본 연구의 목적은 컨테이너 육묘 시스템을 활용한 참외 접목 묘의 안정적인 생산 가능성을 평가하는 것이었다. 이를 위해, 컨테이너 육묘 시스템과 고온 조건의 플라스틱 온실에서 육묘 한 접수와 대목, 접목묘의 생육을 비교 분석하였다. 접목활착 후 육묘 환경에 따른 참외 접목묘의 생육과 묘소질을 0일, 4일, 7일, 11일, 14일째에 비교하였다. 컨테이너 육묘 시스템에서 는 주야간 온도를 25/20°C, 상대습도를 70%로 설정하여 재 배기간 동안 안정적으로 유지하였으며, 플라스틱 온실 내의 주야간 평균온도는 28.1/15.4°C로 주야간 온도차(DIF)가 더 크게 나타났다. 조사기간 동안 참외 접목묘의 초장은 플라스 틱 온실 육묘 처리구에서 컨테이너 육묘 시스템 처리구보다 더 길게 나타났다. 참외 접목묘 조직의 충실도는 지상부 건물 중을 초장으로 나누어 계산하였다. 육묘장에서 접목한 묘는 접목 후 7－10일 경과하여 활착이 완료되고 초장이 10cm 내 외일 때 출하하여 정식에 이용되게 된다. 본 연구에서 접목활 착 후 7일째에 컨테이너 육묘 시스템에서 재배된 묘의 충실도 는 44.9±2.64mg/cm으로 나타났으며, 플라스틱 온실 육묘 처 리구에서는 24.4±1.56mg/cm로 나타났다. SPAD 평균은 플 라스틱 온실 육묘에서 30.5, 컨테이너 육묘 시스템에서 41.1 로 측정되었다. 이러한 결과는 컨테이너 육묘 시스템의 활용 이 고온기 또는 저일조 시기와 같은 육묘 환경에서도 고품질 모종을 안정적으로 생산할 수 있는 것을 확인하였고, 인공광 을 이용한 육묘 시스템의 활용 범위가 앞으로 더 확대될 것으 로 기대된다.

1개월과 3개월 장기 예보를 지원하기 위해 기상청에서 현업운용 중인 GloSea6 기후예측시스템에는 대기 중 대 기화학-에어로졸 물리과정(UKCA)이 연동되어 있지 않다. 본 연구에서는 저해상도의 GloSea6와 여기에 대기화학-에어로 졸 과정을 연동시킨 GloSea6-UKCA를 CentOS 기반 리눅스 클러스터에 설치하여 2000년 봄철에 대한 예비적인 예측 결과를 살펴보았다. 현업 고해상도 GloSea6 모델이 방대한 전산자원을 필요로 한다는 점을 고려할 때, 저해상도 GloSea6와 GloSea6-UKCA 모델은 대기화학-에어로졸 과정의 연동에 따른 효과를 살펴보기에 적합하다. 저해상도 GloSea6와 GloSea6-UKCA는 2000년 3월 1일 00Z부터 75일 간 구동되었으며, 두 모델이 예측한 2000년 4월 지상 기온과 일평균 강수량의 공간 분포를 ERA5 재분석자료와 비교하였다. GloSea6-UKCA가 예측한 기온과 강수 분포는 기존 GloSea6에 비해 ERA5 재분석자료에 보다 더 유사해졌다. 특히 우리나라를 포함한 동아시아 지역에 대해 과대 모의 경 향이 있던 봄철 지상 기온과 일평균 강수량의 예측 결과의 개선이 주목할 만하다. 또한 적분 시간에 따른 예측된 기온 과 강수량의 시계열에서도 GloSea6-UKCA가 GloSea6보다 재분석자료에 더 가까워진 시간 변화 경향을 살펴볼 수 있었 다. 이는 대기화학-에어로졸 과정이 GloSea6에 연동되었을 때 동아시아지역 봄철 예측 성능이 개선될 수 있음을 보여준다.

