바이오물질을 포함하는 나노발전기는 무공해 에너지원이며 생분해성 전자폐기물이라는 점에서 친환경적인 전자소자이다. 특히 바이오 물질이 바이오폐기물로부터 추출될 수 있다면 바이오폐기물의 양도 줄어들 것이다. 본 연구에서는 포유동물의 피부에 존재하는 동물성 콜라겐을 이용하여 마찰전기 나노발전 기를 제작하였고 그 특성평가를 진행하였다. 마찰전기 나노발전기의 전기적 양극층은 회전 도포방법을 이 용하여 콜라겐 막을 형성하여 구성하였으며, 주사전자현미경으로 막이 다공성임을 확인하였다. 제작한 마 찰전기 나노발전기는 주기적인 기계적 운동에 의해 3 Hz에서 7 V부터 5 Hz에서 15 V의 개방전압과 5 Hz에서 3.8 μA의 단락전류를 보였다. 결론적으로, 콜라겐 함유 마찰전기 나노발전기는 센서와 같은 저전 력 구동 장치의 전원이 될 수 있으며 전자 폐기물 감소에도 유용할 것으로 기대된다.

This study chiefly aims to clarify efficient methods considering behavioral pattern of refugees in multi-use facilities which can be applied to architectural planning. Accordance with COVID-19 situation, it is mandatory to check the temperature of visitors as a measure for the prevention of COVID-19 in multiuser facilities. When disaster occurs, for people in multi-use facilities such as medical facilities, museum, concert hall etc, it is difficult to find out short and right route to outside since the spatial characteristics are not familiar to visitors. If we design floor plans and circulation system considering behavioral pattern of refugees we can prevent the spread of disasters when they happen.

본 연구는 제주도 연안의 해역별 해조류 분포특성을 비교하기 위하여 2018년 5월부터 12월까지 제주도 본섬 4개 정점과 유인도서 2개 정점의 마을어장에서 수행되었다. 해조류는 총 101종으로 녹조류 13종(12.9%), 갈조류 24종 (23.8%) 그리고 홍조류 64종(63.4%)이 출현하였다. 계절별로는 5월에 가장 많은 해조류가 출현하고, 10월에 가장 적게 출현하는 전형적인 온대해역의 특징을 나타냈다. 수심별 해조류 출현 종수는 5m와 8m에서는 66종과 65종으로 유사하였으며, 12m에서는 74종으로 최대였다. 해역별로는 도서해역인 우도에서 66종으로 가장 많은 해조류가 출현하 였고, 본섬의 동부 표선에서 27종으로 가장 적게 출현하였다. 출현종 가운데 중요도가 높은 해조류는 감태(Ecklonia cava)와 둘레혹산호말(Corallina crassissima)로 각각 21.1%와 20.3%를 나타냈으며, 방황혹산호말(Corallina aberrans) 9.2%, 에페드라게발(Amphiroa ephedraea) 6.2% 그리고 큰열매모자반(Sargassum macrocarpum) 4.4%의 중요도를 나타냈다. 해조류 중 산호말류는 평균 11.2종이 출현하였고, 각 해역의 산호말류 중요도는 평균 32.6%로 우도에서 14.7%로 가장 낮았고, 표선에서 가장 높은 41.0%를 차지하였다. 해조류 군락의 생태학적 평가지수(EEI)는 2.1∼10.0으로 표선의 5월과 6월 12m에서 가장 낮았고, 그 밖의 다른 해역에서는 평균 7.3이상으로 좋은 상태를 나타냈다. 본 조사에서 설정한 생태등급기준 Ⅰ등급은 우도와 추자도의 수심 12m이었으며, Ⅱ등급은 사계와 추자도의 수심 5 m와 8 m가 해당되었다. Ⅲ등급은 표선과 귀덕2의 수심 5m와 12m, 평대의 수심 5m와 8m가 해당되었으며, Ⅳ등급은 귀덕2의 수심 8m가 해당되었다.

The CDI (Capacitive deionization) is one of the desalination technologies that use a carbon material electrode with large surface area and excellent electrical conductivity. Recently, research on a MCDI (Membrane Capacitive deionization) process, which is a combination of an ion-exchange membrane, has been actively conducted. In this study, we tried to find out the water quality of treated water and the concentration characteristics of concentrated water through TDS analysis by MCDI conventional and circulation process. In producing treated water, there was no significant difference in adsorption efficiency between MCDI conventional and circulation process. It was confirmed that both processes adsobed more than 96 %. However, the MCDI conventional process showed a low yield of 50 %, whereas the MCDI circulation process showed a high yield of 97.6 %. It's because, the wasted water was reused at desorption. In the case of the TDS concentration using MCDI circulation process, as the cycle progressed, the TDS concentration was concentrated up to 1,300 mg/L, but the rate gradually decreased. It is believed that this is because the volume of the concentrated water tank is limited, and the amount of soluble ions gradually decreases. As a result of analyzing the wasted water at MCDI circulation process through Ion Chromatography, it was confirmed that the concentration of all ions were concentrated. However, there was no significant difference in the types and proportions of analyzed ions. It is judged that the types and concentration of ions do not have a significant effect on adsorption and desorption in the MCDI circulation process.

