The purpose of measuring a dam operated after design & construction is to properly operate reservoir and maintain dam structural safety by comparing the really measured data for the behavior of dam with the data for design & construction, the past mesured data and analyzing them. In this paper, the really measured data is analized for a dam facilitiy located near a seismic epicenter of earthquake that occurred on 12th, Nov. 2016 in Gyeong-ju and the results of safety inspection for a dam is shown by comparing the behavior of dam before and after occuring earthquake

The purpose of measuring a dam operated after design & construction is to properly operate reservoir and maintain dam structural safety by comparing the really measured data for the behavior of dam with the data for design & construction, the past mesured data and analyzing them. In this paper, the really measured data is analized for a dam facilitiy located near a seismic epicenter of earthquake that occurred on 12th, Nov. 2016 in Gyeong-ju and the results of safety inspection for a dam is shown by comparing the behavior of dam before and after occuring earthquake.

The roots of Platycodon grandiflorum species either dried or fresh, are used as an ingredient in salads and traditional cuisine in Korea. To interpret the root proteins, a systematical and targeting analysis were carried out from diploid and tetraploid roots. Two dimensional gels stained with CBB, a total of 39 differential expressed proteins were identified from the diploid root under in vivo condition using image analysis by Progenesis Same Spot software. Out of total differential expressed spots, 39 differential expressed protein spots (≥ 1.5-fold) were analyzed using LTQ-FTICR mass spectrometry. Except two proteins, the rest of the identified proteins were confirmed as down-regulated such as Isocitrate dehydrogenase, Proteasome subunit alpha type-2-B. However, the most of the identified proteins from the explants were mainly associated with the oxidoreductase activity, nucleic acid binding, transferase activity and catalytic activity. The exclusive protein profile may provide insight clues for better understanding the characteristics of proteins and metabolic activity in various explants of the economically important medicinal plant Platycodon grandiflorum.

Salt stress is one of the major abiotic stresses affecting the yield of ginseng (Panax ginseng C. A. Meyer). The objective of this study was to identify bio-marker, which is early responsive in salt stress in ginseng, using proteomics approach. Ginseng plants were exposed to 5 ds/m salt concentration and samples were harvested at 0, 6, 12 and 18 hours after exposure. Total proteins were extracted from ginseng leaves treated with salt stress using Mg/NP-40 buffer and were separated on high resolution 2-DE. Approximately 1003±240 (0 h), 992±166 (6 h), 1051±51 (12 h) and 990±160 (18 h) spots were detected in colloidal CBB stained 2D maps. Among these, 8 spots were differentially expressed and were identified by using MALDI-TOF/TOF MS or/and LC-MS/MS. Ethylene response sensor-1 (spot GL 1), nucleotide binding protein (spot GL 2), carbonic anhydrase-1 (spot GL 3), thylakoid lumenal 17.9 kDa protein (spot GL 4) and Chlorophyll a/b binding protein (spot GL 5, GL 6) were up-regulated at the 12 and 18 hour, while RuBisCO activase B (spot GL 7) and DNA helicase (spot GL 8) were down-regulated. Thus, we suggest that these proteins might participate in the early response to salt stress in ginseng leaves.

For friction-type anchor general, pull-out resistance is exhibited by only fixing length frictional resistance. In order to ensure sufficient pull-out resistance excessive length and number of anchor is required. Thereby, including pressure-type and hybrid-type anchor is required. However, the standards for friction-type anchor are established in most of the national standards but specific design method for pressure-type and hybrid-type anchor is not been established. In this paper, we review behavioral characteristics of the hybrid-anchor body expanded in two stages using finite element analysis under the underground condition.

본 연구에서는 X선 조사에 의해 생성된 전하의 이동현상을 조사하기 위해 비행시간 측정방법을 이용하였다. 이 측 정기술은 일반적으로 디지털 X선 영상 변환물질의 전하 트랩 및 수송현상에 유용한 방법이다. 비행시간 측정법을 이용 하여 a-Se 광도전체의 전하 수송자의 과도시간 및 이동속도를 측정하였다. 시편제작을 위해 열증착법을 이용하여 유 리기판위에 400 ㎛ 두께의 a-Se 필름을 제작하였다. 측정결과, 전자와 정공의 과도시간은 10 V/㎛의 전기장에서 각각 229.17 ㎲ 와 8.73 ㎲ 였으며, 이동속도는 각각 0.00174 ㎠/V․s, 0.04584 ㎠/V․s 였다. 측정결과, 전자와 정공의 이 동 속도의 측정값에 다소 큰 차이를 보였으며, 이 결과로부터 전하수송 및 트랩 기전을 분석하는데 이용하였다.

참나리 2, 3배체 복합 배수성 집단에서 형태적, 지리적 분화를 명확히 하기 위해서 173개 군락에서 수집된 참나리의 38개 형질에 대한 분산분석(ANOVA)과 주성분분석(PCA)을 수행하였다. 그 결과, 173개 참나리 개재들은 배수성에 의해 78개의 2배체와 95 개체의 3배체로 구분되었고, 3배체는 지리적 분포와 형태적 특성에 의해 73개의 내륙 3배체(남한 전지역)와 20개의 섬지역 3배체(백령도와 소청도)로 구분되었다. ANOVA분석에서 섬지역 3배체는 잎과 꽃의 여러 형질들에 의해 내륙의 3배체와 뚜렷한 형태적 차이를 나타내었다. 주성분 분석에 의한 누적기여율은 4차 주성분까지 44.1%를 나타내었고, 주성분분석에서 2배체는 긴 초장, 작은 꽃의 형질들, 높은 화분임성, 더 많은 기공 수 등의 형질에 의해 내륙의 3배체와 구분되었다. 섬지역 3배체도 약간의 중복은 있었으나 1, 2차 주성분에 대한 2차원 분포도에서 서로 구분되었다. 한편, 배수성이 다를지라도 섬지역 3배체와 2배체는 주성분 1과 2의 요인에 의해 완전한 중복을 나타내었다. 이러한 사실은 섬지역 3배체와 2배체가 외형적으로 유사하다는 것을 반영한다. 이와 같이 섬지역과 내륙의 3배체의 형태적 차이는 지리적 기원을 반영하는 것으로 생각된다.