In this study, we have developed a movable defect detection system based on a vision module with machine-learning algorithm for distinguishing product quality. Machine-learning model determined the results in good or no good through images acquired from the vision module consisting of a camera, processor unit, and lighting. To ensure versatility for use in a variety of settings, we have integrated a robot arm and cart for the movable defect detection system, and the robot arm that adjusts the focus length is made to be able to rotate in all directions. The type of defect was divided into eccentricity defect and printing defect. As a result, it was confirmed that classification accuracy showed 0.9901 in our developed device.

This study developed an IoT-based agricultural well control system and demonstrated it through a control system in the current state of domestic open-field smart farms where systematic management is insufficient due to the difficulty of collecting accurate data such as agricultural water intake and usage. As a result, it was possible to derive the optimal control system test results according to the watering conditions for each schedule by conducting automatic control focusing on periods when there is no precipitation. This means that irrigation can be carried out smoothly during the time when irrigation is needed to improve crop quality and secure farm income, and as a result, it is possible to systematically manage and operate among demonstration farms connected to irrigation, resulting in a shortage of agricultural water and a resolution of supply imbalances.

For motor controller designers, building a simulation environment is not a difficult process. After verifying the controller by simulation, it is common to select 20kHz for the current control loop, 1kHz for the speed loop, and 100Hz for the position loop when implementing the actual HW embedded system. This is because maximized cycles (20kHz) for each control loop are unnecessary in control theory and are a waste of cost and HW resources. However, in a simulation environment, each loop will often have the same control cycle (20kHz maximum). This is because we think it is unnecessary to reflect this part in the simulation. In this paper, it is shown that the difference in the sampling time of each control loop makes a big difference in the simulation result, and as a solution, it is proposed to apply LPF to the position loop output stage. In the process, the reasons for the differences were analyzed, and the effect of LPF, the reason for application, and the feasibility of implementation were proved by actual software coding.

An in-wheel motor is a system in which a drive motor is mounted inside a wheel along with a braking device, and the motor inside the wheel directly drives the wheel. An SR motor drive in replace of the conventional PM motor drive for in-wheel motor system has been proposed and analyzed. Two different types of converters were selected and their feasibility in terms of different current control schemes was analyzed and validated through dynamic simulation using PSIM software.

In this study, a condensate drain valve was newly installed in the steam inlet pipe line of the soot blower to reduce the amount of condensate contained in the steam for the soot blower. When the economizer is inactive, the condensate drain valve on the soot blower steam inlet pipe line is always opened to drain the condensate. It is intended to reduce environmental pollution and improve economizer performance by reducing the water hammer that inevitably occurs in facilities using steam, and reducing the amount of condensate water generated during the shutdown of the soot blower and the release of soot containing condensate water into the atmosphere when removing soot.

In this paper, a tidal power conversion system (PCS) using seawater level differences was presented.. To verify the presented PCS, an actual lab-scale tidal power generation system was constructed. The operation of the lab-scale PCS was first modeled mathematically and was analyzed through dynamic simulation and experimental tests.

항만 내 선박과 부두의 사고를 예방하기 위하여 통항 및 접안 안전성 평가를 통하여 안전한 부두가 건설되어 관리하고 있으나, 선 박의 접안 및 계류 과정에서 선박이 부두에 충돌하거나 로프로 인한 인명사고의 발생 등 예측할 수 없는 사고들이 종종 발생한다. 자동계류장 치는 선박의 신속하고 안전한 계류를 위한 자동화된 시스템으로 로봇 매니퓰레이터와 흡착 패드로 구성된 탈/부착 메커니즘을 가지고 있다. 본 논문은 자동계류장치의 흡착 패드의 위치 및 속도제어에 필요한 선체와의 변위 및 속도 측정 시스템을 다룬다. 자동계류장치에 적합한 측 정 시스템을 설계하기 위하여, 본 논문은 우선 센서의 성능 및 실외 환경적 특성 분석을 수행한다. 다음으로 이러한 분석 결과를 토대로 실외 부두환경에서 설치되는 자동계류장치에 적합한 변위 및 속도 측정시스템의 구성 및 설계 방법에 대해 기술한다. 또한 센서의 측정상태 감지 및 속도 추정을 위한 알고리즘을 제시한다. 제안된 방법은 다양한 속도 구간에서의 변위 및 속도 측정 실험을 통해 그 유용성을 검증한다.

