical characteristics. The results showed that further research is needed to identify the chemical mechanisms of P transformation in the recovery process and to increase P recovery efficiency and the yields.

This study aimed to investigate the feasibility of improving dewaterability and settleability of sewage sludge using coagulation sludge. When mixed with sewage sludge and coagulation sludge at 1:1 ratio, capillary suction time(CST) and specific resistance to filtration(SRF) decreased by about 56% and 68%, respectively. It is found that total solids(TS) and volatile solids(VS) of mixing sludge are increased by about 59% and 53%, respectively. Also, the turbidity of the mixing sludge supernatant was reduced from 99 to 16 NTU. It is observed that the mixing of sewage sludge and coagulation sludge at 1:1 showed better effect than using poly-aluminum chloride(PAC) coagulant at 25 mg/L.

Due to the sewer induced ground subsidence, there is an increasing demand for the advanced visual inspection technique for the existing sewer pipe structures. This study aim to develop a new condition assessment method using visual inspection device with automatic crack extracting and real-time gas monitoring systems for large diameter glass-fiber reinforced plastic sewer pipes. In this paper, a high-precision image capturing system that automatically extracts cracks in the large-diameter sewer pipes and sewage culverts with a diameter of 1,000 mm or more, and a real-time gas detection sensor for investigator safety were considered. By analyzing the module technology of the visual inspection device, the test device and their software for system integration were developed. It is expected that the developed technique inspecting conditions of the GFRP sewer pipes using the proposed visual inspection device in this study can be effectively used for various types of underground structures in the future.

This study investigated phosphorus removal from secondary treated effluent using coagulation-membrane separation hybrid treatment to satisfy strict regulation in wastewater treatment. The membrane separation process was used to remove suspended phosphorus particles after coagulation/settlement. Membrane separation with 0.2 μm pore size of micro filtration membrane could reduce phosphorus concentration to 0.02 mg P/L after coagulation with 1 mg Al/L dose of polyaluminum chloride (PACl). Regardless of coagulant, the residual concentration of phosphorus decreased as the dose increased from 1.5 to 3.5 mg Al/L, while the target concentration of 0.05 mg P/L or less was achieved at 2.5 mg Al/L for the aluminum sulfate (Alum) and 3.5 mg Al/L for PACl. Moreover, alum showed better membrane flux as make bigger particles than PACl. Alum showed a 40% of flux decrease at 2.5 mg Al/L dose, while PACl indicated a 50% decrease of membrane flux even with a higher dose of 3.5 mg Al/L. Thus, alum was more effective coagulant than PACl considering phosphorus removal and membrane flux as well as its dose. Consequently, the coagulation-membrane separation hybrid treatment could be mitigate regulation on phosphorus removal as unsettleable phosphorus particles were effectively removed by membrane after coagulation.

본 연구에서는 막결합생물반응조(MBR)공법을 비롯한 하수고도처리공법에서 유입하수량의 변화에 따른 슬러지 특성 변화를 파악하고자 하였다. 일 1.5톤을 처리하는 모형실험시설에서 설계유량 대비 유입하수량을 100, 70, 40, 10%로 변 화시켜가며 이에 따른 비탈질속도(specific denitrification rate)와 비질산화속도(specific ammonia oxidation rate)의 변화를 측 정하였다. 각 공법의 폭기조에서 채취한 슬러지의 비질산화속도는 유입하수량 100% 조건에서 세 가지 공법 모두 유사한 값 (0.10 gNH4/gMLVSS/day)으로 측정되었다. 유입하수량이 70%에서 40%로 감소함에 따라 비질산화속도가 크게 감소하는 경향을 나타냈다. 비탈질속도 역시 유입하수량이 감소함에 따라 최대 50%가량 감소하였다. 유입하수량이 감소할수록 비탈질속 도와 비질산화속도가 감소하는 경향을 나타냈으나 원수의 총질소 농도와 반응조 내 미생물 농도를 고려하면 질소제거율에 영향을 미칠 정도는 아니었다. 따라서 유입하수량이 감소하는 경우에도 반응조 내 미생물 농도를 높게 유지할 수 있다면 안정적인 질소 제거가 가능할 것으로 판단된다.