소비자에게 판매하기 위해 비육을 하여 길러지는 돼지가 아닌 새끼를 낳기 위해 장기간 사육되는 돼지를 모돈이라 한다. 모돈은 규격돈보다 육색이 붉은 것이 특징이며 단단한 조직감으로 인해 잘 소비되지 않는다. 본 연구는 모돈을 가공 원료육으로 활용하기 위해 품질 및 가공특성을 평가하였다. 먼저, 냉동-해동된 모돈과 규격돈의 뒷다리를 이용하여 품질특성을 비교하였으며 가공특성은 유화형소시지를 제조하여 수행하였다. 원료육의 품질특성은 일반성분, pH, 육색, 콜라겐 함량, 조직감, 보수력을 측정하였고 가공특성은 유화형소시지를 제조하여 조직감 및 유화 안정성을 측정하였다. 모돈의 육색은 규격돈보다 붉고(p<0.05), 조직감은 단단하였다(p<0.05). 그러나 pH, 보수력, 콜라겐 함량, 유화 안정성, 소시지의 조직감은 유의적인 차이가 없었다. 결론적으로 모돈의 단단한 조직감은 분쇄를 통해 해결하였으며 대부분의 품질 및 가공특성은 모돈과 규격돈에서 동일하였다. 따라서 모돈을 가공 원료육으로 활용하면 규격돈과 가공특성의 차이가 없음을 확인하였으며, 규격돈에 비해 높은 수율은 제품 원가를 절감할 수 있을 것으로 판단된다.

Liquid-state fermentation (LSF) and solid-state fermentation (SSF) were carried out to produce enzymes and β-glucan. The modified synthetic medium composition in liquid-state fermentation (LSF) was determined to be 5% (w/v) whole oat flour, 2% (w/v) tryptone, and 2% (w/v) rice bran. The different humidity conditions of oat by solid-state fermentation were evaluated in terms of maximum production of fungal biomass, amylase, protease, and β-glucan, which were 0.23 mg/g, 7,157.38 U/g, 413.67 U/g, and 8.26% (w/w), respectively, at 60% of humidity condition. Moreover, α-glucosidase inhibition activities of fermented oat with 60% humidity at 48 h were shown to be high 49.08% (w/w). Therefore, liquid- and solid-state fermentation processes were found to enhance the overall fermentation yields of oat to produce enzymes and β-glucan.

Micro-climate measurements and computational fluid analysis were conducted to use it as basic data for the preservation and management of the old house of Kim Myung-kwan, a traditional building that is National Folk Cultural Property No. 26. As a result of the actual measurement, the temperature and humidity are relatively evenly distributed indoors unlike outdoors, but the temperature and humidity vary depending on the time change and the installation location in the outdoors. It was found that the temperature increases after dawn and the temperature varies depending on the installation position around 14:00–15:00, when the temperature becomes the highest. In particular, the temperature was high at the outdoor measurement point adjacent to the building and the fence. As a result of the computational fluid analysis, the temperature was high in the buildings and fences in the old house or in the area adjacent to the building, and it was about 1℃ higher than the surrounding area. In this area, it is judged that the thickening of wood will occur more severely than in other locations, and special preservation management is required.

The purpose of this study was to develop a functional beverage by using Caragana sinica extract and Tremella fuciformis Berk, which have high physiological effects such as anti-diabetic, antioxidant, anticancer, anti-lipidemic and anti-inflammatory. To this end, we used various mixing ratios of Caragana sinica extract, Tremella fuciformis Berk, and isomalto oligosaccharide, and measured the physicochemical properties of those beverages. The analyses showed the following: moisture content of those beverages using Caragana sinica extract and Tremella fuciformis Berk was 50.51~67.64%, pH was 5.19~5.38, and crude fat content was 0.28~0.52%, crude protein content was 1.26~1.80%, ash content was 0.47~0.80 and sugar content was 8.55~26.98°Brix. The lightness (L) of the beverages was 37.70~58.11, the redness (a) was 6.88~16.94, the yellowness (b) was 13.72~23.68, the total polyphenol content was 2.07~3.46 mg/g, and the total flavonoid content was 0.37~0.42 mg/g. Based on the results, it was confirmed that the nutritional components and total polyphenols of functional beverage using Caragana Sinica Extract, Tremella Fuciformis Berk and isomalto oligosaccharide were high at a mixing ratio of 1:1.3:25%. These results will increase the use of Caragana Sinica Extract and Tremella Fuciformis Berk, as functional materials in the future, and provide a framework for the manufacturing of diluted beverages comprising mineral water and carbonated water.

