깔따구 (Diptera: Chironomidae)는 저서성 대형무척추동 물로 환경 및 수질 변화에 민감한 영향을 받는 중요한 환경 지표생물이다. 이러한 깔따구 유충이 정수장에서 본 연구에서는 제주 정수처리장에서 발견된 깔따구 유충의 종을 분류하기 위해 형태 사진 및 COI (cytochrome c oxidase subunit I) Primer로 증폭시킨 DNA의 염기서열을 계통수 분석을 통해 분석을 실시하였다. 정수장 내 수도꼭지와 소화관 등에서 채집된 17개체는 둥근깃깔따구 (O. tamarutilus) 14개체, 타마긴털깔따구 (P. tammaater) 3개체 총 2종으로 확인되었다. 각 깔따구 종의 형태적 특징은 두부, 하순기절, 대악, 안테나, 발톱의 형태적 특징의 분류기로 종 동정하였다. NCBI Genbank에 등록된 깔따구 19종 COI 염기서열을 기반으로 본 연구에서 조사된 17개체의 계통진화적 분석 결과 채집된 깔따구 COI 염기서열이 둥근깃깔따구 (O. tamarutilus)와 타 마긴털깔따구 (P. tammaater) 2종으로 각각 계통군 (clade)를 이루는 것이 확인되었다. 이러한 결과는 정수장 환경별 발견 되는 깔따구 유충의 다양성의 확인과 형태적-유전적 종 동정 분류정보를 바탕으로 수환경 관리 및 평가를 위한 기반 정보로 활용될 것이다.

말쥐치는 북서태평양 해역에 분포하는 군집성 어류로 수산식품으로 이용되는 경제적 가치가 높은 어종이다. 본 연구에서는 서남해에 서식하는 국내산 말쥐치 (Thamnaconus modestus)와 기존에 보고된 유사종 (Thamnaconus septentrionalis) 과의 형태적-유전적 특징을 비교-분석하였다. 이를 위해 서남해에서 채집한 말쥐치의 외부 형태와 골격을 관찰하고, 미토콘드리아 DNA의 cytochrome c oxidase subunit I (COI) 유전자 염기서열을 비교하여 유사종 (T. septentrionalis)과의 계통진화적 연관관계를 분석하였다. 서남해안 말쥐치의 외부 형태는 회갈색 바탕에 몸 전체에 흑갈색 무늬가 불규칙하게 산재된 패턴을 가지며 청록빛의 지느러미가 관찰되었다. 채집한 말쥐치에서 추출한 미토콘드리아DNA의 COI 유전자 분석결과 7종류의 염기서열 변이가 나타났으나 상동성이 전체적으로 98.8% 이상으로 유사 성이 높게 나타났다. 또한 형태적으로 말쥐치 유사종인 T. septentrionalis COI 염기서열 비교와 계통유전학적 분석 결과, 보고된 시퀀스 중 상동성이 99%로 유전적으로 말쥐치로 보여지는 두 종 (JN813099, MW485059)과 상동성 95%로 유사종으로 보이는 두 종 (EF607583, KP267619)이 확인되었다. 말쥐치와 유사종은 계통유전적 분석결과 말쥐치와 유사종의 차이를 확인하였으나 형태적 특징으로 종 분류는 어 려운 상태이다. 따라서 본 연구는 말쥐치의 외부 형태와 내부 골격 및 계통유전학적 정보를 제공함으로 말쥐치와 유사종 (T. septentrionalis)의 분류학적 재검토를 진행하는 데 주요한 정보가 될 것이다.

