본 연구는 선박에서 발생할 수 있는 화재연기의 위험성을 인식시키고 비상대응능력을 향상시키기 위해 선내에 안전교육을 위 한 환경을 구축하고 시나리오를 개발 운영하면서 획득한 실습생의 상황별 이동특성을 측정분석한 것으로, 그 결과를 정리하면 다음과 같다. 연기가 없는 조건에서는 익숙한 이동경로에 장애가 발생한 경우와 그렇지 않은 경우의 각 피난이동 상대속도 사이에 차이가 없지만, 실내에 연기가 충진되어 가시도가 매우 낮은 조건에서는 시야불량에 따른 이동능력 저하로 인해 그렇지 않은 경우에 비해 평균상당속도 가 62.5% 감속되었다. 시나리오에 관계없이 단순이동경로에 비해 복잡이동경로의 평균 상당속도가 빠르고 표준편차도 작게 나타났다. 연기가 충진된 경우에 대한 단순 데이터 평가에서는 전체이동경로와 복잡이동경로의 상대속도 확률분포가 매우 유사하였지만, 전체이동경 로의 상대속도에 대한 복잡이동경로의 상대속도비율의 개인간 변동폭은 매우 컸다. 한편, 상당속도는 가시거리의 로그함수로 표현할 수 있었다. 또한 실습생의 긴장감이 증가하면서 모든 경로에서 상대속도가 빨라졌다.

Industrial disasters cause lots of damages from individuals to companies and country. Especially, damages caused by constructional disasters take very large portion in the whole industry and are accompanied by huge personal·physical damages. For the prevention of disasters, roles of safety manager are very important and especially, effects of disaster prevention can be changed by occupational ability of construction safety manager. To improve job abilities of safety manager, job education is very important. This research suggested a model for job education management of construction safety manager and proposed improvements as a study on improvement of curriculum for vitalization of job education of construction safety manager so as to improve occupational ability of safety manager. To achieve them, this research examined standard and operation status of current job education of safety manager and the problems and suggested a model materializing job educational contents as a measure to vitalize job education system of safety manager.

우리 조선업은 기술적인 분야에서 세계를 선도하는 역할을 수행하고 있으나 조선업에서는 매년 2,000여명의 재해자가 발생하 고 있으며, 이중 약 40명은 사망하고 있는 등 근로자의 안전측면에서도 과연 우리 조선업이 세계적인 수준인지는 의문이 들 수밖에 없다. 따라서 이 연구는 국내 조선업에서 2006년~2015년 동안 발생한 중대재해의 통계자료를 고찰하여 조선업 중대재해의 발생현황 및 원인을 분석하고, 조선업 근로자를 대상으로 설문조사를 실시하여 산업현장에서의 안전교육 형태를 분석하였으며, 이를 바탕으로 조선업 안전교 육의 문제점을 도출하여 개선방안을 마련하였다. 첫째, 조선소별로 수행하는 안전교육의 종류 및 수준이 상이하거나 교육품질이 미흡한 문제점을 해결하고 체계적으로 교육과정을 운영하기 위해서 조선업 안전훈련 표준체계의 마련이 필요하다. 둘째, 조선업 안전훈련 표준 체계를 바탕으로 조선업에 특화된 안전교육과정을 지속적으로 개발하고 표준화하여 조선업 중대재해를 감소시키고 근로자의 안전의식을 향상시킬 필요가 있다. 셋째, 조선업에서의 중대재해를 예방하여 근로자의 안전을 확보하기 위해서는 사업주와 근로자 모두가 적극적으 로 안전교육을 수행하고 참여하여 사업장의 안전문화를 형성할 필요가 있다.

우리나라는 매년 250여건의 크고 작은 해양오염사고가 빈번하게 발생하는 지역으로, 허베이스피리트호와 마리타임메이지 호 등과 같은 대규모 해양오염사고 발생 시 해양오염으로 인한 피해를 저감하기 위해서 해양오염방제요원의 전문성을 강화하는 것은 필수적이라고 할 수 있다. 이러한 관점에서 국제해사기구(IMO)는 최근 유류오염사고 대응 전문성을 강화하기 위한 OPRC 훈련모델 과정을 개정할 계획이다. 이와 같은 관점으로 우리나라 해양경비안전교육원의 해양오염방제레벨 과정과 국제해사기구(IMO) 그리고 IMO 교육훈련 모델에 따라 실제 교육훈련을 실시하는 OSRL의 교육과정을 비교하여 해양오염방제 레벨과정의 개선방안을 제시하였 다. 분야별로 교육커리큘럼, 실습 및 토의방법, 교육교재 및 IMO 모델 훈련과정 개정에 따라 훈련과정 개발하는 교육기관 인증에 관한 사항이 제안되었다.

