A series of experiments were designed to determine the feasibility of single dose of FSH as an effective superovulation method in rabbits. The superovulation treatments examined comparatively were as follows: 1) a single injection of 100 IU PMSG, 2) Multiple injections of 1 IU Super-OV of 2X daily for 3 days, 3) Multiple injections of 6.6 rng Folltropin-V 2X daily for 3 days, 4) Multiple injections of 13.3 rng Folltropn-V l daily for 3 days, 5) Single injection of 40 mg Folltropin-V solved in 10% PVP, and 6) Single injection of 40 mg Folltropin-V dissolved in 25% PVP. The results obtained were as follows: The nurnher of ovulation points in the single injection of 40 mg Folltropin-V dissolved in 25% PVP and multiple injections of 6.6 mg Folltropin-V 2X daily for 3 days was averaged 44.6 and 39.2, respectively, which were significantly (P<0.05) more than in a single dose of PMSG or multiple doses of Super-OV. The number of total ova recovered in the single injection of 40 mg Folltropin-V dissolved in 25% PVP and multiple injections of 6.6 mg Folltropin-V 2X daily for 3 days was averaged 30.4 and 25.9, respectively, which were significantly (P<0.05) more than in the single dose of PMSG or multiple doses of Super-OV. A similar result was obtained for the number of fertilized ova recovered from the above six treatments. From the above results it was concluded that a single injection of 40 mg Folltropin-V dissolved in 25% PVP could be an effective and simple method for superovulation in rabbits.

The efficiency of thermoelectric devices for different applications is known to depend on the thermoelectric effectiveness of the material which tends to grow with the increase of its chemical homogeneity. Thus an important goal for thermal devices is to obtain chemically homogeneous solid solutions. In this work, the new process with rapid solidification (melt spinning method) followed by hot pressing was investigated to produce homogeneous material. Characteristics of the material were examined with HRD, SEM, EPMA-line scan and bending test. Property variations of the materials were investigated as a function of variables, such as dopant quantity and hot pressing temperature. Quenched ribbons are very brittle and consist of homogeneous , solid solutions. When the process parameters were optimized, the maximum figure of merit was 2.038×10-3K-4. The bending strength of the material hot pressed at 50 was 8.2 kgf/.

solid solutions are of great interest as materials for thermoelectric energy conversion. One of the key technologies to ensure the efficiency of thermoelectric device is to obtain chemically homogeneous solid solutions. In this work, the new process with rapid solidification followed by hot pressing was investigated to produce homogeneous thermoelectric materials. Characteristics of the materials were examined with XRD, SEM, EPMA-line scan and bending test. Property variations of the materials were investigated as a function of variables, such as excess Te quantity and hot pressing temperature. Quenched ribbons are very brittle and consisted of homogeneous , solid solutions. When the process parameters were optimized, the maximum figure of merit was 3.073. The bending strength of the material, hot pressed at 45, was 5.87 kgf/.

몇가지 협력제의 7-ethoxy precocene II와 협력작용을 통한 활성증가와 작용기작을 구명하기 위하여 mikweed bug, Oncopeltus fasciatus 2령충에 항유약호르몬유사물과 협력제가 처리된 petri dish에 접종하여 생리활성 정도를 측정하였다. 얻어진 결과는 다음과 같다. 7-Ehtoxy precocene II의 반수활성농도는 g/이었다. 7-Ethoxy precocene II와 다른 산화저해제인 RO20-9747의 협력비가 14.05로 가장 높았고 그들의 반수활성농도는 이었다. 7-Ethoxy precocene II와 다른 협력제 1종, 2종, 4종을 조합을 달리하여 처리하였을 때 뚜렷한 협력작용 증가효과를 가져오지 못했다. 이상의 결과에서 다른 협력제들은 곤충의 방어기작을 알라타체를 포함하여 비선택적으로 저해하는 것으로 생각되었으나 RO20-9747은 7-ethoxy precocene II가 알라타체로 이행하는데 까지 곤충의 방어적 산화기작인 monooxygenase 활성을 선택적으로 저해함으로써 7-ethoxy precocene II가 알라타체로 이행량이 증가하여 활성증가를 가져온 것으로 생각되었다.