This study aimed to develop a solid self-nanoemulsifying drug delivery system (solid-SNEDDS) to enhance the formulation of ketoconazole (KTZ), a BCS Class II drug with poor solubility. Ketoconazole, which is insoluble above pH 3, requires solubilization for effective delivery. This SNEDDS comprises oil, surfactant, and co-surfactant, which spontaneously emulsify in the gastrointestinal tract environment to form nanoemulsions with droplet sizes less than 100 nm. The optimal SNE-vehicle composition of oleic acid, TPGS, and PEG 400 at a 10:80:10 weight ratio was determined based on the smallest droplet size achieved. This composition was used to prepare liquid SNEDDS containing ketoconazole. The droplet size and polydispersity index (PDI) of the resulting liquid SNEDDS were analyzed. Subsequently, solid-SNEDDS was fabricated using a spray-drying method with solidifying carriers such as silicon dioxide, crospovidone, and magnesium alumetasilicate. The physicochemical properties of the solid-SNEDDS were characterized by scanning electron microscopy and powder X-ray diffraction, and its solubility, droplet size, and PDI were evaluated. In particular, the solid-SNEDDS containing ketoconazole and crospovidone in a 2:1 weight ratio exhibited significantly enhanced solubility, highlighting its potential for improved medication adherence and dissolution rates.

Many changes in the scale and structure of the Korean rice cropping system have been made over the past few decades. Still, insufficient research has been conducted on the sustainability of this system. This study analyzed changes in the Korean rice cropping system’s sustainability from a system ecology perspective using an emergy approach. For this purpose, an emergy table was created for the Korean rice cropping system in 2011, 2016, and 202, and an emergy-based indicator analysis was performed. The emergy analysis showed that the total emergy input to the rice cropping system decreased from 10,744E+18 sej year-1 to 8,342E+18 sej year-1 due to decreases in paddy field areas from 2011 to 2021, and the proportion of renewable resources decreased by 1.4%. The emergy input per area (ha) was found to have decreased from 13.13E+15 sej ha-1 year-1 in 2011 to 11.89E+15 sej ha-1 year-1 in 2021, and the leading cause was a decrease in nitrogen fertilizer usage and working hours. The amount of emergy used to grow 1 g of rice stayed the same between 2016 and 2021 (specific emergy: 13.3E+09 sej g-1), but the sustainability of the rice cropping system (emergy sustainability index, ESI) continued to decrease (2011: 0.107, 2016: 0.088, and 2021: 0.086). This study provides quantitative information on the emergy input structure and characteristics of Korean rice cropping systems. The results of this study can be used as a valuable reference in establishing measures to improve the ecological sustainability of the Korean rice cropping system.

PURPOSES : This study is to develop an comprehensive validation methodology for autonomous mobility-on-demand system with level 4 automated driving system. METHODS : The proposed method includes the quantitative techniques for validating both automated driving system and center system using each optimal indicators. In addition, a novel method for validating the whole system applying multi-criteria decision methodology is suggested. RESULTS : The relative weights for the vehicle system was higher than the center systems. Moreover, the relative weights of failure rate for validating the vehicle system was the highest, in addition to, a relative weight for accuracy of dynamic routing algorithm within center system was the highest. CONCLUSIONS : The proposed methodology will be applicable to validate the autonomous mobility on demand system quantitatively considering the relative weights for each systems.

PURPOSES : This study is to analyze the reduction effect on road pavement damage from the installation of weigh-in-motion systems used for overloaded vehicle enforcement, from the perspective of traffic assignment. METHODS : Fixed-demand multi-class traffic assignment was conducted by VISUM, a macroscopic traffic simulation software. We considered three vehicle classes and calculated the traffic load for each road link using the ESAL(Equivalent Single Wheel Load) factor, as proposed by ASHTTO(American Association of State Highway and Transportation Officials). We set up scenarios with weigh-in-motion installations in certain sections and observed how the traffic load changed before and after the installation of weigh-in-motion for each scenario. RESULTS : Three main trends were observed. Firstly, at points where weigh-in-motion systems were installed, traffic load significantly decreased even with the influx of cars and trucks following the restriction of overloaded trucks, highlighting the significant influence of overweight vehicles on the traffic load. Secondly, even when overweight vehicles detoured, there was no significant change in the overall network's traffic load. Lastly, the detour of overweight vehicles led to an increase in the total driving distance and time for all vehicles. CONCLUSIONS : Installing weigh-in-motion systems in sections with a lower structure number, which indicates thinner road pavement, can prevent damage in those specific areas without affecting the entire road network.

