Dy3+ and Eu3+-codoped SrWO4 phosphor thin films were deposited on sapphire substrates by radio frequency magnetron sputtering by changing the growth and thermal annealing temperatures. The results show that the structural and optical properties of the phosphor thin films depended on the growth and thermal annealing temperatures. All the phosphor thin films, irrespective of the growth or the thermal annealing temperatures, exhibited tetragonal structures with a dominant (112) diffraction peak. The thin films deposited at a growth temperature of 100 oC and a thermal annealing temperature of 650 oC showed average transmittances of 87.5% and 88.4% in the wavelength range of 500-1100 nm and band gap energy values of 4.00 and 4.20 eV, respectively. The excitation spectra of the phosphor thin films showed a broad charge transfer band that peaked at 234 nm, which is in the range of 200-270 nm. The emission spectra under ultraviolet excitation at 234 nm showed an intense emission peak at 572 nm and several weaker bands at 479, 612, 660, and 758 nm. These results suggest that the SrWO4: Dy3+, Eu3+ thin films can be used as white light emitting materials suitable for applications in display and solid-state lighting.

An optimum route to synthesize Ti-Mo system powders is investigated by analyzing the effect of the heat treatment atmosphere on the formation of the reaction phase by dehydrogenation and hydrogen reduction of ball-milled TiH2-MoO3 powder mixtures. Homogeneous powder mixtures with refined particles are prepared by ball milling for 24 h. XRD analysis of the heat-treated powder in a hydrogen atmosphere shows TiH2 and MoO3 peaks in the initial powders as well as the peaks corresponding to the reaction phase species, such as TiH0.7, TiO, MoO2, Mo. In contrast, powder mixtures heated in an argon atmosphere are composed of Ti, TiO, Mo and MoO3 phases. The formation of reaction phases dependent on the atmosphere is explained by the partial pressure of H2 and the reaction temperature, based on thermodynamic considerations for the dehydrogenation reaction of TiH2 and the reduction behavior of MoO3.

In this study, solid solution heat treatment of consolidated nickel-based superalloy powders is carried out by hot isotactic pressing. The effects of the cooling rate of salt quenching, and air cooling on the microstructures and the mechanical properties of the specimens are analyzed . The specimen that is air cooled shows the formation of serrated grain boundaries due to their obstruction by the carbide particles. Moreover, the specimen that is salt quenched shows higher strength than the one that is air cooled due to the presence of fine and close-packed tertiary gamma prime phase. The tensile elongation at high temperatures improves due to the presence of grain boundary serrations in the specimen that is air cooled. On the contrary, the specimen that is salt quenched and consists of unserrated grain boundaries shows better creep properties than the air cooled specimen with the serrated grain boundaries, due to the negative creep phenomenon.

To observe the bonding structure and electrical characteristics of a GZO oxide semiconductor, GZO was deposited on ITO glasses and annealed at various temperatures. GZO was found to change from crystal to amorphous with increasing of the annealing temperatures; GZO annealed at 200 oC came to have an amorphous structure that depended on the decrement of the oxygen vacancies; increase the mobility due to the induction of diffusion currents occurred because of an increment of the depletion layer. The increasing of the annealing temperature caused a reduction of the carrier concentration and an increase of the bonding energy and the depletion layer; therefore, the large potential barrier increased the diffusion current dna the Hall mobility. However, annealing temperatures over 200 oC promoted crystallinity by the defects without oxygen vacancies, and then degraded the depletion layer, which became an Ohmic contact without a potential barrier. So the current increased because of the absence of a potential barrier.

We demonstrate the electrochromic properties of TiO2 nanotubes prepared by an anodization process and investigate the effects of heat treatment and viologen incorporation on them. The morphology and crystal structure of anodized TiO2 nanotubes are investigated by scanning electron microscopy and X-ray diffraction. As-formed TiO2 nanotubes have straight tubular layers with an amorphous structure. As the annealing temperature increases, the anodized TiO2 nanotubes are converted to the anatase and rutile phases with some cracks on the tube surface and irregular morphology. Electrochemical results reveal that amorphous TiO2 nanotubes annealed at 150°C have the largest oxidation/ reduction current, which leads to the best electrochromic performance during the coloring/bleaching process. Viologenanchored TiO2 nanotubes show superior electrochromic properties compared to pristine TiO2 nanotubes, which indicates that the incorporation of a viologen can be an effective way to enhance the electrochromic properties of TiO2 nanotubes.