As the 3D laser scanning technology capable of databaseing large sewage box culverts becomes possible, it is necessary to develop a standardization manual that can clearly distinguish the structural and operational defect types of box culver and analyze the defect data. In this study, we collected and analyzed defects in sewage box culverts of 14,827m in total by selecting three districts in Korea. The major defects were surface damages, and their defect densities were 2.17 m2/m, 0.27 m2/m and 0.10 m2/m for aggregate exposure, Steel reinforcement exposure, and Steel reinforcement projecting. In order to support the decision of the box culverment management, it was divided into five grades and each defect code and defect score were allocated. The results of this study are useful for the diagnosis of the sewage box culverts in Korea and it is expected to support a decision making for management.

As the modern society is rapidly developing and people become affluent in materials, many new chemical compounds in different forms of products (e.g., antibiotics, pesticides, detergents, personal care products and plastic goods) are produced, used, and disposed of to the environments. Some of them are persistently having a harmful impact on the environment and mimicking endocrine properties; in general they are present in the environment at low concentrations, so they are called organic pollutants. These organic micropollutants flow to sewage treatment plants via different routes. In this study, the generation characteristics, exposure pathways, detection levels, and environmental impacts of organic micropollutants were critically reviewed. In addition, currently available risk assessment methods and management systems for the compounds were reviewed. The United States Environmental Protection Agency (US EPA), for example, has monitored organic micropollutants and set the monitoring and management of some of the compounds as a priority. To effectively manage organic micropollutants in sewer systems, therefore, we should first monitor organic micropollutants of potential concern and then make a watch list of specific substances systematically, as described in guidelines on listing water pollutants in industrial wastewater.

Deep learning techniques have been studied and developed throughout the medical, agricultural, aviation, and automotive industries. It can be applied to construction fields such as concrete cracks and welding defects. One of the best performing techniques of deep running is CNN technique. CNN means convolutional neural network. In this study, we analyzed crack recognition of sewer with low recognition. Deep learning is generally more accurate with deeper layers, but analysis cost is high. In addition, many variations can occur depending on training options. Therefore, this study performed many parametric studies according to the variations of training options. When analyzed with appropriate training options, the accuracy was over 90% and stable results were obtained

Odor emission factors (OEFs) are important parameters in characterizing odor sources, understanding emission patterns, designing abatement facilities, and providing appropriate control methods. In this study, OEFs for complex odor from grit removal chambers in publicly-owned wastewater treatment plants were determined, and the major operating conditions affecting the emission factors were investigated. In the main study site of “S” wastewater treatment plant, the averaged OEFs from the grit chamber were found to be 466.2, 162.6, and 54.7 OU/m2/min in summer, spring, and winter, respectively. OEFs from two other grit chambers in different wastewater plants were independently measured for comparison, and the values were in the same range as the OEF from S-site at a 95% confidence level. Nevertheless, the OEFs could differ depending on the types of wastewater and the sizes of wastewater treatment plants. Using the multi-variable linear regression method, correlations between OEFs and operating conditions, i.e. activities, from grit chambers were statistically analyzed. The analyses showed that operating conditions, including total suspended solids, water temperature, and temperature difference between water and air, were the most significant parameters affecting the OEF. A linear equation using these three parameters was proposed to estimate the OEF, and can be used to predict an OEF for another grit chamber, without odor measurement.

