본 연구의 목적은 스마트시티 구축의 핵심인 수소연료전지의 활용형태를 분석하고 해결방안을 제시하는 것이다. 수소연료전지를 활용하는 발전소의 경우 간헐성 문제가 없다는 장점 때문에 향후 가장 유망한 사용 형태로 분석됐다. 다만 많은 장점에도 불구하고 폭발 우려와 특정 수소 생산방식의 경우 이산화탄소 발생 문제 등으로 지역주민들의 반발이 지속적 으로 나타나고 있어 이를 해결하는 것이 스마트시티 구축의 주요 관건이 될 것으로 분석된다. 마지막으로 현재의 수소 생산 방식을 분석하고 이에 따른 문제점을 파악하여 스마트시티의 완전한 구축을 위한 해결책을 제시하였다.

본 연구는 식품 영역에서 제품 패키지의 광택이 소비자들이 인식하는 기업 친환경성과 제품 품질에 미치는 영향을 확인하고, 최종적으로 구매의도에 차이를 유발하는지 확인하고자 실시되었다. 실험 참가자들은 패키지에 광택이 도 는 유광 조건과 광택이 없는 무광 조건으로 무선 할당되었으며, 케첩과 감자칩 제품을 보고 기업 친환경성 인식, 품질인식, 구매의도를 묻는 문항들에 응답하였다. 연구 결과, 소비자들은 무광 패키지 제품을 제조한 기업이 유광 패키지 제품을 제조한 기업보다 더 유기농 재료를 사용할 것이며, 더 친환경적일 것이라고 인식하였다. 또한 소비자 들은 기업이 친환경적일 것이라고 인식할수록 제품의 품질을 높게 평가하였으며, 더 높은 구매의도를 보였다. 본 연구는 패키지 광택의 효과를 친환경 식품 영역에서 기업 이미지 인식에까지 확장하였으며, 패키지 광택을 이용한 친환경 마케팅 방식을 제안했다는 점에서 이론적, 실무적 의의를 가진다. 본 연구의 한계, 가능한 향후 연구 방향도 함께 논의하였다.

PURPOSES : In this study, an eco-friendly mastic asphalt backfill material is developed to reduce production and construction temperatures by 40 ℃ compared with those recorded when using conventional hot-mix mastic asphalt backfill materials. METHODS : To reduce the production and construction temperatures, SIS polymer modifiers and gum rosin were selected, and gum rosin-modified SIS materials were applied to the mastic asphalt binder mix design. SIS is less viscous than SBS at high temperatures owing to its thermal characteristics, and incorporating gum rosin into SIS causes the latter to exhibit a loose and soft structure. To improve the performance of the mastic asphalt modified with SIS and gum rosin, three different filler mixes, i.e., 100% PMMA, 50% PMMA and 50% calcium carbonate, and 40% PMMA and 60% calcium carbonate were applied. RESULTS : The rosin-modified SIS reduces the viscosity of the developed mastic asphalt binders. In particular, incorporating 3.7% of gum rosin is beneficial to the mastic binder and does not degrade its low-temperature performance. Similarly, using 100% PMMA as a filler improves the performance but results in workability issues at high temperatures. CONCLUSIONS : Rosin-modified SIS and PMMA are promising alternatives for increasing the workability at high temperatures while maintaining the target performance of grade PG82-22 binders if the appropriate ratio of calcium carbonate is mixed with PMMA and an alternative filler comprising calcium carbonate is used.

