Risk Assessment, a basis of health and safety management system, is an calamity prevention activity which regularly measure the level of a risk to passively improve potential hazard. A problem, the assessment not being improved to be applied to the construction work site where requires diversity and complexity, causes the assessment to be inefficient to bring quality results. A study on the investigates and compares the surveyed degree of recognitions of workers who works in companies executing the risk assessment By the investigation and comparison, it is expected to bring the better solution for early and efficient application for those companies which are not taking the risk assessment.

본 연구에서는, 반도체, LCD 공정에서 금속막을 증착하기 위하여 PECVD장비에 화재, 폭발 위험성과 독성을 가진 Silane가스를 사용하게 되는 장비인 gas cabinet, pipeline, VMB(Valve manifold box), MFC(mass flow controller)장비 등, 전반적인 시스템에 대하여 영국 HES의 ALARP개념을 도입하여 위험성 평가를 실시하여 문제점을 도출하고 대책을 강구 하는데 목적이 있고, 여러 가지 문제점중

우리나라 연안 해역은 빈번한 선박조우로 인하여 해양사고 발생 잠재 위험이 높은 해역으로 분류되고 있으나 해상교통의 정량적인 평가의 미흡으로 맞춤형 안전대책이 제대로 수립되고 있지 않는 것이 현실이다. 본 연구에서는 울산항을 평가 대상으로 한 해상교통 안전성 평가를 실시하고, 그 결과를 실제 사고 통계 자료와 비교 하고자 한다.

In the steel industry, steel is manufactured and processed to produce a variety of steel products. The industry provides fundamental materials to the whole range of industries including car, ship, electric appliance and construction industries, so that it is very important as an infrastructure industry. The steel manufacture process involves aerial work, many danger factors caused by the treatment with hazardous gases including BFG and COG and by high pressure gases including H2, O2, N2 and LPG. It requires the management over the large area because many workers work in a plant. The potential dangers in the steel plant were identified and the effect of the danger assessment was verified through the analysis of the danger assessment for the steel plant. The allowed degree of danger was lowered after the improvement through the danger assessment in the plant where the case studies were conducted, which indicates that the danger assessment is highly effective.

Recently, in circumstantial situation it is recommended positively to utilize of EIFS(Exterior Insulating and Finishing System) as energy policy for economizing energy. But internal EPS insulators of EIFS are exterior panel of high fire risk, because of constituting of flammable materials to be fragile in fire. In this study, fire risk is assessed by experiment Con Calorimeter test and SBI(Single Burning Item) test. As the result of experiment, Con Calorimeter tests do not reach to capability standard of internal incombustible grade, and are assessed as low grade in SBI incombustible grade. Because EIPS is exterior material in buildings with high fire risk in spite of good efficiency, it is required rapidly to take measures to meet situation through various studies(for instance, adjusting law regulation, etc.) in the future.

The unsafe act and unsafe condition is due to human error that experience 80% of safety one of the most important issues to reduce industrial accidents as a whole, is how to reduce the accident rate by the human error Therefore, this paper describes the d

Steel and iron works have place many hazard or risk factor as a high temperature material, a high place, and so on. Accordingly, steel and iron works need system for risk assessment. In this paper, we development of risk assessment system for steel and iron works. In case study applied at the steel enterprise. The resultant, we can discovery that an human factor is an important question form risk assessment.

In the steel industry, steel is manufactured and processed to produce a variety of steel products. The industry provides fundamental materials to the whole range of industries including car, ship, electric appliance and construction industries, so that it is very important as an infrastructure industry. The steel manufacture process involves aerial work, many danger factors caused by the treatment with hazardous gases including BFG and COG and by high pressure gases including H2, O2, N2 and LPG. It requires the management over the large area because many workers work in a plant. The potential dangers in the steel plant were identified and the effect of the danger assessment was verified through the analysis of the danger assessment for the steel plant. The allowed degree of danger was lowered after the improvement through the danger assessment in the plant where the case studies were conducted, which indicates that the danger assessment is highly effective.

Government and company are unfolding greenhouse gas reduction activity to prevent the effects of global warming. Also, verification business through greenhouse gas inventory construction is spreaded variously. Greenhouse gas verification proceeds by document examination, risk analysis, field survey. Document investigates emission information, calculation standard, emission report, data management system. And through risk assessment result, establish field verification plan. Through study on risk assessment of greenhouse gas inventory verification, wish to reduce risk of verification.

In this study, with the objects of 173 institutions of university and research institutions, investigation was carried out through visit investigation ar d questionnaire investigation. Frequency and severity of occurrences was acquired mainly through universities and research institutions which have reported occurrences of accidents to the Ministry of Education, Science, and Technology. Quantitative danger evaluation was conducted through frequency and strength of occurrences. Case study was carried out by selecting bio science laboratory of university and as the result of this study, degree of danger among the inspection objects of bio science laboratories, laboratory work place was evaluated as the most dangerous with the scores of 155.00 and as the result of average danger level, compression gas cylinder was evaluated as the most dangerous with the scores of 6.4000.