농축 블루베리 주스의 가공과정에서 열처리는 40 Brix로 농축하는 공정으로 40℃에서 3시간 감압농축을 하였으며 살균공정으로 90℃에서 30분간 하였다. pH 조절제로써 원료인 블루베리 대비 1%(w/w)의 시트르산(citric acid, CA) 또 는 산성메타인산나트륨(acidic sodium metaphosphate, ASM)을 사용하였다. 대조구, 1% CA 및 1% CA + 1% ASM 농축 블루베리 주스의 pH는 각각 2.67, 2.60 및 1.61이었으며 색가(color value)는 33.03. 22.08 및 54.67이었고 적색도 a값은 2.88, 4.25 및 4.43이었다. 총 폴리페놀함량은 각각 312.71, 296.15 및 353.82 mg/g이었으며 총 플라보노이드함량은 389.00, 306.43 및 377.42 mg/mL이었고 총 안토시아닌함량은 46.02, 30.86 및 65.75 mg/100g이었다. 항산화활성으로써 DPPH 라디칼 소거활성은 각각 87.98, 97.63 및 113.01% 이었으며 SOD-like 활성능은 14.52, 14.19 및 23.95% 수준이었 다. Elastase 저해활성은 각각 28.29, 26.34 및 26.06%이었다. 모든 분석 치에 대하여 대조구와 1% CA + 1% ASM 블루 베리 퓨레 간에 5%내에서 유의성차이를 보였다.

티타늄은 표면에 형성되는 보호성 부동태 피막 때문에 일반부식과 해수에서 내식성이 강하지만 염산, 황산, 인산 등의 산에서는 보호성 산화물 피막이 파괴된다고 알려져 있다. 본 연구에서는 Ti에 Al 및 V등을 첨가한 α+β계에 대하여 1066℃와 966℃에서 5시간 용체화 열처리를 실시하고, 이 시편을 550℃, 600℃, 및 650℃에서 각각 1시간, 4시간, 8시간 및 16시간 시효열처리한 후 마이크로비커스 경도를 측정하고, 이 시편을 1N H₂SO₄ 용액에서 전기화학적 분극법으로 부식을 계측하였으며, 분극을 마친 시편의 표면을 현미경 조직사진으로 부식상태를 검토하였다. 시험 결과 용체화열처리한 시편이 모재와 시효열처리한 시편보다 높은 내식성을 나타내며. 용체화 온도가 높고 시간이 길어질수록 내식성은 증가하였다.

In this study, we investigated the effect of annealing conditions on the ferromagnetic resonance(FMR) of yttrium iron garnet (Y3Fe5O12, YIG) thin film prepared on gadolinium gallium garnet (Gd3Ga5O12, GGG) substrate. The YIG thin films were grown by rf magnetron sputtering at room temperature and were annealed at various temperatures from 700 to 1000 ˚C. FMR characteristics of the YIG thin films were investigated with a coplanar waveguide FMR measurement system in a frequency range from 5 to 20 GHz. X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS) were used to characterize the phase formation, crystal structure and composition of the YIG thin films. Field dependent magnetization curves at room temperature were obtained by using a vibrating sample magnetometer(VSM). The FMR measurements revealed that the resonance magnetic field was highly dependent on the annealing condition: the lowest FMR linewidth can be observed for the 800 ˚C annealed sample, which agrees with the VSM results. We also found that the Fe and O composition changes during the annealing process play important roles in the observed magnetic properties.

The organic binder-free paste for dye-sensitized solar cell (DSSC) has been investigated using peroxo titanium complex. The crystal structure of TiO2 nanoparticles, morphology of TiO2 film and electrical properties are analyzed by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Electrochemical Impedance Spectra (EIS), and solar simulator. The synthesized TiO2 nanopowders by the peroxo titanium complex at 150, 300, 400˚C, and 450˚C have anatase phase and average crystal sizes are calculated to be 4.2, 13.7, 16.9, and 20.9 nm, respectively. The DSSC prepared by the peroxo titanium complex binder have higher Voc and lower Jsc values than that of the organic binder. It can be attributed to improvement of sintering properties of TCO/TiO2 and TiO2/TiO2 interface and to formation of agglomerate by the nanoparticles. As a result, we have investigated the organic binder-free paste and 3.178% conversion efficiency of the DSSC at 450˚C.

