The objective of the present study is to investigate the increase in the functional characteristics of a substrate by the formation of a thin coating layer. Thin coating layers of have high potential because exhibits high hardness. Shock induced reaction synthesis is an attractive fabrication technique to synthesize uniform coating layer by controlling the shock wave. Ti and Si powders to form using shock induced reaction synthesis, were mixed using high-energy ball mill into small scale. The positive effect of this technique is highly functional coating layer on the substrate due to ultra fine substructure, which improves the bonding strength. These materials are in great demand as heat resisting, structural and corrosion resistant materials. Thin coating layer was successfully recovered and showed high Vickers' hardness (Hv=1183). Characterization studies on microstructure revealed a fairly uniform distribution of powders with good interfacial integrity between the powders and the substrate.

이 연구에서는 플라즈마 제염 기술의 실용화를 위해 , , 등의 반응성 플라즈마 기체를 이용하여 원자력 시설의 주요 오염원인 코발트 핵종에 대한 표면 제염 모의실험을 수행하였다. 디스크 형태의 금속코발트에 대하여 시편 표면 온도를 변수로 플라즈마 식각 실험을 수행한 결과 반응율은 에서 기체의 경우 그리고 와 기체의 경우 각각 과 이었으며, 이들 반응의 활성화에너지는 각각 39.4 kJ/mol, 42.1 kJ/mol, 116.0 kJ/mol이었다. 이와 함께 AES (Auger Electron Spectroscopy)를 이용하여 반응 생성물 성분 분석 결과 이들 반응의 주요 반응 기구는 코발트의 불화 반응임이 밝혀졌다. 이 연구를 통해 확보된 의 금속 표면 식각율은 주요 반도체 공정의 식각율을 뛰어넘는 높은 식각율로 플라즈마 제 염 기술의 실용화를 앞당길 수 있는 고무적인 결과라 할 수 있을 것이다.

소화시스템에 사용되는 고압의 소화가스 저장용기에는 저장용기의 파손을 막아주는 안전밸브가 있다. 이러한 안전밸브의 내부에는 원형 박판의 파열 판이 들어 있는데, 저장용기의 내압이 위험수준에 도달하면 파열 판이 파손하여 내압을 배출하는 역할을 한다. 안전밸브의 설계인자는 파열 판의 두께, 안전밸브의 유로 직경, 플라스틱 패킹 링의 내부 직경 그리고 파열 판을 고정하는 볼트 안쪽의 필렛 반경이 있다. 이중에서 파열 판의 두께는 0.2mm로 고정을 하였다. 요인배치법을 사용하여 주효과를 결정하였고 회귀방정식을 유도하였다. 이러한 회귀방정식은 추후 안전밸브의 설계에 있어서 기초 설계 자료로서 활용할 수 있도록 실험 결과와 비교하여 검증하였다. 검증실험 및 회귀방정식에 의한 결과의 오차는 약 정도인 것을 확인하였다. 그리고 반응표면법을 사용하여 기밀테스트 압력인 25MPa에서 파열할 수 있는 안전밸브의 최적 모델을 결정하였다.

To determine the optimum mixing conditions of nopal jelly, samples were prepared with various compounding ratios of gelatin(16, 18, 20, 22 and 24g), sucrose(100, 120, 140, 160 and 180g), Citric acid(2, 3, 4, 5 and 6) using a central composite design. Physical and sensory evaluations were performed and considered using a response surface methodology. The optimum mixing rates which meet sensory items is gelatin 20.19g, sucrose 141.52g and citric acid 4.04g.

The purpose of study was to determine the organoleptic characteristics of homemade basil-pasta made in various compounding ratio according to central composite design. The optimum mixing condition for basil-pasta was optimized by response surface methodology. The texture, including color, flavor, elasticity and overall quality, was measured as sensory evaluation. The optimum mixing rates of durum wheat semolina, basil and egg were 73.97g, 5.95g and 36.17g for color, 53.14g, 4.52g and 35.85g for flavor, 48.75g, 2.95g and 36.85g for elasticity. The organoleptic overall quality of basil-pasta showed the maximum score in the mixing condition of 55.52 g durum wheat semolina, 4.55g basil paste and 35.51g egg.

Response surface analysis was used to study dietary ratios of n-3/n-6 fatty acid and P/S to minimize plasma triglycerides, total cholesterol and LDL · VLDL-C levels and maximize plasma HDL · C levels of rats. Because the dietary components were not statistically independent, they were studied in combinations of two variables. The two-variable combinations were the most useful in locating the desired maximum or minimum plasma triglycerides, total cholesterol and LDL · VLDL-C response in terms of the proportions of the dietary components. Response surface contours and three dimensional plots were developed for each plasma lipid response. The contours and three dimensional plots were used to help determine those combinations of the dietary fatty acid ratios that would produce the desired minimum or maximum lpid responses. The statistical analyses indicated that the minimized plasma cholesterol response levels could be attained with a diet consisting of 2.26 n-3/n-6 fatty acid and 2.15 P/S ratios.

In this paper, we proposed the optimal process conditions on the electro-gilding process. The responses are plating thickness and Sn proportion. The factors are temperature, current density, and addition. We minimized the total number of experiments based on the principle of dividing into small part. We grouped the factors using the plating process information which we already knew. We did Hull Cell test to find relationship between plating solution and electric effects, and applied ANOVA and RSM to estimate the optimal process conditions.