Magnetite nanoparticles(NPs) have been the subject of much interest by researchers owing to their potential use as magnetic carriers in drug targeting and as a tumor treatment in cases of hyperthermia. However, magnetite nanoparticles with 10 nm in diameter easily aggregate and thus create large secondary particles. To disperse magnetite nanoparticles, this study proposes the infiltration of magnetite nanoparticles into hybrid silica aerogels. The feasible dispersion of magnetite is necessary to target tumor cells and to treat hyperthermia. Magnetite NPs have been synthesized by coprecipitation, hydrothermal and thermal decomposition methods. In particular, monodisperse magnetite NPs are known to be produced by the thermal decomposition of iron oleate. In this study, we thermally decomposed iron acetylacetonate in the presence of oleic acid, oleylamine and 1,2 hexadecanediol. We also attempted to disperse magnetite NPs within a mesoporous aerogels. Methyltriethoxysilicate(MTEOS)-based hybrid silica aerogels were synthesized by a supercritical drying method. To incorporate the magnetite nanoparticles into the hybrid aerogels, we devised two methods: adding the synthesized aerogel into a magnetite precursor solution followed by nucleation and crystal growth within the pores of the aerogels, and the infiltration of magnetite nanoparticles synthesized beforehand into aerogel matrices by immersing the aerogels in a magnetite nanoparticle colloid solution. An analysis using a vibrating sample magnetometer showed that approximately 20% of the magnetite nanoparticles were well dispersed in the aerogels. The composite samples showed that heating under an inductive magnetic field to a temperature of 45˚C is possible.

The research presents an application of Balanced ANOVA (BANOVA) by utilizing randomized orders for various Split-Plot Designs (SPDs) which include two cell designs, split-plot with one-way HTC (Hard to Control) factor, split-plot with two-way HTC factor, split-split-plot design and nested design. In addition, four MINITAB examples of 2-level split-plot designs based on the number of blocks and the type of whole-plots are presented for practitioners to obtain comprehensive understanding. Furthermore, the geometrical interrelated properties among three typical Designs of Experiments (DOE), such as Factorial Design (FD), Response Surface Design (RSD), and Mixture Design (MD) are discussed in this paper.

Alloy 617, Ni-22Cr-12Co-9Mo base oxide dispersion strengthened alloy was fabricated by using mechanical alloying, hot isostatic pressing and hot rolling. Uniaxial tensile tests were performed at room temperature and at . Compared with the conventional Alloy 617, ODS alloy showed much higher yield strength and tensile strength, but lower elongation. Fracture surfaces of the tensile tested specimens were investigated in order to find out the mechanism of fracture mode at each test temperature. Grain adjustment during tensile deformation was analyzed by electron backscattered diffraction mapping, inverse pole figures and TEM observation.

Hydrophobic nanodiamond (ND) were dispersed in engine oil (Helix Oil, Shell co.) as an additives to improve tribology properties. In this study, nanodiamond prepared by an explosive method was used. Tribology properties of both pure Helix oil and engine oil containing ND additive were evaluated. The rotating disks were made of Gray Cast Iron (240 Hv) and SKD11 (710 Hv). Surface topographies of the disks' wear tracks and friction coefficient were compared. The results show that nanodiamond-dispersed lubricants are capable of reducing these metals' wear loss. The friction coefficient is strongly affected to the hardness of wear track.

본 논문에서는 진동중인 교량 단면에 작용하는 풍하중을 산정하고 그에 따른 플러터 발생풍속을 예측하기 위하여 분산형 전산환경을 활용한 수치해석 연구를 수행하였다. 분산형 전산환경은 웹 포탈을 기반으로 수치해석 환경을 제공하는 일종의 수치풍동 시스템으로서, 전산유체역학 (CFD: Computational Fluid Dynamics) 에 대한 전문지식이 부족한 사용자들도 격자생성, 수치해석자를 이용한 계산, 가시화 등의 전 과정을 편리하게 수행할 수 있는 차세대 토목분야 계산 환경이다. 본 연구 환경의 검증을 위해 수치해석자에 적용된 지배방정식은 2차원 비정상 Navier-Stokes 방정식으로서, 교량의 움직임을 모사하기 위하여 동적격자 기법을 도입하였다. 또한 계산된 비정상공기력을 적용하여 플러터 발생풍속을 산정하였으며, 그 결과는 기존의 실험결과와 잘 일치함을 확인하였다.