본 연구에서는 현재 전량 폐기되는 정수기용 폐 카본블록 필터를 재활용하고자 폐 필터의 특성을 파악한 후 열 처리를 진행하였다. 성능 평가를 위해 실제 정수기에서 사용 후 폐기되는 카본블록 필터 (도레이 케미칼에서 제조)를 회수하여 활성탄의 흡착능을 측정하였다. 대조군으로써 새 필터도 같은 조건으로 진행하였다. 재활용을 위한 열처리의 온도는 400, 550, 및 700℃로 진행하였으며 최적 조건을 찾기 위해 새 필터에 먼저 열처리를 진행하였다. 또한 TGA, DSC, SEM 및 BET를 이용하여 폐 필터의 표면 특성을 분석하였다. 이러한 결과를 바탕으로, 폐 필터 표면에 막 오염(fouling)과 정도를 확인하였으며, 폐 카본블록 필터의 재활용 및 복원기술 연구를 통한 순환 활용 기술을 확보하고자 한다.

PEBAX[poly(ether-block-amide)는 열가소성인 탄소체로 부드럽고 유연한 폴리에테르와 단단한 폴리아마이드의 블록으로 이루어졌다. 두 compounds는 기체 분리막에 있어 필수적인 특성을 가지고 있다. 폴리에테르는 높은 투과도를 제공하고 폴리아마이드는 기계적 강도가 좋고 기체 선택성도 우수하다. GO(Graphene oxide)는 흑연으로부터 제조하여 재료의 습득이 용이할 뿐 아니라 기체투과에 선택적 배리어로서 작용한다. 본 연구에서는 GO에 열을 가한 뒤, 함량을 달리한 PEBAX-GO 복합막을 제조하고, 제조된 막의 물리화학적 특성, 기체투과도, 선택성에 대해 연구하였다.

The mechanical properties and microstructures of Aluminum 6056 alloys were investigated for their use in the fabrication of a piton block. The EN-AW6056 alloys exhibited a tensile strength of 375 MPa for a solution treatment temperature of 550 oC for 2 h followed by an aging treatment at 190 oC for 4 h. The microstructures of the heat treated specimen showed that the Mg2Si phase with a size of 3~5 um was dispersed throughout the aluminum matrix when the heat treatment was done. Moreover, in order to identify the forgeability of the specimen, upsetting tests were done. For up to 80 % of the upsetting ratio, the specimen maintained its original shape, and at above 80 % of the upsetting ratio, the specimen underwent crack development. The specimen was successfully forged without any defects with the examined material conditions. The material conditions together with the forging conditions are discussed in terms of the microstructures and mechanical properties.

이산화염소(ClO2) 훈증제는 살충효과를 나타낸다. 그러나 일부 곤충은 이산화염소에 대해 회피행동을 보여, 이 훈증제에 대한 방제효율을 크게 떨어뜨리고 있다. 본 연구는 이를 해결하기 위해 이산화염소 처리에 열처리를 추가하여 곤충의 이산화염소에 대한 회피행동을 줄여 살충효과를 극대화하는 전략을 세웠다. 이산화염소 훈증 처리는 거짓쌀도둑거저리(Tribolium castaneum)에 대해 살충효과를 주었으며, 시험 곤충이 노출된 조건에서 12 시간 처리할 때 유충에 대해서 383.67 ppm (153.63 - 955.78 ppm: 95% 신뢰구간), 성충에 대해서 397.75 ppm (354.46 - 446.13 ppm: 95% 신뢰구간)의 반수치사농도를 나타냈다. 그러나 먹이인 밀가루를 충분히 제공한 상태에서 이산화염소를 처리하면, 처리 약제에 반응하여 시험 곤충이 먹이 속으로 들어가는 회피행동을 보이면서 방제효과는 크게 낮아졌다. Y 튜브를 이용한 이 곤충의 먹이 선호성 행동을 분석한 결과 거짓쌀도둑거저리 성충은 이산화염소가 처리된 먹이를 회피하는 행동을 보였다. 그러나 촉각을 제거한 경우 이러한 회피행동은 둔화되었다. 거짓쌀도둑거저리에 6 시간 동안 46℃ 열처리를 하면 살충효과는 10% 이하로 낮지만, 처리된 성충들이 먹이 밖으로 나와 있는 것을 관찰하였다. 반면 400 ppm의 이산화염소를 단독으로 6 시간 처리한 결과 회피행동에 따라 전혀 살충효과를 보이지 않았다. 그러나 46℃ 열처리와 400 ppm의 이산화염소를 병행하여 6 시간 처리한 결과 살충효과는 95%로 크게 증가하였다. 따라서 열처리는 거짓쌀도둑거저리의 이산화염소에 대한 회피행동을 억제하여 살충효과를 증가시켰다.