In order to clarify the characteristics of Photo-Volatic(PV) power generation over the Korean peninsula with complex terrain, special meteorological observation campaign was carried out for one year from 25 May 2011. Analysis is based on the comparison between observed meteorological elements and PV values generated at rated capacity 200 kW power plants. Solar radiation observed at 15° inclined surface is 11 % larger than that observed at horizontal surface due to low elevation angel of the sun during winter season. The PV power generation tend to be more similar the variation of inclined surface irradiance than horizontal surface irradiance. Increasing air temperature often induce disturbance of the PV power generation. However, the higher the air temperature in winter season, the higher PV power generation because the PV module may be more activated at higher air temperature. PV generating efficiency tends to be conversed the value of 15%.

In this paper, the structural characteristics of the tracking-type floating PV generation system are presented. Moreover, the structural safety of each tracking-type floating PV generation system is estimated from the analytical results obtained by the finite element analyses.

The floating PV generation system is consisted of unit structures linked by the hinge type connection because the effect of bending moment in the structural system loaded due to the unstable movement of water surface can be minimized. In this paper, the investigation and development process of floating PV generation unit structure is presented.

The composition of rural Green Village requires higher utilization of renewable energy in those selected rural villages. The purpose of this study is to select the best results of rural green villages when using photovoltaic power system(PV system). 10 different rural villages in Chubumyeon, Keumsan, Chungnam province, were selected as study villages. This study shows measured solar radiation data, a 20-year time series data, and GIS spatial analysis; and whose were used to predict the photovoltaic power generation. PV system is used as a form with capacity of 3kWp to use for personal and public houses. Generation data was calculated by the town, where the economics of the Green Village location analysis was performed; and the solar radiation's correction factor was calculated by the 20-year time series data and measured data by study villages. By applying to the data of DEM, slope and aspect of the study villages were found, therefore performed. Spatial analysis tools were performed by using solar radiation map's tools. Those data found were used to calculate the average needed energy every months. When used the properly calculated data, towns performed economical energy consumption in rural Green Village. Every study villages have showed very high potential for PV system. Sungdangri ranked at the first (7,401kWp/year), Jangdaeri follows behind to the second (7,203kWp/year) and Yogwangri at third (7,89kWp/year) which shows higher developed energy than other study villages. The areas covered of these three towns are as follows: Sungdangri at 33,300㎡, Jangdaeri covers 18,000㎡ and Yogwangri shows 46,800㎡. With these results, analyzing the potentials using GIS spatial analysis before installation of PV system was possible. Also different villages and topography in study villages have showed various results by the area. For convenience and to shorten research time, it is possible and enough to use solar radiation tools when studying spatial analysis of solar radiation.

In this paper, we suggest the new floating type photovoltaic energy generation system, which is improved the structural and economical efficiency, compared with the system developed in the previous research. The structural system in new floating type photovoltaic energy generation system reveals better in structural performance.

본 논문에서는 온도와 습도 및 냉·난방을 조절하여 건물 내의 쾌적한 환경을 제공하기 위한 승압쵸퍼와 PWM 전압 형 인버터로 구성된 태양광 발전 시스템을 제안하였다. 이 시스템은 안정된 변조를 위해 원칩 마이크로프로세서를 사 용하여 동기신호와 제어신호로 처리하였다. PWM 전압형 인버터와 위상의 동기를 위하여 계통전압을 검출하여 계통전압과 인버터 출력을 동상 운전하므로 잉 여전력을 연계할 수 있게 하였으며, 건물이나 병원 등 특정 건물의 온도 및 습도센서에 적용하여 양호한 동특성을 얻 을 수 있었다. 또한 시스템에 적용한 결과 고역률과 저고조파 출력을 유지함으로써 부하와 계통에 전력이 안정하게 공급될 수 있 도록 제어하여 좋은 결과를 얻을 수 있었다.

본 논문에서는 태양광 발전시스템을 이용한 PWM(Pulse Width Modulation) 전압형 인버터를 전력변환기로 구성하 였고, 안정된 변조를 위해서 동기신호와 제어신호를 56F8323 마이크로프로세서에 의해서 처리하였다. PWM 전압형 인버터는 태양전지가 연속 발전할 수 없는 단점을 보완하기 위해 일반 상용전원과 연계함으로써 약 10～20[%]의 전 력 절감 효과를 얻을 수 있는 에너지 절약 전원 복합형 전력변환장치로 구성하였다. 그리고 PWM 전압형 인버터와 위 상동기를 위해서 계통전압을 검출하고 계통전압과 인버터 출력을 동상 운전하므로 잉여전력을 계통과 연계할 수 있게 하였다. 또한, 고조파를 절감한 출력을 유지함으로써 부하와 계통에 전력이 안정하게 공급될 수 있도록 제어 시스템을 적용하여 좋은 결과를 얻을 수 있었다.