PURPOSES : The wedge-type anchorage system requires a complex analysis of not only the tensile stress of the CFRP plate, but also the compressive stress and shear stress generated by the wedge action. The purpose of this study is to find a composite material failure theory that is suitable for analyzing the behavior of wedge-type anchorage system among various failure theories. METHODS : In this study, numerical analysis of various composite material failure theories was performed to analyze the anchorage strength and failure mode of the wedge-type anchorage system according to each failure theory, and compared with actual test results to determine the composite material failure theory most suitable for analyzing the behavior of a wedge-type anchorage system. RESULTS : Since the Maximum Stress failure theory shows similar results to the actual test in terms of failure mode and anchorage strength, there is no significant problem in applying it to the wedge-type anchorage system. However, it is judged to be difficult to apply under property conditions where interactions between stresses are highlighted. The Tsai-Hill and Tsai-Wu failure theories are considered unsuitable for application to wedge-type anchorage systems because the wedge angle conditions at which the most advantageous anchorage strength occurs are significantly different from other theories and the fracture type cannot be predicted. The Hashin-Rotem failure theory is considered to be the most appropriate to apply as a failure theory for the wedge-shaped anchorage system because the anchorage strength was slightly lower than the actual test results, but there was no significant difference, and the failure mode was consistent with the test results. The Hashin failure theory is judged to be unsuitable for application as a failure theory for the wedge-type anchorage system because the anchorage strength and failure mode were interpreted differently from the actual test results. CONCLUSIONS : The Hashin-Rotem failure theory was presented as the composite material failure theory most suitable for analyzing the behavior of wedge-type anchorage system.

본 연구는 언어의 공공성과 전문성에 대한 문제의식에서 기획되었다. 이를 위해 전문 영역인 유전자변형생물체[LMO] 관련 공공기관 홈페이지 를 비교 분석하여 공공언어 사용 실태를 파악하였다. 그 결과 다음과 같 은 시사점을 이끌어 낼 수 있었다. 장르적 측면에서 LMO 홈페이지들은 ‘안내문’의 특성을 보이며, 주제어를 홈페이지 화면 전면에 제시하여 공공 언어의 수용성과 접근성을 제고하였다. 다음으로 표기의 정확성 측면에 서 전문 용어 및 법령, 관련 규정, 약어(略語) 표기의 통일성과 일관성 확보가 필요하다는 것을 확인하였다. 소통성 측면에서는 LMO와 GMO의 개념 정의 및 설명 방식에 통일성과 일관성을 확보하여 전문 용어의 이 해도를 높일 것을 제안하였다. 또한 각 기관 홈페이지가 비교적 생산 목 적에 맞게 정보를 제공하고 있지만 기관 업무 특성에 따른 접근성과 편 의성 확보의 필요성을 강조하였다. 소통성을 강화하기 위해 관계기관 협 의에서 ‘공공언어적인 관점 반영’을 안건으로 선정할 것을 제언한다.

Recently, due to the expansion of the logistics industry, demand for logistics automation equipment is increasing. The modern logistics industry is a high-tech industry that combines various technologies. In general, as various technologies are grafted, the complexity of the system increases, and the occurrence rate of defects and failures also increases. As such, it is time for a predictive maintenance model specialized for logistics automation equipment. In this paper, in order to secure the operational safety and reliability of the parcel loading system, a predictive maintenance platform was implemented based on the Naive Bayes-LSTM(Long Short Term Memory) model. The predictive maintenance platform presented in this paper works by collecting data and receiving data based on a RabbitMQ, loading data in an InMemory method using a Redis, and managing snapshot DB in real time. Also, in this paper, as a verification of the Naive Bayes-LSTM predictive maintenance platform, the function of measuring the time for data collection/storage/processing and determining outliers/normal values was confirmed. The predictive maintenance platform can contribute to securing reliability and safety by identifying potential failures and defects that may occur in the operation of the parcel loading system in the future.