This study measured the suspended fungal concentration in indoor multiple facilities nationwide. The regions were selected as representative cities by region: Seoul, Gyeonggi (Incheon), Gangwon, Gwangju, Daejeon, and Busan. A total of 2028 regional comparisons, including department stores, schools, public toilets, libraries, and banks, subway, sports facilities and comparative analysis were conducted for each multi-use facility industry. Among the nationwide, Among the regions, the average concentration of floating mold in indoor multi-use facilities was the lowest in Busan at 394.67 CFU/m3, followed by Gyeonggi and Incheon 487.90 CFU/m3, Seoul 542.84 CFU/m3, Daejeon 809.30 CFU/m3, Gangwon 1,145.22 CFU/m3, Gwangju was 1,371.10 CFU/m3 in the order. Busan was the lowest, and Gangwon was the highest. The reason that Busan, which has a high average temperature and population density, shows a lower mold concentration than Gangwon, is that floating mold in the indoor air is not affected by the external atmospheric environment, population density, and number of facility users. Although it cannot be said that there is no influence of the atmospheric environment, it was found that the indoor environment has different characteristics from the outdoor environment. The importance of air quality management has been confirmed, and further, it is necessary to subdivide the management standards by region and multi-use facilities, and the management standards need to be converted to maintenance rather than recommendations.

In this paper, the instability of the domed spatial truss structure using wood and the characteristics of the buckling critical load were studied. Hexagonal space truss was adopted as the model to be analyzed, and two boundary conditions were considered. In the first case, the deformation of the inclined member is only considered, and in the second case, the deformation of the horizontal member is also considered. The materials of the model adopted in this paper are steel and timbers, and the considered timbers are spruce, pine, and larch. Here, the inelastic properties of the material are not considered. The instability of the target structure was observed through non-linear incremental analysis, and the buckling critical load was calculated through the singularities and eigenvalues of the tangential stiffness matrix at each incremental step. From the analysis results, in the example of the boundary condition considering only the inclined member, the critical buckling load was lower when using timber than when using steel, and the critical buckling load was determined according to the modulus of elasticity of timber. In the case of boundary conditions considering the effect of the horizontal member, using a mixture of steel and timber case had a lower buckling critical load than the steel case. But, the result showed that it was more effective in structural stability than only timber was used.

Recently, the medical industry’s use of biomaterial has taken an important place. A biomaterial is a semi-permanent material that can be used instead of a specific part of the body when there is a disability. Among them, Nitinol alloy has used in the human body, the material surface quality is very important, and research on processing methods is important to improve the surface quality. Therefore, in this study, a study was conducted to obtain high-quality surface quality using the MR polishing process. As a result, high-quality surface roughness was obtained at a wheel rotation speed of 400rpm(Ra=3.5nm).

The prediction of algal bloom is an important field of study in algal bloom management, and chlorophyll-a concentration(Chl-a) is commonly used to represent the status of algal bloom. In, recent years advanced machine learning algorithms are increasingly used for the prediction of algal bloom. In this study, XGBoost(XGB), an ensemble machine learning algorithm, was used to develop a model to predict Chl-a in a reservoir. The daily observation of water quality data and climate data was used for the training and testing of the model. In the first step of the study, the input variables were clustered into two groups(low and high value groups) based on the observed value of water temperature(TEMP), total organic carbon concentration(TOC), total nitrogen concentration(TN) and total phosphorus concentration(TP). For each of the four water quality items, two XGB models were developed using only the data in each clustered group(Model 1). The results were compared to the prediction of an XGB model developed by using the entire data before clustering(Model 2). The model performance was evaluated using three indices including root mean squared error-observation standard deviation ratio(RSR). The model performance was improved using Model 1 for TEMP, TN, TP as the RSR of each model was 0.503, 0.477 and 0.493, respectively, while the RSR of Model 2 was 0.521. On the other hand, Model 2 shows better performance than Model 1 for TOC, where the RSR was 0.532. Explainable artificial intelligence(XAI) is an ongoing field of research in machine learning study. Shapley value analysis, a novel XAI algorithm, was also used for the quantitative interpretation of the XGB model performance developed in this study.

This study was carried out to examine the physical characteristics of bacterial cellulose (BC) and its optimal culture condition using coffee by-products. Recently, recycling resources and employing eco-friendly materials have been raised as significant issues in the food industry. As the coffee industry develops, interests and efforts for recycling coffee wastes are also growing. This study attempted to confirm the production of BC by utilizing spent coffee grounds filtrate as a medium. In order to confirm the optimal culture conditions for BC production, different culture methods, initial pH, culture temperature, and culture period were examined. The optimal pH and temperature were 6.0 and 30oC, and the optimal culture period was 14 days. The cultivated BC was dried by hot air drying, freezedrying, and mold drying, respectively. Then, the properties of the BC films, such as tensile strength, elongation, water-solubility, thickness, and chromaticity were compared. The drying method affected the shape and structure of the final BC films. The production of BC film is expected to expand opportunities for recycling coffee by-products and contribute to solving environmental problems caused by food waste.