The improvement of resistance performance for the 4.99 ton class fishing boats was shown. The 4.99 ton fishing boats are the most commonly used one in the Korean coastal region. The evaluation of resistance performance was estimated by the Computational Fluid Dynamics (CFD) analysis. The CFD simulation was performed by the validation for various types of bow shapes on the hull. The optimized hull form from the simulation was selected and showed the best resistance performance. This hull type was tested on the towing tank in the National Institute of Fisheries Science (NIFS). The effective horsepower (EHP) was estimated by the resistance test on the towing tank with the bare hull condition. The drag force on the three service speed conditions was obtained for the resistance analysis to power prediction. The measured drag forces are compared with the results from the CFD simulation with one another. As results of the model tests, it was confirmed that the shape of the bow is an important factor in the resistance performance. The effective horsepower decreased about 30% in comparison with the conventional hull form. Also, the resistance performance improved the reduction of required horsepower, which especially contributed to the energy-saving for the fisheries industry. In the CFD analysis, the resistance performance improved slightly. In this case, the ratio of the residual resistance (CR) in the total resistance (CT) was high. Therefore, the CFD analysis was not enough to satisfy with reflection for the free surface and wave form in the CFD procedure. Both model test and CFD calculation in this study can be applied to the initial design process for the coastal fishing vessel.

최근 테러에 대한 위험성의 증가로 대중들의 폭발 피해에 대한 인식이 증가하였다. 우리나라에 방폭 설계에 대한 기준이 미흡하며, 현재 적용하고 있는 방폭 설계도 정적해석으로 건물의 안정성 및 경제성을 위해 방폭 설계를 개발해야 하는 상황 이다. 또한 지진 발생 증가로 내진 설계 의무화가 확대된 가운데 방폭 설계를 하지 않고 내진 설계를 적용한 부재의 방폭 성능을 판단을 연구한다. 현재 보편적인 폭발 하중의 해석 방법은 UFC 3-340-02 매뉴얼을 참고하는 것이다. UFC 3-340-02 매뉴얼을 통한 폭발 하중의 특성을 적용하고 KBC 2016의 내진 상세를 적용한 보를 등가 단자유도 시스템으로 변환하여 폭발 저항 성능을 연구하였다. 보통, 중간, 특수 모멘트 골조의 연성 능력에 대한 최대 처짐을 고려하여 폭발물의 이격 거리를 통해 평가하여 내진 상세 적용 시 폭발 저항 성능이 향상된다는 것을 입증하였다.

터널 내 주행시 도로이용자에게 주행 쾌적성 및 안전성 향상을 위하여 터널 콘크리트 포장 표면에 고성능 표면처리 공법(NGCS : Next Generation Concrete Surface), 다이아몬드 그라인딩 공법(DG : Diamond Grinding) 등을 적용하고 있다. 최근 개통된 노선 중에서 표면처리 공법을 적용한 터널 포장에 대하여 미끄럼저항(ASTM E 274) 및 타이어-노면 마찰소음(ISO 11819)을 측정하였다. NGCS가 적용된 터널구간은 평택제천선 금성터널(공용 약 25개월), 울산포항선 양북1터널(공용 약 12개월), 서울양양선 인제터널(공용 약 1개월)이며, DG가 적용된 구간은 평택제천선 산척4터널(공용 약 25개월)이다. 미끄럼저항 측정결과를 그림 1에 나타내었다. NGCS 적용구간의 미끄럼 저항이 DG구간보다 다소 낮았으나 모두 유지관리기준을 만족하였다. 타이어-노면 마찰소음 측정결과를 그림2에 나타내었다. NGCS 적용구간이 DG 적용구간보다 소음이 더 작게 발생하는 것으로 분석되었다.

Fuel consumption in fisheries is a primary concern due to environmental effects and costs to fishermen. Much research has been carried out to reduce the fuel consumption related to fishing operations. The fuel consumption of fishing gear in fishing operation is generally related to hydrodynamic resistance on the gear. This research is to propose a low drag generated midwater trawl in terms of the gear design improvement using simulations. The results from the simulation were verified with results that mirrored the model experiments. From the results, the resistance force of the proposed gear decreased to 29% compared to that of the current gear. Furthermore, the gear performance also improved with increased gear mouth compared to the current one. Therefore, the proposed gear will be helpful to reduce the greenhouse gases from fishing operation. It will also contribute to the fishing industry by saving fuel.

This paper investigated impact resistance capacity and failure mode of strengthened column with PROTECT (Poly-Resilience-Oriented hybrid TEChnology plaTe) panel by analytical study. PROTECT panel is the composite panel with two steel plates and nano-composite. In order to perform impact analysis, dynamic properties of concrete, steels and nano-composite were determined. Finite element analysis was performed with these properties under the drop-weight impact. From the FEA, different failure modes corresponding to different columns were derived.