In this study, the purpose of this study was to examine the effect of twisting in the preparation of waterproofing in the process of unfolded donut-type staking method fire hoses in indoor hydrant system. The central pull-out method caused more twisting than the rolling method, and there was no significant difference in the number of twists according to the pull-out method in the case of male and female students. It was found that the time it took to untwist and prepare waterproofing was much shorter for male students. The angle valve and hose are connected, and the time to untwist and prepare for waterproofing after withdrawing the fire hose with the hose and nozzle connected was shorter than the unconnected state. In the rolling method, when a hose connected with two 15 m fire hoses was used and the angle valve-hose was connected, but the hose-nozzle was not connected, the least kinking occurred. The time to untwist and prepare for waterproofing was also the shortest. As a result, in the withdrawal method of the donut-type loaded fire hose in the indoor hydrant system, it is a rolling method rather than a central withdrawal method. With the angle valve and hose connected, unfold the fire hose with the hose and nozzle connected, if a large number of people unwind the twisted hose, the time to prepare for waterproofing can be shortened.

This study was conducted to determine the effects of dietary protein level and supplementation of protease on growth performance, nutrient digestibility, gut microflora, intestinal morphology and fecal noxious gas emission in weanling pigs. A total of 240 weaned pigs (Landrace×Yorkshire×Duroc, 5.82±0.3 kg) were used during 4 weeks in 2 phases (days 0-14, phase 1; and days 15-28, phase 2) feeding program based on age and initial body weight. Pigs were allocated to 2×2 factorial arrangement, including 2 protein levels (HP, high protein; LP, low protein) and 2 protease levels (with or without protease). The average daily gain in the LP treatment (357 g/d) was increased rather than the HP treatment (339 g/d). A greater avarage daily gain was observed in dietary suppiemented protease treatment (358 vs 339 g/d). Average feed intake was greater in the LP treatment (544 g/d) rather than the HP treatment (530 g/d). A greater average daily feed intake was observed in dietary supplemented protease treatment (552 vs 523 g/d). Dry matter and crude protein digestibility were increased in dietary supplemented protease treatment (82.62% and 76.08%, respectively) rather than non-supplemented treatment (81.74% and 75.13%, respectively). Ileal Lactobacillus spp. count increased in dietary supplemented protease treatment (7.42 vs 7.32 log10CFU/g). Emission of H2S was decreased in the LP treatment (4.41 ppm) rather than HP treatment (4.78 ppm). Emission of NH3 was decreased in dietary supplemented protease treatment (10.43 ppm vs 11.76 ppm). In conclusion, the decrease of dietary protein level and supplementation of protease had beneficial effects on growth performance, nutrient digestibility, gut microflora, and noxious gas emission in weanling pigs.

Bypass line과 Catalyst를 공간적으로 결합한 Bypass 일체형 탈질설비를 제안하였다. 탈질설비 내부에 설치되는 Bypass의 개폐장치 의 형태에 따른 Catalyst로의 유동 변화를 확인하기 위하여 상용프로그램인 Ansys Fluent를 사용하여 탈질설비를 모델링하고 시뮬레이션을 구성하였다. 탈질설비 내의 Catalyst로 인한 계산시간과 Mesh의 수를 줄이기 위해 Porous media방식으로 Catalyst를 모델링하였다. Catalyst로 의 입구각도와 Bypass 개폐장치의 크기를 변화시키면서 시뮬레이션을 수행하고 시뮬레이션의 결과로 Catalyst로의 유동 평균속도와 균일도의 변화를 확인하였다.

This study was conducted to understand the type of use and satisfaction of delivery food by Chinese and Korean students. In December 2019, Korean and Chinese students living in Gyeonggi Province were analyzed using SPSS. The average number of food deliveries was 1~2 times a month and used 30.7% of the Korean students and 21.8% of the Chinese students. As for how to order food for delivery, 62.2% of Korean college students took up mobile apps, and 49.0% of Chinese students took up mobile phones. In terms of satisfaction after using delivery food, Korean students scored 3.89 points for taste and 3.74 points for using a neat and convenient packaging container, while Chinese students showed the highest score of 3.69 points for past eating experiences and 3.65 points for taste. As for the factors influencing the satisfaction after using the delivered food, the food quality satisfaction (β=0.518) for Korean students and favorable menu factor (β=0.533) for Chinese students were found. Therefore, it is judged that it is necessary to continuously improve the quality, service, convenience and diversity of delivered food, and health and safety factors in order to improve the delivery patterns and satisfaction of college students.