Preventive measures against industrial accidents should take into account the safeguards of unsafe states, education, and managerial measures to control the underlying sources of unsafe and unsafe behavior. Technical and managerial problems are also attributable to the educational cause. In particular, in the in-house safety education system, many construction sites form formal safety education.Inherent safety education is the best safeguard against disaster prevention. In the future, the safety education coordinator and the safety education coordinator of the management and supervision of the safety supervisor and hazardous hazard workers will need to improve the active legal system that can be pursued by all trained persons.

The damage caused by dry weather accounts for a great deal of importance throughout the industry. construction safety manager is responsible for the most practical and important task of preventing disasters. Job training is critical to improve the ability of the safety manager. Therefore, an analysis of the operational system and the educational contents of the institution is required. The purpose of this study is to apply a specific training model for occupational training to activate the construction safety task system and improve the job competency of the safety manager. To create a specific educational model, the criteria and units of the construction safety management area presented by the NCS(National Competency Standards) were applied. Based on the task experience, the task experience was divided into four levels of managers, intermediate managers, advanced managers, senior managers, and the class of managers according to the level of duty assigned by each level of staff, organized by each level of class, and determined the method of teaching and assessing teaching methods. In the improvement of job training, the quality of education should be improved by dividing the educational content according to the level of task competency. In addition, it can be expected to increase the effectiveness of training fees and improve the quality of education by enhancing the educational quality of education fees and improving the quality of education by implementing the training sessions to implement the training sessions of the entrusted services to practice the education of the entrusted services. Applying a specific task training model along with these institutional improvements is expected to facilitate the activation of job training, enabling the ability of the safety manager to become a crucial factor in preventing the overall development of the project.

As the demand for automation (or autonmation) or clean workplace has grown, the interest in the knowledge and skill regarding safety is rising in manager duty. Moreover, the importance of severity rate of injury has increased due to the enlargement of industry scale, even safety management area has developed. Thus, it is important that production managers, the core of the line process, realize the safety in their production line, even if a safety manager acts as a staff. However, in the duty oriented National Competency Standard (NCS), the education about the safety duty of production management part is insufficient. According to NCS, it is calculated production managers receive only 6.7% of whole safety education regarding the duty related the safety management for production manager in mechanical industry. However, the ability in safety is more demanded from production managers as the concept of “production and safety” turns into the concept of “production with safety”. And then in this paper, we will compare and analyze the safety management duty in Korean NCS and the safety management duty in State Leaders Connecting Learning to Work in US manufacturing industry, in terms of the duty of the production manage in mechanical industry (05). And, we will develop the safety duty education system for production manager, by classifying the safety education in domestic mechanical industry into knowledge education, skill education, and attitude education with using AHP(Analytic Hierarchy Process).

Full embroidery industrial accidents in recent years has shown a declining trend. But disaster embroidery of domestic construction industry were more than 20,000 deaths per year is about 500 people. The government has introduced a construction site often changing the recruitment of new construction based on health and safety as an alternative to road safety education training yisuje of construction workers, daily work periods short. Certificate of Basic OSH Training in Constructions had also been evaluated as successful by reducing the accident rate problem. It is conducted in private educational institutions has occurred on the friction between workers and employers and training costs are difficult to approach workers in the education standards for such facilities due to the superintendent. Educational institutions are institutions that have been caused by excessive competition lowered levels of education. There is also a lack of evaluation that the training is limited to the basic safety knowledge. These details are brought formal safety education purposes only and is introducing the results of other self jyeotgi difficult to reap the proceeds to good effect. In this study, we propose a plan for improving operational problems and enemy status based on research data presented after the Certificate of Basic OSH Training in Construction.