This paper describes the fabrication of AlN thin films containing iron and iron nitride particles, and the magnetic and electrical properties of such films. Fe-N-Al alloy films were deposited in Ar and N2 mixtures at ambient temperature using Fe/Al composite targets in a two-facing-target DC sputtering system. X-ray diffraction results showed that the Fe-N-Al films were amorphous, and after annealing for 5 h both AlN and bcc-Fe/bct-FeNx phases appeared. Structure changes in the FeNx phases were explained in terms of occupied nitrogen atoms. Electron diffraction and transmission electron microscopy observations revealed that iron and iron nitride particles were randomly dispersed in annealed AlN films. The grain size of magnetic particles ranged from 5 to 20 nm in diameter depending on annealing conditions. The saturation magnetization as a function of the annealing time for the Fe55N20Al25 films when annealed at 573, 773 and 873 K. At these temperatures, the amount of iron/iron nitride particles increased with increasing annealing time. An increase in the saturation magnetization is explained qualitatively in terms of the amount of such magnetic particles in the film. The resistivity increased monotonously with decreasing Fe content, being consistent with randomly dispersed iron/iron nitride particles in the AlN film. The coercive force was evaluated to be larger than 6.4×103Am-1 (80 Oe). This large value is ascribed to a residual stress restrained in the ferromagnetic particles, which is considered to be related to the present preparation process.

본 연구에서는 2000년부터 2008년 사이에 출생한 Duroc종, Landrace종 및 Yorkshire종 종돈의 총 31,455 두의 농장검정 자료를 이용하여 다형질 동물 모형과 다변량 모체효과 모형에 의한 돼지 경제형질의 유 전적 분산성분을 추정하였다. 품종별 조사된 각 형질에 있어서 다변량 모체효과 모형을 이용하여 추정된 상가적 효과에 의한 유전력이 모체효과에 의한 유전력보다 모두 높게 나타났으며, 다형질 동물 모형에서 상가적 효과만 고려했을 때의 유전력이 다변량 모체효과 모형에서 추정된 상가적 효과의 의한 유전력보 다 대부분 높게 추정되었다. 다변량 모체효과 모형을 이용하여 추정된 모체효과에 의한 육종가와 표현형 가와의 상관관계에 있어서 대부분 낮은 정(+)의 상관이거나 강한 부(-)의 상관관계를 보여 품종별 각 형 질에 있어서 모체효과를 적절히 고려하여 육종가와 표현형의 상관관계를 높인다면 보다 나은 개량을 도 모 할 수 있을 것으로 사료된다.

Carbon-nanotube-embedded bismuth telluride (CNT/) matrix composites were fabricated by a powder metallurgy process. Composite powders, whereby 5 vol.% of functionalized CNTs were homogeneously mixed with alloying powders, were successfully synthesized by using high-energy ball milling process. The powders were consolidated into bulk CNT/ composites by spark plasma sintering process at for 10 min. The fabricated composites showed the uniform mixing and homogeneous dispersion of CNTs in the matrix. Seebeck coefficient of CNT/ composites reveals that the composite has n-type semiconducting characteristics with values ranging to with increasing temperature. Furthermore, the significant reduction in thermal conductivity has been clearly observed in the composites. The results showed that CNT addition to thermoelectric materials could be useful method to obtain high thermoelectric performance.

The research proposes the three-factor random measurement models for estimating the precision about operator, part, tool, and various measurement environments. The combined model with crossed and nested factors is developed to analyze the approximate F test by degrees of freedom given by Satterthwaite and point estimation of precisions from expected mean square. The model developed in this paper can be extended to the three useful models according to the type of nested designs. The study also provides the three-step procedures to evaluate the measurement precisions using three indexes such as SNR(Signal-To-Noise Ratio), R&R TR(Reproducibility&Repeatability-To-Total Precision Ratio), and PTR(Precision-To-Tolerance Ratio), The procedures include the identification of resolution, the improvement of R&R reduction, and the evaluation of precision effect.