This study aimed to investigate the effect of Liriope platyphylla and organic acids on enteric methane mitigation in goats using an open-circuit simplified respiration chamber system. Methane recovery was evaluated by injecting 3% standard methane gas for 30 min at 3 L/min. The percentage of methane recovery from the four chambers was 99±5.4%. Following the recovery test, an animal experiment was conducted using eight castrated Boer goats (body weight 46.6±7.77 kg) using a 2×2 crossover design. Experimental diets were as follows: 1) Control (CON), commercial concentrate and tall fescue, and 2) Treatment (MIX), concentrate supplemented with L. platyphylla and organic acids and tall fescue. Goats were offered feed at 2% of body weight (dry matter basis) in equal portions twice daily at 8:00 and 15:30. The goats were adapted to the feed and methane chamber for 10 and 3 days, respectively. Methane emission was measured one day per goat using tunable diode laser absorption spectroscopy, and temperature and airflow measurements were used to estimate methane emissions. Dry matter intake (DMI), body weight, and methane emission were measured during each period. Methane production with CON and MIX was 24.48 and 22.68 g/d, respectively, and 26.81 and 24.83 g/kg DMI, respectively. Although the differences were not significant, the use of supplements resulted in a numerical reduction in methane in MIX compared with CON. Collaboration with experts in other areas, including various engineering departments, is imperative to measure methane emissions using a chamber system accurately.

PURPOSES : The number of snowfall and the amount of snowfall are gradually increasing, and due to the characteristics of Seoul, which has a lot of traffic, it is difficult to respond quickly with a snow removal method that relies on snow removal vehicles. Therefore, it is necessary to develop an IoT based eco-friendly snow removal system that can respond to unexpected heavy snow in winter. In this study, the low temperature operation and snow removal performance of the IoT road condition snow removal detector and the snow removal system using CNT and PCM are evaluated in the climatic environment chamber. METHODS : To make artificial snow, it consists of an climatic environment chamber that can simulate a low temperature environment and equipment that can supply compressed air and cold water. Depending on the usage characteristics of the climatic environment chamber, use an air-water type snow maker. In order to make artificial snow, wet temperature, which takes into account the actual air temperature and the amount of moisture in the air, acts as the most important variable and is suitable for making snow, below –1.5 ℃. The lower the water temperature, the easier it is to freeze, so the water source was continuously supplied at 0 ℃ to 4 ℃. One of the two different pipes is connected to the water tank to supply water, and the other pipe is connected to the compressor to supply high-pressure air. Water is dispersed by compressed air in the form of many small droplets. The sprayed microscopic water particles freeze quickly in the low temperature environmental climatic chamber air and naturally fall to the floor, forming snow. Based on the KS C IEC 60068-2-1 cold resistance test standard, an integrated environmental test procedure was prepared to apply to IoT-based snow removal systems and performance evaluation was performed accordingly. The IoT based eco-friendly snow removal system is needed to in winter, so visual check and inspect the operation at the climatic chamber before setting up it to the actual site. In addition, grid type equipment was manufactured for consistent and reliable snow removal performance evaluation under controlled environmental conditions. RESULTS : The IoT-based eco-friendly snow removal system normally carried out the task of acquiring data and images without damaging the appearance or freezing in a low temperature environment. It showed clear snow removal performance in areas where PCM and CNT heating technology were applied to the concrete slab. This experiment shows that normal snow removal tasks can be carried out in low temperature environments in winter. CONCLUSIONS : The integrated environmental test procedures and grid type evaluation equipment are applied to low temperature operation and snow removal performance evaluation of snow removal systems. In the climatic environment chamber, where low temperature environments can be simulated, artificial snow is created regardless of the season to derive quantitative experimental results on snow removal performance. PCM and CNT heating technology showed high snow removal performance. The system is expected to be applied to road site situations to preemptively respond to unexpected heavy snow in winter.