(주)에코니티에서 개발한 자유말단형 분리막모듈(End-Free type)은 기존 분리 막 모듈과는 달리 고농도의 MLSS(Mixed Liquor Suspended Solids) 에서도 지속적인 운전이 가능하며, 그 외 다양한 현장 문제 발생 시에서도 쉽게 대응이 가능하여 안정적으로 운영이 가능한 특징을 가지고 있다. 본 연구에서는 (주)에코니티 자유말단형 분리막의 MBR(Membrane Bioreactor) 장기 운전 성능을 평가하였다. 운영을 하는 동안 발생하는 이벤트에 대한 해결 방안을 확인하면서 최적의 운전조건을 검토하였다. 또한 하수처리수가 재이용으로 적용되는 시스템에서 MBR 처리수가 역삼투 멤브레인의 원수로 공급되는 만큼 안정적이며 양호한 수질이 생성되는지 지속적으로 검토하였다.

The small-scale sewage treatement system with A2/O process was applied to evaluate applicability for Mongolian sewage, It was designed to have 10 m3/d flowrate and installed in Ulaanbaatar, Mongolia. During over 6month operation BOD, COD, TN, TP removal efficiency were measured and operation condition was optimized. In addition, MLSS concentration its internal circulation rate and DO were adjusted properly. BOD, COD showed average 88 perecent of removal and TN and TP achieved 81 percent and 88 percent removal efficency, respectively. Maxium influent concentration of BOD, COD, TN and TP was 214 mg/L, 300 mg/L, 24.3 mg/L and 5 mg/L respectively, which were decreased to 4.1 mg/L, 5.6 mg/L, 1.3 mg/L and 0.15 mg/L by the test system. This study show possibility tham small-scale sewage treatment system could be a useful system for scattered sewage wastewater treatment.

반 건조 소화 하수슬러지와 폐플라스틱을 혼합하여 파일롯 규모(85.3kg/hr)의 연속식 저온 (510℃~530℃) 열분해 실험을 하였다. 실험결과 열분해가스 발생량은 투입물 건량의 최대 68.3%, 발열 량은 40.9 MJ/Nm3 이었으며, 연속식 열분해에 따른 외기 유입율이 19.6%이었다. 오일은 투입물 건량 의 4.2%가 발생하였고, 저위발열량은 32.5 MJ/kg 이었으며 시설부식 등을 일으킬 수 있는 황과 염소의 함량이 각각 0.2% 이상이었다. 투입물 건량의 27.5%가 발생한 탄화물의 저위 발열량은 10.2 MJ/kg 이 었고, 용출시험 결과 지정폐기물에 해당하지 않았다. 열분해가스의 연소 배가스는 일산화탄소, 황산화물, 시안화수소 등의 배출농도가 특히 높았고, 다이옥신 (PCDDs/DFs)은 0.034 ng-TEQ/Sm3 로서 법적 기 준치 이내였다. 건조 배가스 응축으로 발생한 폐수는 수질오염물질 47개 항목 중 총질소, n-H 추출물질, 시안 등의 고농도 항목이 많아 전처리 후 하수처리장 등에서의 병합처리 방식을 고려할 필요가 있었다.

평관형 알루미나 세라믹 멤브레인을 적용한 실험실 규모의 단독 혐기성 유동상 멤브레인 생물반응기 (Anaerobic Fluidized Bed Ceramic Membrane Bioreactor, AFCMBR) 하수처리 적용 가능성을 평가하였다. 단독 AFCMBR은 25℃에서 395일 간 합성폐수의 평균 유입 COD 260 mg/L에서 연속운전 되었다. 운전기간 동안 약 25 mg/L의 NaOCl 용액을 주입하여 주기적인 유지세정으로 멤브레인 투과플럭스 14.5-17 L/m².hr 달성이 되었다. 투과수의 용해성 COD는 1시간 HRT 에서 23 mg/L 이었고 고형물 발생량은 0.014 gVSS/gCODremoved였다. 단독 AFCMBR 운전 요구 전기에너지는 0.038 kWh/m³ 이었고 생산되는 메탄발생 전기에너지의 약 17%에 해당되었다.