생식 첨가량을 3.7-11.7%로 조절한 생식음료의 분산안정성을 터비스캔을 사용하여 광학적 방법으로 측정하였다. 생식음료는 제조 후 시간이 경과함에 따라 음료 하부에서는 침전이 생성되어 후방산란광플럭스(이후 후광플럭스로 약칭)가 강해진 반면, 중간부에서는 청징현상에 의해 약해졌으며, 최상층부에서는 거품이 생성되어 다시 강해졌다. 생식 첨가량이 증가할수록 침전이 서서히 진행되었으며 전체 침전층은 두텁게 형성되었다. 침전에 의한 후광플럭스의 퍼센트변화율의 시간에 따른 변화는 로그 모델이 적용되었으며 결정계수는 0.979-0.988로 높은 값을 보였다. 생식 첨가량은 생식음료의 상층부에 형성되는 청징층과 하층부의 침전층의 경계면, 즉 청징층 선단의 이동속도 뿐 만 아니라 분리된 층의 수에도 영향을 미쳤다. 생식 첨가량 3.7%의 경우는 2층으로, 5.7-9.7%의 경우는 3개 층으로, 11.7%는 4개 층으로 분리되었다. 생식음료 제조 후 17-29분 사이에 1차 청징층 발생이 시작되었고 22-53분간 지속되었으며, 생식첨가량이 낮을수록 청징층 두께는 증가하였다. 청징층 발생은 생식 첨가량 7.7%인 음료에서 가장 늦게 나타나 최대 분산안정성을 보였다.

In this study, we analyzed the effect of silicon oxynitride matrix on the optical properties of Au nanoparticles dispersed on composite film and explored the effectiveness of the silicon in fine tuning the refractive index of the composite film for applications in optical waveguide devices. The atomic fraction of nitrogen in SiOxNy films was controlled by varying the relative flow ratio of nitrogen gas in reactive sputtering and was evaluated optically using an effective medium theory with Bruggeman geometry consisting of a random mixture between SiO2 and Si3N4. The Au nanoparticles were embedded in the SiOxNy matrix by employing the alternating deposition technique and clearly showed an absorption peak due to the excitation of surface plasmon. With increasing nitrogen atomic fraction in the matrix, the surface plasmon resonance wavelength shifted to a longer wavelength (a red-shift) with an enhanced resonance absorption. These characteristics were interpreted using the Maxwell-Garnett effective medium theory. The formation of a guided mode in a slab waveguide consisting of 3 μm thick Au:SiOxNy nanocomposite film was confirmed at the telecommunication wavelength of 1550 nm by prism coupler method and compared with the case of using SiO2 matrix. The use of SiOxNy matrix provides an effective way of controlling the mode confinement while maintaining or even enhancing the surface plasmon resonance properties.

Concurrent Engineering (CE) has presented new possibilities for successful product development by incorporating various product life-cycle functions from the earlier stage of design In the product design, geometric representation is vital not only in its

BaTiO3/epoxy composites have been widely investigated as promising materials for embedded capacitors in printed circuit boards. It is generally known that the dielectric constant (K) of the BaTiO3/epoxy composites increases with improvement of the dispersion of BaTiO3 particles in the epoxy matrix that comes from adding surfactant. The influences of surfactant addition on the dielectric properties of the BaTiO3/epoxy composites are reported in the present study. The dielectric constant of the BaTiO3/epoxy composites is not significantly affected by the surfactant addition. However, the temperature coefficient of capacitance increases and the peel strength decreases as the amount of added surfactant increases. The influences of surfactant addition on the dielectric properties of the neat epoxy are also very similar to those of the BaTiO3/epoxy composites. The residual surfactant in the BaTiO3/epoxy composites affects the temperature coefficient of capacitance and the peel strength of the epoxy matrix, which in turn affects the temperature coefficient of capacitance and the peel strength of the BaTiO3/epoxy composites.