A single postlarva (9.72 mm in standard length) specimen of Crossorhombus azureus (Alcock, 1889) belonging to the family Bothidae, was collected using a bongo net from the southern sea of Korea on December 10, 2019. This species is characterized by having spines on post basipterygial processes. It has two eyes located at the opposite side in head, which accordingly belongs to pre-metamorphosis stage. Melanophores are distributed on the dorsal and anal fin base on the right side (blind side), which is regarded as a useful identification key distinguishing C. azureus from congeneric species in their postlarval stage. A molecular analysis based on mitochondrial DNA COI sequences showed that our specimen was closely matched to adult C. azureus (K2P distance = 0.017). As there is no Korean name for the genus Crossorhombus in spite of presence of Crossorhombus kobensis and its Korean name “Go-be-dung-geul-neob-chi” in Korea, we proposed a new Korean name “Dung-geul-neob-chi-sog” for the genus Crossorhombus and “Pa-lang-dung-geul-neob-chi” for the species C. azureus.

이 연구의 목적은 소득에 따른 베이커리 제품 구매 속성과 형태에 대해서 조사하였으며, 일반적인 사항에서 전체 1,235명 중에서 여성이 59.6%, 남성이 40.4%로 여성이 남성보다 다소 많았다. 베이커리 제품 구매 속성에서 ‘건강관심형’이 40.0%로 가장 많았고, 거주지에서는 대도시 거주자가 ‘맛 관심형'이 35.8%인 반면에 중소도시 거주자는 ‘건강 관심형'(p<0.001)의 45.4%로(p<0.001), 소득이 높을 수록 건강에 대한 관심이 높았다(p<0.001). 베이커리 제품을 구매하는 소비자들은 ‘맛’ 67.1%, ‘영양’ 13.7%, ‘가격’ 7.8% 순으로 거주지에 따라 유의한 차이를 나타내었다(p<0.01). 베이커리 이용형태에서는 프랜차이즈 베이커리가 71.1%, 윈도우 베이커리 14.6%, 인스토어 베이커리 8.4%였다.

Metal three-dimensional (3D) printing is an important emerging processing method in powder metallurgy. There are many successful applications of additive manufacturing. However, processing parameters such as laser power and scan speed must be manually optimized despite the development of artificial intelligence. Automatic calibration using information in an additive manufacturing database is desirable. In this study, 15 commercial pure titanium samples are processed under different conditions, and the 3D pore structures are characterized by X-ray tomography. These samples are easily classified into three categories, unmelted, well melted, or overmelted, depending on the laser energy density. Using more than 10,000 projected images for each category, convolutional neural networks are applied, and almost perfect classification of these samples is obtained. This result demonstrates that machine learning methods based on X-ray tomography can be helpful to automatically identify more suitable processing parameters.

The damage to non-structural elements in buildings has been increasing due to earthquakes. In Korea, post-installed anchors produced overseas have been mainly used for seismic anchorage of non-structural components to structures. Recently, a new cast-in-place concrete insert anchor installed in concrete without drilling has been developed in Korea. In this paper, an experimental study was conducted to evaluate the tensile and shear strengths of the newly developed anchor under monotonic load. The failure modes of the tension specimens were divided into concrete breakout failure and steel failure, and all shear specimens showed steel failure. In both tension and shear, the maximum loads of specimens were greater than the nominal strengths predicted by the concrete design code (KDS 14 20 54). As a result, it is expected that the current code can also be used to calculate the strength of the developed cast-in anchor.