The overall process, from the pre-treatment of aluminum substrates to the eco-friendly neutral electroless Ni-P plating process, was observed, compared, and analysed. To remove the surface oxide layer on the aluminum substrate and aid Ni-P plating, a zincation process was carried out. After the second zincation treatment, it was confirmed that a mostly uniform Zn layer was formed and the surface oxide of aluminum was also removed. The Ni-P electroless plating films were formed on the secondary zincated aluminum substrate using electroless plating solutions of pH 4.5 and neutral pH 7.0, respectively, while changing the plating bath temperature. When a neutral pH7.0 electroless solution was used, the Ni-P plating layer was uniformly formed even at the plating bath temperature of 50 oC, and the plating speed was remarkably increased as the bath temperature was increased. On the other hand, when a pH 4.5 Ni-P electroless solution was used, a Ni-P plating film was not formed at a plating bath temperature of 50 oC, and the plating speed was very slow compared to pH 7.0, although plating speed increased with increasing bath temperature. In the P contents, the P concentration of the neutral pH 7.0 Ni-P electroless plating layer was reduced by ~ 42.3 % compared to pH 4.5. Structurally, all of the Ni-P electroless plating layers formed in the pH 4.5 solution and the neutral (pH 7.0) solution had an amorphous crystal structure, as a Ni-P compound, regardless of the plating bath temperature.

The successful implementation of green supply chain management(GSCM) practices requires a level of cooperation that can be difficult to conduct. Despite this challenge, limited scholarly attention has been paid to exploring how the implementation of GSCM practices can be effectively facilitated and enhanced through accumulated social capital with suppliers. Based on social capital theory, this study postulates that supplier network characteristics derived from social capital with key suppliers can be critical antecedents of GSCM, which in turn enhances the firm’s environmental performance. To test hypotheses, data were collected from 330 firms in 15 countries, and structural equation modeling was employed. Results show that GSCM improves environmental performance, and structural and cognitive social capitals of the supplier network act as antecedents and lead to GSCM implementation.

In this paper, cycle performance analysis of two-stage compression two-stage expansion refrigeration system using eco-friendly refrigerants is presented to offer the basic design data for the operating parameters of the system. Eco-friendly refrigerant R600a(Isobutane) for freon refrigerant R22 were used working fluids in this study. The coefficient of performance(COP) of R600a is about 5% greater than that of R22 two-stage compression refrigeration system in the range of evaporation temperature –30℃∼-60℃. The coefficient of performance of two-stage compression and two-stage expansion refrigeration system decreases with the increasing condensation temperature and superheating degree but increases with the increasing evaporation temperature, subcooling degree and mass flow rate ration of intercooler.

Paddy fields are important habitats for maintaining the biodiversity of agricultural ecosystems. Recently, as the need for safe food and biodiversity conservation has increased, the rice cultivation methods have undergone changes. This study was conducted to investigate the fish fauna in Environmentally Friendly Paddy fields (EFP) and Conventional Paddy fields (CP), and compare the characteristics of Misgurnus anguillicaudatus and Aphyocypris chinensis populations in EFP and CP. A total of 2,703 fish were collected and classified into six families and 13 species. Our results showed that there was a difference in the proportion of fish populations in the two paddy fields, and the number of individuals in EFP was higher than in CP. The weight values of M. anguillicaudatus were higher in EFP than in CP, and the total length, body length, and weight values of A. chinensis were higher in EFP than in CP. Conditional factor (K) values also showed similar trends in EFP and CP. Our results indicate that the farming practices in paddy fields have a significant effect on the characteristics of M. anguillicaudatus and A. chinensis populations, and the results of this study can be used as basic data for securing biodiversity in future agricultural ecosystems.

Various eco-friendly seed disinfection technologies have been developed due to the increase in the global demand for organic food. In order to produce sustainable and eco-friendly agricultural products in Korea, seed disinfection technologies for the production of wholesome seedlings have been researched in diverse ways compared to how they were examined in advanced countries. Both domestically and internationally, the eco-friendly seed disinfection technologies to secure the horticultural crops have been treated by biological or physical methods, such as hot water treatment with ultrasonic disinfection technology, or applying organic agricultural materials like organic acids in plant extracts. However, from a practical perspective, various applied technologies can be implemented in farm fields to disinfect significant agricultural crops, such as lettuce, Chinese cabbage, radish, watermelon, cucumber, paprika, red pepper, ginger, ginseng, and sesame seeds.