본 연구에서는 연륙연도 사업에 대응하는 경제성 및 안정성을 갖춘 쌍동선형 차도선의 개발을 위해 U형과 V형의 서로 다른 쌍 동선형을 CFD 해석을 수행하여 저항성능을 비교하였다. CFD 해석 결과 U형 쌍동선형의 경우 14kts 이상의 고속에서 선수부 파형에 이상 이 발생하여 정상적인 운행이 불가능하다 판단되었으며, 이에 비해 V형은 동일한 속도에서도 이상이 발생하지 않았으며, 또한 U형 쌍동선 형 대비 V형 쌍동선형의 경우, 저속에서는 U형 대비 높은 침수표면적에도 불구하고 거의 같은 RTS값을 보이지만, 고속으로 넘어가면 U형 에 비해 확연히 낮은 RTS값을 보임을 확인, V형의 쌍동선형이 U형에 비해 저항성능이 개선됨을 확인하였다.

In this study, electric propulsion leisure boat with 9 meters length is designed and the performances are investigated by CFD analysis and model test. Maximum speed of the developed boat is 15knots(7.7 m/s) using 80Kw electric motor. Catamanan type hull form with slender body is adopted considering high Froude number and large deck area. Two kinds of hull forms are designed and the performances are compared in resistance point of view. Wave patterns are observed to make clear the relationship between resistance performance and wave characteristics. The results show that not only wave interaction due to shoulder waves but also stern waves have a strong influence on resistance performance and CFD analysis including free surface can give useful informations at initial ship design stage for high Froude number catamaran boat.

본 연구에서는 카누 선체 재료를 탄소섬유복합재료로 선정하였으며, 선형설계는 선박 설계 상용프로그램인 SOLIDWORKS를 이용하여 수행하였다. 카누의 유동해석은 상용프로그램인 STAR-CCM+를 이용하여 자유수면의 파형을 살펴보고 수치해석 결과를 통하여 저항성능을 확인하였다. 그 결과, 흘수가 0.09 m일 경우에 4 m/s 미만의 선속으로, 흘수가 0.24 m인 경우에는 2 m/s 미만으로 운항하면 안전하다고 판단되며, 두 명의 성인이 속도를 내는 데에도 무리가 없음을 확인하였다. 또한, 해석결과를 적용하고 CFRP를 이용하여, 기존의 재료보다 20 % 가볍게 제작된 카누에 대해서도 간략히 소개하였다.

Mobile fish-cage was developed assuming a cage net with an enclosed area, which and estimated the hydrodynamic characteristics of the cage through the model experiment. Flux-shielding plates, installed in the bow were compared with the resistance test carried out by making a hole, bilge keel and stud, and basic block flow rate consisting of the results to a flat surface plate. The experimental results confirmed the improved resistance performance effect of 3~6% in the bilge keel and the stud form. To assess the stability of the fish-cage, evaluation of the stability in accordance with the stability criteria for determining the floating docks had confirmed that it satisfied the static stability performance under operating conditions at sea.

이 논문에서는 벽체의 형상(평면벽체, 곡면벽체) 및 벽체에 도입된 긴장력이 충돌저항성능에 미치는 영향을 수치해석적 기법을 사용하여 평가하고자 하였다. 벽체의 곡률 및 긴장력 도입률을 변수로 총 12 케이스의 충돌해석을 수행하였으며, 충돌체로는 상용 민항기엔진의 3차원 상세모델을 사용하였다. 충돌저항성능을 평가하기 위해 관입깊이와 벽체 중앙부 후면의 최대 변위를 비교하였다. 긴장력의 도입에 의해 관입깊이는 약 60∼80% 수준으로 감소하는 것으로 나타났으나, 후면 변위는 큰 차이가 나타나지 않았으며, 벽체 형상에 따른 차이는 상대적으로 크지 않은 것으로 나타났다.

This study investigates the analytical study for evaluating impact resistance capacity and failure mode of PROTECT (Poly-Resilience-Oriented hybrid TEChnology plaTe) panel. PROTECT panel is a composite panel with two steel plates and nano-composite. In order to perform impact analysis, dynamic properties of steels and nano-composite were determined. Finite element analysis is performed with these properties under the drop-weight impact. From the FEA, different failure modes corresponding to different impact energy is derived.

This study is the compared seismic performance that are difference between the performance of structures on various site classes and beam-column connection. this analysis model was designed the previous earthquake load. To compare the performance levels of the structure was subjected to nonlinear static and nonlinear dynamic analysis. Nonlinear analysis was used to The Perform 3D program. Nonlinear static analysis was compared with the performance point and Nonlinear dynamic analysis was compared the drift ratio(%). Analysis results, the soft site class of the displacement was more increase than rock site classes of the displacement. Also The smaller the displacement was increased beam-column connection stiffness.

In the present study, numerical analysis algorithm for the hull form optimization was taken into account using optimization algorithm. In this algorithm the sequential quadratic programming method was applied as an optimizer and the potential-based panel method was adopted to get the wave resistance coefficient as the objective function. The hull form was modified using the B-spline surface modeling technique during the whole optimization process. The developed numerical analysis algorithm was applied to a passenger ship and the optimized ship were compared with the original ship.