본 연구에서는 Biot의 선형압밀이론에 근거한 2차원 압밀문제의 근사해를 구하기 위한 경계요소법을 제시한다. 먼저 선형 압밀문제의 기초미분방정식의 시간의존성을 제거하기 위하여 시간에 대한 Laplace변환을 적용시키고, 변환공간에서의 미분방정식을 대상으로 정식화를 한다. 변환공간에서의 변위와 간극수압에 대한 경계적분방정식계를 유도하고, 변환공간에서의 연성문제에 대한 기본해를 구체적으로 보인다. 변환공간에서의 해를 실공간의 해로 변환하기 위하여 Hosono의 수직 Laplace역변환법을 적용하였으며, 해석예로서 2차원 반무한 지반의 국소재하에 의한 압밀문제를 해석예로 선택하였고, 암밀해와 비교하여 제안해법의 적용성 및 타당성을 보였다.

Background : Foliar fertilizer materials are used in the field of ginseng farming to enhance the growth of ginseng. The law for ginseng industry prohibits the use of chemical fertilizer as a material for growing ginseng, but in recent years, various organic materials derived from natural materials have been produced and used in farming sites. The purpose of this study was to investigate the effects of foliar fertilizer on the growth and soil properties of ginseng during continuous use. Methods and Results : For the test materials, native seedlings were used and the amino acid solution, liquid silicate, microbial liquid and fermentation enzyme were treated from 2 to 5– year-old ginseng after transplantation. The test plots were carried out to 3 repetitions by randomized block design. The area of one plot was 3.24 ㎡. The treatments were foliar application three times at intervals of 10 days from the late of May when leaf development was completed. The chemical properties of each foliar fertilizer pH was the highest at 9.63 for liquid silicate and lowest at 5.85 for amino acids. Ammonium nitrate had the highest amino acid content (56 ㎎/ℓ). Phosphorus was the highest with 113.7 ㎎/ℓ of fermentation enzyme. As a result of foliar fertilization for 4-years up to 5-years of ginseng, the pH was similar in soil chemical properties. EC and nitrate nitrogen contents tended to be higher in foliar application than in non-treatment. In the photosynthesis of ginseng, fermentation enzyme and microbial treatment tended to be high. Thickness of ginseng leaf was the thickest in microbial treatment. Microbial treatment was the highest in the underground part. Soil chemical properties were also affected but there was no significant change to inhibit the growth of ginseng. Conclusion : The treatments of the foliar fertilizer were more effective than the no treatment on the growth of ginseng. Among the foliar fertilizers distributed on the market, those derived from natural products can be used in ginseng cultivation.

독도연구의 기본방향은 독도연구에 참여하고 있는 학자의 학문분야마다 다를 수 있고, 또 특정학술분야에 소속되어 있는 학자마다 다를 수 있다고 본다. 더 나아가 독도연구소마다 각기 다른 연구방향이 제시될 수 있다고 본다. 그러나 여기서 저자가 의미하는 독도연구의 기본방향은 개별 학자와 전문가의 전공분야와 학문분야를 초월해서, 각 독자연구소의 설립목적을 초월해서 대한민국이라는 국가의 입장에서 포괄적, 총체적인 독도연구의 기본 방향으로 정의하기로 한다. 그러나 이렇게 하면 독도연구의 기본방향의 제시는 국가의 과제에 속하는 것이 되고, 민간 대학 연구소로서 영남대학교 독도연구소의 범위를 넘게 된다. 따라서 저자는 독도연구의 기본방향을 제시한다기보다 그간 독도를 연구하면서 느낀 소박한 소감을 토로하여 향후 한국의 독도연구의 기본방향 제시에 미호의 참고가 되었으면 하는 과욕을 가져본다. 저자는 국제법 전공자이므로 결국 이 소감의 토로도 국제법의 영역에서의 편파적 소감이라는 비판을 받을 수 있다는 것을 자인한다. 그러나 국제법학자 이외의 독도연구학자, 특히 사학자에게 친국제법 연구를 권고해 보려는 것이 저자의 솔직한 심정이다. 이하 선제적 연구로 “독도연구에서 국제법과 사학의 관계”, “국제법의 법원”, “역사적 권원의 대체”, “지도의 증명력” 그리고 “지리적 접근론”에 관해 논술하기로 한다. 그리고 연구방법상의 제의에서 “학제연구”, “연구결과의 보급” 그리고 “독도연구소의 특성화연구”에 관해 논술하기로 한다. 마지막으로 독도에 대한 학제 연구의 필요성과 독도연구 결과의 대중화 필요성을 제의해 본다.