During the ichthyoplankton survey around the Chilsan Island (previously known as the biggest spawning ground of the Sciaenidae) in the southwestern sea of Korea from April to June in 2019 using ring nets, we collected a total of 12 individuals belonging to the family Sciaenidae. Using molecular methods, we identified five sciaenid species (Collichthys lucidus, Collichthys niveatus, Johnius grypotus, Nibea albiflora, and Pennahia argentata), and described and compared them on the basis of the preflexion larval stage. C. lucidus was well distinguished by the presence of occipital crests at preflexion stage. Although there were no occipital crests, preflexion larva of C. niveatus was distinguished by the absence of melanophore except for the upper part of the abdominal cavity. J. grypotus and N. albiflora were very similar morphologically, but were distinguished by myomere height (15.22-15.53% in J. grypotus vs. 11.66-12.78% in N. albiflora) in the percentage of notochord length, and eye diameter (32.58-33.37% in J. grypotus vs. 40.32-42.53% in N. albiflora) in the percentage of head length between specimens of similar size (J. grypotus: 3.22-3.23 mm, N. albiflora: 3.04-3.13 mm). P. argentata were distinguished by distribution of ventral caudal melanophore (one row of small spot in P. argentata vs. irregular patches on the central part of caudal in J. grypotus and N. albiflora). Comparative morphological studies using more diverse species must be conducted for more comprehensive understanding of the morphogenesis of Sciaenidae.

The activity of anaerobic ammonium oxidation (ANAMMOX) immobilized in synthetic media (Poly Ethylene Glycol, PEG) and granular form was evaluated comparatively to investigate the effect of influent nitrogen concentration and exposure of oxygen. In ANAMMOX granule reactor, when concentration of influent total nitrogen increased to 500mg/L, removal efficiency of ammonium, nitrite and nitrate were shown to 90.5±6.5, 96.6±4.9, and 93.2±6.1%, respectively. In the case of the PEG gel, it showed lower nitrogen removal performance, resulting in that the removal efficiency of ammonium, nitrite and nitrate were shown to 83.3±13.0, 96.4±6.1, and 90.3±7.5%, respectively. In second step, when exposed to oxygen, the nitrogen removal performance in the ANAMMOX granule reactor also remained stable, but the activity of PEG gel ANAMMOX was found to be inhibited. Consequently, the PEG gel ANAMMOX was a higher sensitivity than that of granular ANAMMOX with two variables applied in this study.

메기 (Silurus asotus)를 대상으로 210일간 기아 시 계측 형질 및 체 절단면 형질을 측정하여 그 기아 효과를 조사하였다. 실험 종료시 섭이군의 생존율은 92.2±0.47% 였으며, 기아군에서는 74.4±2.59%의 생존율을 보였다. Ls, DALPO/Ls, DADOP/Ls, ED/Ls, CH/Ls, BDAA/Ls, BDMA/Ls 및 BWAA/Ls의 8개 항목에서 유의한 차이를 보 였으며 (p<0.05), 다른 16개 항목 DALAD/Ls, DPDPL/ Ls, HPLAA/Ls, HALAV/Ls, HALOP/Ls, DAUPO/Ls, DADAV/Ls, DADAA/Ls, Max BL/Ls, Man BL/Ls, LD/Ls, HWOP/Ls, DAUF/HL, DAUS/HL, IW/HL 및 DAUE/HL 에서는 초기군, 섭이군 및 기아군의 세 그룹 간 유의한 차이가 없었다 (p>0.05). 섭이군은 각 체 절단면에서 기아군 보다 더 높은 전체 높이 (THX), 더 넓은 너비 (WX) 및 더 넓은 면적 (AX)을 보였다. 본 연구는 메기의 기아 상태에 대한 외형 및 체 절단면 형질에 대한 정보를 제공한다. 이는 메기에 대한 먹이 조절에 대한 방법을 보조하고 영양상태를 나타내는 기본 기초자료로 활용될 수 있을 것이다. 또 한, 본 연구에서 사용한 조사 분석 방법을 타 어종에서 적용 시 그 영양 상태에 대한 정보를 파악하는 데 유용하게 활용될 수 있을 것으로 사료된다.