In this study, with the objects of 173 institutions of university and research institutions, investigation was carried out through visit investigation and questionnaire investigation. Frequency and strength of occurrences was acquired mainly through universities and research institutions which have reported occurrences of accidents to the Ministry of Education, Science, and Technology. Quantitative danger evaluation was conducted through frequency and strength of occurrences. Case study was carried out by selecting bio science laboratory of university and as the result of this study, degree of danger among the inspection objects of bio science laboratories, laboratory work place was evaluated as the most dangerous with the scores of 155.00 and as the result of average danger level, compression gas cylinder was evaluated as the most dangerous with the scores of 6.4000.

This research modified the checklist used in the universities in USA, England and Korea considering the current situation of Korea, and conducted case studies upon each section of appointed chemical laboratories based on 4M criteria, which stands for Machine, Media, Man and Management. The purpose of the studies is to assess how dangerous the laboratories are and to contribute to prevention of accidentsin the laboratories as well as reducing loss of lives and property. The result of this research found out the harmful and hazardous factors based on the 4M-type checklist and predicted the dangerousness as it multiplies possible frequency by intensity. Protective equipment, safety facilities in laboratories, emergency exit and compressed gas cylinder are found to be more dangerous, so the result shows that it is desirable to improve ventilation, safety facilities and circumstances of the laboratory through the investment.

복잡한 구조물의 유한요소해석 응답값으로부터 계산된 요소신뢰성 지수와 파괴확률은 음함수의 미분 및 극히 작은 파괴확률의 계산상 1계2차 모멘트법 (FOSM)과 몬테카를로 시뮬레이션(Monte-Carlo Simulation)의 적용이 어려우므로, 선택된 확률변수만의 함수인 한계상태방정식을 음함수로 구성하는 응답면기법을 적용하여, 기본설계단계의 아치교량의 설계값으로 구성된 확률변수를 고려하여 교량시스템의 완성단계에 대한 위험성을 해석하였다. 체계신뢰성 해석에서는 모든 붕괴모드의 발생경로와 단면에 대한 해석에 많은 시간이 소요되어 유한요소 구조해석 결과와 기존의 아치교 사고사례 등을 통해서 밝혀진 중요한 위험경로 및 위험단면의 파괴를 일으키는 사건에 대하여만 고려하였다. 교량시스템의 체계신뢰성을 평가하여 상관관계의 변동에 따른 시스템붕괴에 대한 발생확률의 상하한계를 결정하였다. 시스템의 요소간 저항연결구조는 요소파괴의 순서와 전체강성의 감소정도에 따라서 결정하였다. 체계신뢰성에서 검토되지 않는 다른 요소간의 상관관계를 검토하기 위해서 가정된 붕괴순서와 다른 거동을 보일 경우에 대해서는 통계적으로 독립된 요소들의 파괴와 그 모든 붕괴모드 조합경우에 대해서 검토하였다. 붕괴모드조합의 검토 결과 거더와의 파괴조합과 아치리브와의 파괴조합에서 체계신뢰성보다 위험한 상한계 시스템 파괴확률과 안전한 하한계 파괴확률이 발견되었다.

본 연구는 LES를 이용해 건물군 주위의 풍환경을 수치적으로 해석하였다. 본 연구의 동기는 강풍 피해에 대한 위험도 평가 기술을 개발하려는 노력에 기인한다. Lagrangian dynamic subgrid-scale model이 난류 모델링으로서 사용되었으며 log-law에 기반을 둔 벽모델이 바닥면과 건물 표면에 적용되었다. 건물의 형상은 가상경계법을 이용해 구현되었으며 직교좌표계를 이용하였다. 위험도 평가에서 중요한 인자는 평균 물리량 뿐만 아니라 그 RMS 값이다. 몇몇 선택된 건물의 표면과 그 주위의 압력 및 속도, 난류 강도 등을 도시화하였으며, 특히 사람 높이에서의 그러한 물리량들의 평균과 RMS값을 도시함으로써 인간에 대한 직접적인 위험도를 예측하였다.

항공, , 원자력과 같이 안전성이 크게 요구되는 시스템에서는 사업운영자들에 대한 안전자격과 안전인증 제도에 의한 정기적 안전 확인이 매우 중요하나 , 일상적인 운영사고의 관리 뿐 아니라 저빈도 대형사고에 대한 기술적 연구과 관리가 지속적으로 이루어져야 한다. 본 논문은 위험성평가 결과를 기반으로 하여 안전경영 시스템을 운영하는 유럽국가들의 사례를 살펴보고 적용된 위험성평가 기술과 그 결과를 어떻게 경영관리에 활용하는지를 연구하였다. , 그리고 운영상 수영할 수 있는 적절한 위험수준에 대하여 사례를 통한 발표를 하려고 한다.

In risk assessment, there are several methods such as Safety Review, Checklist, FMEA(Failure Mode and Effect Analysis), FTA(Fault Tree Analysis), ETA (Event Tree Analysis) etc, however, the level of accident is indentified by the probability of accident and severity resulting from accident which used widely in assessing accidents and disasters. In this paper, the risk assessment method to decide the level of risk will be introduced by using severity, frequency and detection according to accident theory.