본 연구는 실리콘계 정포제의 특성에 따른 폴리우레탄 폼 지수제의 cell 구조와 흡수량 변화를 알아보기 위하여 6종의 정포제를 사 용하여 폴리우레탄 폼 지수제를 제조하여 FE-SEM으로 분석한 결과 실리콘 정포제의 실록산 주사슬 말단에 PO n개가 결합되어 있는 DC-193, DC-2585, DC-5125, DC-198의 cell 구조는 close cell로 확인이 되었고, 실리콘 정포제의 실록산 주사슬 말단에 EO n개가 결합 되어 있는 DC-5043과 DC-5598은 open cell 구조로 나타났다. 또한 cell 구조 변화에 따른 흡수량 에서는 close cell의 크기가 가장 세밀하고 균일한 DC-193의 흡수량이 가장 적게 나타나 내수성이 가장 우수한 것으로 나타났으며 open cell의 크기가 가장 크게 형성된 DC-5043의 흡수량이 가 장 많은 것으로 나타났다. 이들의 방수성능을 콘크리트 구조물을 모사하여 시험한 결과 누수가 없음을 확인하였다.

Biodegradable oil gelling agent was prepared, and their oil absorption capacities using light oil, lubricant oil and corn oil were investigated. The result showed that the oil absorption capacity was depended on the amount of surfactant and starch added, and was increased in the order of light oil, lubricant oil and corn oil. Also, the oil-absorption capacity was saturated within 30 min at 18℃. The biodegradability of the prepared biodegradable oil gelling agent was also studied by determination of reduced sugar produced after enzymatic hydrolysis. Their surface morphologies and thermal properties of the prepared biodegradable oil gelling agent were observed by scanning electron microscopy (SEM) and thermogravimetric analysis (TGA), respectively.

Sorbents of calcined limestone and oyster particles having a diameter of about 0.63㎜ were exposed to simulated fuel gases containing 5000ppm H2S for temperatures ranging from 600 to 800℃ in a TGA (Thermalgravimetric analyzer). The reaction between CaO and H2S proceeds via an unreacted shrinking core mechanism. The sulfidation rate is likely to be controlled primarily by countercurrent diffusion through the product layer of calcium sulfde(CaS) formed. The kinetics of the sorption of H2S by CaO is sensitive to the reaction temperature and particle size, and the reaction rate of oyster was faster than the calcined limestone.

We tried to develope a desulfurization sorbent using eggshell for recycling, practicability, and economic development. The calcination character of the eggshell was examined by thermal gravimetric analysis and qualitative-quantitative character by X-ray diffractometer(XRD) and scanning electron microscope(SEM). The calcination was occurred easily in the case of eggshell and its form was changed from calcite(CaCO_3) to lime(CaO). The grain and pore sizes of the calcined sample after base-treatment were larger and more crystallic. The adsorption ability of the eggshell was two- to six-times in the calcination temperature more than in the grain size. Therefore, the eggshell was thought to be usable as the desulfurization sorbent.