This paper investigates the waveform analysis of voltage and current waveform from CRDI engine. It is on developing on analysis method of waveform CRDI Diesel engine. The experimental methods using Pico oscilloscope are employed to measure current and voltage waveform of solenoid injector from CRDI engine. The one normal and two abnormal solenoid injectors are used. The experiment is carried out during no-load condition. A summary of the important results are as follows. 1) The area of the voltage and current waveform of the abnormal injector becomes larger than the that of normal injector. 2) The area of the current waveform can be obtained more accurate results than that of voltage waveform.

This study analyzed by measuring the voltage waveform of the injector intended for operating CRDI diesel vehicle. The cases of the EGR trouble and a EGR normal is considered. 1) The voltage waveform in the case of the normal and trouble, the difference between the maximum voltage was not large, decrease in the number of voltage gated pulses with the increase in engine speed, sustained current remained for this period. 2) The voltage waveform, comparing the case of the normal case and trouble, the size of the maximum voltage, no large change in gate pulse voltage is to be generated than in the case of a defective irregular longer opening time of the injector factor it was possible to know the bad influence on the fuel efficiency.

The experiment was carried out during no-load condition for analysis of the relativity between MAP, hot film, oxygen, the secondary ignition and injector waveform. The experimental methods using oscilloscope were employed to measure waveform. The relativity between several waveform and the secondary waveform coming from ignition coil were measured in case of three decrepit vehicles. From these results, a summary of the important results are as follows. 1. Through fast acceleration experiments, the response time values of hot film sensor and oxygen sensor was faster than the those of the MAP sensor and oxygen sensor. 2. The values of spark line duration time was largest A, C, B type in the order named. And discharge energy of the secondary ignition waveform was largest A, B, C type 3. The value of effective discharge energy is to be nearly proportional to the spark line duration time. 4. The value of effective discharge energy directly increases as revolutions per minute increase, and the value of spark line duration time decreases as revolutions per minute increase.